dbox icm tv-home kaart

Har-ry · 17 oktober 2007

Hey,

ik heb een Dbox2 met Sportster 1.10 RC009. Verder heb ik een Multicam NG².

Ik gebruik de @home pack van DRG en de nieuwe newcs.xml heb ik in var\tuxbox\config geplaatst. Ik woon in de regio Twente en mijn kaart begint met 4012...

Verder te vermelden geeft het nog, dat ik de kaart voor ca. 1 jaar met een andere adres dan mijn huidige adres geregistreerd heb en zinds dit datum niet meer gebruikt heb. Maar ik woon nog steeds in de gelijke stad en heb de kaart vandaag een tweede keer met de nieuwe adres geregistreerd.

Mijn telnet ouput ziet als volgd uit:

/var # newcs

Reading Config file /var/tuxbox/config/newcs.xml

level: normal

type: init

output: all

logger config: level 1 type 3 output 255

log file:

logger: cant open file , file log disabled

udp log: host port 0

Host lookup of failed

logger: cant connect udp to :0, udp log disabled

tcp port: 3001

[ 13:33:51 ] [ Box detect ] Box type 4

[ 13:33:51 ] [ Config ] Option <PPV> for device 0 (multicam) not present

[ 13:33:51 ] [ Config ] /dev/tts/1 ECM priority: round

[ 13:33:51 ] [ EMM Cache ] Initialising Cache with 50 entries

[ 13:33:51 ] [ ECM Cache ] Initialising Cache with 50 entries

[ NewCS ] Process id 1821

[ 13:33:51 ] [ Loader ] Reader type 4 on node /dev/tts/1

[ 13:33:51 ] [ Dbox ] Opening device /dev/tts/1

[ 13:33:53 ] [ Loader ] Unknown card

[ 13:33:53 ] [ Loader ] Trying Irdeto (T=14)

[ 13:33:53 ] [ Loader ] Reader type 4 on node /dev/tts/1

[ 13:33:53 ] [ Dbox ] Opening device /dev/tts/1

[ 13:33:54 ] [ Loader ] Init Irdeto card

[ 13:33:55 ] [ Keyman ] Adding key type 0 on Provider 000000 for caid 0604 ID=0

[ 13:33:55 ] [ Keyman ] Adding key type 1 on Provider 000000 for caid 0604 ID=0

[ 13:33:55 ] [ Keyman ] Adding key type 1 on Provider 000001 for caid 0604 ID=1

[ 13:33:55 ] [ Keyman ] Adding key type 1 on Provider 000002 for caid 0604 ID=2

[ 13:33:55 ] [ Keyman ] Adding key type 1 on Provider 000003 for caid 0604 ID=3

[ 13:33:56 ] [ Loader ] Card 0604 on port /dev/tts/1 ready

[ 13:33:56 ] [ Loader ] Starting Newcamd Server on port 15000

[ 13:33:56 ] [ NewCS ] Ready to GO! <img src="/forums/images/graemlins/smile.gif" alt="" />

/var # mgcamd

tuxbox mgcamd by mixvt Mar 22 2006 13:07:20 (v1.00pre10)

[mg] Net:1:3:0:10s Show ecm:0, emm:0 Up:1 Au:1 Dir:0 Osd:no:3 Cache:3 Log:2:127.0.0.1:28007 Reread:0

[mg] Ecm cache time: 15

Box type: dbox2

AutoRoll.Key: No such file or directory

Conax.Key: No such file or directory

SoftCam.Key: No such file or directory

/var # [config] newcamd route = user1:127.0.0.1:15000 server cardserv

newcamd keep alive: 0, incoming port: 12000

[ 13:34:03 ] [ Newcamd:15000 ] Connection from 127.0.0.1

[newcamd] Connecting to 127.0.0.1:15000...

[ 13:34:04 ] [ Newcamd:15000 ] User user1 logged in, client: Mgcamd

[newcamd] Login to 127.0.0.1:15000 as user1 accepted (22ms)

[newcamd] Card data from 127.0.0.1:15000 (60ms):

EMM enabled, Card serial: 19119C4D

Userid 1 caid 604 providers 4

Idents: 000000 000001 000002 000003

ids: 1B00 1FFFFFF 2FFFFFF 3FFFFFF

[ 14:20:45 ] [ Newcamd:15000 ] Connection from 127.0.0.1

[ 14:20:45 ] [ Newcamd:15000 ] User user1 logged in, client: Mgcamd

Signal 15 received

/var #

Op dit moment gaan alleen NED1 en verschillende regionale zenders.

