Wat betekent E19

[Gast]

Hoi,

 

Wie weet wat foutmelding E19 betekent op de Humax 5400?

Komt waarschijnlijk van het kaartje

 

Weet iemand een volledige lijst met de E meldingen?

 

Met Vriendelijke Groet <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" />,

 

 

Wil Weten

[Gast]

hallo Wil Weten,

 

Hierbij de codes die ik heb kunnen vinden.

 

E-HC/bC -- Incorrect header block(CRC-16)

The software is damaged. Re-download the software.

 

E-dC -- Incorrect data block(CRC-16)

The software is damaged. Re-download the software.

 

E-Hn/bF -- Invalid HDF version

This error can occur when you attempt to download Non-Superset STB software to Superset or Vice-Versa. Please check the STB model and the software.

 

E-Id -- Invalid system ID

This error can occur when you attempt to download F1 software to F1-CI. Please check the STB model and the software.

 

E-AC -- Incorrect application CRC-32

Download latest version of application software.

 

E-ut -- UART RX/TX time out

There is communication problem between source and target

1) Check whether the S/W is compressed or not and check whether you used the proper download tool for the software

2) Reduce the download speed and try to download again

3) Switch STB main power off/on and try to download again

4) Reboot the PC and try to download again

 

E-Ad -- Invalid address

Humax created the hdf file with an invalid address. Please notify Humax of this error and wait until Humax releases fixed software.

 

E-Ao -- Invalid offset address for upload(Odd offset)

There was a mistake when Humax made hdf file from binary file. Please let Humax know immediately and wait for a fix

 

E-Ft -- Flash program time out

The flash memory in the STB seems damaged. Please try to download again. If you fail agian, send the receiver back to Humax to have the flash memory device replaced

 

E-It/Et -- EEPROM program time out

The EEPROM in the STB seems damaged. Please try to download again. If it fails again, replace the EEPROM device

 

E-FE -- Fail compare after flash write

Flash memory is damaged. Return the main board( CPU Board)

 

E-HF -- Invalid HDF Format

Humax made the hdf file with wrong version. Please notify Humax of this error and wait until a fix is released

 

E-Fn -- Invalid flash device

Flash memory is defect. Need to change the flash memory so please return the Main Board

 

E-AS -- Incorrect application size

Check the software version and STB hardware specification

 

 

Red banner error Message

 

These codes may appear on your screen in a blue/red message banner. It displays the so called CAID used by the specific channel and can mean that you don't have legal rights to view this channel.

 

Hopelijk ben je hiermee geholpen

 

Groetjes Edwardje <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" /> <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" />

[pet123]

E19 Service is currently scrambled .. Access to service denied .. subscription problem

 

 

E03 CA module failure (Great for UEC - they only have a built in CAM)

E04 Please reset smartcard .......... The smartcard in not inserted or a SSD is not recognised

E05 Unknown card .................... The smartcard is not applicable to this system

E06 Smartcard failure ............... (You have cooked it)

E07 Checking Smartcard .............. If after 30 seconds the message still appears re-insert card

E08 CA module failure ...............

E09 CAD EEPROM error ............... The smartcard is malfunctioning

E11 Updating CAD EEPROM .......... The decoder is briefly checking smartcard - can take 60 seconds

E12 CAM failure

E13 CAM failure

E14 Service is currently scrambled .. Transmission problem .. wait for transmission resumption - also means timezone blocked

E15 Not used at present E15 Smartcard error ................ Smartcard is damaged

E16 Service is currently scrambled .. Access to the service is denied

E17 Service is currently scrambled .. Access to the service is denied

E18 Unknown card ................... The smartcard is not applicable to this system

E19 Service is currently scrambled .. Access to service denied .. subscription problem

E20 Service is currently scrambled .. Access to service denied

E21 Service is currently scrambled .. Access to service denied

E22 Event Purchased

E23 Preview period

E24 Service is currently scrambled .. Access to service denied also can mean smartcard not compatible

E25 Event already purchased

E26 Event for sale cheap ........ Special of the day (Not the 2000 Olympics)

E27 No further purchases possible ... Event limit reached

E28 Credit limit reached ,,,,,,,,,,,, Entitlement credits to smartcard exhausted

E30 Service is currently scrambled .. Access to service denied

E31 Service is currently scrambled .. Access to service denied

E32 Service is currently scrambled .. Access to service denied

E34 Service is currently scrambled .. Access to service denied . Unplug and re-insert CAM (does not apply to UEC)

E35 Service is currently scrambled .. Access to service denied

E37 Service unknown ................. System error

E38 Service is currently not running Service is being used for a special event

E39 Locating service ................ The decoder is busy locating a service.

E40 IRD memory full ................. System error

E41 Service is not currently available The programme has been blocked by means of Program Blocking - reassign blocking level.

E42 Parental Control Lock ............ The service has been blocked - Reset blocking level if required

E43 Not allowed in this country ...... Wrong smartcard for this service

E45 Service is not allowed ........... T he satellite dish is not receiving a signal

E46 Reading satellite information ,,,,

E47 No soundtrack available .......... An unavailable language has been selected

E49 LNB overload detected ............ Installation fault, check for short circuits.

E50 No service available

E53 Incorrect PIN

E54 IPPV OK

E55 No event information found

E64 Invalid tuning parameters

[Gast]

<img src="/forums/images/graemlins/xyxthumbs.gif" alt="" /> <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" /> <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" />

 

Kijk daar kan ik wat mee, een prima lijst

 

Mijn dank Pet123

 

Met Vriendelijke Groet <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" />,

 

 

Wil Weten