-
Items
5745 -
Registratiedatum
-
Laatst bezocht
-
Dagen gewonnen
4
Inhoudstype
Profielen
Forums
Store
Berichten die geplaatst zijn door paardengek
-
-
Beste Geniuz,
Bullz-text is een ondertiteling addon voor je dreambox.
Ik gebruik zelf Drtic 1.9 ned. Dus heb geen ervaring met Bullz-text.
Met vriendelijke groet, paardengek
-
Beste rlx,
Tv1000 en andere zenders op sirius zijn overgegaan op videoguard, dus alleen te bewonderen met een abbo. Ook te lezen op de forum viaccess. <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" />
Sky Italia zijn sinds gister waarschijnlijk over gestapt op een andere nano reeks in seca2. Dus waarschijnlijk niet te bewonderen met de nieuwste humax firmware. Ook dat is te lezen op dit forum. <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" />
Met vriendelijke groeten, paardengek
-
Het antwoord op deze vraag staat in het zipbestand van scam.
Dus effe <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" /> <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" /> <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" /> <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" />
Succes, paardengek
-
Beste digifred,
Je zult vast wel signaal hebben op TV1000, maar je bedoelt zeker dat je tv1000 niet meer kan decoderen.
Dat kan kloppen, want ze zijn overgestapt naar videoguard.
Dus deze kanalen op sirius zijn alleen maar te zien met een abbo. Zie ook het forum viacess.
Vriendelijke groeten, paardengek
-
Deze zenders zijn nu alleen maar gecodeerd in videoguard, dus alleen maar met een abbo te bekijken. Zie ook het forum viacess. Dus helaas.
Met vriendelijke groet, paardengek
-
Ik heb deze image vandaag geflasht in mijn dreambox en ben erg tevreden over deze image. Ook met USB stick ( Kingston 128MB) werkt het goed.
Eergister heb ik Hydra 1.08 atlantis final geflashd, maar die had nogal wat vastlopers.
Dus ben zeer tevreden. Goed werk van rudream <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" /> <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" />
Met vriendelijke groet, Andries
-
Hallo Sjony,
Dit is volgens mij wel eerder gevraagd. Kijk hier eens:
http://www.sat4all.com/ubbthreads/showfl...;fpart=1#680506
Ik raad je dus aan om in beidde forums veel te lezen. <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" /> <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" /> <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" /> <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" /> Daarna kun je in combinatie met je eisen wel een keuze maken.
Met vriendelijke groet, paardengek
-
Resultaat is bekend.
Ik heb nu deze hydra image draaien en tot nu toe tot tevredenheid.
Conax, irdeto, viaccess en nagravision en seca 1 kan hij decoderen. Ben verder nog aan het testen.
Uiteraard met een biertje in de hand.
Met vriendelijke groet, paardengek
-
Het is de eerste keer van mij dat ik aan flashen ben, maar ik heb nu een oplossing gevonden. Natuurlijk niet goed gelezen op sjerom, hoe dreamup verloopt ( ja eerst proberen en dan lezen, tsja niet handig). Maar na het selecteren van de image deed dreamup helemaal niets, maar nu even op erase te hebben gedrukt en dan op flash en image selecteren ging dreamup toch uploaden.
Dus ik heb goede hoop.
Paardengek
-
Bedankt voor je snelle antwoord.
Ik heb dreamup beeindigd. De dreambox een paar minuten van de stroom gehaald. En ben weer opnieuw begonnen met het flashen, nu een erase image.
Hopend op een goed resultaat
Met vriendelijke groet, paardengek
-
Goedeavond allen,
Ik ben nu mijn db7000 aan het flashen.
Ik heb een nogal simpel vraagje:
Hoelang duurt het uploaden, flashen m.b.v. nulmodemkabel?
Ben ondertussen al bijna een uur bezig met dreamup; nog steeds de states uploading image. Ben hydra7000 atlantis 1.08final aan het flashen. Bij sjerom staat 10 min?? en dat voor 6MB ??
Met vriendelijke groet,
paardengek
-
patsie,
je hebt een seriele kabel (met twee rs232 aansluiting,)
maar ook een nulmodemkabel (met twee rs232 aansluiting).
In de nulmodemkabel zijn de ontvangstzijde en zendzijde gecrosst.(gekruist in het nederlands).