Kan mij iemand helpen?

DRG · 17 oktober 2007

je hebt een camkey nodig als ik de output zo zie.

probeer deze eens

<irdeto-camkey>1122334455667788</irdeto-camkey>

<irdeto-camkey-data>3C8633AAC0D367533DEC7BB2EEEDEB8CA3ADA52E58B99BB34672783277A1DAAC3B6106AD0909774E031B2A6E30195B437683AD0FC599B87D08CEA47BE1B6C76A</irdeto-camkey-data>

wat betreft de oude kaart, gewoon even bellen en opnieuw laten activeren.

ik zie dat je een oud pack gebruikt, update newcs en mgcamd naar de laatste versie ( www.dreamboxworld.com kan je de laatste versies vinden )

let op je moet de mgcamd.ppc_old hebben.

Har-ry · 20 oktober 2007

Bedankt voor jouw hulp!! <img src="/forums/images/graemlins/smile.gif" alt="" />

Maar ik heb nog een aantal vraagjes:

- bij het updaten van newcs en mgcamd, moet ik daar nog iets aanpassen? En welke files heb ik nodig en waar naar toe moeten zij?

- moet ik mgcamd.ppc_old in mgcamd.ppc ombenoemen?

- hoe gaat het met het obnieuw laten activeren? Gewoon bellen en dan de camd3 activeren? Mogen mgcamd en camd3 tegelijketijd actief zijn?

DRG · 20 oktober 2007

1) je overschijft gewoon de bestaande files

2) mgcamd.ppc_old moet je uploaden als mgcamd

3) bellen en activatie opnieuw laten uitvoeren.

Ik heb verschillende berichten wat betreft activeren, de een claimt dat het werkt met newcs/mgcamd en de ander niet.

Ik zou alles updaten zorgen dat de kaart goed gedetecteerd word, en dan voor de activatiepuls even bellen.

mocht je met een uur geen beeld hebben dan camd3 proberen ( uiteraard newcs/mgcamd uitschakelen )

Har-ry · 20 oktober 2007

Ik heb nu:

- newcs.ppc (newcs) naar /var/emu

- bij newcs.xml.dbox keys toegevoegd

- newcs.xml.dbox (newcs.xml) naar /var/tuxbox/config/

- mgcamd.ppc_old (mgcamd) naar /var/emu

- mg_cfg naar /var/keys/

- met putty mgcamd en newcs gestopd

- met putty eerst newcs en dan mgcamd gestart

=

/var # newcs

Reading Config file /var/tuxbox/config/newcs.xml

level: normal

type: init

output: console,tcp

logger config: level 1 type 3 output 5

tcp port: 1001

[ 18:37:39 ] [ Box detect ] Box type 4

[ 18:37:39 ] [ Config ] /dev/tts/1 ECM priority: round

[ 18:37:39 ] [ EMM Cache ] Initialising Cache with 20 entries

[ 18:37:39 ] [ ECM Cache ] Initialising dynamic Cache

[ NewCS ] Process id 1579

[ 18:37:39 ] [ Loader ] Reader type 4 on node /dev/tts/1

[ 18:37:39 ] [ Dbox ] Opening device /dev/tts/1

[ 18:37:41 ] [ Loader ] Unknown card

[ 18:37:41 ] [ Loader ] Trying Irdeto (T=14)

[ 18:37:41 ] [ Loader ] Reader type 4 on node /dev/tts/1

[ 18:37:41 ] [ Dbox ] Opening device /dev/tts/1

[ 18:37:42 ] [ Loader ] Init Irdeto card

[ 18:37:43 ] [ Keyman ] Adding key type 0 on Provider 000000 for caid 0604 ID=0

[ 18:37:43 ] [ Keyman ] Adding key type 1 on Provider 000000 for caid 0604 ID=0

[ 18:37:43 ] [ Keyman ] Adding key type 1 on Provider 000001 for caid 0604 ID=1

[ 18:37:43 ] [ Keyman ] Adding key type 1 on Provider 000002 for caid 0604 ID=2

[ 18:37:43 ] [ Keyman ] Adding key type 1 on Provider 000003 for caid 0604 ID=3

[ 18:37:44 ] [ Loader ] Card 0604 on port /dev/tts/1 ready

[ 18:37:44 ] [ Loader ] Starting Newcamd Server on port 15000

[ 18:37:44 ] [ NewCS ] Ready to GO! <img src="/forums/images/graemlins/smile.gif" alt="" />

/var # [ 18:37:44 ] [ Newcamd ] recv: error! 111: Connection refused

[ 18:37:44 ] [ Newcamd:15000 ] User user1 logout

mgcamd

tuxbox mgcamd v1.25 by mixvt (compiled Sep 13 2007 20:50:31)

[mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:0

[mg] Ecm cache time: 15

Box type: dbox2

/var # Conax.Key error 2: No such file or directory

SoftCam.Key error 2: No such file or directory

AutoRoll.Key error 2: No such file or directory

Conax.Key error 2: No such file or directory

[config] newcamd route = user1:127.0.0.1:15000 server cardserv

newcamd keep alive: 0, incoming port: 12000

[mgcam] emm thread started

[mgcamd] tps update started.

