[DBOX-II] Probleem met newcamd en newcs (op pc)

[iTiSi]

Na vele uren lees en zoekwerk lukt het mij (dbox2 newbee) niet om met newcamd (V6.10) verbinding te maken met newcs (V1.13).

 

Maar ik zal bij het begin beginnen...

-------------------------------------

Ik heb de dbox2 (Sagem kabel) geflashed met Sportster-Pro_1.08_RC007_20061116_1931_1xI.img

Daarna in var/tuxbox/config/zapit de juiste zenderlijst geplaatst.

In var/keys/scce de newcamd scce bestanden geplaatst.

In var/bin/emu de newcamd en newcamd.conf geplaatst en 777 rechten gezet op newcamd.

Vervolgens de box geboot en de emu newcamd gekozen in het menu.

Wel beeld op het "vrije" kanaal Nederland 1.

 

Op een pc met Mastera IV newCS ingericht, dat lijkt goed te draaien.

De box lijkt echter geen verbinding te maken met newcs en ik snap niet waarom.

Waarschijnlijk kijk ik er overheen of mak een denkfout.

De virusscanner en firewall zijn uitgeschakeld.

Als ik van een andere pc in het lan met telnet een verbinding maak met newcs (port 10001) dan krijg ik wel te zien dat er verbinding is maar van de box niet!

[ 11:34:26 ] [ Newcamd:10001 ] Connection from 192.168.1.30 (telnet verbinding van pc)

 

Ik hoop dat een wakkere sat4all gebruiker ziet wat er mis is...

Alvast bedankt voor de moeite!

 

 

 

Hieronder de output van newcs en de configs van newcs en newcamd

 

Output newcs

---------------------------

Reading Config file newcs.xml

level: normal

type: init

output: all

logger config: level 1 type 3 output 255

log file: logfile.txt

udp log: host 192.168.1.8 port 10001

tcp port: 3001

[ 11:00:44 ] [ Box detect ] Windows XP Build 2600

[ 11:00:44 ] [ Config ] Option <PPV> for device 0 (phoenix) not present

[ 11:00:44 ] [ Config ] COM1 ECM priority: round

[ 11:00:44 ] [ EMM Cache ] Initialising Cache with 100 entries

[ 11:00:44 ] [ ECM Cache ] Initialising Cache with 100 entries

[ 11:00:44 ] [ Loader ] Reader type 2 on node COM1

[ 11:00:44 ] [ Phoenix ] Opening device COM1

[ 11:00:44 ] [ Phoenix ] Setting baud to 16129

[ 11:00:44 ] [ Phoenix ] Failed changing baud to 16129, trying 16457 instead

[ 11:00:44 ] [ Phoenix ] Setting baud to 16457

[ 11:00:45 ] [ Loader ] Unknown card

[ 11:00:45 ] [ Loader ] Trying Irdeto (T=14)

[ 11:00:45 ] [ Loader ] Reader type 2 on node COM1

[ 11:00:45 ] [ Phoenix ] Opening device COM1

[ 11:00:45 ] [ Phoenix ] Setting baud to 9600

[ 11:00:46 ] [ Loader ] Init Irdeto card

[ 11:00:46 ] [ Phoenix ] Setting baud to 9600

[ 11:00:46 ] [ Keyman ] Adding key type 0 on Provider 000000 for caid 0xxx ID=0

[ 11:00:47 ] [ Keyman ] Adding key type 1 on Provider 000000 for caid 0xxx ID=0

[ 11:00:47 ] [ Keyman ] Adding key type 1 on Provider 000001 for caid 0xxx ID=1

[ 11:00:47 ] [ Keyman ] Adding key type 1 on Provider 000002 for caid 0xxx ID=2

[ 11:00:47 ] [ Keyman ] Adding key type 1 on Provider 000003 for caid 0xxx ID=3

[ 11:00:48 ] [ Loader ] Card 0xxx on port COM1 ready

[ 11:00:48 ] [ Loader ] Starting Newcamd Server on port 10001

 

 

Config newcs

------------------------

<?xml version="1.0"?>

<!--

 

For setup-issues, look in readme.txt!

