VREESWIJK Geplaatst: 26 juli 2005 Delen Geplaatst: 26 juli 2005 Na mijn project van motoren, en seca2 met motor, ben ik met een nieuw project gestart. Ik wil een grotere emu met meer key`s zodat we de sky patch niet meer nodig hebben. Stap 1: 9 seca provider in plaats van 8 Stap 2: meer instelbare key`s voor seca Stap 3: 5mb emu in plaats van 4,1mb De bestanden zijn te openen met Defiant. De map waar in gewerkt wordt is install. Dit zijn de te bewerken file,s emu.cpi end.cpi p_emu.cpi p_emu1.cpi p_emu2.cpi p_setup.cpi Probeer dit blad schoon te houden van vragen over andere dingen als FW anders word het zo onoverzichtelijk. <img src="/forums/images/graemlins/regels.gif" alt="" /> . Eerste Strong 8000 en 8100 van NL & BE met : Motor sm3uni 28-12-03, : Spdif (AC3) 30-10-04, : 3x8 mb Flash 07-02-05 Link naar reactie Delen op andere sites Meer opties om te delen...
VREESWIJK Geplaatst: 26 juli 2005 Auteur Delen Geplaatst: 26 juli 2005 met deze aanpassing loopt de teller door tot 9 install:p_emu2.cpi if((commun.FOCUS1 == "NRPROV")) { if((commun.SYSTEM == 0x10)) { commun.NRPROV += 0x1; if((commun.NRPROV > 0x9)) { commun.NRPROV = 0x9; 927303-p_emu2.zip Eerste Strong 8000 en 8100 van NL & BE met : Motor sm3uni 28-12-03, : Spdif (AC3) 30-10-04, : 3x8 mb Flash 07-02-05 Link naar reactie Delen op andere sites Meer opties om te delen...
VREESWIJK Geplaatst: 26 juli 2005 Auteur Delen Geplaatst: 26 juli 2005 Deze sleutels moeten er bij 00 en 10 Menu 9 Dit hebben we nu 01--------- 11--------- 0C----------1C--------- 0D----------1D--------- 0E----------1E--------- En deze moeten er bij zodat we de sky patch niet meer nodig hebben 00----------10--------- Eerste Strong 8000 en 8100 van NL & BE met : Motor sm3uni 28-12-03, : Spdif (AC3) 30-10-04, : 3x8 mb Flash 07-02-05 Link naar reactie Delen op andere sites Meer opties om te delen...
VREESWIJK Geplaatst: 26 juli 2005 Auteur Delen Geplaatst: 26 juli 2005 De emu.pan is ook klaar key 00 en 10 kunnen geplaast worden. nu de cpi nog voor opslag 927312-emu.zip Eerste Strong 8000 en 8100 van NL & BE met : Motor sm3uni 28-12-03, : Spdif (AC3) 30-10-04, : 3x8 mb Flash 07-02-05 Link naar reactie Delen op andere sites Meer opties om te delen...
interpol Geplaatst: 26 juli 2005 Delen Geplaatst: 26 juli 2005 Zal m gelijk ff invoegen <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" /> Openbox sg9 HD PVR Link naar reactie Delen op andere sites Meer opties om te delen...
Smurf Geplaatst: 27 juli 2005 Delen Geplaatst: 27 juli 2005 in p_emu en P_emu1 moet ook nog een aantal adressen ophogen anders overschrijf je de PPUA van provider1 en de data van de Viaccess providers Bolt HD, strong srt8000 sattracker 4, srt4125 concord 1.05, hotbird, astra 1,2,3 Link naar reactie Delen op andere sites Meer opties om te delen...