[newcamd] Connecting to 127.0.0.1:15000...

[ 18:38:09 ] [ Newcamd:15000 ] Connection from 127.0.0.1

[ 18:38:09 ] [ Newcamd:15000 ] User user1 logged in, client: Mgcamd

[newcamd] Login to 127.0.0.1:15000 as user1 accepted (8ms)

[newcamd] Card data from 127.0.0.1:15000 (39ms):

EMM enabled: UA yes SA yes GA yes, Card serial: 19119C4D

Userid 1 caid 604 providers 4

Idents: 000000 000001 000002 000003

ids: 1B00 1FFFFFF 2FFFFFF 3FFFFFF

/var #

DRG · 20 oktober 2007

had je de camkey ook toegevoegd aan de newcs.xml ?

[ 13:33:55 ] [ Keyman ] Adding key type 0 on Provider 000000 for caid 0604 ID=0

[ 13:33:55 ] [ Keyman ] Adding key type 1 on Provider 000000 for caid 0604 ID=0

[ 13:33:55 ] [ Keyman ] Adding key type 1 on Provider 000001 for caid 0604 ID=1

[ 13:33:55 ] [ Keyman ] Adding key type 1 on Provider 000002 for caid 0604 ID=2

[ 13:33:55 ] [ Keyman ] Adding key type 1 on Provider 000003 for caid 0604 ID=3

lijkt erop dat je kaart niet goed uitgelezen word..

Har-ry · 21 oktober 2007

Hier is mijn huidige newcs.xml:

<?xml version="1.0"?>

<!--

For setup-issues, look in readme.txt!

If there are other troubles, try different forums or irc channels around <img src="/forums/images/graemlins/blush.gif" alt="" />)

The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.

** This is the example file for Dbox.

-->

<name>Multicam</name>

<reset>normal</reset>

<irdeto-camkey>1122334455667788</irdeto-camkey>

<irdeto-camkey-data>3C8633AAC0D367533DEC7BB2EEEDEB8CA3ADA52E58B99BB34672783277A1DAAC3B6106AD0909774E031B2A6E30195B437683AD0FC599B87D08CEA47BE1B6C76A</irdeto-camkey-data>

<crypto-special>No</crypto-special>

<newcamd_port>15000</newcamd_port>

<Seca-PPV>no</Seca-PPV>

<priority>round</priority>

</device>

</readers>

<allow>

<hostname>localhost</hostname>

</allow>

</radegastserver>

<cache>

</cache>

<debug>

<password>NewCSpwd</password>

<level>normal</level>

<output>console,tcp</output>

<console_options>normal,init</console_options>

<tcp_port>1001</tcp_port>

<tcp_options>normal,init</tcp_options>

</debug>

<name>newcs</name>

<user>

<hostname>localhost</hostname>

</user>

</newcamdserver>

</newCSconfig>

- Klopt bij user1 <port>12000</port> ?

- Moet ik newcamd.conf ook aanpassen?

newcamd.conf:

