opeNSLUg hoe verder

[Tonskidutch]

hoi,

 

ik heb wel enkele draadjes zitten volgen en ook aan bijgedragen, waar enkele mensen op NSLU2 openslug hebben geinstalleerd wegens allerlei nieuwe driver voordelen

 

ik denk dan moet ik om de verwarring te voorkomen ook maar eens openslug gaan installeren...

 

TJA prachtig het staat erop maar wat nu

heb geen webinterface meer

heb geen ftp opties

heb geen samba opties

alles wat ik gewend was aan uNSLUng is er niet

 

staat te lezen dat dit een minimal installatie is en dat je alles per IPKG erin laad,

daar hangt het dus op want niks noppes nada is via IPKG te krijgen / welke feeds worden er momenteel gebruikt????

 

effe ter illustratie (met putty gecopieerd) wat ik wel kan is telnet:

 

Code:

 Linux version 2.6.16 (slug@nudi) (gcc version 3.4.4) #1 PREEMPT Fri Jun 9 07:34:31 PDT 2006CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)Machine: Linksys NSLU2Ignoring unrecognised tag 0x00000000Memory policy: ECC disabled, Data cache writebackOn node 0 totalpages: 8192  DMA zone: 8192 pages, LIFO batch:1  DMA32 zone: 0 pages, LIFO batch:0  Normal zone: 0 pages, LIFO batch:0  HighMem zone: 0 pages, LIFO batch:0CPU0: D VIVT undefined 5 cacheCPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 setsCPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 setsBuilt 1 zonelistsKernel command line: root=/dev/mtdblock4 rootfstype=jffs2 init=/linuxrc rtc-x1205.probe=0,0x6f  noirqdebug console=ttyS0,115200n8PID hash table entries: 256 (order: 8, 4096 bytes)IXP4xx: FREQ=66666600 COUNT=666665Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)Memory: 32MB = 32MB totalMemory: 30188KB available (1929K code, 180K data, 92K init)Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)Mount-cache hash table entries: 512CPU: Testing write buffer coherency: okNET: Registered protocol family 16IXP4xx: Using 16MiB expansion bus window sizePCI: IXP4xx is hostPCI: IXP4xx Using direct access for memory spacePCI: bus0: Fast back to back transfers disabledIXP4xx: FREQ=66000000 COUNT=660001dmabounce: registered device 0000:00:01.0 on pci busdmabounce: registered device 0000:00:01.1 on pci busdmabounce: registered device 0000:00:01.2 on pci busSCSI subsystem initializedusbcore: registered new driver usbfsusbcore: registered new driver hubNetWinder Floating Point Emulator V0.97 (double precision)JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.Initializing Cryptographic APIio scheduler noop registeredio scheduler deadline registered (default)Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabledserial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScaleserial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScaleRAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksizelibata version 1.20 loaded.ata1: PATA max PIO4 cmd 0xC2852000 ctl 0xC285201E bmdma 0x0 irq 12scsi0 : ixp4xxNFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bankIXP4XX-Flash.0: Found an alias at 0x800000 for the chip at 0x0 Intel/Sharp Extended Query Table at 0x0031Using buffer write methodcfi_cmdset_0001: Erase suspend on write enablederase region 0: offset=0x0,size=0x20000,blocks=64Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000RedBoot directory 0x507e0000(0x20000) native6 RedBoot partitions found on MTD device IXP4XX-Flash.0Creating 6 MTD partitions on "IXP4XX-Flash.0":0x00000000-0x00040000 : "RedBoot"0x00040000-0x00060000 : "SysConf"0x00060000-0x00160000 : "Kernel"0x00160000-0x00180000 : "Ramdisk"0x00180000-0x007e0000 : "Flashdisk"0x007e0000-0x00800000 : "FIS directory"Using configured DiskOnChip probe address 0x50000000PCI: enabling device 0000:00:01.2 (0140 -> 0142)ehci_hcd 0000:00:01.2: EHCI Host Controllerehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 5 ports detectedohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)PCI: enabling device 0000:00:01.0 (0140 -> 0142)ohci_hcd 0000:00:01.0: OHCI Host Controllerohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 3 ports detectedPCI: enabling device 0000:00:01.1 (0140 -> 0142)ohci_hcd 0000:00:01.1: OHCI Host Controllerohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detectedUSB Universal Host Controller Interface driver v2.3Initializing USB Mass Storage driver...usbcore: registered new driver usb-storageUSB Mass Storage support registered.input: ixp4xx beeper as /class/input/input0i2c /dev entries driverx1205 0-006f: chip found, driver version 1.0.6x1205 0-006f: rtc intf: sysfsx1205 0-006f: rtc intf: procx1205 0-006f: rtc intf: dev (254:0)x1205 0-006f: rtc core: registered x1205 as rtc0Registered led device: readyRegistered led device: statusRegistered led device: disk-1Registered led device: disk-2NET: Registered protocol family 2IP route cache hash table entries: 512 (order: -1, 2048 bytes)TCP established hash table entries: 2048 (order: 1, 8192 bytes)TCP bind hash table entries: 2048 (order: 1, 8192 bytes)TCP: Hash tables configured (established 2048 bind 2048)TCP reno registeredTCP bic registeredNET: Registered protocol family 1x1205 0-006f: setting the system clock to 2007-04-14 16:29:58 (1176568198)VFS: Mounted root (jffs2 filesystem) readonly.Freeing init memory: 92Kixp400: module license 'unspecified' taints kernel.ixp400: Module init.ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. 1.5ixp400_eth: CPU clock speed (approx) = 266 MHz[message] ixEthMiiPhyScan, Mii 1: Mii PHY ID 00008201ixp400_eth: Found PHY 0 at address 1ixp400_eth: ethernet 0 using NPEB and the PHY at address 1ixp400_eth: Use default MAC address 00:02:b3:01:01:01 for port 0ixp400_eth: MAC address now set to 00:0f:66:7f:67:25 for port 0root@SERVER-2:~# 

