BCM74130011 012 K1 K2 K3 K4 K5 Shmoo Version=3.8 DDR Freq=0x0000018C %00000001% RC1=00000005 WC1=FFFFFFEA RC2=0000001B WC2=00000034 RC3=00000010 WC3=FFFFFFEA RC4=00000010 WC4=00000035 NWC=0000000F RC5=00000005 WC5=0000000F RC6=0000001A WC6=0000000F NRC=0000000F RW=00000016 WW=0000004C G=00000000 R=0000000F W=0000000F BL=00000000 RC1=00000005 RC2=00000018 BL=00000001 RC1=00000005 RC2=00000019 BL=00000002 RC1=00000005 RC2=00000016 BL=00000003 RC1=00000006 RC2=00000018 BL=00000004 RC1=00000005 RC2=00000019 BL=00000005 RC1=00000006 RC2=0000001A BL=00000006 RC1=00000003 RC2=00000016 BL=00000007 RC1=00000004 RC2=00000018 SCfC3 COPY CODE COMPARE CODE 4567 BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little Build Date: Wed Mar 23 23:28:45 WEST 2011 (Administrator@buildserver) Copyright (C) Broadcom Corporation. start cfe init device sec-0 nblks=8 blksiz=8192 sec-1 nblks=63 blksiz=65536 Enabling NAND flash at CS1, NOR flash at CS0 NAND Flash size = 128MB CPU speed: 405MHz Memory Config: 64-bit UMA Device Tech: 512Mb Total memory: 256MB Boot Device: NOR Total flash: 4MB Initializing USB. USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub CFE initialized. Set default GPIO... USB: New device connected to bus 1 hub 1 port 1 USB: Resetting device on bus 1 port 1 USB: Locating Class 09 Vendor 1A40 Product 0101: USB Hub USB: New device connected to bus 1 hub 2 port 2 USB: Resetting device on bus 1 port 2 USB: Locating Class 02 Vendor DEAD Product BEEF: Ethernet Device USB: [Transfer error: 4] USB CDC Device (00:00:00:00:00:00) Starting splash screen. *************************************************** Found splash image - Width = 720 Height = 576 bmp ptr : 0x8fa00000 , surface ptr : 0xafc00000 *************************************************** Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null) Loading: !!!!! UNC read error occurred, while reading from NAND flash -1 0x80001000/4947652 0x804b8ec4/160080 Entry address is 0x80492000 TP1 Entry Address at 0x80000ffc = 80492000 Starting program at 0x80492000 <5>Linux version 2.6.18-7.4 (build@buildserver) (gcc version 4.4.4 (GCC) ) #1 SMP Sun Apr 17 04:54:28 CEST 2011 Fetching vars from bootloader... OK (E,D,B,c) Detected 256 MB on MEMC0 (strap 0x22be0010) CFE EnvVar: SPLASH_PART_STARTAD: 00080000, SPLASH_PART_SIZE: 00200000 CFE EnvVar: LINUX_PART_STARTAD: 00000000, LINUX_PART_SIZE: 00400000 Default command line = mem=128M root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200 g_board_RAM_size=256MB Options: sata=1 enet=1 emac_1=1 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=1 CPU revision is: 0002a044 FPU revision is: 00130001 Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes. Primary data cache 64kB, 4-way, linesize 64 bytes. <6>Synthesized TLB refill handler (23 instructions). <6>Synthesized TLB load handler fastpath (37 instructions). <6>Synthesized TLB store handler fastpath (37 instructions). <6>Synthesized TLB modify handler fastpath (36 instructions). Determined physical RAM map: memory: 10000000 @ 00000000 (usable) User-defined physical RAM map: node [00000000, 08000000: RAM] node [08000000, 08000000: RSVD] <5>Reserving 128 MB upper memory starting at 08000000 <7>On node 0 totalpages: 65536 <7> DMA zone: 65536 pages, LIFO batch:15 Built 1 zonelists. Total pages: 65536 <5>Kernel command line: mem=128M root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200 PID hash table entries: 2048 (order: 11, 8192 bytes) Found MIPS counter frequency: 203 Mhz Using 202.501 MHz high precision timer. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 123520k/262144k available (3885k kernel code, 138388k reserved, 787k data, 156k init, 0k highmem) Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. plat_prepare_cpus: ENABLING 2nd Thread... TP0: prom_boot_secondary: Kick off 2nd CPU... CPU revision is: 0002a044 FPU revision is: 00130001 Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes. Primary data cache 64kB, 4-way, linesize 64 bytes. Synthesized TLB refill handler (23 instructions). Brought up 2 CPUs migration_cost=1000 NET: Registered protocol family 16 PCI->SDRAM window size: 512MB SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42) NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered brcm-pm: disabling power to USB block brcm-pm: disabling power to ENET block brcm-pm: disabling power to SATA block NTFS driver 2.1.27 [Flags: R/W]. JFFS2 