newcamd v14

[bbbb]

Er is een niewe newcamd uit

 

Official release newcamd v5.14

 

We have noticed that some of the newcamd distribution files violating our

rules for newcamd distribution have been removed from certain upload

centers. Therefore we make a full release this time.

 

However, we also notice, there are still many files around that do NOT comply

to the distribution terms set below, particularly complete images with all

keys inside. We again ask uploaders to remove such files and we also ask

admins to not allow such files on their upload centers.

 

Further action might be taken in the future, if our rules about newcamd

distribution are continously violated.

 

-------------------------------------------------------------------------------

 

It is our firm believe that access to Free-TV is made way to easy for

people at the moment and we are seriously considering disallowing the

distribution of future newcamd releases inside flash images. We have been

following a public policy up until now, because we wanted to provide a free

alternative to the never ending greed of the commerical pirates. But we do

believe however, that we can ask everyone wanting to use our software, to get

out of their TV armchairs and pause the growing of their asses (to quote the

writer of a certain FAQ) long enough to learn how to upload a couple of files

to their boxes via ftp, read the supplied documentation and edit a couple of

keyfiles. Everybody can learn how to do that easily, and we mean EVERYBODY.

We feel that anyone claiming the contrary, is just too lazy to even try.

To sum up, we believe all the emu images and full automatic internet key

downloads at the push of a button are hurting the Free-TV community more then it

serves it by forcing Pay-TV providers to implement stronger countermeasures and

we would ask all image makers out there to rethink their position.

 

-------------------------------------------------------------------------------

 

And since we are discussing politics already, some recent news bulletins on

several news services indicated the European Union thinking about forcing Pay-

TV providers to offer their services beyond national borders to anyone who wants

a subscription. We strongly support such a move and we pledge that the emu and

cardsharing facilities in newcamd would be discontinued if Pay-TV providers

would start to offer their services internationally under the same conditions

they offer it to national residents. In particular:

 

1. same choice and contents of all channel packages (no stripped-down

international subscriptions like Digiturk Euro).

2. same prices as for national customers

 

It was never the intention of the newcamd Team that people would use it to steal

the services of their national Pay-TV provider (or any other provider they could

officially subscribe to). If and when everyone would be able to officially

subscribe to any Pay-TV package he wants to, under the same conditions as

everyone else and regardless of where he lives, we would feel newcamd becoming

kind of obsolete. The only reason why we make newcamd support emu and card

sharing is to overcome this discrimination by Pay-TV providers to offer official

subscriptions to national residents only.

 

-------------------------------------------------------------------------------

 

Welcome to newcamd V5

 

This package is freeware. Distribution and usage is allowed only if you

agree and comply to the following rules:

 

1. For standalone (outside of flash images) distribution, you are NOT allowed

to make any changes to the original ZIP archive whatsoever. Distributions of

newcamd must not include any keys or Nagra ROMs.

2. Distribution of newcamd inside flash images is allowed, if no keys or

Nagra ROMs are included in the same flash image. Full documentation must be

provided in the flash image. Files keylist, rsakeylist, tpscrypt, ppua,

readme.txt and nagraAU.txt must be present in /var/scce (/var_init/scce on

Dreambox), files newcamd.conf, cardserv.cfg and betad.cfg must be present

in directory /var/tuxbox/config (/var_init/tuxbox/config on Dreambox). Files

in scce must be copied from the original Zip archive, they may not be changed.

Options in config files may be changed, but all the comments must be left

unchanged.

3. Distribution of patched newcamd, cardserver, betad and/or dcd binaries is

strictly prohibited.

 

Dieses Paket ist Freeware. Weiterverbreitung ist nur unter Einhaltung der

folgenden Regeln gestattet:

 

1. Das Original ZIP Archiv darf NICHT veraendert werden. Insbesondere duerfen

keine Keys oder Nagra ROMs enthalten sein.