Paardengek
-
Beste Nasty,
Er is op internet ook deze link te vinden: <a href="mms://194.64.224.129/trabrennen" target="_blank">mms://194.64.224.129/trabrennen</a> <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" />
Werkt bij breedband verbinding en windows mediaplayer 9.
Dit zijn de beelden, die ook op BD4 uitgezonden worden.
<img src="/ubbthreads/images/graemlins/biggthumpup.gif" alt="" />
Succes, paardengek <img src="/ubbthreads/images/graemlins/loldev.gif" alt="" />
-
Op 12599V SR 6110 FEC 3/4 zijn paardenkoersen te zien vanuit Halmstad, Zweden
-
Beste Dengkao,
Ik denk dat je de zender Equida bedoelt. Deze zender zit op de Astra 19E en zendt uit in seca2, dus alleen met een abbo te zien.
Maar ook op de hotbird zitten een aantal equida zenders, deze zijn ook gecodeerd en wel in seca2, maar ook in viaccess.
Equida is de zender, die de franse drafsport uitzendt. Maar soms ook de springsport.
Als ik jouw configuratie bezie, dan ga ik ervan uit dat je alleen de astra 19E ontvangt en dan moet je dus een abbo hebben.
-
Beste Nasty,
Ik denk dat het met jouw configuratie, niet meer mogelijk is om de duitse koersen te kunnen zien. <img src="/ubbthreads/images/graemlins/biggthumpdown.gif" alt="" /> De Duitse drafsport gebruikt namelijk feeds op de astra 28.2E. Zie ook deze link
http://www.satelliweb.com/index.php?sect...ues&p=0 <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" />
Deze feeds wordt gebruikt om BD4( nagravision 2) van diverse koersmeetings beelden te voorzien. Ik probeer zoveel mogelijk van deze feeds te vinden, want ik ben dan ook drafsportliefhebber. Mocht ik een werkende feed vinden, dan zet ik deze in de feeds forum van sat4all.
Trouwens de nederlandse drafsport is te vinden op de sirius, 12590V SR 6110 en FEC 3/4, FTA. <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" />
Met groeten van paardengek
-
Het gaat ook prima met dreamtv 0.49 ook bij sjerom op de site te vinden. <img src="/ubbthreads/images/graemlins/biggthumpup.gif" alt="" />
Succes, paardengek
-
Kijk eens hierop: http://www.lyngsat.com/index.html <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" />
of hierop: http://www.satcodx9.com/ned/ <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" />
Kun je zien wat per sateliet is te ontvangen, wil je meerdere satelieten ontvangen dan is meerdere LNB's of een draaibaar systeem noodzakelijk. Kijk toch eens bij duwgati op de site. Muziekzenders zijn o.a. MTV VH1 VH1 classic etc. zijn te vinden op Atra 19,2E Hotbird 13E, etc.
succes, paardengek
-
Beste Jongsma,
Ik begrijp uit je beidde treaths, dat je graag multivision educatief wil decoderen. Dit gaat helaas niet met de maart patch, wel met de laatste patch 107p, maar dan zul je de irdeto 1 zenders van ned niet decoderen.
Dit is echter op te lossen met een cam ( bijv. MM of MR etc.) Dit echter wel met de orginele firmware ( 107ce of 108ce) van hyundai en up to date keys. <img src="/ubbthreads/images/graemlins/biggthumpup.gif" alt="" />
Succes, paardengek
-
Sirius 5E
12590V SR 6110
Paardenkoersen vanuit drafcentrum Wolvega
-
Beste Looking'
Lijkt mij het beste om eerst ad-aware ( lavasoft) te laten draaien en daarna de jv16 power tools gebruiken om zo de lijst van startprogramma's na te gaan ( eventueel controleren met aida32, om te kunnen controleren, dat je wel de programmas verwijdert dat je geinstalleerd hebt met messenger ( let op datum, tijd)).
Hierna de computer rebooten en start dan jv power tools weer op en ga dan na de register cleaner. draai dit progje en verwijder alleen de te veronderstellen veilig te verwijderen items, doe je dit niet, dan is er kans dat je windows opnieuw moet installeren!!! ( maak eerst even een backup van je register)
Sluit nu powertools en controleer nu in windowsverkenner de lijst Program Files dat daar verdachte bestanden tussen zit, verwijder deze eventueel.
