abbo in db???

[Gast]

Heb nu de gemini 1.05 in de db.

Maar geen beeld (canal blauw en rood).

[paardengek]

Ttaacoo,

 

Ik neem aan dat je een abbo hebt op canal rood/blauw ?

Je hebt de smartkaart er wel met de chip naar beneden in het slot ?

Via de zoekfunctie kun je het één en ander vinden over emu instellen en een canal digital ( canal+ ) abbonement.

Het kan via een aantal emu's, zoals Radegast, Newcamd, camd3, camx. Radegast en newcamd moet je instellen. Dat kan, afhankelijk welke image, via de extra setup emu in het menu ab dreambox. Of je moet via een editor ( bijv ultra-edit) aanpassen. Het gaat om /var/tuxbox/config/newcamd.conf voor newcamd. Voor radegast gaat het om /var/etc/radegast.cfg

In deze bestanden moet je aanzetten: de kaartlezer; de auto update functie etcetera.

 

Met vriendelijke groeten, paardengek

[Gast]

Momenteel draai ik de newcamd en krijg toch geen canal rood of blauw...(seca 2 kaart)

 

Kan hier nergens over terug vinden.

Maar ik vraag me wel af als er werkelijk een IMAGE is die de EMULATOR en CANAL BLAUW of ROOD..samen kunnen werken.

Natuurlijk kan ik er nog altijd een aston module kopen en klaar is kees.

Maar had toch even gedacht dat er een IMAGE ervoor bestond.

Bijvoorbeeld de humax een abbo(wel irdeto 2 kaart)en de emu en alles gaat open.Maar misschien weet de makers het wel.

[paardengek]

Taaccoo,

 

Natuurlijk werkt dat met newcamd. Effe zoeken <img src="/ubbthreads/images/graemlins/loep.gif" alt="" />, en je vindt dit:

 

http://www.sat4all.com/ubbthreads/showfl...;gonew=1#UNREAD

 

En dit:

http://www.sat4all.com/ubbthreads/showfl...part=1&vc=1

 

En dit:

 

http://www.sat4all.com/ubbthreads/showfl...part=1&vc=1

 

En dit:

 

http://www.sat4all.com/ubbthreads/showfl...part=3&vc=1

 

En dit:

 

http://www.sat4all.com/ubbthreads/showfl...part=1&vc=1

 

En dit:

 

http://www.sat4all.com/ubbthreads/showfl...true#Post759245

 

En dit:

 

http://www.sat4all.com/ubbthreads/showfl...part=2&vc=1

 

En dit:

 

http://www.sat4all.com/ubbthreads/showfl...p;page=3#752711

 

Dus leesvoer <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" /> <img src="/ubbthreads/images/graemlins/lezen.gif" alt="" /> genoeg.

 

In al deze topics staat uitgebreid geschreven hoe newcamd zo te configureren, dat de canal digital kaart (seca2) werkt en updates krijgt. Dit heeft niet zo zeer met de image te maken, maar de instellingen in de emu ( in dit geval newcamd) En de canal seca2 kaart werkt met de meeste images en emu's goed, ook de updates. Het is een kwestie van studie maken van de diverse treaths.

 

P.S. zo ziet mijn newcamd configuratie eruit:

( uit: var/tuxbox/config/cardserv.cfg)

 

