Gast Geplaatst: 22 januari 2001 Geplaatst: 22 januari 2001 Hello,<P>ASSISTANCE I need assistance!!!!<BR> <BR>I tried to flash the firmware of my CI Irdeto Ver:1.06 SoftCell: Ver:2.09(CI)_Demusw CA) via the SCSI and Nokia MM 9600 with the DVB 2000 Ver:1.82.0s (26.09.2000) (soft Grabber Ver.2) and since I have IRDETO Ci ERROR!!! <P>Does exist a file SBR or other technology which could repair it and How ?<P>Best Regards to all.<BR>Champ <BR>
prutsie Geplaatst: 23 januari 2001 Geplaatst: 23 januari 2001 as far as I know it is not possible to flash those ci cams yet. but you have to ask the ci-doctor Schumi. schumi@gmx.net I think. To be sure please take a look at <A HREF="http://www.satnerds.com" TARGET=_blank>www.satnerds.com</A> Worst case scenario is that your ci must be opened, and a new flash eprom must be soldered in.<BR>regards,<BR>prutsie / peter. Niet gehinderd door enige vorm van technische kennis zet ik onbevangen overal mijn schroevendraaier en soldeerbout in.
Gast Geplaatst: 25 januari 2001 Geplaatst: 25 januari 2001 You don't need a new flasheeprom , but you have to reprogram your flash.
Gast Geplaatst: 25 januari 2001 Geplaatst: 25 januari 2001 You don't need a new flasheeprom , but you have to reprogram your flash.
Gast Geplaatst: 4 februari 2001 Geplaatst: 4 februari 2001 Hi,<BR>I test this file that i found on this link <A HREF="http://www.websamba.com/lotfinet/files/digtv/MiseAjourAston104.zip" TARGET=_blank>http://www.websamba.com/lotfinet/files/digtv/MiseAjourAston104.zip</A> <BR>on my SECA CAM, and the result is a DEAD CAM :°-( it Did not respond to my notebook, win win98 SE nor to my Mediamaster 9800S <BR>Be careful ...<P>To Tech you said <BR>>You don't need a new flasheeprom , but you >have to reprogram your flash. <P>Can you explain to us how we can reprogram the flasheeprom...<BR>Thanks
prutsie Geplaatst: 5 februari 2001 Geplaatst: 5 februari 2001 If you have aston1.03 cam, you should be able to reprogramm the flash with 1.03 software. 1.04 files are FAKE. if you have 1.04 aston, you can programm it to irdeto 1.05, and vice versa. this can be done without opening the cam. if you have other versions, the cam must be opened to reprogramm the flash. maybe you do not need a new flash, but it is not possible yet (to my knowledge) to programm those versions (yet). if you wat to be sure, ask schuminl, moderator from the satnerds board.<BR>peter. Niet gehinderd door enige vorm van technische kennis zet ik onbevangen overal mijn schroevendraaier en soldeerbout in.
Aanbevolen berichten