2. Die Weiterverbreitung in Flash-Images ist nur erlaubt, wenn keine Keys oder

Nagra ROMs im Image enthalten sind. Die komplette Dokumentation muss im Image

vorhanden sein. Die Dateien keylist, rsakeylist, tpscrypt, ppua, readme.txt

und nagraAU.txt muessen in unveraenderter Form ins Verzeichnis /var/scce im

Image kopiert werden (/var_init/scce in Dreambox Images), die Dateien

newcamd.conf, cardserv.cfg und betad.cfg muessen ins Verzeichnis

/var/tuxbox/config (bzw. /var_init/tuxbox/config bei Dreambox Images) kopiert

werden. Konfigurationsoptionen duerfen angepasst werden, aber die Kommentare

muessen unveraendert bleiben.

3. Die Weitergabe von gepatchten newcamd, cardserver, betad und/oder dcd

Binaries ist ausdruecklich untersagt.

 

History:

 

newcamd v5.14

cardserv.cfg: description for BOXKEY option added, this is needed for nagra1

cards and was unfortunately forgotten to add in 5.13 release

http://streamboard.host-boxcracker.de/wbb2/thread.php?postid=179144 "fixes":

- cardserver/betad: replaced calls to tcflush with some workaround code

(Apparently doing a proper mklibs run seems to be too much to ask from some

"image makers", this was no cardserver fault, but an image fault. Anyway, it

should work now even in those images.) (fixes horsti58's problem)

- cardserv.cfg: mark CARD_DETECT_INVERT, IGNORE_CARD_DETECT_SWITCH as usable

options for betad (they have been since 5.10, but it was forgotten to add them

to the list of options, betad recognizes) (fixes Suedschwede's and macb's

problem)

 

newcamd v5.13

cardserver: fix handling of single control word Viaccess ECMs

newcamd/cardserver/cardspider: add support for Nagra1 original smartcards

cardserver: better overload handling (hopefully)

cardserver: new priority scheme - users with lower user id will be

serviced first

cardserver/Dreambox: support Phoenix cardreaders on USB->RS232 adapters

using devices /dev/usb/tts/0,1,2,3,... this feature depends on a driver

for your particular USB->RS232 adapter being insmod into the kernel of

your image, your particular USB->RS232 driver supporting RS232

handshaking signal generation and on the particular card used.

Basically this feature should be considered unstable and for advanced

users only

 

newcamd v5.12

Cabo AU fix

 

newcamd v5.11

0064 - thx to all the nice people, who published the necessary info

 

newcamd v5.10

newcamd/betad: betad now detects card insertion/removal, reverse login to

newcamd added

all the rest: small fixes, might be a good idea to replace all binaries

 

newcamd v5.09

newcamd: S2 5102

cardserver: new connection type option "spider", this acts like "wan", but

allows connections to cardspider ("wan" doesn't)

 

newcamd v5.08

newcamd: fix nano51 in Seca2 emu

cardserver (seca): SPECIAL_FEATURES are now called DISABLE_PIN

 

newcamd v5.07

fix serious bug in cardspider

 

newcamd v5.06

from now on all i386 binaries will be linked against glibc 2.2

newcamd: from now on ppc version will be linked against libcrypto.so.0.9.7

add option OSD_WEB_LOGIN in newcamd.conf for recent Enigma versions

where "Use http authentication" is actived in the Expert Setup menu

cardserver/betad: remove glibc dependency cfsetospeed

dcd: removed

cardspider: reduce data traffic

add ECM counter for new ECMs in debug output

 

 

newcamd v5.05

newcamd: 9x table for 0070-0073, S2 nano 0f and 51 support

cardserver: add some round-robin card rotation for answering ECMs, if

cardserver serves more than 1 card

cardspider: allow multiple cardspider instances to run from different cfg files

cardspider: add lan/wan classification to all cardspider connections

(cardserver + newcamd)

your cardspider.cfg has to be changed, either lan or wan must be added to

all USER and CWS statements, see cardspider/cardspider.cfg for details

 

 

newcamd v5.04

4 priority levels in /var/scce/priority

 

newcamd v5.03

fixes

 

newcamd v5.02

cardspider: internal protocol improvements, update all nodes

 

newcamd v5.01

fixed DNS lookup timing bug in cardspider

 

newcamd V5.00

added cardspider, see cardspider/cardspider.cfg

cardserver: allow multiple users to EMM a card

 

 

Installation:

 

Copy newcamd.conf to /var/tuxbox/config (dbox2/Dreambox) or /etc (i386).