# /var/tuxbox/config/cardserv.cfg

#

# The new cardserver can run several cards at once. It detects cards being

# inserted and removed from configured card readers. Every card uses its

# own TCP port to listen for incoming client connections. Card readers, that

# are configured, but where no card is inserted, will not be initialized.

# Supported are both serial ports of dbox2 (SERIAL_PORT = 0, 1), Dreambox

# cardreaders (SERIAL_PORT = 0 (upper), SERIAL_PORT = 1 (lower)) and the

# Dreambox's serial port (SERIAL_PORT = 2). Supported CA systems are Seca,

# Viaccess, Irdeto, Viasat-NDS, Conax, Cryptoworks and Nagra1. Irdeto cards (or

# some of them) probably won't work in the Dreambox cardreaders, due to driver

# issues. In fact, the only Irdeto cards, that were successfully tested in

# Dreambox cardreaders, are the new Premiere cards and I2 cards. Premiere cards

# will ONLY work with betad (no sharing allowed for Premiere). Betad is a small

# subset of cardserver, using Unix Domain Sockets to communicate with newcamd.

# Also betad will only understand a very small subset of the options described

# here. Each instance of betad will only be able to serve exactly one card,

# while one instance of cardserver can serve multiple cards at the same time.

# Therefore betad is not able to handle the sc8in1. Betad configuration file is

# called betad.cfg. There is no special manual for betad.cfg, we everyone will

# be able to figure out, which cardserv.cfg options, described below, will also

# work in betad.cfg and which won't.

# Configuration consists of global (all cards) and local (single card) options.

# betad.cfg will of course only have one local (single card) section. The

# global section is located at the beginning of the file before the first

# SERIAL_PORT option. The SERIAL_PORT option is a "divider" between the global

# and the local sections, it also is a divider between options for different

# cards. The SC8IN1_SLOT options is a similar divider, but it divides only

# between different cards in the sc8in1 cam and the first SC8IN1_SLOT options

# has to preceeded by a SERIAL_PORT option. Some options may appear in the

# global as well as in local sections, in the case the option in the global

# section is a default for all cards, that don't have the same option in their

# particular local section. Options that appear in an incorrect section will

# be rejected with a "parse error" and the cardserver won't start. Betad will

# also reject all cardserver options, that aren't necessary or allowed for its

# operation. betad will understand the following options, of used correctly:

# SERIAL_PORT, BAUDRATE, USER, PARITY, CARD_DETECT_INVERT, CARD_DETECT_BIT and

# IGNORE_CARD_DETECT_SWITCH.

#

# You can also start cardserver multiple times by specifying different cfg

# files in the command line. Use only the name of the cfg file, the path of the

# file is always fixed to /var/tuxbox/config (dbox2, Dreambox) or /etc (i386)

#

# (G) = global section only

# (L) = local section only

# (A) = all sections

#

# 14 byte des key for the connection (A)

# DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

#

# id name of the cardserver (G)

# SERVER_NAME = cardserv

#

# debug port, lists all cards and their open connections (G)

# just telnet to it

# DEBUG_PORT = 12002

#

# entitlement port, lists entitlements of Seca, Conax and Cryptoworks cards

# just telnet to it

# ENTITLEMENT_PORT = 12003

#

# optional admin options (G)

# port for incoming camdcmd connections

# password and 14 byte des key for admin connections

# ADMIN_PORT = 12004

# ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

#

# Userlist (A)

# there can be multiple users, user 1 always do AU for the card

# additional AU users can be defined by adding "au" at the end of the USER line

# keep in mind that your card number will be sent to all AU users

# global user preceed local users in terms of