NEUMO 2.13.6 released!

[Gast]

NEUMO 400s 2.13.6 images is vrij voor download.

 

Thanks in the first place to Deeptho & Pepijn for all the time that they

have worked this summer to further improve the Neumo 400s image!

Thanks also to some of our beta testers, and to the people from DGStation

for supporting us.

 

Download PAL & NTSC images:

http://my.opera.com/neumoteam

 

PAL image ook via net-update:

http://update.neumoteam.org/netupg

 

 

 

Code:

 Neumo-2.13.6_ReleaseNotes:-------------------------I: new feature or improvementB: bug fixN: NoteTuner support---------------I: Relook now supports new tuner introduced in recent models.Mpeg program stream playback----------------------------I: Relook can now play back recordings in mpeg program stream format   (usually stored in files with .mpg extension). Simply copy the files   to /var/media/video. Trick play (fast forward, rewind, ...) is   currently not implemented. Power on/off-------------I: Improved power button functionality. The button now switches   between two states, which have the meaning ON="user wants to watch   live" and OFF="user does not want to watch live". This is different   from the previous meaning "user wants to turn on/off relook".   The difference becomes important when a recording is in   progress. In the old code, pressing the power button would pop up   the question if the user would like to cancel the recording. In the   new code, this question is not asked, the recording is continued,   but picture output through scart and RF is disabled. Relook will   switch off AFTER the recording, unless the user presses the power   button once more. In this case, picture output on scart and RF is   re-enabled and relook will NOT switch off after recording.I: The preceding explanation actually applies to the case where the   recording started when the user was already watching some program,   i.e., after the user pressed the power button.    In case a recording starts when relook is off (in cold or warm   sleep), relook will switch in but no picture will be shown through   the scart and RF outputs, until the user presses the power button.        If the the user state is ON, relook will never switch off when a   recording ends. N: The easiest way to understand what will happen when pressing the   power button is to pretend that relook contains two devices: a TV tuner,   which is controlled by the power button and a recorder, which is   controlled by a timer. The power button switches the TV tuner on   or off. Relook is turned on when either the recorder or the TV   tuner needs to be on. It is turned off when both the TV tuner and the   recorder are off.N: Picture output though scart and RF is temporarily turned on during    cold boot. This is a limitation of the current code.User preferences----------------I: Previously, the relook code had three different methods for storing   user options leading to complicated and error-prone code. Almost   all user settings are now stored in the table "options" in the   database, except those that are needed in /bin/init, which are   stored in the filesystem.N: Because of the new options-code, many existing user settings will be   lost when upgrading to neumoteam 2.13.6. Therefore, users should    carefully check all settings in the menus, because many options   will be set to their default value after upgrade.   N: Because of the new option codes, plugins accessing old options   will cease to function. Some minor code changes and recompilation   are needed to make them function again. The standard plugins   (ts_rec, mp3, sudoku, ...) and some others (spectrum analyzer)    have been fixed.      Users should not expect plugins compiled for other images or other    neumoteam versions to work on neumoteam 2.13.6. Some combinations will   work, but not all. This is nothing new: plugins have always been   specific to the image for which they are compiled, but this time   more plugins are affected.N: Your version of pc-editor must be recent enough to support the   database version 1.20. B: 12/24 hours option not stored correctly.Language selection---------------------I: New language preference and audio switching code. Instead of   selecting one default audio language, the user can now enter a list    of up to 7 preferred languages. The first language will be   selected if it is available, otherwise the second and so on. In   addition to the usual languages, a number of special languages are   available: "German 2" is the second German language choice on   premiere, which is typically English in reality. "Secondary" is the   second language on some digital+ channels. The special languages are   needed because the providers do not transmit the correct languages.I: The new "prefer Dolby AC3" option is interpreted as follows: if it   is set to "No" all AC3 streams will be ignored. If set to "Yes",   AC3 audio will be used, except if another non-AC3 audio language    with higher preference is available. N: The audio language preference also applies to teletext and   subtitles, but due to lack of suitable test cases, it has not been   tested.N: The current audio language is recomputed after each channel change    or when the transmitted PMT-table changes. After a PMT-change it   can take up to 30s before the language switch occurs.	   B: Incorrect audio switching when audio pids change.Pixellation-----------N: Pixellation is still not completely fixed. One remaining source of   pixellation is in the remuxer. In 2.13.5 this was minimised by   increasing the clock speed of the on-board FPGA. As a result some    hardware cams cease to function correctly. Also, the solution does    not eliminate all data corruption. I: The data corruption is usually triggered by the epg code switching to   certain transponders (but is not cause by the epg code!) and   registering SI-tables on those transponders. The time during which   SI-tables are registered is now minimized, so that the possibility   of pixellation is limited. Start up and shutdown--------------------I: Picture on scart and RF is now switched off much sooner after    the user presses the power button. The user can watch regular tv,   while relook is still shutting down.B: Sporadic kernel crash after warm boot.B: /bin/relook crashes on exit. As a result, all kinds of strange   things could happen (such as entering a cold shutdown instead of a   warm shutdown, starting a needless factory reset, ...I: Epg code now exits gracefully at shutdown, reducing the likelihood   of database corruption.B: Database revision checking scripts fail in the case of a    missing database: when /var/data/dbepg.dat is missing the upgrade   script creates an empty dbepg.dat rather than copying a clean   one. Next it starts the database upgrade script, which fails   because of the empty database. The same problem occurs for a   missing db.dat/ B: Relook crashes when an empty /var/data/db.dat is installed.B: Shut down in menu->usb-mode->pc-editor makes relook crashStability fixes---------------B: Relook crashes after pressing the info button twice in file list   management screen. B: Relook crashes after running for many hours.B: Upgrade to sqlite3.4.1 to fix a database corruption bug.I: Implemented code to suspend epg parsing when memory gets too full.B: Fix epg code becomes inactive for a long time if transponder   doesn't transmit tdt table.B: Memory leak in epg code. B: Fixed minor memory leak in new mhwepg2 code.I: Improved enforcement of memory limits in dvbepg code.B: Relook crashes while exiting automatic channel search.B: Relook crashes in channel search.B: Memory leaks in channel epg.B: Various memory leaks.Speed and resource usage improvements--------------------------------------I: Improved channel changing speed. Channel changing was slowed down    by saving history information, which can take a very long time when   the database is locked for some reason. Other speed improvements have   been made as well.I: Improved performance of Channel List with EPG Program Name display.I: Faster channel epg by avoiding duplicate database look-ups and by   retrieving only the data that can fit on the screen.I: Much faster epg code due to improved database calls (50-75% faster)   and by reducing deliberate delays in the epg write code. The size    of the epg write queue has also been decreased which should lower   memory fragmentation.Other bug fixes and improvements---------------------------------I: The option "Use free tuner if scrambled" has been replaced by    "Dual descrambling." If the option is set to "Yes" relook will   allow recording/watching two encrypted channels. Otherwise, when a   user is watching a scrambled channel and a recording would start on   another scrambled channel, relook will ask to tune the live tuner    to the channel which is to be recorded.    This option is needed for some CAMs which can only descramble a   single channel. B: When "Use free tuner if scrambled" is "NO" (i.e., when  "Dual   Descrambling"="YES") relook sometimes asks to switch the live tuner   to the channel to be recorded, thus ignoring the user setting.B: In /bin/init the code that converts the file system from ext2 to   ext3 and the code that forces a full file system check was   accidentally disabled. B: The "record end offset: was ignored when recording from live mode.B: Relook failed to switch to regional programming.B: Wrong time in epg display and on front panel after changing   the timezone from within relook GUI.I: A new option "Banner auto display" controls whether or not the live   banner appears on screen after a channel change (or when the   broadcast PMT changes). This option does NOT affect banner display   when pressing trick play keys (e.g., fast forward) because visual   feedback is essential for features like fast forward.B: The "stop recording" dialog shows wrong program name.B: The svn revision number in "compile info" was wrong: it showed the     version of the "relook_src" directory, but now it show the version   of the most recent source file in that directory.B: A newly selected banner type only became active after reboot.B: The epg code crashed during certain operations, such as when running   plugins. The real fix is to stop the epg code altogether in these cases,	   but until that is implemented, a workaround has now been   implemented that should prevent all or some of the crashes.B: Cosmetic fixes in channel epg: long channel names overlapped with the   date-time field. Event names sometimes extend into the thumb nail window.   Notes for developers--------------------N: In the database, the audio language preference is stored as a   string of the form "eng;ger;ger1;fre". A number behind the   language is used to refer to a specific audio channel if there is   more than one channel with the given language. For instance the   first German audio stream on premiere is "ger". The second "German"   stream is "ger1" and so on.N: Before 2.13.6, options were stored in three database tables:   UserOption, options, optionInfo. The code for saving/loading the    options was duplicated all over the place; it dealt poorly with   database inconsistencies or non-existing options, creating the   potential for crashes.   The new option system stores (almost) all options in the table   "options" as two strings: a name of a variable and its value. There   are four different types of options: INT, STRING, CHOICE and   FSFLAG. The options are defined in dbmgr/db_options.in, which is   converted by a script to include/db_options_generated.h.   INT(i1,3) means: i1 is an integer, with default value 3    STRING(str1,"zorro"): str1 is string with default value "zorro"   CHOICE(c1,yes,yes,no): c1 is an integer which can assume the values    key_yes and key_no. The default value is key_yes (2nd argument).    FSFLAG(hdd_check,"/var/.chfs",off): the hdd_check option is on if   the file /var/.chfs exists. Otherwise it is off.   In c-code, db_options.h should be included. This will define   keys (e.g., key_yes and key_no) as numeric constants. All options   are retrieved from the database using the function db_option_init.   Individual options can be stored in or retrieved from the database   using options_set and option_get:   -to save an option to the database, use option_set(db,&options.str1)   -to load an option from the database, use option_get(db,&options.str1)   The value of an option can be accessed or changed by   reading/setting a variable like options.c1.val. The name of an   option can be found using a call like key_name(options.c1.val). In   the case of a CHOICE option, there are also facilities for   retrieving the allowed values for the option as a vector of integers.   In case the options table in the database contains variable names which are   not declared in db_options.in, they are simply ignored. Such values   are currently used to lock favorite lists. 