Check the config file and alter it for your needs.

Copy keylist, rsakeylist, ppua, tpscrypt, priority, mappings, nagra*.bin to

/var/scce

Enter keys into the keyfiles.

Install control word driver, avia_gt_proc.o (dbox2) or DVB-S driver with

changed root file (i386). Dreambox has control word driver included in

dream.o from Release 1.07. 1.07.2 uses api2 ca0 device in /dev/ca0, dream.o

from 1.07.3 and up use api3 ca0 device in /dev/dvb/card0/ca0.

dbox2 can also use ca1 device, no avia_gt_proc.o is needed in this case.

 

With CW_OUTPUT_MODE = 16 newcamd will write the descrambled control words to

/proc/bus/gtx (dbox2), 16 bytes with each write, first 8 byte odd control

word, then 8 byte even control word. With CW_OUTPUT_MODE = 4096 newcamd writes

4096 bytes to /proc/bus/gtx, just like the very first camds did.

On I386 newcamd or BOX_TYPE = DREAMBOX this parameter is ignored, because

control words are written to the ca0 device.

 

dbox2 users should deactivate hardware section filtering on API3 drivers, for

some reason, which illudes me, the demuxer keeps crashing from time to time

when using newcamd.

 

Changes to Zapit/Enigma:

 

No changes are necessary in recent Zapit or Enigma sources. Just use newcamd

instead of camd2 or dccamd. Make sure to set PMT_UPDATE_WATCH correctly for the

zapper, you are using.

The old newcamd interface also still works for backward compatibility and

for older Zapit and Enigma versions, that don't support the current ca pmt

interface yet. The old interface is described below (see zapit-Anpassung).

 

Killing newcamd

 

This seems to be a big problem, from what I can read in certain Internet

forums (Posts like "newcamd never saves any AU keys", well if you kill it

with the -9 option, you're not giving newcamd a chance to save anything).

So, this is, how it's done right: newcamd, during startup, always creates a

file /tmp/newcamd.pid. Kill that pid (pid = process id) and newcamd will

shut down orderly. For example: kill `cat /tmp/newcamd.pid`

 

/tmp/pmt.tmp and Polsat acceleration (optional)

(NO EFFECT for PMT_UPDATE_WATCH = no and new interface)

 

Let your zapper create a file called /tmp/pmt.tmp, newcamd can read this

and don't need to demux the channel's pmt again, which is faster.

For example in zapit/src/zapsi/pmt.cpp in function parse_pmt:

 

FILE* pmtFile;

 

then after the PMT was read from the demuxer:

 

section_length = ((buffer[1] & 0x0F) << 8) + buffer[2] + 3;

 

if ((pmtFile = fopen("/tmp/pmt.tmp", "wb")))

{

if (fwrite(buffer, sizeof(unsigned char), section_length, pmtFile) != section_length)

{

fclose(pmtFile);

unlink("/tmp/pmt.tmp");

}

else

{

fclose(pmtFile);

}

}

 

 

zapit-Anpassung (altes Interface):

 

Folgende Funktionen muessen in zapit.cpp hinzugefuegt werden und an

entsprechender Stelle bei jedem Kanalwechsel aufgerufen werden. Fuer Polsat

empfiehlt es sich ausserdem, in zapost/dmx.cpp den Timeout fuer die PMT zu

verlaengern, ansonsten gibt es eine Menge Probleme mit Kanal nicht verfuegbar.

Fuer die start_camd() Routine ist erforderlich, nachzusehen, ob zapit die PMT

des aktuellen Kanals ueberwacht (pmt_set_update_filter). Diese Funktion wurde

mit zapit Version 1.327 eingefuehrt und war bis 1.330 standardmaessig aktiv,

seitdem ist sie zuschaltbar. newcamd hat ebenfalls so eine PMT Ueberwachung,

um den Wechsel von unverschluesselt zu verschluesselt rechtzeitig zu erkennen,

diese Ueberwachung muss aber abgeschaltet bleiben, wenn sie schon durch zapit

durchgefuehrt wird. Die Umschaltung wird ab sofort durch PMT_UPDATE_WATCH in

newcamd.conf vorgenommen. Die C++ Klasse (CCam) fuer das Betacrypt CAM muss

komplett deaktiviert werden.

