vervoto1 Geplaatst: 22 april 2005 Delen Geplaatst: 22 april 2005 Op de een of andere manier update mijn canal+ kaart niet in de DM7000.. dat wil zeggen niet meer, met de oude hydra phoenix heeft hij met radegast nog een update gehad, newcamd wilde toen, ondanks het aanzetten van AU, ook al niet. Momenteel draai ik de nieuwste PLI, Gemini of DFI op USB en de originele in flash, allemaal doen ze het prima, op de update na. Ik heb werkelijk geen flauw idee wat ik verkeerd doe, de newcamd config is al een afgeleide van wat ome merde hier al eerder postte (ik heb gesearched tot ik een ons woog). Hieronder staan de newcamd 5.28 configs, die gebruik ik normaalgesproken. Radegast 3.14 beta heb ik ook geinstalleerd gehad, na het aanpassen van de configs krijg ik netjes beeld, maar geen updates (ook daar de blockings op off gezet) Zou het kunnen dat canal+ die dingen niet meer naar me toe stuurt (geen abonnement, wel netjes entreegeld betaald 4 maanden terug) ? de configs van de cardserver en newcamd zijn als volgt: -- cardserver.cfg -- DESKEY = 01 02 03 04 05 06 07 08 09 10 11 12 13 14 SERVER_NAME = cardserver DEBUG_PORT = 14000 ADMIN_PORT = 14001 ENTITLEMENT_PORT = 14002 ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00 USER = root dreambox lan au USER = remote remote lan # # upper card slot # SERIAL_PORT = 0 TCP_PORT = 10000 EMM-G = yes EMM-S = yes EMM-U = yes SPECIAL_FEATURES = yes # # lower card slot # SERIAL_PORT = 1 TCP_PORT = 10001 EMM-G = yes EMM-S = yes EMM-U = yes SPECIAL_FEATURES = yes -- newcamd.cfg -- # /var/tuxbox/config/newcamd.conf # # newcamd mandatory settings # # What Demux API is used? (1 = very old, 2 = rel (Dreambox), 3 = head (VDR)) DEMUX_API = 2 # on PPC version: What Box is used? Valid options are DBOX2, DM7000 and DM5600 # on I386 version this parameter is ignored BOX_TYPE = DM7000 # Which device for writing control words should be used? # Valid options are CA, SDEV or GTX # (SDEV and GTX = /proc/bus/gtx, CA = /dev/caX or /dev/dvb/card0/caX) CONTROL_WORD_DEVICE = CA # What CA0 API is used? # 3 for recent DVB-S driver or recent Dreambox drivers (dream.o from 1.07.3) # also for ca1 use on dbox2 # 2 for older Dreambox driver (ca.o or dream.o up to 1.07.2) # no effect on PPC version if CONTROL_WORD_DEVICE = GTX or SDEV CA_API = 2 # output control words to /proc/bus/gtx in 16 byte or 4096 byte packets # no effect on I386 version or on PPC version, if BOX_TYPE = DREAMBOX GTX_OUTPUT_MODE = 16 # This is important for channels which frequently change between free and # encrypted broadcasts. The change will be reflected in the PMT. If you # don't want your picture to stop when the channel goes from free access # mode to encrypted mode, either your zapper (zapit/Enigma) or newcamd # itself has to keep track of PMT changes. Recent Enigma versions do this, # so you can set PMT_UPDATE_WATCH to no. Recent Zapit versions also have # this option, but it is not compiled by default. So when using Zapit # without PMT updates, you need to enable newcamd to monitor the PMT # (PMT_UPDATE_WATCH = yes). Having both zapper and newcamd monitor # the PMT at the same time, can lead to all kind of instabilities and # should therefore by avoided, even if it seems to work at first. PMT_UPDATE_WATCH = no # Use emulator? EMU = yes # if both control word server and emulator keys are available for the # channel, which method should be tried first? PREFER_EMU = no # deactivates the dbox2 Betacrypt CAM # this has to be set to yes on Dreambox DISABLE_CAM = yes # use dbox2 Betacrypt CAM for caids 06, 17 or both (00)? CAM_CASYS = 17 # Autoupdate for Emu and Control Word Servers # AU is always yes if there are Betacrypt UDS control word server # connected to newcamd AU = yes # # newcamd debug options # # dumps all ca systems used by a channel on the console SHOW_ALL_CA_SYSTEMS = no # On Screen Display, neutrino, enigma or none OSD = enigma # Recent Enigma versions come with a new option "Use http authentication" # in the Expert Setup menu. If this option is enabled, the Enigma web server # requires all clients to authorize themselves with username (root) and # password (usually dbox2 or dreambox). The following option tells newcamd # about the authentication username