# /var/tuxbox/config/newcamd/newcamd.conf

#

# newcamd mandatory settings

#

# Use emulator?

EMU = yes

# if both control word server and emulator keys are available for the

# channel, which method should be tried first?

PREFER_EMU = yes

# Autoupdate for Emu and Control Word Servers

# AU is always yes if there are betad UDS control word server

# connected to newcamd

AU = yes

#

# OSD

#

# number of seconds to show the newcamd OSD, works on enigma only

# 0 seconds -> OSD off

OSD_TIMEOUT = 3

# Recent Enigma versions come with a new option "Use http authentication"

# in the Expert Setup menu. If this option is enabled, the Enigma web server

# requires all clients to authorize themselves with username (root) and

# password (usually dbox2 or dreambox). The following option tells newcamd

# about the authentication username and password to use for the web server

# in order to be able to display its on screen information.

OSD_WEB_LOGIN = root:dreambox

#

# newcamd debug options

#

# dumps all ca systems used by a channel on the console

SHOW_ALL_CA_SYSTEMS = no

# print debug messages about ECM handling

DEBUG_ECM = yes

# print debug messages about EMM handling

DEBUG_EMM = no

# print debug messages about Control Word Server (CWS)

DEBUG_CWS = yes

# print debug messages about dbox2 CAM (cam-alpha.bin)

DEBUG_CAM = yes

# hex dump of entire PAT

SHOW_PAT = no

# hex dump of entire PMT

SHOW_PMT = no

# hex dump of entire ECM

SHOW_ECM = no

# hex dump of entire CAT

SHOW_CAT = no

# hex dump of entire EMM (AU)

SHOW_EMM = no

# show network ECM messages being sent and received from/to the cardservers

SHOW_CWS_ECM = no

# show network EMM messages being sent and received from/to the cardservers

SHOW_CWS_EMM = no

# hex dump of EMMs with wrong signature

EMM_REPORT_WRONG_SIG = no

#

# newcamd optional settings

#

# Delay between reception of new control word and writing them into

# the CSA registers

# this is a default, can be changed for each individual key in keylist

DEFAULT_CW_DELAY = 0

# reload config on every channel zap

RELOAD_CONFIG_ON_ZAP = yes

# reload keylist on every channel zap

RELOAD_KEYLIST_ON_ZAP = no

# write osd ca info to file

CA_INFO_FILE = /tmp/cainfo.txt

#

# newcamd mandatory settings for control word servers (cws)

#

# Cardserver list

#

# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name>

#

# wan connections will be dropped and rebuild if newcamd is told so by camdcmd

# (see admin options)

#

# hostname = uds to use betad, port is the serial port in that case

#

CWS = 127.0.0.1 15000 user1 dbox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

#

# newcamd optional settings for using control word servers (cws)

#

# Timeout for cardserver login in 100ms

CWS_CONNECT_TIMEOUT = 20

# Port to listen for incoming cardserver connections (reverse login)

# and/or admin connections

CWS_INCOMING_PORT = 12000

# Port to get a list of all connected cardservers, just telnet to it

CWS_DEBUG_PORT = 12001

# send keep alive messages to servers to keep connections from dying by

# unreasonable router NAT timeouts, make sure all cardservers/spiders you

# conntect to are v5.25 or newer, otherwise you'll loose connection to them,

# if set to yes

# seems this feature is commonly misunderstood, it only keeps connections

# open even if no data packets are using it for while (NAT routers tend to

# forget about established tcp connections when they are inactive), it is

# NOT to automatically reconnect to servers, see also Q&A in readme.txt

CWS_KEEPALIVE = no

#

# newcamd admin control options

# (incoming port is the same as CWS_INCOMING_PORT)

#

# <password> <14 byte des key>

#

ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Ps: ik heb tvhome voor het reactiveren nog niet gebeld! Want mijn huidige configuratie klopt toch nog niet!!

JeWeetWelWie · 22 oktober 2007

Ik zal je en beetje helpen:

bij NewCS:

in het hoofdstuk 'Device' staat dit

<newcamd_port>15000</newcamd_port>

Dit betekent dat poort 15000 open staat voor requests

in je hoofdstuk 'Debug' staat dit

<tcp_port>1001</tcp_port>

set deze poort op 3001, dit is even beter.

in het hoofdstuk 'Users' / User1 staat

dit moet weg. Hier komt alleen maar gedonder van

in je Newcamd file staat:

CWS = 127.0.0.1 15000 user1 dbox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

Dit betekent dat je lokaal (127.0.0.1) via poot 15000 inlogt op je Newcs server.

Het zou nu zomaar nog wel eens kunnen gaan werken.

Bedenk wel: Bezint eer ge begint en na schade en schande wordt men wijs!

DRG · 22 oktober 2007

het is wel handig om de naam van de cardserver in zowel de newcs.xml als de newcamd.conf aan te houden.

<name>[color:"red"]newcs[/color]</name>

CWS = 127.0.0.1 15000 user1 dbox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan [color:"red"]cardserv[/color]

heb je met die camkey nog steeds dezelfde output met newcs ?

Inloggen

dbox icm tv-home kaart

Aanbevolen berichten

Har-ry

Beste reacties in dit onderwerp

Populaire dagen

Beste reacties in dit onderwerp

Populaire dagen

DRG

Har-ry

DRG

Har-ry

DRG

Har-ry

JeWeetWelWie

DRG

Maak een account aan of log in om te reageren

Account aanmaken

Inloggen

Wie is er online 0 leden

Overig

Activiteit