userid

# lan/wan/spider gives the type of connection

# lan = local area network

# wan = wide area network (those connections can be rebuild with camdcmd wanon)

# connections from cardspider to "wan" declared cards in cardserver are not

# possible

# spider = acts like wan, but allows connections from cardspider

# <username> <password> <lan/wan/spider> <newcamd hostname> <newcamd incoming cws port> (A)

# everything starting from <lan/wan> is optional (reverse login is optional)

# USER = dummy dummy lan dbox2 12000

# two examples for additional AU users

# USER = dummy2 dummy2 lan dbox2 12000 au

# USER = dummy3 dummy3 au

#

# CLIENT_CONNECT_TIMEOUT (in 100ms) (G)

# max time to wait for a login at a newcamd client

# CLIENT_CONNECT_TIMEOUT = 20

#

# debug options (A) - show network and card init, ecm and emm packages

# DEBUG_INIT = no

# DEBUG_NET = no

# DEBUG_ECM = no

# DEBUG_EMM = no

#

# Serial Port (Phoenix/Multicam) (Section divider)

# The first SERIAL_PORT options ends the global section

# On DM7000 SERIAL_PORT = 0 is the upper card slot,

# SERIAL_PORT = 1 is the lower card slot and 2 is the

# actual serial port.

# On DM500 SERIAL_PORT = 1 is the card slot, 2 is the

# serial port.

# All numbers SERIAL_PORT = 3 and higher on Dreambox will use /dev/usb/tts/X

# devices for Phoenix on USB-to-RS232 adapters. This feature depends on a

# driver for your particular SB->RS232 adapter being insmod into the kernel of

# your image, your particular USB->RS232 driver supporting RS232 handshaking

# signal generation and on the particular card used. Basically this feature

# should be considered unstable and for advanced users only. The BAUDRATE option

# is not available for SERIAL_PORT = 3 and higher on Dreambox and would be

# rejected with a parse error

# SERIAL_PORT = <no> begins a single card's local section

# SERIAL_PORT = 0

#

# Serial Port (sc8in1) (section devider)

# SERIAL_PORT = <no> sc8in1 begins a sc8in1 description

# SC8IN1_SLOT must follow immediately to start a local section

# SERIAL_PORT = 1 sc8in1

#

# sc8in1 slot (sc8in1 sub section divider)

# valid slots are 0-7, 0 being the left most connector on the sc8in1

# SC8IN1_SLOT = 1

#

# Parity - serial communication parameter for the smartcard (L)

# The default is on, which is correct for all cards except Irdeto

# This is for reading the ATR only, after the ATR has been recognized by

# cardserver, it automatically switches to the correct communication parameters

# Some Irdeto cards work with PARITY = on also, some need PARTIY = off, so just

# test it. Dreambox cardreaders don't need this option, so it will be rejected

# for SERIAL_PORT = 0, 1 on Dreambox

# PARITY = on

#

# CARD_DETECT_BIT (L)

# different Phoenix readers sometimes use different serial lines to detect an

# inserted card, here you can specify, which line cardserver should use for a

# particular card. Possible values are CTS, DCD and DSR

# Default is CTS for sc8in1 and dbox2 serport 1, DCD otherwise

# Will be rejected for SERIAL_PORT = 0, 1 on Dreambox (internal cardreaders)

# CARD_DETECT_BIT = DCD

#

# Baudrate (L) (DBOX2/DREAMBOX versions ONLY!)

# Baudrate selection for the dbox2/Dreambox server. Allows to run 6 MHz with

# 3.579 MHz crystal and (theoretically) the other way around.

# Keep in mind, running anything but Irdeto cards at 6 MHz is overclocking!!!