 

void stop_camd()

{

struct sockaddr_un servaddr;

int camdSocket;

unsigned char camdBuffer[6];

 

servaddr.sun_family = AF_UNIX;

strcpy(servaddr.sun_path, "/tmp/camd.socket");

if ((camdSocket = socket(AF_UNIX, SOCK_STREAM, 0)) < 0)

{

perror("[camdConnect] socket");

return;

}

 

if (connect(camdSocket, (struct sockaddr*) &servaddr, sizeof(servaddr)) < 0)

{

perror("[camdConnect] connect");

close(camdSocket);

return;

}

 

memset (camdBuffer+1, 0, 5);

camdBuffer[0] = 0xff;

 

if (write(camdSocket, camdBuffer, 6) < 0)

{

perror("[camdConnect] write");

}

 

if (read(camdSocket, camdBuffer, 2) < 0)

{

perror("[camdConnect] read reply");

}

 

close(camdSocket);

}

 

void start_camd()

{

struct sockaddr_un servaddr;

int camdSocket;

unsigned char camdBuffer[6];

unsigned short pid;

 

servaddr.sun_family = AF_UNIX;

strcpy(servaddr.sun_path, "/tmp/camd.socket");

if ((camdSocket = socket(AF_UNIX, SOCK_STREAM, 0)) < 0)

{

perror("[camdConnect] socket");

return;

}

 

if (connect(camdSocket, (struct sockaddr*) &servaddr, sizeof(servaddr)) < 0)

{

perror("[camdConnect] connect");

close(camdSocket);

return;

}

 

pid = channel->getAudioPid();

 

camdBuffer[4] = (pid >> 8) & 0x1f;

camdBuffer[5] = pid & 0xff;

pid = channel->getPmtPid();

camdBuffer[0] = (pid >> 8) & 0x1f;

camdBuffer[1] = pid & 0xff;

pid = channel->getServiceId();

camdBuffer[2] = pid >> 8;

camdBuffer[3] = pid & 0xff;

 

if (write(camdSocket, camdBuffer, 6) < 0)

{

perror("[camdConnect] write");

}

 

if (read(camdSocket, camdBuffer, 2) < 0)

{

perror("[camdConnect] read reply");

}

 

close(camdSocket);

}

 

 

vdr-Anpassung:

 

Mitgeliefert wird ein Patch fuer szap aus dem linuxtv-dvb-1.0.1.tar.gz

Treiberpaket. Die darin enthaltenen camd_stop() und camd_start() Routinen

koennen auch in den vdr uebernommen werden. Saemtliche Funktionalitaet, die

auf das ca-Device zugreift, ist im vdr zu deaktivieren, newcamd benoetigt

exklusiven Zugriff auf das ca-Device. Anstatt der PMT Pid kann auch 0

uebergeben werden, da mein vdr Beta-Tester meinte, die PMT Pid sei an der

Stelle im vdr Code, an dem man den newcamd nach dem Zappen starten moechte,

etwas schwierig zu ermitteln. In diesem Fall versucht newcamd die PMT Pid aus

der Transponder PAT anhand der uebergebenen Service Id zu ermitteln. Nicht

vergessen, einen Treiber mit gepatchtem Root File zu verwenden.

 

mehrere DVB-S Karten:

 

Ist mehr als eine DVB-S Karte im Rechner eingebaut, muss fuer jede Karte ein

eigener newcamd gestartet werden. Fuer diesen Fall kann in der Kommandozeile

Pfad+Name des newcamd.conf Files und die Adapternummer angegeben werden (0-3).

"newcamd /etc/newcamdAdapter1.conf 1" startet zum Beispiel einen newcamd fuer

die zweite Karte im Rechner und nutzt /etc/newcamdAdapter1.conf als Konfigfile.

Angesprochen werden die einzelnen newcamd dann ueber /tmp/camd.socket0 bis

/tmp/camd.socket3 (siehe szap Patch).

 

Faq:

 

Question: On Dreambox cardserver never (or seldom) detects inserted cards.