version 2.2. (NAND) (SUMMARY) (C) 2001-2006 Red Hat, Inc. SGI XFS with no debug enabled Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 22) is a 16550A brcm-pm: enabling power to ENET block Broadcom BCM7413 P21 Ethernet Network Device v2.0 Apr 17 2011 04:52:37 Config Internal PHY Through MDIO: 100 MB Full-Duplex (auto-neg) bcmemac: no PHY detected on EMAC_1, disabling brcm-pm: enabling power to SATA block PCI: Enabling device 0000:01:00.0 (0000 -> 0003) ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42 ata2: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42 scsi0 : sata_svw ata1: SATA link down (SStatus 4 SControl 300) ATA: abnormal status 0x7F on port 0xb051001c scsi1 : sata_svw ata2: SATA link down (SStatus 4 SControl 300) ATA: abnormal status 0x7F on port 0xb051011c Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank NOR chip too large to fit in mapping. Attempting to cope... Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Reducing visibility of 4096KiB chip to 2048KiB BCM97XXX flash device: 0x00400000 bytes @ 0x1fc00000 Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Broadcom STB NAND controller (BrcmNand Controller) i=1, CS[0] = 1 NAND_CS_NAND_XOR=00000000 Disabling XOR on CS#1 B4: NandSelect=50000000, nandConfig=15142200, chipSelect=1 brcmnand_probe: CS1: dev_id=ecf10095 After: NandSelect=50000000, nandConfig=15142200 NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11 busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff timing1 not adjusted: 5363444f timing2 not adjusted: 00000fc6 BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB Found NAND: ACC=d7ff1010, cfg=15142200, flashId=ecf10095, tim1=5363444f, tim2=00000fc6 BrcmNAND version = 0x0302 128MB @00000000 B4: NandSelect=50000000, nandConfig=15142200, chipSelect=1 brcmnand_probe: CS1: dev_id=ecf10095 After: NandSelect=50000000, nandConfig=15142200 Found NAND chip on Chip Select 1, chipSize=128MB, usable size=128MB, base=0x brcmnand_scan: B4 nand_select = 50000000 brcmnand_scan: After nand_select = 50000000 ACC_CONTROL for SLC NAND: d7ff1010, eccLevel=15 SLC flash: ACC_CONTROL = d7ff1010 page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17 Brcm NAND controller version = 3.2 NAND flash size 128MB @18000000 mtd->oobsize=64, mtd->eccOobSize=16 brcmnand_scan: mtd->oobsize=64 brcmnand_scan: oobavail=50, eccsize=512, writesize=2048 brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3 brcmnand_default_bbt: bbt_td = bbt_main_descr brcmnandCET: Status -> Deferred numchips=1, size=8000000 Creating 4 MTD partitions on "bcm7xxx-nand.0": 0x0000000000000000-0x0000000008000000 : "complete" 0x0000000000000000-0x0000000000400000 : "kernel" 0x0000000000400000-0x0000000000600000 : "boot" 0x0000000000600000-0x0000000008000000 : "rootfs" usbmon: debugfs is not available ehci_hcd_brcm_init: Initializing 2 EHCI controller(s) brcm-pm: enabling power to USB block 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0) drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller - USB h/w setup mode - USB power enable set for active LOW mode brcm-ehci brcm-ehci.0: BRCM EHCI brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1 brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300 brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-1) drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller brcm-ehci-1 brcm-ehci-1.1: BRCM EHCI brcm-ehci-1 brcm-ehci-1.1: new USB bus registered, assigned bus number 2 brcm-ehci-1 brcm-ehci-1.1: irq 57, io mem 0x10480500 brcm-ehci-1 brcm-ehci-1.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd_brcm_init: Initializing 2 OHCI controller(s) 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0) drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller - Resetting at b0480408 <-- brcm_start_hc brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 3 brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1) usb 2-1: new high speed USB device using brcm-ehci-1 and address 2 drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller - Resetting at b0480608 <-- brcm_start_hc brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 4 brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480600 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected Initializing USB Mass Storage driver... usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 3 usb 2-1.2: configuration #1 chosen from 1 choice usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new driver pegasus drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27) usbcore: registered new driver rtl8150 usbcore: registered new driver asix usbcore: registered new driver cdc_ether usbcore: registered new driver net1080 usbcore: registered new driver zaurus i2c /dev entries driver Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). ALSA device list: No soundcards found. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Mounted root (jffs2 filesystem). Freeing unused kernel memory: 156k freed INIT: version 2.86 booting Please wait: booting... mount: sysfs already mounted or /sys busy mount: according to mtab, sysfs is already mounted on /sys Root filesystem already rw, not remounting cdfs 2.6.18 loaded. usbcore: registered new driver tpm modloader: module license 'PROPRIETARY' taints kernel. input: dreambox advanced remote control (native) as /class/input/input0 DVB: registering new adapter (dvb0) DVB: registering adapter 0 frontend 0 (DVB-S2)... input: front panel as /class/input/input1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver usbcore: registered new driver rt73 usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: USB disconnect, address 2 usb 2-1.2: USB disconnect, address 3 usb 2-1: clear tt 1 (9032) error -71 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: clear tt 1 (9032) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 4 ALSA: Restoring mixer settings... usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected Configuring network interfaces... usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 5 usb 2-1.2: configuration #1 chosen from 1 choice eth0 no wireless extensions. udhcpc (v1.15.3) started Sending discover... Sending select for 192.168.1.247... Lease of 192.168.1.247 obtained, lease time 43200 adding dns 192.168.1.1 done. Starting portmap daemon: portmap. Mounting remote filesystems... vm.dirty_writeback_centisecs = 300 vm.dirty_background_ratio = 1 vm.dirty_ratio = 60 hwclock: can't open '/dev/misc/rtc': No such file or directory date: invalid date '050523592011' hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: Entering runlevel: 3 Starting system message bus: dbus. Starting Dropbear SSH server: dropbear. Starting internet superserver: inetd. usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: USB disconnect, address 4 usb 2-1.2: USB disconnect, address 5 usb 2-1: clear tt 1 (9052) error -71 usb 2-1: clear tt 1 (9052) error -19 usb 2-1: clear tt 1 (9052) error -19 usb 2-1: clear tt 1 (9052) error -19 usb 2-1: clear tt 1 (9052) error -19 usb 2-1: clear tt 1 (9052) error -19 usb 2-1: clear tt 1 (9052) error -19 usb 2-1: clear tt 1 (9052) error -19 usb 2-1: clear tt 1 (9052) error -19 usb 2-1: clear tt 1 (9052) error -19 usb 2-1: clear tt 1 (9052) error -19 usb 2-1: clear tt 1 (9052) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 6 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 7 usb 2-1.2: configuration #1 chosen from 1 choice Starting Samba: smbdusb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: USB disconnect, address 6 usb 2-1.2: USB disconnect, address 7 usb 2-1: clear tt 1 (9072) error -71 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: clear tt 1 (9072) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 8 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected nmbdusb 2-1.2: new full speed USB device using brcm-ehci-1 and address 9 usb 2-1.2: configuration #1 chosen from 1 choice usb 2-1: clear tt 1 (9092) error -71 usb 2-1: clear tt 1 (9092) error -71 usb 2-1: clear tt 1 (9092) error -71 usb 2-1: clear tt 1 (9092) error -71 usb 2-1: clear tt 1 (9092) error -71 usb 2-1: clear tt 1 (9092) error -71 usb 2-1: clear tt 1 (9092) error -71 usb 2-1: clear tt 1 (9092) error -71 usb 2-1: USB disconnect, address 8 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1: clear tt 1 (9092) error -19 usb 2-1.2: USB disconnect, address 9 . Starting syslogd/klogd: done usb 2-1: new high speed USB device using brcm-ehci-1 and address 10 * starting FTP Server: vsftpd... done. * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected ...done. usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 11 usb 2-1.2: configuration #1 chosen from 1 choice usb 2-1: clear tt 1 (90b2) error -71 usb 2-1: clear tt 1 (90b2) error -71 usb 2-1: USB disconnect, address 10 usb 