and password to use for the web server # in order to be able to display its on screen information. OSD_WEB_LOGIN = root:dreambox # print debug messages about ECM handling DEBUG_ECM = no # print debug messages about EMM handling DEBUG_EMM = no # print debug messages about Control Word Server (CWS) DEBUG_CWS = no # print debug messages about dbox2 CAM (cam-alpha.bin) DEBUG_CAM = no # print command message to/from dbox2 CAM as hex strings DEBUG_CAM_HEX = no # print all plain control words used SHOW_CW = no # hex dump of entire PAT SHOW_PAT = no # hex dump of entire PMT SHOW_PMT = no # hex dump of entire ECM SHOW_ECM = no # hex dump of entire CAT SHOW_CAT = no # hex dump of entire EMM (AU) SHOW_EMM = no # show network ECM messages being sent and received from/to the cardservers SHOW_CWS_ECM = no # show network EMM messages being sent and received from/to the cardservers SHOW_CWS_EMM = no # hex dump of EMMs with wrong signature EMM_REPORT_WRONG_SIG = no # delay between channel zap and appearance of the OSD OSD_WAIT_TIME = 2000 # # newcamd optional settings # # Delay between reception of new control word and writing them into # the CSA registers # this is a default, can be changed for each individual key in keylist DEFAULT_CW_DELAY = 500 # reload config on every channel zap RELOAD_CONFIG_ON_ZAP = yes # reload keylist on every channel zap RELOAD_KEYLIST_ON_ZAP = no # write osd ca info to file # CA_INFO_FILE = /tmp/cainfo.txt CWS = 127.0.0.1 10000 root dreambox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver au CWS = 127.0.0.1 10001 root dreambox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver au CWS_CONNECT_TIMEOUT = 20 CWS_INCOMING_PORT = 12000 # Port to get a list of all connected cardservers, just telnet to it CWS_DEBUG_PORT = 12001 # send keep alive messages to servers to keep connections from dying by # unreasonable router NAT timeouts, make sure all cardservers/spiders you # conntect to are v5.22 or newer, otherwise you'll loose connection to them, # if set to yes CWS_KEEPALIVE = yes # # newcamd admin control options # (incoming port is the same as CWS_INCOMING_PORT) # # <password> <14 byte des key> # ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Link naar reactie Delen op andere sites Meer opties om te delen...
Ðeninux Geplaatst: 22 april 2005 Delen Geplaatst: 22 april 2005 http://www.sat4all.com/ubbthreads/showfl...p;page=3#861304 we zijn hier natuurlijk om elkaar te helpen .....maar niet op elke keer maar weer op nieuw uitleg te geven... met zulke vrgane komt het er op neer dat je geen zin hebt op ook maar even ietsiepietsie verder te kijken dan je neus lang is. DM-7020-Vu Duo- Dm 800 --Iphone4 Jailbreak Link naar reactie Delen op andere sites Meer opties om te delen...
vervoto1 Geplaatst: 22 april 2005 Auteur Delen Geplaatst: 22 april 2005 fijn dat je antwoordt, ware het niet dat ik dat topic, evenals vele andrere, al gelezen heb, en zelfs de default config van ome merde die in zijn setup netjes AU update (geeft hij zelf ook aan) al gedraaid heb. Als het zo'n kort door de bocht foutje is dan weet jij het vast wel te zien in die config, ik zie 'm niet. en uiteraard, ja de kaart zit in het onderste slot en ja de contactpunten zijn naar beneden, volgens de enigma output van newcamd draait NED1 ook netjes vanaf de kaart, alleen de AU werkt dus niet want m'n datum blijft staan op 30-4-5 Link naar reactie Delen op andere sites Meer opties om te delen...
paardengek Geplaatst: 23 april 2005 Delen Geplaatst: 23 april 2005 Vervoto1, Als ik je cfg file van newcamd bekijk, dan lijkt me dat goed. Dus als emu newcamd kiezen en vervolgens canal digitaal bellen voor een heractivatie/update. Dan zou het mijn inziens moeten lukken. Na het telefoontje naar canal digitaal, duurt het ca 20 min tot 30 min voordat je de update binnen hebt. Succes, paardengek Door veel lezen en prutsen kom je er wel! Link naar reactie Delen op andere sites Meer opties om te delen...
Aanbevolen berichten
Maak een account aan of log in om te reageren
Je moet een lid zijn om een reactie te kunnen achterlaten
Account aanmaken
Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!
Registreer een nieuwe accountInloggen
Heb je reeds een account? Log hier in.
Nu inloggen