I have to reboot box with cards inserted for cardserver to detect anything.

Answer: Early Dreambox mainboards have a design flaw, resistances R5003 and

R5007 have been fitted with 10 kOhm resistances instead of the correct 2.2 kOhm

resistances. You need to replace them both with the correct ones. You find them

just behind the card readers.

 

Question: Why is there no (or: Will there ever be) emu for Neotioncrypt porn

channels?

Answer: No. Those porn channels can be subscribed from every country, so bugger

off <img src="/ubbthreads/images/graemlins/smile.gif" alt="" /> (maybe first take a look at newcamd policies at the top of this file)

 

Frage: Gehen mit cardserver die neuen Premiere oder Dreamcrypt Karten?

Antwort: Nein. newcamd enthaelt auch weiterhin keinerlei Funktionen, die das

Entschluesseln von Premiere ohne gueltiges Abo ermoeglichen, also auch kein

Control Word Sharing ueber Internet fuer Premiere. Gleiches gilt auch fuer

Dreamcrypt. In der dbox2 werden die neuen Premiere Karten selbstverstaendlich

im normalen CAM unterstuetzt.

 

Frage: Wie kann ich dann mit der Dreambox oder einer DVB-S Karte und vdr mein

Premiere Abo nutzen?

Antwort: Es gibt eine spezielle betad Version, die die neuen Premiere Karten

unterstuetzt. Diese kommuniziert im Gegensatz zu cardserver nicht ueber

TCP/IP. Also auch hier kein Control Word Sharing ueber Internet.

 

Frage: Welche Kartentypen werden von betad unterstuetzt?

Antwort: Getestet wurde betad mit S01 und S02 Karten. Prinzipiell sollten alle

01er und 02er Typen funktionieren, also auch K01, K02, P01, P02, A01, A02.

betad ist nicht geeignet fuer die 03er Kartentypen S03, K03, P03, A03.

 

Frage: Kann ich mit Hilfe von betad und Multicam auch eine S01 (K01, P01, A01)

Karte an der dbox2 benutzen?

Antwort: Ja.

 

Frage: Ich habe zwei Premiere Abos mit unterschiedlichen Paketen. Kann ich diese

kombinieren?

Antwort: Ja. Mehrere betad auf unterschiedlichen seriellen Ports starten und

alle Server in newcamd.conf anmelden (uds 0, uds 1, ...). dbox2: Erste Karte

in dbox CAM einlegen, zweite Karte in Multicam mit betad.

 

Frage: Ich habe ein Premiere Abo und meiner Bekannter hat ebenfalls eins, beide

mit unterschiedlichen Paketen. Kann ich diese kombinieren?

Antwort: Nein, siehe "Gehen mit cardserver die neuen Premiere Karten?".

 

Frage: Wenn ich ein Phoenix an die serielle Schnittstelle anschliesse, bootet

die dbox2 nicht mehr, im Display sind die Inforamtionen vom Debug Modus und

volle Balkenzahl zu sehen.

Antwort: Das ist eine Debug Funktion des Beta Research Bootloaders. Wenn beim

Booten bestimmte Pegel an der seriellen Schnittstelle anliegen, wird der

Bootvorgang angehalten. Mir ist keine Abhilfe bekannt, ich empfehle daher den

Standby-Modus von Neutrino oder ein MultiCam, falls noch nicht vorhanden.

[Gast]

Ik heb hem via het control panal van Hydra final geinstalleerd en loopt perfect, volgens mij gaat het zappen nog iets sneller een zijn de freeze naar het zappen korter.

 

Perfect werk geleverd

[bbbb]

Is de beste emu die er is wel moelijk om intestelllen

[Gast]

Citaat:

Is de beste emu die er is wel moelijk om intestelllen

Hoezo moeilijk in te stellen???

[bbbb]

normale gebruik niet .Maar cardserver etc wel

[Gast]

Citaat:

normale gebruik niet .Maar cardserver etc wel

Als je weet hoe je het moet instellen valt dat reuze mee, maar het is inderdaad wel uitzoeken.....als je tips nodig hebt pm me maar

[Gast]

Citaat:

Ik heb hem via het control panal van Hydra final geinstalleerd en loopt perfect, volgens mij gaat het zappen nog iets sneller een zijn de freeze naar het zappen korter.