2-1.2: USB disconnect, address 11 usb 2-1: clear tt 1 (90b2) error -71 usb 2-1: clear tt 1 (90b2) error -19 usb 2-1: clear tt 1 (90b2) error -19 usb 2-1: clear tt 1 (90b2) error -19 usb 2-1: clear tt 1 (90b2) error -19 usb 2-1: clear tt 1 (90b2) error -19 usb 2-1: clear tt 1 (90b2) error -19 usb 2-1: clear tt 1 (90b2) error -19 usb 2-1: clear tt 1 (90b2) error -19 usb 2-1: clear tt 1 (90b2) error -19 usb 2-1: clear tt 1 (90b2) error -19 usb 2-1: clear tt 1 (90b2) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 12 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 13 usb 2-1.2: configuration #1 chosen from 1 choice usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: clear tt 1 (90d2) error -71 usb 2-1: USB disconnect, address 12 usb 2-1.2: USB disconnect, address 13 brcm-ehci-1 brcm-ehci-1.1: qh a7950200 (#82) state 4(has tds) usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: clear tt 1 (90d2) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 14 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 15 usb 2-1.2: configuration #1 chosen from 1 choice [FREESAT] Init tables usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: clear tt 1 (90f2) error -71 usb 2-1: USB disconnect, address 14 usb 2-1.2: USB disconnect, address 15 brcm-ehci-1 brcm-ehci-1.1: qh a7950280 (#82) state 4(has tds) usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: clear tt 1 (90f2) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 16 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 17 usb 2-1.2: configuration #1 chosen from 1 choice JFFS2 notice: (31) check_node_data: wrong data CRC in data node at 0x062d3800: read 0x49161ee4, calculated 0x75a87154. JFFS2 notice: (31) check_node_data: wrong data CRC in data node at 0x048ae000: read 0x6d19cceb, calculated 0xda57ec9d. PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser + (5) main http server [NET] httpd server started on port 8080 + (5) Tuxtxt + (8) graphics acceleration manager + (9) GFBDC 8100k video mem - double buffering available! 4860kB available for acceleration surfaces. resolution: 720 x 576 x 32 (stride: 2880) + (9) gLCDDC couldn't open LCD - load lcd.o! lcd buffer 0x6f2ad0 8448 bytes, stride 132 + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) Hdmi CEC driver + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "dreambox advanced remote control (native)" is not a keyboard. Input device "front panel" is not a keyboard. Found 2 input devices! + (21) Console RC Driver failed to open /dev/vc/0 + (30) eActionMap + (35) CI Slots scanning for common interfaces.. eDVBCIInterfaces->setInputSource(0, 0) eDVBCIInterfaces->setInputSource(1, 1) done, found 0 common interface slots + (35) CA handler + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryM2TS eServiceFactoryM2TS aborted, no /usr/lib/libpassthrough.so + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB reached rl 70 ---- opening lame channel db reading services (version 4) usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: USB disconnect, address 16 usb 2-1.2: USB disconnect, address 17 usb 2-1: clear tt 1 (9112) error -71 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: clear tt 1 (9112) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 18 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected loaded 7292 services scanning for frontends.. opening frontend 0 usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 19 usb 2-1.2: configuration #1 chosen from 1 choice main thread is non-idle! display spinner! no spinner DC! detected satellite frontend close frontend 0 found 1 adapter, 1 frontends(1 sim) and 7 demux, boxtype 3 RTC not ready... wait for transponder time [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... found 4 spinner! executing main setIoPrio best-effort level 3 ok /proc/stb/frontend/0/lnb_sense is 0 enumerating block devices... main thread is non-idle! display spinner! Reading satellites.xml main thread is non-idle! display spinner! sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr AVL2108, need rotorworkaround No, enabled Yes, DVB-S2 Yes slot: 0 configmode: simple diseqcmode: diseqc_a_b_c_d sec config completed loading bouquet... /etc/enigma2/bouquets.tv loading bouquet... /etc/enigma2/userbouquet.favourites.tv 0 entries in Bouquet userbouquet.favourites.tv loading bouquet... /etc/enigma2/userbouquet.dbe17.tv 106 entries in Bouquet userbouquet.dbe17.tv