If there are other troubles, try different forums or irc channels around <img src="/forums/images/graemlins/blush.gif" alt="" />)

 

-->

 

 

 

<newCSconfig>

 

<readers name="Card Readers">

<device>

<name>phoenix</name>

<type>Phoenix</type>

<node>COM1</node>

<mhz>600</mhz> <!-- or 600 -->

<parity>none</parity>

<export>yes</export>

<enabled>yes</enabled>

<blocksa>No</blocksa>

<blockua>No</blockua>

<blockga>No</blockga>

<boxkey>0000000000</boxkey>

<PTShandshake>yes</PTShandshake>

<crypto-special>yes</crypto-special>

<carddetect>no</carddetect>

<newcamd_port>10001</newcamd_port>

<priority>round</priority> <!-- hard is default -->

<sid>

<allow>

<!-- valid value for id are:

4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->

<id></id>

</allow>

<deny>

<!-- valid value for id are:

4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->

<id></id>

</deny>

</sid>

</device>

 

 

</readers>

 

<radegastserver>

<!-- valid value for enable are:

0,1 - Enable or Disable radegast server. -->

<enabled>no</enabled>

 

<!-- valid value for port are:

0,65535 - Which port to listen for incomming connections. -->

<port>10002</port>

 

<!-- valid value for allow are:

ALL - Not active yet. -->

<allow>

<hostname>127.0.0.1</hostname>

</allow>

</radegastserver>

<cache>

<emm>100</emm>

<ecm>100</ecm>

</cache>

<debug>

<level>normal</level>

<type>init</type>

<output>all</output>

<logfile>logfile.txt</logfile>

<console_options></console_options>

<file_options></file_options>

<udp_host>192.168.1.8</udp_host>

<udp_port>10001</udp_port>

<udp_options></udp_options>

<tcp_port>3001</tcp_port>

<tcp_options></tcp_options>

</debug>

<newcamdserver>

<enabled>yes</enabled>

<name>newcs</name>

<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

<userfile></userfile>

<user>

<name>test</name>

<password>test</password>

<au>on</au>

<spider>no</spider>

</user>

<user>

<name>user2</name>

<password>pass2</password>

<au>on</au>

<spider>no</spider>

</user>

<user>

<name>user3</name>

<password>pass3</password>

<au>on</au>

<spider>no</spider>

</user>

<user>

<name>user4</name>

<password>pass4</password>

<au>on</au>

<spider>no</spider>

</user>

<!-- Remove if you dont use reverse login

<user>

<name>User5</name>

<password>Pass5</password>

<hostname>localhost</hostname>

<port>12345</port>

<spider>yes</spider>

</user>

-->

 

</newcamdserver>

</newCSconfig>

 

 

 

Config newcamd

--------------------------

# /var/tuxbox/config/newcamd/newcamd.conf

#

# newcamd mandatory settings

#

# Use emulator?

EMU = yes

# if both control word server and emulator keys are available for the

# channel, which method should be tried first?

PREFER_EMU = yes

# Autoupdate for Emu and Control Word Servers

# AU is always yes if there are betad UDS control word server

# connected to newcamd

AU = yes

#

# OSD

#

# number of seconds to show the newcamd OSD, works on enigma only

# 0 seconds -> OSD off

# 1 second -> show "Can't decode" messages only

OSD_TIMEOUT = 3

# Recent Enigma versions come with a new option "Use http authentication"

# in the Expert Setup menu. If this option is enabled, the Enigma web server

# requires all clients to authorize themselves with username (root) and

# password (usually dbox2 or dreambox). The following option tells newcamd

# about the authentication username and password to use for the web server

# in order to be able to display its on screen information.

OSD_WEB_LOGIN = root:dbox2

#

# newcamd debug options

#

# dumps all ca systems used by a channel on the console

SHOW_ALL_CA_SYSTEMS = yes

# print debug messages about ECM handling

DEBUG_ECM = yes

# print debug messages about EMM handling

DEBUG_EMM = no

# print debug messages about Control Word Server (CWS)

DEBUG_CWS = yes

# print debug messages about dbox2 CAM (cam-alpha.bin)

DEBUG_CAM = yes

# hex dump of entire PAT

SHOW_PAT = no

# hex dump of entire PMT

SHOW_PMT = no

# hex dump of entire ECM

SHOW_ECM = no

# hex dump of entire CAT

SHOW_CAT = no

# hex dump of entire EMM (AU)

SHOW_EMM = no

# show network ECM messages being sent and received from/to the cardservers

SHOW_CWS_ECM = no

# show network EMM messages being sent and received from/to the cardservers

SHOW_CWS_EMM = no

# hex dump of EMMs with wrong signature

EMM_RE_WRONG_SIG = no

#

# newcamd optional settings

#

# Delay between reception of new control word and writing them into

# the CSA registers

# this is a default, can be changed for each individual key in keylist

DEFAULT_CW_DELAY = 0

# reload config on every channel zap

RELOAD_CONFIG_ON_ZAP = yes

# reload keylist on every channel zap

RELOAD_KEYLIST_ON_ZAP = no

# write osd ca info to file

CA_INFO_FILE = /tmp/cainfo.txt

#

# newcamd mandatory settings for control word servers (cws)

#

# Cardserver list

#

# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name> [noecm]