Gebruik daarna eventueel nog het progje "The Cleaner".
Ik heb vanmorgen zelf ook spyware verwijderd ( Internet Optimizer MSBB ISTSVC etc.) Een foutje van mij, heb effe niet opgelet.
Succes, Paardengek
-
Duske,
Ik heb het nogmaals geprobeerd, met keyupdate en settings Joske draaibaar en walla het gaat goed.
Heb je het meerdere malen geprobeert? Tsja, waar de fout ligt weet ik niet. Zoveel kun je niet in dit programma instellen, ( keysupdate settingupdate en je IP dreambox). Probeer eens dit programma opnieuw te installeren.
-
Beste Duske'
Ik heb dreamupdate 1.31 getest en bij mij werkt het perfect.
Groeten, paardengek
-
Beste Steef,
Ook ik heb weleens problemen met mijn netwerk, maar het werkt wel, dit wordt bij mij veroorzaakt door de router(maar dit terzijde).
Zo heb ik bij mij de instellingen staan:
Instellingen computer 1: naam: P3 933MHz
Home
IP: 192.168.2.101 subnetmasker: 255.255.255.0
Gateway: 192.168.2.1 (router)
10.0.0.138 (ADSL modem)
DNS: 195.121.1.34 (Planet)
Instellingen computer 2: naam: P1 120MHz
Home
IP: 192.168.2.102 subnetmasker: 255.255.255.0
Gateway: 192.168.2.1 (router)
10.0.0.138 (ADSL modem)
DNS(pri): 195.121.1.34 (Planet)
DNS(sec): 195.121.1.66
Instellingen Dreambox: IP: 192.168.2.103 subnetmasker: 255.255.255.0
Gateway: 192.168.2.1 (router)
Nameserver: 10.0.0.138 (ADSL modem)
DHCP: disabled Netwerk: enabled
Instellingen router: LAN: IP: 192.168.2.1 subnetmasker: 255.255.255.0
Sweex breedband DHCP: disabled
WAN: static IP-adres
IP: 10.0.0.150 subnetmasker: 255.255.255.0
gateway: 10.0.0.138
Instellingen Speedtouch
ADSL modem: IP: 10.0.0.138
prive IP-adres: xxx.xxx.xxx.xxx volgens PPOA-1
Pr DNS: 195.121.1.34
Se DNS: 195.121.1.66
Wat belangrijk zijn de adressen van router( IP staat in de gebruiksaanwijzing, en ook hoe je de confrigatie kan wijzingen) Ook de IP adres van je modem ( bij mij een speedtouch van KPN) staat in je gebruiksaanwijzing van speedtouch. In mijn geval: IP router: 192.168.2.1 en IP modem:10.0.0.138. Ik hoop dat je hier iets aan hebt,
Succes, paardengek <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />
Wat is Bullz_text nou precies?
in Dreambox
Geplaatst:
In het zipbestandje van Bull-text is dit te lezen:
How to use bullz_text (Hopefully you know linux)
FTP to dreambox
bullz_text.cfg => /var/etc/bullz_text.cfg (ascii)
bullz_text.fnt => /var/etc/bullz_text.fnt (binary)
bullz_text => /var/bin (binary)
sub_title.so => /var/tuxbox/plugins (binary)
sub_title.cfg => /var/tuxbox/plugins (ascii)
Before you make the ftp transfer you can edit
the configuration file at your wish. Please
use an editor which can handle Unix text or
execute DOS2UNIX after the edit
(http://www.lesve.org/zip/UDDU.ZIP
from bastet.com)
The colors of the subtitle is configurable. Either
you write the raw value or one of the preconfigured.
It is also possible to edit the font file, bullz_text.fnt.
Normally this is not the case but if you want to do
this you have the utility Softy.