Perfect werk geleverd

heb hem ook net via de control panal van Hydra final geinstalleerd en loopt perfect, alleen doet de conax niets <img src="/ubbthreads/images/graemlins/confused.gif" alt="" /> jammer

[barchetta]

Als je die irritante berichtjes niet meer in beeld wilt zien:

 

ga naar /var/tuxbox/config en wijzig in newcamd.conf de regel OSD=enigma in OSD=none

[Gast]

Citaat:

Als je die irritante berichtjes niet meer in beeld wilt zien:

ga naar /var/tuxbox/config en wijzig in newcamd.conf de regel OSD=enigma in OSD=none

oke bedankt <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" />

[4-stimpy]

Ik had gister die 5.13 er in gezet met cp van hydra, toen kreef ik de fout can't decode. En geen beeld.

 

Vandaag de 5.14 er in gezet met cp, maar nog steeds zwart, en de zelfde foutmelding.

 

Moet ik misschien eerst even de newcamd verwijderen?

En daarna opnieuw via cp de 5.14 er in zetten?

 

( ik kan op dit moment niets proberen, vandaar de vraag )

 

moet ik de newcamd.pid in temp\ ook verwijderen?

[Boelo]

Misschien een domme vraag:

Maar hoe doe je dat,via de control panal van Hydra final .

 

Igepakt of uitpakken ?

Waar zet je hem heen?

[Gast]

heb hem ook net via de control panal van Hydra final geinstalleerd en loopt perfect, alleen doet de conax niets <img src="/ubbthreads/images/graemlins/confused.gif" alt="" /> jammer

 

 

Logish dat conax het niet doet zijn geen keys van <img src="/ubbthreads/images/graemlins/loep.gif" alt="" />

[Gast]

Citaat:

Misschien een domme vraag:
Maar hoe doe je dat,via de control panal van Hydra final .

Igepakt of uitpakken ?
Waar zet je hem heen?

Als je het via de control panal van Hydra doet hoef je zelf niks in de dreambox te zetten, hij wordt dan vanzelf gedownload en geinstalleerd.

Ga als volgd te werk:

1) Druk op de Blauwe knop.
2) Ga naar de The_Hydra_Setup en klik op Download latest control panel.
3) Reboot je Dreambox.
4) Druk weer op de Blauwe knop en klik op Download softcams.
5) Download Newcamd (v5.14).
klik 2x op de LAME knop.
6) Klik op Softcam Settings en daarna op Sm@rtCAM v1.0
7) Zet de Defealt softCAM op NewvCamd (v5.14)

Als je deze handelingen volgd moet het goed gaan.

Suc6 <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" />

[barchetta]

Citaat:

Ik had gister die 5.13 er in gezet met cp van hydra, toen kreef ik de fout can't decode. En geen beeld.

Vandaag de 5.14 er in gezet met cp, maar nog steeds zwart, en de zelfde foutmelding.

Ik had exact het zelfde! Zelfs na een reboot.

Dus wilde ik een berichtje hier schrijven dat het wéér niet werkte.

En toen ...

Opeens ...

was er licht!

Dus rebooten, tijdje wachten, etc. Beetje klooien dus <img src="/ubbthreads/images/graemlins/wink.gif" alt="" />

[4-stimpy]

Blauwe knop, onderste optie kiezen.

 

Dan heb je de nieuwste lijst.

 

Zorg dat je newcamd niet hebt lopen. Dan blauwe knop, tweede regel en dan newcamd 5.14 kiezen.

 

Daarna is het verstandig om de box even te resetten.

Dan moet je de newcamd kunnen selecteren. Dan zou alles moeten werken.

 

 

 

 

op deze manier haal je ook de nieuwste keys binnen.

 

Oke zo snel gaat het.

mickeymouse, je bent me net voor. En net even beter uitgelegd. Alleen de reboot, bij 3 doe ik nooit.

en de reboot die ik noem doe ik eigenlijk ook nooit, alleen als er iets niet werkt. Maar dan werkt het na die tijd ook meestal niet.