VREESWIJK Geplaatst: 27 juli 2005 Auteur Delen Geplaatst: 27 juli 2005 Zo weer een stap verder nu de rest zoekken Dit zit in p_emu.cpi Set_Po_Text($CURRENT, "SYSTEM", (("¬ " + commun.TEMP2) + " š")); Set_Po_Text($CURRENT, "NRPROV", (("¬ " + itos(commun.NRPROV)) + " š")); if((commun.SYSTEM == 0x10)) { Set_Po_Text($CURRENT, "CODE04", "01"); Set_Po_Text($CURRENT, "CODE06", "0C"); Set_Po_Text($CURRENT, "CODE08", "0D"); Set_Po_Text($CURRENT, "CODE0A", "0E"); Set_Po_Text($CURRENT, "CODE0C", "00"); Set_Po_Text($CURRENT, "CODE05", "11"); Set_Po_Text($CURRENT, "CODE07", "1C"); Set_Po_Text($CURRENT, "CODE09", "1D"); Set_Po_Text($CURRENT, "CODE0B", "1E"); Set_Po_Text($CURRENT, "CODE0D", "10"); commun.ID_PROV = ""; ---------------------------------------------------------- if((commun.NRKEY == "01")) { Set_Po_Text($CURRENT, "KEY04", commun.KEY); } else { if((commun.NRKEY == "0C")) { Set_Po_Text($CURRENT, "KEY06", commun.KEY); } else { if((commun.NRKEY == "0D")) { Set_Po_Text($CURRENT, "KEY08", commun.KEY); } else { if((commun.NRKEY == "0E")) { Set_Po_Text($CURRENT, "KEY0A", commun.KEY); } else { if((commun.NRKEY == "00")) { Set_Po_Text($CURRENT, "KEY0C", commun.KEY); } else { if((commun.NRKEY == "11")) { Set_Po_Text($CURRENT, "KEY05", commun.KEY); } else { if((commun.NRKEY == "1C")) { Set_Po_Text($CURRENT, "KEY07", commun.KEY); } else { if((commun.NRKEY == "1D")) { Set_Po_Text($CURRENT, "KEY09", commun.KEY); } else { if((commun.NRKEY == "0E")) { Set_Po_Text($CURRENT, "KEY0B", commun.KEY); } if((commun.NRKEY == "0D")) { Set_Po_Text($CURRENT, "KEY10", commun.KEY); } Code 00 en 10 zijn 0C en 0D geworden . Eerste Strong 8000 en 8100 van NL & BE met : Motor sm3uni 28-12-03, : Spdif (AC3) 30-10-04, : 3x8 mb Flash 07-02-05 Link naar reactie Delen op andere sites Meer opties om te delen...
interpol Geplaatst: 27 juli 2005 Delen Geplaatst: 27 juli 2005 Vreeswijk, Volgens mij moet hij zo, zo had ik het de vorige keer ook gedaan. Je moet hexadecimaal doorrekenen. Set_Po_Text($CURRENT, "CODE04", "01"); Set_Po_Text($CURRENT, "CODE06", "0C"); Set_Po_Text($CURRENT, "CODE08", "0D"); Set_Po_Text($CURRENT, "CODE0A", "0E"); Set_Po_Text($CURRENT, "CODE05", "11"); Set_Po_Text($CURRENT, "CODE07", "1C"); Set_Po_Text($CURRENT, "CODE09", "1D"); Set_Po_Text($CURRENT, "CODE0B", "1E"); Set_Po_Text($CURRENT, "CODE0C", "00"); Set_Po_Text($CURRENT, "CODE0D", "10"); Openbox sg9 HD PVR Link naar reactie Delen op andere sites Meer opties om te delen...
VREESWIJK Geplaatst: 27 juli 2005 Auteur Delen Geplaatst: 27 juli 2005 CODE O0 en 10 kunnen volgens mij een willekeurige naam hebben als je het maar doorvoert, het kan ook 0C en 0D zijn. maar we moeten wel bijde hetzelfde aan houden. Ik zal bij mij ook 0C en 0D gebruiken voor het geval het wel wat uit maakt. Eerste Strong 8000 en 8100 van NL & BE met : Motor sm3uni 28-12-03, : Spdif (AC3) 30-10-04, : 3x8 mb Flash 07-02-05 Link naar reactie Delen op andere sites Meer opties om te delen...
