Boot Probleem met nieuwe ontvanger

[-= [ Appien ] =-]

iemand enig idee? Ik weet het niet meer. Diverse image's geprobeerd, ook de lege flash image er in gehad, maar geen effect. Hij heeft 3x goed geboot.

 

 

Citaat:

Dreambox DM7000

loaded at: 00500000 006161F8

relocated to: 00400000 005161F8

board data at: 00513128 00513168

relocated to: 00404C14 00404C54

zimage at: 00405150 00512A99

avail ram: 00517000 02000000

 

Linux/PPC load: console=ttyS0,115200 root=/dev/mtdblock5 rootfstype=squashfs ro

Uncompressing Linux...done.

Now booting the kernel

Linux version 2.4.20 (ghost@client) (gcc version 3.2.3) #1 Di Feb 3 19:37:57 CET

2004

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0,115200 root=/dev/mtdblock5 rootfstype=squashf

s ro

Console: colour dummy device 80x25

Calibrating delay loop... 251.49 BogoMIPS

Memory: 29760k available (1920k kernel code, 600k data, 92k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 81

POSIX conformance testing by UNIFIX

PCI: Probing PCI hardware

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

OCP uart ver 1.6.2 init complete

Starting kswapd

Journalled Block Device driver loaded

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.1. © 2001 Red Hat, Inc., designed by Axis Communications AB.

i2c-core.o: i2c core module

i2c-dev.o: i2c /dev entries driver module

i2c-core.o: driver i2c-dev dummy driver registered.

i2c-proc.o version 2.6.1 (20010825)

pty: 256 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en

abled

ttyS00 at 0xe0040000 (irq = 20) is a 16550A

ttyS01 at 0xe0000000 (irq = 21) is a 16550A

ttyS02 at 0xe00e0000 (irq = 31) is a 16550A

Uniform Multi-Platform E-IDE driver Revision: 6.31

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

IBM IDE ocp driver version 2.2

ide_redwood: waiting for drive ready......Drive spun up

loop: loaded (max 8 devices)

smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com)

eth0: SMC91C11xFD(r:1) at 0xc308e300 IRQ:28

MEM:8192b NOWAIT:0 ADDR 00:09:34:ba:da:dd

SCSI subsystem driver Revision: 1.00

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

dreambox: flash mapping: 800000 at

disable flash VPP

Creating 6 MTD partitions on "DreamBOX rev3+":

0x00000000-0x00600000 : "DreamBOX cramfs"

0x00600000-0x007c0000 : "DreamBOX jffs2"

0x007c0000-0x00800000 : "DreamBOX OpenBIOS"

0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"

0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"

0x00120000-0x00600000 : "DreamBOX SquashedFS"

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-ohci.c: USB OHCI at membase 0xc3893000, IRQ 18

usb-ohci.c: usb-ocp, builtin

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

usb.c: registered new driver hiddev

usb.c: registered new driver hid

hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>

hid-core.c: USB HID support drivers

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

USB Mass Storage support registered.

mice: PS/2 mouse device common for all mice

IBM IIC driver v2.0

ibm-iic: using compatibility value for OPB freq, fix your board spec

i2c-dev.o: Registered 'IBM IIC' as minor 0

i2c-core.o: adapter IBM IIC registered as adapter 0.

ibm-iic0: using standard (100 kHz) mode

ibm-iic: using compatibility value for OPB freq, fix your board specific setup

i2c-dev.o: Registered 'IBM IIC' as minor 1

i2c-core.o: adapter IBM IIC registered as adapter 1.

ibm-iic1: using standard (100 kHz) mode

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 204

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 92k init

Using /lib/modules/2.4.20/misc/fb.o

fb: loaded

dummycon (0)<3>fbcon_setup: No support for fontwidth 8

fbcon_setup: type 0 (aux 0, depth 8) not supported

Console: switching to colour frame buffer device 90x36

pfb: fb0: Pallas frame buffer device

Using /lib/modules/2.4.20/misc/dream.o

i2c-core.o: driver DreamBOX frontprocessor registered.

Data machine check in kernel mode.

Oops: machine check, sig: 7

NIP: C01793C8 XER: 20000000 LR: C0179A20 SP: C1E0DD80 REGS: c1e0dcd0 TRAP: 0200

Not tainted

MSR: 00009030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11

TASK = c1e0c000[21] 'insmod' Last syscall: 128

last math 00000000 last altivec 00000000

PLB0: bear= 0x00000000 acr= 0x00000000 besr= 0x00000000

PLB0 to OPB: bear= 0x40030010 besr0= 0x03c00000 besr1= 0x00000000

 

GPR00: 00000001 C1E0DD80 C1E0C000 C03EFE40 C1E0DDE8 00000001 000011B5 C022D973

GPR08: 00000000 00000001 FFFF0010 0000000C C0250000 10067424 00000000 00000000

GPR16: 00000000 00000000 00000000 00000000 00009032 01E0DF40 C1E0DEA8 30057D90

GPR24: C1C44000 C03FFB60 C03EFE40 C03EFE40 00000001 C3899000 C3899000 C1E0DDE8

Call backtrace:

C0012CF4 C0179A20 C01760E4 C3AC299C C01751E8 C3AC2FC0 C3AC2070

C3AC2164 C0013EC8 C000279C 1001BF3C 1001CFF0 10003EE4 10003AE8

0FEF1B50 00000000

SIGBUS

Using /lib/modules/2.4.20/misc/dvb_net.o

DVB-NET: $Id: dvb_net.c,v 1.4 2003/11/29 16:20:41 ghost Exp $

insmod: init_module: dvb_net: No such file or directory

.: 6: Can't open /proc/bus/dbox.sh

/dev/dbox/fpkeys0: No such file or directory

FPKEYS_IOCTL_READ_KEYS: Bad file descriptor

 

[Gast]

Hoi,

 

Zo te zien krijgt een machine check na dream.o, i2c-core.o

Een machine check op een PowerPC processor is meestal het gevolg van een exceptie(vaak Non-maskable interrupt) welke de processor niet kan afhandelen om vervolgens met z'n normale programma verder te kunnen....

Tijdens het afhandelen van deze exceptie krijg je nog een dump van de registers in de processor en dan zal het zaakje wel opnieuw gaan booten.

 

Misschien hardware probleem ?

 

gr.

jpu

[Ronaldd]

Als dit een nieuwe DB is dan zou ik hem terug geven aan je dealer. De kernel crashed tijdens laden van dream.o, dat mag nooit gebeuren als je een image gebruikt met org. dream.o en org. kernel.

 

Ronald