(http://www.lesve.org/zip/sfty107b.zip
[No support today])
In case you edit the file. Do not change anything else
than the pixels (No size or order)
Next you open a telnet connection to your dreambox and do the following
> cd /var/bin
> chmod 511 bullz_text # or chmod 733 for less security
> ./bullz_text
>
If you for some reason want to suspend the text output for some time
you can do that by creating the file /tmp/suspend_bullz_text
The size is unimportant. Through telnet you do this
with the command 'touch /tmp/suspend_bullz_text'
To deactivate the suspend just delete the file and the text should be there again.
telnet command for delete: 'rm /tmp/suspend_bullz_text'
It is also possible to suspend through the config file (See bullz_text.cfg)
In case you will start it at boot, just edit the file /var/etc/init.
Add the following line at the end of that file (but before 'exit' if that exist)
Important: Dont forget any character
if [ -x /var/bin/bullz_text ]; then /var/bin/bullz_text; fi
bullz_text has also some command line options (which overide config file)
-h A little help
-b Let the program run as background (default from version 0.16)
-f Let the program run as forground
-v Change output from console to stderr (your terminal)
Will only work in forground mode
-d <level> Change the debug level. (<level> can be 0 - 3)
-l <lang) Sets the country code (dan,fin,nor,swe,ita,eng)
More features in the 'bullz_text.cfg' file
bullz_text can reread the file /var/etc/bullz_text.cfg and change
some parameters during run time. To change parameters just edit the
file and when you have finished editing just run the script
'/var/bin/cfg_bullz_text'.
The only parameters which are read and changed during this are:
language:
language2:
colorindex:
delta_y:
GUI PLUGIN:
-----------
The GUI plugin can be started from the plugin menu.
1st Language: Change to the prefered language of your choice
2nd Language: Change to the language you choose if your prefered dont exist
Color: Setting the foreground and background color of the characters
START: Press green button to start bullz_text
STOP: Press red button to abport bullz_text
CHANGE: Press blue button when you want to update your configuration
ABOUT: Press yellow button you will see version number and if you
are connected to internet even the latest released version of bullz_text.
Some status information about the running bullz_text
Important
=========
To abort the program just type /var/bin/kill_bullz_text in a telnet window
and a clean abort is executing. Do NOT use kill (or killall).
The program is using the Console for Notice, Warnings and Errors.
You can read the Console through a nullmodemcable to your PC. (just 115200 bps 8N1)
If you don't have this you can change in the configuration file or use command
line option (-v). If you run in background it will if force the messages to
console all the time.
Known limitations and bugs
It will only recognice the 'dan','eng','fin','nor','swe' and 'ita' language
For others language will the character probably be wrong
The size of the subtitle is not changable.
The home page for the subtitle program is:
http://www.lesve.org/main.php?folder=dreambox&db=3
If you find unpleasent bugs please tell me at
the following address bullz_text@lesve.org
Change Log:
2004.09.06 0.23 Status in the GUI configuration (About key)
2004.08.31 0.22 Part II of the GUI configuration
2004.08.27 0.21 New Language Italien and first GUI try
2004.08.22 0.20 Added the suspend possibilty
2004.08.04 0.19 Compiled with gcc version 'gcc-3.3.4'
2004.07.30 0.18 Better solution for Hallmark(1W) subtitle
2004.07.24 0.17 Possible to reread bullz_text.cfg
2004.07.12 0.16 Withdraw
2004.07.12 0.15 Options: move lines up/down
2004.07.04 0.14 Added a font color (Outlined white).
2004.06.29 0.13 Buildin command to run in background
2004.06.26 0.12 Will work on Hydra Ulysses 1.08
2004.06.19 0.11 Can now handle a secondary language
2004.06.17 0.10 Change code at channel change
2004.06.14 0.09 Read http port from enigma config
2004.06.12 0.08 Add command line options
2004.06.11 0.07 The colours are configurable
2004.06.09 0.06 An option to have the font as a seperate file
2004.06.06 0.05 Change the code for error correction (Hamming code)
2004.06.02 0.04 Add the trace possibility in the configuration
2004.05.31 0.03 Language configuration
2004.05.31 0.02 Complete font. No nordic character yet
2004.05.29 0.01 Very first try
Je kunt je informatie dus hier vandaan halen:
http://www.lesve.org/main.php?folder=dreambox&db=3
Ik denk, dat je net als bij drtic, je zogenaamde srt files moet gebruiken. Deze srt files zijn te downloaden bij:
http://www.nlondertitels.com/
Maar dit weet ik niet zeker.
Succes, paardengek