Date: Friday, 15 November 2013 - 18:01:32 Architecture: mips OS: Linux Kernel: 3.3.8-2.0 Kernel build: #1 SMP Thu Oct 3 17:55:53 CEST 2013 vusolo2 login: root www.vuplus-support.org home of /$$ /$$ /$$$$$$$$ /$$ | $$ | $$|__ $$__/|__/ | $$ | $$ | $$ /$$ | $$ / $$/ | $$ | $$ \ $$ $$/ | $$ | $$ \ $$$/ | $$ | $$ \ $/ | $$ | $$ \_/ |__/ |__/ Welcome on your Vu+ ! root@vusolo2:~#  clear root@vusolo2:~#  d m e s g Linux version 3.3.8-2.0 (vti@build-vti) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #1 SMP Thu Oct 3 17:55:53 CEST 2013 Fetching vars from bootloader... found 16 vars. Options: moca=0 sata=1 pcie=0 usb=1 Using 1024 MB + 0 MB RAM (from CFE) bootconsole [early0] enabled CPU revision is: 00025a11 (Brcm4380) FPU revision is: 00130001 Determined physical RAM map: memory: 10000000 @ 00000000 (usable) memory: 30000000 @ 20000000 (usable) bmem: adding 57 MB LINUX region at 6 MB (0x03967000@0x00699000) bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000) bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000) bmem: adding 512 MB LINUX region at 768 MB (0x20000000@0x30000000) Zone PFN ranges: Normal 0x00000000 -> 0x00050000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000000 -> 0x00010000 0: 0x00020000 -> 0x00050000 On node 0 totalpages: 262144 free_area_init_node: node 0, pgdat 8063d280, node_mem_map 81000000 Normal zone: 2560 pages used for memmap Normal zone: 0 pages reserved Normal zone: 259584 pages, LIFO batch:31 PERCPU: Embedded 7 pages/cpu @81a09000 s5632 r8192 d14848 u32768 pcpu-alloc: s5632 r8192 d14848 u32768 alloc=8*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259584 Kernel command line: ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. MIPS secondary cache 256kB, 8-way, linesize 128 bytes. Memory: 571940k/1048576k available (5221k kernel code, 476636k reserved, 1233k data, 184k init, 0k highmem) Hierarchical RCU implementation. NR_IRQS:160 Measuring MIPS counter frequency... Detected MIPS clock frequency: 1305 MHz (163.135 MHz counter) Calibrating delay loop... 869.37 BogoMIPS (lpj=434688) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 bcm40nm_pm_moca_disable 00 SMP: Booting CPU1... CPU revision is: 00025a11 (Brcm4380) FPU revision is: 00130001 Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. MIPS secondary cache 256kB, 8-way, linesize 128 bytes. SMP: CPU1 is running Brought up 2 CPUs devtmpfs: initialized NET: Registered protocol family 16 USB0: power enable is active high; overcurrent is active low USB1: power enable is active high; overcurrent is active low bio: create slab at 0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource wktmr NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NTFS driver 2.1.30 [Flags: R/W]. msgmni has been set to 1117 io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS 1 at MMIO 0x10406940 (irq = 66) is a 16550A serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67) is a 16550A loop: module loaded __clk_enable: sata [1] bcm40nm_pm_sata_enable 00 ahci: SSS flag set, parallel bus scan disabled ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode ahci strict-ahci.0: flags: ncq sntf stag clo slum part scsi0 : ahci_platform scsi1 : ahci_platform ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41 ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41 brcmstb_nand: NAND controller driver is loaded __clk_enable: network [1] __clk_enable: enet [1] bcm40nm_pm_genet_enable 00 Found PHY at Address 3 Config GPHY through MDIO __clk_disable: enet [0] bcm40nm_pm_genet_disable 00 __clk_disable: network [0] __clk_enable: network [1] __clk_enable: moca_genet [1] bcm40nm_pm_genet1_enable 00 __clk_enable: moca [1] bcm40nm_pm_moca_enable 00 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: WDC WD7500BPVT-00HXZT3, 01.01A01, max UDMA/133 No PHY detected, not registering interface:1 __clk_disable: moca [0] bcm40nm_pm_moca_disable 00 __clk_disable: moca_genet [0] bcm40nm_pm_genet1_disable 00 __clk_disable: network [0] bcmgenet: probe of bcmgenet.1 failed with error -5 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver __clk_enable: usb [1] bcm40nm_pm_usb_enable 00 ehci-brcm ehci-brcm.0: Broadcom STB EHCI ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300 ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci-brcm ehci-brcm.1: Broadcom STB EHCI ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2 ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA WDC WD7500BPVT-0 01.0 PQ: 0 ANSI: 5 ehci-brcm eh ci-brcm.1: irq 70, io mem 0x10480500 ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected ehci-brcm ehci-brcm.2: Broadcom STB EHCI ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3 sd 1:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 1:0:0:0: [sda] 4096-byte physical blocks ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300 sd 1:0:0:0: Attached scsi generic sg0 type 0 ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected ehci-brcm ehci-brcm.3: Broadcom STB EHCI ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4 sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500 ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00 hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-brcm ohci-brcm.0: Broadcom STB OHCI ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5 ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400 hub 5-0:1.0: USB hub found hub 5-0:1.0: 1 port detected sda: sda1 ohci-brcm ohci-brcm.1: Broadcom STB OHCI sd 1:0:0:0: [sda] Attached SCSI disk ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6 ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600 hub 6-0:1.0: USB hub found hub 6-0:1.0: 1 port detected ohci-brcm ohci-brcm.2: Broadcom STB OHCI ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7 ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400 hub 7-0:1.0: USB hub found hub 7-0:1.0: 1 port detected ohci-brcm ohci-brcm.3: Broadcom STB OHCI ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8 ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600 hub 8-0:1.0: USB hub found hub 8-0:1.0: 1 port detected Initializing USB Mass Storage driver.. . usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mousedev: PS/2 mouse device common for all mice i2c /dev entries driver WARNING: You are using an experimental version of the media stack. As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production. Use it with care. Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): 3151d14aa6e983aa36d51a80d0477859f9ba12af [media] media: remove __dev* annotations 978ae2247fac3b330ecd1095823001d2c08c7efd [media] extract_xc3028.pl: fix permissions 73ec66c000e9816806c7380ca3420f4e0638c40e [media] stv0900: Multistream support IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR SANYO protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' PM: CP0 COUNT/COMPARE frequency does not depend on divisor EBI CS0: setting up NAND flash (primary) NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit) brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 nand_read_bbt: bad block at 0x000005ec0000 nand_read_bbt: bad block at 0x000009040000 Creating 4 MTD partitions on "brcmnand.0": 0x000001f00000-0x000010000000 : "rootfs" 0x0000 01f00000-0x000010000000 : "rootfs(redundant)" 0x000000200000-0x000000900000 : "kernel" 0x000000900000-0x000000a00000 : "mac" UBI: attaching mtd0 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 usb 6-1: new full-speed USB device number 2 using ohci-brcm UBI: max. sequence number: 2190 UBI: attached mtd0 to ubi0 UBI: MTD device name: "rootfs" UBI: MTD device size: 225 MiB UBI: number of good PEBs: 1794 UBI: number of bad PEBs: 6 UBI: number of corrupted PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 1794 UBI: number of PEBs reserved for bad PEB handling: 17 UBI: max/mean erase counter: 70/43 UBI: image sequence number: 1349988572 UBI: background thread "ubi_bgt0d" started, PID 44 UBIFS: parse sync UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: file system size: 223731712 bytes (218488 KiB, 213 MiB, 1762 LEBs) UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) VFS: Mounted root (ubifs filesystem) on device 0:14. devtmpfs: mounted Freeing unused kernel memory: 184k freed NET: Registered protocol family 10 procmk_init dvb_bcm7356: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint DVB: registering new adapter (vusolo2) bcm7356: hotplug_callback(): Hotplug - status.connected 1:0 bcm7356: hotplug_callback(): Hotplug - connecting HDMI to display 0xe [GP]:brcm_pwm_init brcm_demux_init: $Id: bcm_demux.c,v 0.7 $ [VID]: <6>bcm7335_video_init [AUD]: <6>bcm7335_audio_init DVB: registering adapter 0 frontend 0 (BCM7346 FE)... DVB: registering adapter 0 frontend 0 (BCM7346 FE)... [MPVR]: >> misc_pvr_init BKNI_P_GetTrackAllocEntry_resize: resizing from 4096->8192 BKNI_Malloc(linuxkernel) top users: blocks, bytes, filename:line 694, 33312, magnum/portinginterface/vdc/7346/bvdc_bufferheap_priv.c:737 572, 128464, ../BSEAV/lib/utils/balloc.c:35 533, 21320, ../magnum/basemodules/mem/bmem_system.c:286 364, 43680, magnum/commonutils/mrc/7346/bmrc_monitor.c:940 input: dreambox advanced remote control (native) as /devices/virtual/input/input0 [LCD]: registered [CI]: registered ci0 [DFP]: registered dbox fp [DFP]: Scart 9597 is found 4 [SC]: registered sci0 [SC]: registered sci1 system_time_set wakeup mode get system_time_set wakeup mode get 0xc1 fpga update driver loaded udevd (111): /proc/111/oom_adj is deprecated, please use /proc/111/oom_score_adj instead. logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-ohci_hcd-1/input2 [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) __clk_enable: network [1] __clk_enable: enet [1] bcm40nm_pm_genet_enable 00 ADDRCONF(NETDEV_UP): eth0: link is not ready eth0: Link up, 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [VID]: VIDEO_SET_STREAMTYPE 0 [VID]: VIDEO_SELECT_SOURCE 1 [VID]: VIDEO_PLAY 1 2 0 [VID]: VIDEO_CONTINUE 1 1 [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [VID]: VIDEO_STOP 0 1 [VID]: VIDEO_SELECT_SOURCE 0 [LCD]: unknown cmd 0x1015 [CI]: CI interface initialised [AUD]: AUDIO_SET_MUTE 0 [AUD]: AUDIO_SET_MIXER -848634392 [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0 [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0 [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [AUD]: AUDIO_SET_MIXER -848634392 [AUD]: AUDIO_SET_MIXER : amixl 51, amixr 51 [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [AUD]: AUDIO_SET_MIXER : next left volume -3712, right volume -3712 FE tune [AUD]: AUDIO_SET_BYPASS_MODE 1 [AUD]: downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [VID]: VIDEO_SET_STREAMTYPE 1 [VID]: VIDEO_FREEZE 1 0 [VID]: VIDEO_PLAY 1 5 2 [VID]: VIDEO_SLOWMOTION 0 1 [VID]: VIDEO_FAST_FORWARD 0 1 [VID]: VIDEO_CONTINUE 1 1 [AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc94da900 [AUD]: setting mute : 0 [AUD]: AUDIO_CHANNEL_SELECT 0 [AUD]: AUDIO_STOP 1 [AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0 [AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0 [AUD]: AUDIO_SET_BYPASS_MODE 0 [AUD]: AC3 downmix 0 state : 0 [AUD]: AUDIO_PAUSE 1 [AUD]: AUDIO_PLAY 1 decoder start : 0 [AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xc94da900 [AUD]: setting mute : 0 root@vusolo2:~#