loading bouquet... /etc/enigma2/userbouquet.dbe00.tv 76 entries in Bouquet userbouquet.dbe00.tv loading bouquet... /etc/enigma2/userbouquet.dbe08.tv 356 entries in Bouquet userbouquet.dbe08.tv loading bouquet... /etc/enigma2/userbouquet.dbe02.tv 300 entries in Bouquet userbouquet.dbe02.tv loading bouquet... /etc/enigma2/userbouquet.dbe01.tv 498 entries in Bouquet userbouquet.dbe01.tv loading bouquet... /etc/enigma2/userbouquet.dbe03.tv 216 entries in Bouquet userbouquet.dbe03.tv loading bouquet... /etc/enigma2/userbouquet.dbe05.tv 172 entries in Bouquet userbouquet.dbe05.tv loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 257 entries in Bouquet userbouquet.dbe06.tv loading bouquet... /etc/enigma2/userbouquet.dbe07.tv 26 entries in Bouquet userbouquet.dbe07.tv loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 173 entries in Bouquet userbouquet.dbe09.tv loading bouquet... /etc/enigma2/userbouquet.humor.tv 38 entries in Bouquet userbouquet.humor.tv loading bouquet... /etc/enigma2/userbouquet.dbe0a.tv 157 entries in Bouquet userbouquet.dbe0a.tv loading bouquet... /etc/enigma2/userbouquet.dbe0b.tv 72 entries in Bouquet userbouquet.dbe0b.tv loading bouquet... /etc/enigma2/userbouquet.dbe0c.tv 94 entries in Bouquet userbouquet.dbe0c.tv loading bouquet... /etc/enigma2/userbouquet.dbe04.tv 29 entries in Bouquet userbouquet.dbe04.tv loading bouquet... /etc/enigma2/userbouquet.dbe0d.tv 208 entries in Bouquet userbouquet.dbe0d.tv loading bouquet... /etc/enigma2/userbouquet.dbe0e.tv 123 entries in Bouquet userbouquet.dbe0e.tv loading bouquet... /etc/enigma2/userbouquet.dbe0f.tv 12 entries in Bouquet userbouquet.dbe0f.tv loading bouquet... /etc/enigma2/userbouquet.dbe10.tv 11 entries in Bouquet userbouquet.dbe10.tv loading bouquet... /etc/enigma2/userbouquet.dbe11.tv 192 entries in Bouquet userbouquet.dbe11.tv loading bouquet... /etc/enigma2/userbouquet.dbe12.tv 114 entries in Bouquet userbouquet.dbe12.tv loading bouquet... /etc/enigma2/userbouquet.dbe16.tv 315 entries in Bouquet userbouquet.dbe16.tv loading bouquet... /etc/enigma2/userbouquet.dbe13.tv 11 entries in Bouquet userbouquet.dbe13.tv loading bouquet... /etc/enigma2/userbouquet.dbe15.tv 352 entries in Bouquet userbouquet.dbe15.tv loading bouquet... /etc/enigma2/userbouquet.luxemburg.tv 3 entries in Bouquet userbouquet.luxemburg.tv loading bouquet... /etc/enigma2/userbouquet.dbe19.tv 303 entries in Bouquet userbouquet.dbe19.tv loading bouquet... /etc/enigma2/userbouquet.dbe18.tv 36 entries in Bouquet userbouquet.dbe18.tv loading bouquet... /etc/enigma2/userbouquet.dbe1a.tv 233 entries in Bouquet userbouquet.dbe1a.tv loading bouquet... /etc/enigma2/userbouquet.dbe1b.tv 155 entries in Bouquet userbouquet.dbe1b.tv loading bouquet... /etc/enigma2/userbouquet.voormalig_joego.tv 13 entries in Bouquet userbouquet.voormalig_joego.tv loading bouquet... /etc/enigma2/userbouquet.dbe1c.tv 17 entries in Bouquet userbouquet.dbe1c.tv loading bouquet... /etc/enigma2/userbouquet.___3d_tv___.tv 20 entries in Bouquet userbouquet.___3d_tv___.tv loading bouquet... /etc/enigma2/userbouquet.dbe1d.tv 21 entries in Bouquet userbouquet.dbe1d.tv loading bouquet... /etc/enigma2/userbouquet.dbe1f.tv 85 entries in Bouquet userbouquet.dbe1f.tv loading bouquet... /etc/enigma2/userbouquet.reacties__specials_detransponder_nl.tv 0 entries in Bouquet userbouquet.reacties__specials_detransponder_nl.tv 36 entries in Bouquet bouquets.tv loading bouquet... /etc/enigma2/bouquets.radio loading bouquet... /etc/enigma2/userbouquet.dbe05.radio 30 entries in Bouquet userbouquet.dbe05.radio loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 26 entries in Bouquet userbouquet.dbe00.radio loading bouquet... /etc/enigma2/userbouquet.dbe03.radio 139 entries in Bouquet userbouquet.dbe03.radio loading bouquet... /etc/enigma2/userbouquet.dbe02.radio 86 entries in Bouquet userbouquet.dbe02.radio loading bouquet... /etc/enigma2/userbouquet.dbe0c.radio 8 entries in Bouquet userbouquet.dbe0c.radio loading bouquet... /etc/enigma2/userbouquet.dbe01.radio 50 entries in Bouquet userbouquet.dbe01.radio loading bouquet... /etc/enigma2/userbouquet.dbe04.radio 55 entries in Bouquet userbouquet.dbe04.radio loading bouquet... /etc/enigma2/userbouquet.dbe0a.radio 14 entries in Bouquet userbouquet.dbe0a.radio loading bouquet... /etc/enigma2/userbouquet.dbe06.radio 104 entries in Bouquet userbouquet.dbe06.radio loading