# Irdeto card at 3.57 MHz: BAUDRATE = 5727

# other card at 6 MHz: BAUDRATE = 16128

# Default is 9622, which is correct for all except Irdeto cards at 3.579 MHz

# 3579545 Hz / 372 = 9622 bit/s (see iso 7816)

# This option will be rejected on I386 and on Dreambox ports other than

# SERIAL_PORT = 2

# BAUDRATE = 9622

#

# TCP port (L) - the port listening for connections for a particular card

# TCP_PORT = 2000

#

# EMM options - block EMM-U, EMM-G or EMM-S (A)

# EMM-G = no

# EMM-S = no

# EMM-U = no

#

# For iso cardreaders that close the card switch contact instead of opening it,

# when a card is inserted (L)

# Will be rejected for SERIAL_PORT = 0, 1 on Dreambox (internal cardreaders)

# CARD_DETECT_INVERT = yes

#

# Disable Pin (L) Seca only

# suppress all pin enter requests on Seca cards

# be very careful with this feature, if you have ordered PPV events or have

# prepaid Jetons on your card, if this is enabled, cardserver will use them

# up on any ppv event without ever asking

# DISABLE_PIN = yes

#

# Special features (only for some cards) (L)

# SPECIAL_FEATURES = no

#

# Exclude services - Some providers offer a PPV preview by allowing a card

# to decrypt a certain number of ECMs of each PPV event before it has to be

# bought. Sharing such a card with other people allows them to "steal" this

# PPV preview. With this option, you can tell cardserver to not ask the card

# to decrypt ECMs for certain services, except if user 1 (the EMM user) asks

# for them. Each blocked service has to be listed with its service id.

# A service id is a 16-bit number and has to be given in hex.

# camdcmd offers a possibility to change the list of blocked services without

# restarting cardserver (if for example you have bought a PPV event and now

# want to share it).

#

# Block single service (L)

# EXCLUDE_SERVICE = 13a9

# You can also block a range of service ids, the following blocks all services

# from 02be to 02c8

# EXCLUDE_SERVICE_MULTIPLE = 02be:02c8

#

# Boxid (for Viasat-NDS cards only) (L)

# 10-digit serial number of the STB, your Viasat card is married to

# you find this serial number on your original Viasat STB in the following menu:

# Setup->Decoder information->STB Identifier

# take this number and remove the last digit

# take the first (left-most) 10 digits, omit the last (right-most) digit

# BOXID = 0000000000

#

# Boxkey (for Nagra1 cards only) (L)

# 8 byte des boxkey of your nagra smartcard. This boxkey is needed for proper

# use of your card, otherwise you'll get incorrect control words

# BOXKEY = 11 22 33 44 55 66 77 88

#

# Example

#

DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

SERVER_NAME = cardserv

DEBUG_PORT = 14000

ENTITLEMENT_PORT = 14001

ADMIN_PORT = 14002

ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

USER = root jag lan dreambox 12000

#user for cardspider access

USER = jagspideraccess przitaly au

#USER = dummy2 dummy2 lan dreambox 12000

#

# upper card slot

#

SERIAL_PORT = 0

TCP_PORT = 10000

EMM-G = yes

EMM-S = yes

EMM-U = yes

SPECIAL_FEATURES = no

#

# lower card slot

#

SERIAL_PORT = 1

TCP_PORT = 10001

EMM-G = yes

EMM-S = yes

EMM-U = yes

SPECIAL_FEATURES = no

DISABLE_PIN = yes

 

# serial port for fhenix

#

#SERIAL_PORT = 2

#TCP_PORT = 10002

#EMM-G = no

#EMM-S = no

#EMM-U = no

#SPECIAL_FEATURES = no

 

 

Met vriendelijke groeten, paardengek

[Gast]

paardengek

bedankt voor je hulp,maar is voor mij nog en beetje te moeilijk.Ben gewoon even de camx geprobeerd en hopla had beeld op alles.Zit nu met de gemini en camx en alles loopt als een speer.

 

 

Alvast bedankt

[Gast]

En dan gelijk ff om het overzichtelijk te houden alle zinnen die met een :

 

# beginnen verwijderen

[paardengek]

@Taaccoo,

 

Dat is goed nieuws, het is je gelukt !!

 

@Guardian,

 

Ik heb gewoon kopie en paste gebruikt om mijn bestand op mijn dreambox hier neer te zetten. Ik wil gewoon de topic starter helpen. Ik denk, dat je met jouw opmerking dat niet doet. Daarom mag van mij een moderator deze topic nu op slot zetten. Ook ten aanzien van hoeveel topics hier over gaan.

 

Met vriendelijke groet, paardengek

[SatWijchen]

@paardegek

 

Dank voor je lijstje bij mij heb ik ook geen beeld met m`n originele kaart Wel gehad nu kan ik de instellingen zo zetten dat ik weer updates krijg.

 

 

Ik denk (hoop)dat guardian de <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> <img src="/ubbthreads/images/graemlins/loldev.gif" alt="" /> is vergeten te plaatsen.

 

groeten satwijchen