VREESWIJK Geplaatst: 27 juli 2005 Auteur Delen Geplaatst: 27 juli 2005 CODE 0C en 0D bestaan al - code 0G en 0H zijn vrij. KEY 00 en 10 zijn ingebruik - KEY 12 en 13 zijn vrij dit betekend dat de emu.pan ook verandere moet. NRKEY 0C en 0D EN 0F zijn in gebruik - NRKEY 0G en 0H zijn vrij. Eerste Strong 8000 en 8100 van NL & BE met : Motor sm3uni 28-12-03, : Spdif (AC3) 30-10-04, : 3x8 mb Flash 07-02-05 Link naar reactie Delen op andere sites Meer opties om te delen...
interpol Geplaatst: 27 juli 2005 Delen Geplaatst: 27 juli 2005 Hoe bedoel je. In het seca gedeelte worden deze sleutels niet gebruikt. Viaccess is toch apart? pff. mijn deco doet het weer <img src="/forums/images/graemlins/blush.gif" alt="" /> Openbox sg9 HD PVR Link naar reactie Delen op andere sites Meer opties om te delen...
VREESWIJK Geplaatst: 27 juli 2005 Auteur Delen Geplaatst: 27 juli 2005 in het eerste deel haald hij sleutels op. daarna verdeeld hij ze in stappen seca irdeto nzv bij het ophalen komen deze kodes al voor daardoor liep mijn deco vast. nu loopt hij wel door. kijk maar bij p_emu.cpi Eerste Strong 8000 en 8100 van NL & BE met : Motor sm3uni 28-12-03, : Spdif (AC3) 30-10-04, : 3x8 mb Flash 07-02-05 Link naar reactie Delen op andere sites Meer opties om te delen...
VREESWIJK Geplaatst: 27 juli 2005 Auteur Delen Geplaatst: 27 juli 2005 p_emu is klaar. Index", 0x6B); Set_Po_Text($CURRENT, "TEXT9", global.TTX); Call_Script("commun:L1_Index", 0x6C); Set_Po_Text($CURRENT, "TEXT10", global.TTX); Set_Po_Text($CURRENT, "CODE00", ""); Set_Po_Text($CURRENT, "CODE01", ""); Set_Po_Text($CURRENT, "CODE02", ""); Set_Po_Text($CURRENT, "CODE03", ""); Set_Po_Text($CURRENT, "CODE04", ""); Set_Po_Text($CURRENT, "CODE05", ""); Set_Po_Text($CURRENT, "CODE06", ""); Set_Po_Text($CURRENT, "CODE07", ""); Set_Po_Text($CURRENT, "CODE08", ""); Set_Po_Text($CURRENT, "CODE09", ""); Set_Po_Text($CURRENT, "CODE0A", ""); Set_Po_Text($CURRENT, "CODE0B", ""); Set_Po_Text($CURRENT, "CODE0C", ""); Set_Po_Text($CURRENT, "CODE0D", ""); Set_Po_Text($CURRENT, "CODE0E", ""); Set_Po_Text($CURRENT, "CODE0F", ""); Set_Po_Text($CURRENT, "CODE0G", ""); Set_Po_Text($CURRENT, "CODE0H", ""); Set_Po_Text($CURRENT, "CODE10", ""); Set_Po_Text($CURRENT, "CODE11", ""); Set_Po_Text($CURRENT, "KEY00", ""); Set_Po_Text($CURRENT, "KEY01", ""); Set_Po_Text($CURRENT, "KEY02", ""); Set_Po_Text($CURRENT, "KEY03", ""); Set_Po_Text($CURRENT, "KEY04", ""); Set_Po_Text($CURRENT, "KEY05", ""); Set_Po_Text($CURRENT, "KEY06", ""); Set_Po_Text($CURRENT, "KEY07", ""); Set_Po_Text($CURRENT, "KEY08", ""); Set_Po_Text($CURRENT, "KEY09", ""); Set_Po_Text($CURRENT, "KEY0A", ""); Set_Po_Text($CURRENT, "KEY0B", ""); Set_Po_Text($CURRENT, "KEY0C", ""); Set_Po_Text($CURRENT, "KEY0D", ""); Set_Po_Text($CURRENT, "KEY0E", ""); Set_Po_Text($CURRENT, "KEY0F", ""); Set_Po_Text($CURRENT, "KEY10", ""); Set_Po_Text($CURRENT, "KEY11", ""); Set_Po_Text($CURRENT, "KEY12", ""); Set_Po_Text($CURRENT, "KEY13", ""); if((commun.SYSTEM == 0x10)) { commun.TEMP2 = "SECA"; } else { if((commun.SYSTEM == 0x20)) { commun.TEMP2 = "VIACCESS"; } else { if((commun.SYSTEM == 0x30)) { commun.TEMP2 = "NAGRA"; } else { if((commun.SYSTEM == 0x40)) { commun.TEMP2 = "IRDETO"; } else { if((commun.SYSTEM == 0x50)) { commun.TEMP2 = "CONAX"; } } } } } Set_Po_Text($CURRENT, "SYSTEM", (("¬ " + commun.TEMP2) + " š")); Set_Po_Text($CURRENT, "NRPROV", (("¬ " + itos(commun.NRPROV)) + " š")); if((commun.SYSTEM == 0x10)) { Set_Po_Text($CURRENT, "CODE04", "01"); Set_Po_Text($CURRENT, "CODE06", "0C"); Set_Po_Text($CURRENT, "CODE08", "0D"); Set_Po_Text($CURRENT, "CODE0A", "0E"); Set_Po_Text($CURRENT, "CODE0G", "12"); Set_Po_Text($CURRENT, "CODE05", "11"); Set_Po_Text($CURRENT, "CODE07", "1C"); Set_Po_Text($CURRENT, "CODE09", "1D"); Set_Po_Text($CURRENT, "CODE0B", "1E"); Set_Po_Text($CURRENT, "CODE0H", "13"); commun.ID_PROV = ""; for(commun.TEMP = 0x0; commun.TEMP <= 0x1; commun.TEMP += 0x1) { commun.TEMP1 = peek(dvb.emu,(((commun.NRPROV - 0x1) * 0x2) + commun.TEMP)); Call_Script("basic:hex", commun.TEMP1, 0x2, &commun.TEMPKEY); commun.ID_PROV += commun.TEMPKEY; } Set_Po_Text($CURRENT, "IDPROV", commun.ID_PROV); commun.PPUA = ""; for(commun.TEMP = 0x0; commun.TEMP <= 0x3; commun.TEMP += 0x1) { commun.TEMP1 = peek(dvb.emu,(0x10 + (((commun.NRPROV - 0x1) * 0x4) + commun.TEMP))); Call_Script("basic:hex", commun.TEMP1, 0x2, &commun.TEMPKEY); commun.PPUA += commun.TEMPKEY; } Set_Po_Text($CURRENT, "PPUA", commun.PPUA); for(commun.TEMP = 0x210; commun.TEMP <= commun.ENDEMU; commun.TEMP += 0xB) { commun.TEMP1 = peek(dvb.emu,commun.TEMP); commun.TEMP3 = peek(dvb.emu,(commun.TEMP + 0x1)); if(((commun.TEMP1 == 0x10) && (commun.TEMP3 == commun.NRPROV))) { commun.TEMP1 = peek(dvb.emu,(commun.TEMP + 0x2)); Call_Script("basic:hex", commun.TEMP1, 0x2, &commun.NRKEY); commun.KEY = ""; for(commun.TEMP3 = 0x0; commun.TEMP3 <= 0x7; commun.TEMP3 += 0x1) { commun.TEMP1 = peek(dvb.emu,((commun.TEMP + 0x3) + commun.TEMP3)); Call_Script("basic:hex", commun.TEMP1, 0x2, &commun.TEMPKEY); commun.KEY += commun.TEMPKEY; } if((commun.NRKEY == "01")) { Set_Po_Text($CURRENT, "KEY04", commun.KEY); } else { if((commun.NRKEY == "0C")) { Set_Po_Text($CURRENT, "KEY06", commun.KEY); } else { if((commun.NRKEY == "0D")) { Set_Po_Text($CURRENT, "KEY08", commun.KEY); } else { if((commun.NRKEY == "0E")) { Set_Po_Text($CURRENT, "KEY0A", commun.KEY); } } else { if((commun.NRKEY == "0G")) { Set_Po_Text($CURRENT, "KEY12", commun.KEY); } else { if((commun.NRKEY == "11")) { Set_Po_Text($CURRENT, "KEY05", commun.KEY); } else { if((commun.NRKEY == "1C")) { Set_Po_Text($CURRENT, "KEY07", commun.KEY); } else { if((commun.NRKEY == "1D")) { Set_Po_Text($CURRENT, "KEY09", commun.KEY); } else { if((commun.NRKEY == "1E")) { Set_Po_Text($CURRENT, "KEY0B", commun.KEY); } else { if((commun.NRKEY == "OH")) { Set_Po_Text($CURRENT, "KEY13", commun.KEY); } } } } } } } } } } } Set_Panel_Page($CURRENT, 0x1); } if((commun.SYSTEM == 0x20)) { Get_Po_Text($CURRENT, "TMORE", &basic.POLAR); Eerste Strong 8000 en 8100 van NL & BE met : Motor sm3uni 28-12-03, : Spdif (AC3) 30-10-04, : 3x8 mb Flash 07-02-05 Link naar reactie Delen op andere sites Meer opties om te delen...