bouquet... /etc/enigma2/userbouquet.dbe0b.radio 14 entries in Bouquet userbouquet.dbe0b.radio loading bouquet... /etc/enigma2/userbouquet.luxemburg.radio 2 entries in Bouquet userbouquet.luxemburg.radio loading bouquet... /etc/enigma2/userbouquet.oost_europa.radio 54 entries in Bouquet userbouquet.oost_europa.radio loading bouquet... /etc/enigma2/userbouquet.dbe08.radio 31 entries in Bouquet userbouquet.dbe08.radio loading bouquet... /etc/enigma2/userbouquet.dbe07.radio 19 entries in Bouquet userbouquet.dbe07.radio loading bouquet... /etc/enigma2/userbouquet.turks.radio 7 entries in Bouquet userbouquet.turks.radio loading bouquet... /etc/enigma2/userbouquet.voormalig_joego.radio 22 entries in Bouquet userbouquet.voormalig_joego.radio loading bouquet... /etc/enigma2/userbouquet.dbe09.radio 19 entries in Bouquet userbouquet.dbe09.radio loading bouquet... /etc/enigma2/userbouquet.afrika.radio 22 entries in Bouquet userbouquet.afrika.radio loading bouquet... /etc/enigma2/userbouquet.arabisch.radio 97 entries in Bouquet userbouquet.arabisch.radio loading bouquet... /etc/enigma2/userbouquet.china.radio 3 entries in Bouquet userbouquet.china.radio loading bouquet... /etc/enigma2/userbouquet.religie.radio 20 entries in Bouquet userbouquet.religie.radio loading bouquet... /etc/enigma2/userbouquet.9_oost.radio 72 entries in Bouquet userbouquet.9_oost.radio loading bouquet... /etc/enigma2/userbouquet.favourites.radio 0 entries in Bouquet userbouquet.favourites.radio 23 entries in Bouquet bouquets.radio [eDVBLocalTimeHandler] enable sync local time with transponder time! /usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead add dreampackage scanner plugin added [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) - double buffering available! 900kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs) Unknown device type: front panel --> setting scaler_sharpness to: 0000000D couldn't open /proc/stb/misc/12V_output [SETTING] getFlushSize= 0 [SETTING] getDemuxSize= 1540096 [ePopen] command: ip -o addr Activating keymap: Keyboard English [ePopen] command: loadkmap < /usr/share/keymaps/eng.kmap Activating language Nederlands language set to nl_NL FIXME: request for unknown slot FIXME: request for unknown slot FIXME: request for unknown slot FIXME: request for unknown slot [WebInterface] set language to nl [WebInterface] set language to nl /usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead [WebInterface] fallback to default translation for Webinterface [AudioSync] set language to nl [AudioSync] set language to nl Plugin SystemPlugins/VuPlus-NFI-Backup failed to load: No module named VuPlus-NFI-Backup.plugin Traceback (most recent call last): File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 57, in readPluginList File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import ImportError: No module named VuPlus-NFI-Backup.plugin skipping plugin. getModeList for port DVI-PC remove DVI-PC because of not existing modes getModeList for port YPbPr getModeList for port Scart getModeList for port DVI hotplug on dvi -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto setMode - port: DVI mode: 720p rate: multi -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto Plugin SystemPlugins/VuPlus-USB-Backup failed to load: No module named VuPlus-USB-Backup.plugin Traceback (most recent call last): File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 57, in readPluginList File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import ImportError: No module named VuPlus-USB-Backup.plugin skipping plugin. starting hotplug handler It's now Sat Jan 1 01:01:04 2000 [timer.py] next activation: 946684964 (in 99826 ms) wasTimerWakeup failed! It's now Sat Jan 1 01:01:04 2000 [timer.py] next activation: 946684964 (in 99820 ms) [Toplevel.importExternalModules] Could NOT import external module: AutoTimer [Toplevel.importExternalModules] Exception Caught No module named AutoTimer.AutoTimerResource [Toplevel.importExternalModules] Could NOT import external module: EPGRefresh [Toplevel.importExternalModules] Exception Caught No module named EPGRefresh.EPGRefreshResource [Toplevel.importExternalModules] Imported external module: Example [Webinterface] started on 0.0.0.0:80 auth=False ssl=False [WebInterface.registerBonjourService] No module named Bonjour.Bonjour [WebInterface.unregisterBonjourService] No module named Bonjour.Bonjour [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat' not showing fine-tuning wizard, config variable doesn't exist showtestcard is false [SKIN] Parsing embedded skin setValue 50 Setvolume: 100 100 (raw) Setvolume: 0 0 (-1db) Setvolume: 50 50 (raw) Setvolume: 32 32 (-1db) [Trashcan] gotRecordEvent None None RemovePopup, id = ZapError playing 1:0:19:51D6:C96:3:EB0000:0:0:0: accel 8704 bytes accel memstat: used=0 kB, free 900 kB, s 0 kB accel memory: 0 not pauseable. RemovePopup, id = ZapError allocate channel.. 