#

# wan connections will be dropped and rebuild if newcamd is told so by camdcmd

# (see admin options)

#

# If the last word in the CWS line is noecm, newcamd will not attempt to send

# any ecms to that card, it will only send EMMs (AU) if userid is 1. Useful if

# you want to merge several cards of one provider into one port using

# cardspider.

#

# hostname = uds to use betad, port is the serial port in that case

#

# CWS = uds 1 dummy dummy

# CWS = linux.domain.com 10000 dummy2 dummy2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

# CWS = 127.0.0.1 10000 dummy3 dummy3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

# CWS = uds 1 test test

CWS = 192.168.1.8 10001 test test 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs

#

# newcamd optional settings for using control word servers (cws)

#

# Timeout for cardserver login in 100ms

CWS_CONNECT_TIMEOUT = 20

# Port to listen for incoming cardserver connections (reverse login)

# and/or admin connections

CWS_INCOMING_PORT = 12000

# Port to get a list of all connected cardservers, just telnet to it

CWS_DEBUG_PORT = 12001

# send keep alive messages to servers to keep connections from dying by

# unreasonable router NAT timeouts, make sure all cardservers/spiders you

# conntect to are v5.25 or newer, otherwise you'll loose connection to them,

# if set to yes

# seems this feature is commonly misunderstood, it only keeps connections

# open even if no data packets are using it for while (NAT routers tend to

# forget about established tcp connections when they are inactive), it is

# NOT to automatically reconnect to servers, see also Q&A in readme.txt

CWS_KEEPALIVE = no

#

# newcamd admin control options

# (incoming port is the same as CWS_INCOMING_PORT)

#

# <password> <14 byte des key>

#

ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00

[DRG]

"In var/bin/emu de newcamd en newcamd.conf geplaatst en 777 rechten gezet op newcamd"

 

de newcamd.conf moet in /var/tuxbox/config staan ( iig bij mgcamd ), maar plaats hem ook in /var/tuxbox/config/newcamd ( mocht newcamd daar kijken )

 

aan de output van newcs te zien mis je een camkey..

[iTiSi]

Ok, de newcamd.conf daar ook geplaatst en newcs meld nu dat een een verbinding is...

[ 12:32:52 ] [ Loader ] Starting Newcamd Server on port 10001

[ 13:41:22 ] [ Newcamd:10001 ] Connection from 192.168.1.20

[ 13:41:23 ] [ Newcamd:10001 ] User test logged in, client: Generic

Alleen nog geen beeld...

[inthehouse]

aan de output van newcs te zien mis je een camkey..

[iTiSi]

Citaat:

aan de output van newcs te zien mis je een camkey..

OK, ben al druk zoekende maar nog geen juiste camkey gevonden. (denk ik)
Heb dit al geprobeerd zonder resultaat...

irdeto-camkey
1122334455667788

irdeto-camkey-data 3C8633AAC0D367533DEC7BB2EEEDEB8CA3ADA52E58B99BB34672783277A1DAAC3B6106AD0909774E031B2A6E30195B437683AD0FC599B87D08CEA47BE1B6C76A

Nog tips mischien?

OJA, voor de camkey ben ik overgestapt op newcs V1.20 RC13
en het HOME kaartje begint met 4014

[iTiSi]

Hehe, het werkt. Nadat de box is opgestart blijkt dat het wel werkt na een cam reset.

Nou nog uitzoeken waarom dat nodig is maar er is vooruitgang.

Bedankt voor de hulp.

[DRG]

probeer anders voor de test even mgcamd ipv newcamd..

[iTiSi]

Citaat:

probeer anders voor de test even mgcamd ipv newcamd..

Goed idee, ik was zelf al aan het proberen met CCcam.
Met newcamd duurt het met enkele kanalen wel lang voor er beeld is, andere hebben direct beeld.
Kan dit aan de cam liggen of maakt dat niets uit?

[DRG]

er zit zeker veel verschil in de cam's.. zelfs tussen versies..