VREESWIJK Geplaatst: 27 juli 2005 Auteur Delen Geplaatst: 27 juli 2005 p_emu2 het lukt niet key 13 te plaatsen.bezet? raceMessCat_01, "install\p_emu2.cpi"); if((commun.IA == 0xE)) { Get_Po_Focus($CURRENT, &commun.FOCUS1); if((commun.FOCUS1 == "SYSTEM")) { commun.SYSTEM += 0x10; if((commun.SYSTEM > 0x50)) { commun.SYSTEM = 0x50; } else { commun.NRPROV = 0x1; Call_Script("p_emu", 0xB); } } else { if((commun.FOCUS1 == "NRPROV")) { if((commun.SYSTEM == 0x10)) { commun.NRPROV += 0x1; if((commun.NRPROV > 0x9)) { commun.NRPROV = 0x9; } else { Call_Script("p_emu", 0xB); } } else { if((commun.SYSTEM == 0x20)) { commun.NRPROV += 0x1; if((commun.NRPROV > 0x14)) { commun.NRPROV = 0x14; } else { Call_Script("p_emu", 0xB); } } else { if((commun.SYSTEM == 0x30)) { commun.NRPROV += 0x1; if((commun.NRPROV > 0x5)) { commun.NRPROV = 0x5; } else { Call_Script("p_emu", 0xB); } } else { if((commun.SYSTEM == 0x40)) { commun.NRPROV += 0x1; if((commun.NRPROV > 0x9)) { commun.NRPROV = 0x9; } else { Call_Script("p_emu", 0xB); } } else { if((commun.SYSTEM == 0x50)) { commun.NRPROV += 0x1; if((commun.NRPROV > 0x2)) { commun.NRPROV = 0x2; } else { Call_Script("p_emu", 0xB); } } } } } } } else { if(((left(commun.FOCUS1, 0x3) == "KEY") && (commun.SYSTEM != 0x30))) { if((commun.FOCUS1 == "KEY00")) { Set_Panel_Focus($CURRENT, "KEY01"); } else { if((commun.FOCUS1 == "KEY02")) { Set_Panel_Focus($CURRENT, "KEY03"); } else { if((commun.FOCUS1 == "KEY04")) { Set_Panel_Focus($CURRENT, "KEY05"); } else { if((commun.FOCUS1 == "KEY06")) { Set_Panel_Focus($CURRENT, "KEY07"); } else { if((commun.FOCUS1 == "KEY08")) { Set_Panel_Focus($CURRENT, "KEY09"); } else { if((commun.FOCUS1 == "KEY0A")) { Set_Panel_Focus($CURRENT, "KEY0B"); } } else { if((commun.FOCUS1 == "KEY12")) { Set_Panel_Focus($CURRENT, "KEY12"); } else { if((commun.FOCUS1 == "KEY0C")) { Set_Panel_Focus($CURRENT, "KEY0D"); } else { if((commun.FOCUS1 == "KEY0E")) { Set_Panel_Focus($CURRENT, "KEY0F"); } else { if((commun.FOCUS1 == "KEY10")) { Set_Panel_Focus($CURRENT, "KEY11"); }hier moet hij staan maar ik krijg hem er niet in } } } } } Eerste Strong 8000 en 8100 van NL & BE met : Motor sm3uni 28-12-03, : Spdif (AC3) 30-10-04, : 3x8 mb Flash 07-02-05 Link naar reactie Delen op andere sites Meer opties om te delen...