0c96:0003 opening frontend 0 (0)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 12129000 Pol 1 SR 27500000 INV 2 FEC 4 orbpos 235 system 1 modulation 1 pilot 2, rolloff 0 tuning to 1529 mhz OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:19:51D6:C96:3:EB0000:0:0:0: allocate demux child has terminated pipes closed child has terminated pipes closed [ePopen] command: route -n | grep eth0 poll: unhandled POLLERR/HUP/NVAL for fd 25(16) poll: unhandled POLLERR/HUP/NVAL for fd 27(17) [SEC] set static current limiting set sequence pos 3 child has terminated pipes closed 192.168 169.254 0.0.0.0 nameservers: [[192, 168, 1, 1]] read configured interface: {'bnep0': {'dhcp': True}, 'usb0': {'dhcp': False}, 'lo': {'dhcp': False}, 'usbd0': {'dhcp': False}, 'usbf': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'atml0': {'dhcp': True}, 'eth1': {'dhcp': True}, 'eth0': {'dhcp': True}} self.ifaces after loading: {'eth0': {'preup': False, 'ip': [192, 168, 1, 247], 'up': True, 'netmask': [255, 255, 255, 0], 'dhcp': True, 'bcast': [192, 168, 1, 255], 'gateway': [192, 168, 1, 1], 'postdown': False}} poll: unhandled POLLERR/HUP/NVAL for fd 26(16) set sequence pos 4 [SEC] setVoltage 1 [SEC] sleep 200ms [SEC] invalidate current switch params [SEC] sendDiseqc: e00000(DiSEqC reset) [SEC] sleep 50ms [SEC] sendDiseqc: e00003(DiSEqC peripherial power on) [SEC] sleep 150ms [SEC] sendDiseqc: e01038f5 [SEC] sleep 50ms set sequence pos 3 [SEC] setTone 1 [SEC] sleep 10ms [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 0 [SEC] sleep 500ms (0)fe event: status 0, inversion off, m_tuning 1 (0)fe event: status 1f, inversion off, m_tuning 2 OURSTATE: ok [eDVBLocalTimerHandler] channel 0x2c510288 running no version filtering 0014: 70 00 00 00 00 00 mask: fc 00 00 00 00 00 mode: 00 00 00 00 00 00 [eEPGCache] channel 0x2c510288 running stop release channel timer no version filtering 0012: 4e 51 d6 00 00 00 mask: ff ff ff 00 00 00 mode: 00 00 00 00 00 00 ok ... now we start!! no version filtering 0000: 00 00 00 00 00 00 mask: ff 00 00 00 00 00 mode: 00 00 00 00 00 00 eventNewProgramInfo 0 0 have 1 video stream(s) (0208), and 1 audio stream(s) (0060), and the pcr pid is 0208, and the text pid is 0028 allocate demux TuxTxt cache cleared disable teletext subtitles decoder state: play, vpid=520, apid=96 DMX_SET_PES_FILTER(0x208) - pcr - ok DEMUX_START - pcr - ok DMX_SET_PES_FILTER(0x60) - audio - ok DEMUX_START - audio - ok AUDIO_SET_BYPASS(0) - ok AUDIO_PAUSE - ok AUDIO_PLAY - ok Video Device: /dev/dvb/adapter0/video0 demux device: /dev/dvb/adapter0/demux0 VIDEO_SET_STREAMTYPE 1 - ok DMX_SET_PES_FILTER(0x208) - video - ok DEMUX_START - video - ok VIDEO_FREEZE - ok VIDEO_PLAY - ok DMX_SET_PES_FILTER(0x28) - ttx - ok DEMUX_START - ttx - ok TuxTxt cache cleared TuxTxt: initialized TuxTxt service started 28 VIDEO_SLOWMOTION(0) - ok VIDEO_FAST_FORWARD(0) - ok VIDEO_CONTINUE - ok AUDIO_CONTINUE - TuxTxt running thread...(028) ok AUDIO_CHANNEL_SELECT(0) - ok + 1/1 TID 00 done! PATready use pmtpid 0a5a for service_id 51d6 no version filtering 0a5a: 02 51 d6 00 00 00 mask: ff ff ff 00 00 00 mode: 00 00 00 00 00 00 doing version filtering 0000: 00 00 00 31 00 00 mask: ff 00 00 3f 00 00 mode: 00 00 00 3e 00 00 [SEC] set dynamic current limiting + 1/1 TID 02 done! eventNewProgramInfo 0 0 have 1 video stream(s) (0208), and 1 audio stream(s) (0060), and the pcr pid is 0208, and the text pid is 0028 decoder state: play, vpid=520, apid=96 [eDVBCAService] new service 1:0:19:51D6:C96:3:EB0000:0:0:0: [eDVBCAService] add demux 0 to slot 0 service 1:0:19:51D6:C96:3:EB0000:0:0:0: [eDVBCIInterfaces] gotPMT demux 0 mask 01 prevhash 00000000 doing version filtering 0a5a: 02 51 d6 0b 00 00 mask: ff ff ff 3f 00 00 mode: 00 00 00 3e 00 00 +- 1/2 TID 4e VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok sdt update done! [eDVBLocalTimerHandler] dont have correction.. set