SS2diseqc configureren

[Gast]

ik heb eens gezien hoe je de plugin SS2diseqc kan configureren voor ss2 kaart (en dvb dream)maar ben het kwijt iemand een link

 

ribbetje

[Skysurfer]

Gewoon de SS2Diseqc.exe en -.dll naar de rootdirectory van je viewer kopiëren.

[Gast]

dat werkt en kan hem opstarten maar hoe moet je hem configureren als je op een zender tikt dat hij automatisch naar de satteliet gaat

[Skysurfer]

Lees dit eens door(is wel engels):

 

DiSEqC 1.2 for SkyStar2 v1.6

----------------------------

 

Instructions:

-------------

 

- Copy SS2DiSEqC.exe, SS2DiSEqC.dll & directory Satellites to directory ProgDVB or/and MyTheatre\Plugins

- Run your ProgDVB (MyTheatre) and tune any channel on your favourite satellite

- Select plugin SS2DiSEqC->Configure (you can Drag&Drop directory Transponders to SS2DiSEqC main window in ProgDVB)

- Set your correct Longitude,Latitude and H-H Motor Type, Range and Goto x.x° support etc.

 

H-H Motor with support Goto x.x°

--------------------------------

- Press 'Auto Goto x.x°', theoretical positions are computed for all satellites

- Try 'Goto x.x' East 10°, if doesn't work East driving change 'East Fix' and repeat attempt

- Select your tuned satellite in list and press 'Send', motor is driving

- If no signal ocurres use 'Goto x.x°' button with some increments (some functional channel have to be tuned in ProgDVB, MyTheatre)

- For getting maximal signal press 'Max signal' and modify position

- Press 'Auto Goto x.x°' again and use current satellite as referential, all satellite positions are corrected

- Select other satellite in SS2DiSEqC and press 'Send', motor is driving to new position

- Try 'Max Signal' with finding the strongest transponder, if new position are different save it

- Repeat this two steps for any satellite and fine tune right position

- Close SS2DiSEqC

- Now if you select new channel from other satellite, H-H motor is driving

 

H-H Motor without support Goto x.x°

-----------------------------------

- Select your tuned satellite in list

- Press 'Drive motor East/West' witk step eg. 10° and try find the signal (some functional channel have to be tuned in ProgDVB, MyTheatre)

- For getting maximal signal press 'Max signal'

- Use 'Store nn' with ascending counter for saving to the motor's memory

- Use 'Goto nn' with current position and press 'Modify'

- Repeat this steps for all satellites until motor's memory isn't full

- Close SS2DiSEqC

- Now if you select new channel from other satellite, H-H motor is driving

 

 

How to install the H-H motor correctly:

---------------------------------------

1. Make sure that mounting pole is exactly vertical to the Earth before installation.

2. Fix H-H motor onto the mounting pole and attach Antenna dish to the motor (drive motor to 0 position before instalation, dish has to be at the center

of mounting tube).

3. Rotate the motor together with antenna toward TRUE SOUTH (you can use time from SS2DiSEqC 'True South' and Sun's shadow for right setting).

4. Set Elevation Angle of the motor (use 'Elevation' from Cofiguration)

5. Set Angle of the Dish (use 'Declination' from Cofiguration). See motor documentation.

6. Use SS2DiSEqC and DVB Prog to drive motor to satellite nearest South.

7. If no signal, rotate the motor together with antenna for fine settings.

 

------------------

[Gast]

bedankt heb het geprobeerd en het werkt perfect

[Skysurfer]

Ok, veel plezier ermee. <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" />

 

Skysurfer