interpol Geplaatst: 27 juli 2005 Delen Geplaatst: 27 juli 2005 Bedoel jij dit, <img src="/forums/images/graemlins/uitlachen.gif" alt="" /> <img src="/forums/images/graemlins/tongue.gif" alt="" /> #Volume C:\Defiant\Temp\p_emu2~0\p_emu2 #Module install #Script p_emu2.cpi(int commun.IA) { // Source C:\Defiant\Temp\p_emu2~0\p_emu2\install\p_emu2.cpi #Volume C:\Defiant\Temp\p_emu2~0\p_emu2 #Module install #CRC32 AFBC082B #ENDS 0 Default commun Public commun Public dvb Public global Write_Trace($TraceMessCat_01, "install\p_emu2.cpi"); if((commun.IA == 0xE)) { Get_Po_Focus($CURRENT, &commun.FOCUS1); if((commun.FOCUS1 == "SYSTEM")) { commun.SYSTEM += 0x10; if((commun.SYSTEM > 0x50)) { commun.SYSTEM = 0x50; } else { commun.NRPROV = 0x1; Call_Script("p_emu", 0xB); } } else { if((commun.FOCUS1 == "NRPROV")) { if((commun.SYSTEM == 0x10)) { commun.NRPROV += 0x1; if((commun.NRPROV > 0x9)) { commun.NRPROV = 0x9; } else { Call_Script("p_emu", 0xB); } } else { if((commun.SYSTEM == 0x20)) { commun.NRPROV += 0x1; if((commun.NRPROV > 0x14)) { commun.NRPROV = 0x14; } else { Call_Script("p_emu", 0xB); } } else { if((commun.SYSTEM == 0x30)) { commun.NRPROV += 0x1; if((commun.NRPROV > 0x5)) { commun.NRPROV = 0x5; } else { Call_Script("p_emu", 0xB); } } else { if((commun.SYSTEM == 0x40)) { commun.NRPROV += 0x1; if((commun.NRPROV > 0x9)) { commun.NRPROV = 0x9; } else { Call_Script("p_emu", 0xB); } } else { if((commun.SYSTEM == 0x50)) { commun.NRPROV += 0x1; if((commun.NRPROV > 0x2)) { commun.NRPROV = 0x2; } else { Call_Script("p_emu", 0xB); } } } } } } } else { if(((left(commun.FOCUS1, 0x3) == "KEY") && (commun.SYSTEM != 0x30))) { if((commun.FOCUS1 == "KEY00")) { Set_Panel_Focus($CURRENT, "KEY01"); } else { if((commun.FOCUS1 == "KEY02")) { Set_Panel_Focus($CURRENT, "KEY03"); } else { if((commun.FOCUS1 == "KEY04")) { Set_Panel_Focus($CURRENT, "KEY05"); } else { if((commun.FOCUS1 == "KEY06")) { Set_Panel_Focus($CURRENT, "KEY07"); } else { if((commun.FOCUS1 == "KEY08")) { Set_Panel_Focus($CURRENT, "KEY09"); } else { if((commun.FOCUS1 == "KEY0A")) { Set_Panel_Focus($CURRENT, "KEY0B"); } else { if((commun.FOCUS1 == "KEY0C")) { Set_Panel_Focus($CURRENT, "KEY0D"); } else { if((commun.FOCUS1 == "KEY0E")) { Set_Panel_Focus($CURRENT, "KEY0F"); } else { if((commun.FOCUS1 == "KEY10")) { Set_Panel_Focus($CURRENT, "KEY11"); } else { if((commun.FOCUS1 == "KEY12")) { Set_Panel_Focus($CURRENT, "KEY13"); } else { if((commun.FOCUS1 == "KEY0G")) { Set_Panel_Focus($CURRENT, "KEY0H"); Openbox sg9 HD PVR Link naar reactie Delen op andere sites Meer opties om te delen...
Aanbevolen berichten
Maak een account aan of log in om te reageren
Je moet een lid zijn om een reactie te kunnen achterlaten
Account aanmaken
Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!
Registreer een nieuwe accountInloggen
Heb je reeds een account? Log hier in.
Nu inloggen