Transponder Diff [eDVBLocalTimerHandler] update RTC [eDVBLocalTimerHandler] time update to 01:12:05 [eDVBLocalTimerHandler] m_time_difference is 357952256 [eDVBLocalTimerHandler] set Linux Time [EPGC] time updated.. start EPG Mainloop before: 1 after: 1 [EPGC] 1893 events read from /hdd/epg.dat [EPGC] 239567 bytes for cache used [EPGC] next update in 2 sec ++ 2/2 TID 4e done! doing version filtering 0012: 4e 51 d6 05 00 00 mask: ff ff ff 3f 00 00 mode: 00 00 00 3e 00 00 [EPGC] start caching events(1304637127) usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: clear tt 1 (9132) error -71 usb 2-1: USB disconnect, address 18 usb 2-1.2: USB disconnect, address 19 brcm-ehci-1 brcm-ehci-1.1: qh a7950300 (#82) state 4(has tds) usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: clear tt 1 (9132) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 20 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 21 usb 2-1.2: configuration #1 chosen from 1 choice [EPGC] abort non avail schedule other reading [EPGC] abort non avail netmed schedule reading [EPGC] abort non avail netmed schedule other reading [EPGC] abort non avail FreeSat schedule_other reading [EPGC] abort non avail viasat reading usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: USB disconnect, address 20 usb 2-1.2: USB disconnect, address 21 usb 2-1: clear tt 1 (9152) error -71 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: clear tt 1 (9152) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 22 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 23 usb 2-1.2: configuration #1 chosen from 1 choice [EPGC] nownext finished(1304637142) usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: clear tt 1 (9172) error -71 usb 2-1: USB disconnect, address 22 usb 2-1.2: USB disconnect, address 23 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 usb 2-1: clear tt 1 (9172) error -19 [EPGC] 324152 bytes for cache used usb 2-1: new high speed USB device using brcm-ehci-1 and address 24 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 25 usb 2-1.2: configuration #1 chosen from 1 choice usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: USB disconnect, address 24 usb 2-1: clear tt 1 (9192) error -71 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1: clear tt 1 (9192) error -19 usb 2-1.2: USB disconnect, address 25 usb 2-1: new high speed USB device using brcm-ehci-1 and address 26 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 27 usb 2-1.2: configuration #1 chosen from 1 choice usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: USB disconnect, address 26 usb 2-1.2: USB disconnect, address 27 usb 2-1: clear tt 1 (91b2) error -71 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: clear tt 1 (91b2) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 28 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 29 usb 2-1.2: configuration #1 chosen from 1 choice usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: clear tt 1 (91d2) error -71 usb 2-1: USB disconnect, address 28 usb 2-1.2: USB disconnect, address 29 brcm-ehci-1 brcm-ehci-1.1: qh a7950380 (#82) state 4(has tds) usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: clear tt 1 (91d2) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 30 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 31 usb 2-1.2: configuration #1 chosen from 1 choice It's now Fri May 6 01:13:39 2011 [timer.py] next activation: 1304637320 (in 99999 ms) It's now Fri May 6 01:13:40 2011 [timer.py] next activation: 1304637320 (in 99998 ms) [EPGC] schedule finished(1304637224) [EPGC] stop caching events(1304637224) [EPGC] next update in 60 min [EPGC] 361249 bytes for cache used usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: USB disconnect, address 30 usb 2-1.2: USB disconnect, address 31 usb 2-1: clear tt 1 (91f2) error -71 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: clear tt 1 (91f2) error -19 usb 2-1: new high speed USB device using brcm-ehci-1 and address 32 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.2: new full speed USB device using brcm-ehci-1 and address 33 usb 2-1.2: configuration #1 chosen from 1 choice usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 hub 2-1:1.0: hub_port_status failed (err = -71) hub 2-1:1.0: hub_port_status failed (err = -71) usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71 usb 2-1: clear tt 1 (9212) error -71