Feedback altijd welkom! <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" />

__________

relooker

[robbedoeske]

Ik zie niets over de lipsync?

[JaxcC]

Citaat:

Ik zie niets over de lipsync?

Dat is in de Neumo 2.13.5 al opgelost <img src="/forums/images/graemlins/wink.gif" alt="" /> Als je er alsnog last van hebt, laat dan even weten hoe je lipsync voor elkaar krijgt!!

JaxcC

[ArsLP]

Doet de CCcam 2.0.3 het ook in deze image.

2de tuner....?? <img src="/forums/images/graemlins/confused.gif" alt="" />

[robbedoeske]

Het is neumo,daarin werkt de 2e tuner altijd:)

[JaxcC]

Citaat:

Doet de CCcam 2.0.3 het ook in deze image.
2de tuner....?? <img src="/forums/images/graemlins/confused.gif" alt="" />

CCam 2.0 geen probleem, 2.0.3 geeft volgens mij hickups, twintuner support <img src="/forums/images/graemlins/xyxthumbs.gif" alt="" />

grtz

JaxcC

[p2040]

Welke emu's zitten er in..??

 

vg

p2040

[wian]

Standaard geen emu's in dit image.

 

Heb hem hier draaien en er handmatig CCcam ingezet. Nieuwe versie's werken niet goed, na 15 seconden bevriest het beeld. Versie 1.7 werkt wel.

 

Lipsync problemen zijn er wel, maar vallen mee. Alleen als je uit een menu komt is het vaak mis. Als je dan een beetje heen-en-weer zapt gaat het weer goed. Toen ik net een tijdje zapte (zonder menu) ging het goed.

[Gast]

Hebben jullie met CCcam wel beeld op de Nederlandse kanalen?

Ik heb overal beeld behalve op de nederlandse kanalen en dat met een officieel abbonement.

Met Fantacy 2.16a nooit geen probleem gehad.

 

Grtz

[Gast]

Is er iemand die mijn probleem kan oplossen.

Ik heb nml. het nieuwe image geinstalleerd, incl emu's. Maar sindsdien heb ik na ongeveer 15 sec. dat mijn beeld blijft stilstaan. Zap ik naar een ander kanaal dan is het voor 15 sec weer ok, daarna weer stilstaand beeld.

Alleen bij BVN blijft het beeld doorlopen, echter wel met haperingen.

Ik heb zowel CCCam 2.0 als 1.7.1 als 1.7.0 geprobeerd en ook image 2.315 geprobeerd. Alles blijft gelijk.

Wie weet raad.

[Gast]

Zojuist CCcam 1.7.0 geinstalleerd en het probleem is opgelost.

[Gast]

Je kan ook v2.0.0 gebruiken, echter dien je dan in de config de DVD API op 1 in te stellen. Werkt bij mij perfect <img src="/forums/images/graemlins/wink.gif" alt="" />

[JaxcC]

Dag mensen,

 

Hierbij een handleiding om in deze image emu's toe te voegen, de benodigde bestanden heb ik ivm grootte van het bestand moeten verweideren, stuur een pm met je Email dan zal ik ze je toesturen.

 

cheers

 

JaxcC

[Gast]

Ik heb de complete handleiding incl files gemaakt door Jaxc voor je geplaatst op mijn server.

 

Link: http://relook.3pinter.nl/manuals/nemu%20for%20dummies.rar

 

Met dank aan Jaxc en have fun <img src="/forums/images/graemlins/wink.gif" alt="" />

[Gast]

Het is inderdaad een mooie image, heb hem vandaag eens aan mijn PC gehangen en via USB geflashed. Alles werkt perfect met behulp van de uitleg van JaxcC.

Iemand al ervaring met die Internet EPG ?