 

WIE kan me in ieder geval even op weg helpen zodat ipkg weer update en upgrade???????????????? <img src="/forums/images/graemlins/confused.gif" alt="" />

 

cheers

[Tonskidutch]

Code:

 root@SERVER-2:/# ipkg updateDownloading http://ipkg.nslu2-linux.org/feeds/slugos-bag/cross/3.10-beta/Packages.gzwget: ipkg.nslu2-linux.org: Host name lookup failureDownloading http://ipkg.nslu2-linux.org/feeds/slugos-bag/native/3.10-beta/Packages.gzwget: ipkg.nslu2-linux.org: Host name lookup failureAn error ocurred, return value: 2.Collected errors:ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp    -q -P /tmp/ipkg-B3FrEg http://ipkg.nslu2-linux.org/feeds/slugos-bag/cross/3.10-beta/Packages.gz'ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp    -q -P /tmp/ipkg-B3FrEg http://ipkg.nslu2-linux.org/feeds/slugos-bag/native/3.10-beta/Packages.gz' 

[color:"red"] Host name lookup failure [/color]
dus de oude waarden voor de dns en gateway zijn weg?

hoe die per telnet er weer inzetten?

cheers

[Tonskidutch]

aha, natuurlijk de resolve.conf aanpassen

cd ..

cd etc

vi resolv.conf

 

nameserver 10.0.0.138 (of de router van jouw)

 

cheers

[dark-angel-djin]

ja hier ook foutmeldingen en weet niet waar het aan ligt miss dat ik hier ook een antwoord op kan krijgen ??

 

 

de foutmeldingen luiden

ipkg_download: ERROR: Command failed with return value 127: `wget --passive-ftp -q -P /tmp/ipkg-NSa3Vq http://ipkg.nslu2-linux.org/feeds/unslung/native/Packages.gz'

#

[Tonskidutch]

Citaat:

aha, natuurlijk de resolve.conf aanpassen
cd ..
cd etc
vi resolv.conf

nameserver 10.0.0.138 (of de router van jouw)

cheers

dat was dus de oplossing
ssh naar de NSLU met putty
ga naar de map /etc
wijzig de resolv.conf middels de editor VI
bijvoorbeeld:

Code:

 nameserver 10.0.0.138nameserver 194.109.104.104nameserver 194.109.6.66~~"resolv.conf" line 1 of 3 --33%-- 

cheers