[Strong] strong de geest gegeven?

[Gast]

ik wou v 20 in mijn strong laden waar v15 in zit <BR>alles ging goed tot ik hem weer aansloot aan uit aan uit weer een patch erover da3net3spok toen ppvda3ned3 geprobeerd weer aan en weer uit allen zonder kaart bleef hij aan weer weer een ander programma da3ned3channels en toen had ik geen display meer alles zwart allen met de pc communiceerd hij nog denk ik <BR>wat nu ik zit met mijn handen in het haar ik ben al uren aan het neuzen john@xs4all.nl

[Gast]

gewoon opnieuw de file laden en de stekker uit de stopkontact trekken daarna afsluiten van de computer en de stekker weer in het stopcontact.Als je via de aan/uit knop werkt,wil het niet.Heb ik ook al meerdere problemen mee gehad.<BR>grtz hendrik b

[Gast]

hij reageert nu ook al niet meer ok de pc

[Gast]

Solution 1:<BR>It verifies that your terminal gives life signs, that is to say, test if connecting it to the PC and forming port COM, when igniting it, loader it detects that deco exists. It will have to put something in the inferior window, although it is only a rare sign. The important thing is that intercommunication exists.<BR>If you have been able to put it in way CHA (although you do not see it in display because it is in black), test to introduce firmware again. It can that way CHA is only put if it detects some error in firmware, so you do not worry if you do not see display. If the new load is made correctly, your deco will return to normality and will return to illuminate display.<BR>If this has not worked it follows with the following thing:<BR> <BR>Solution 2:<BR>We continued supposing that something of intercommunication between deco exists and PC has perhaps not let to us load firmware, can that deco continues waiting for data. First of all we must say to the Strong that lets hope. This becomes of the following form:<BR>1. - Pon in march the Strong (non-modal CHA).<BR>2. - It executes the Loader2000 and it chooses the COM to which it is connected.<BR>3. - In the window of down always in small letters and without comiles it presses:<BR> " h " leaves something?<BR> " control + c " several times leaves something?<BR> " g " ignites display?<BR>4. - If it is not thus it ignites the Strong putting it in way CHA and returns to try to load firmware again.<BR>If this to continued either does not happen to the following solution:<BR> <BR>Solution 3:<BR>In some cases the previous thing is not sufficient. Then we must act as it is indicated:<BR>1 Abre the hyperterminal and configuralo ( you know to form it? )<BR>2 Enciende the terminal.<BR>3 Pulsa a key <BR>4 Aparecerá something like: " Acces Code? " (password is requesting you to enter UNDER)<BR>5 Quickly you key in " cafe " (without the comiles)<BR>6 If it has not given time you and it leaves " aim acces code? ", it returns to point 3.<BR>7 Already you are in UNDER<BR>8 Pulsa " c " and the Rx will be hoping that him loadings a file.<BR>9 Cierra the hyperterminal.<BR>10- Abre loader, forms the COM and selects the file that you want to send.<BR>11- Pulsa Start<BR>When doing this, will load new firmware, but it is possible that it follows without igniting display. As soon as loadings firmware and you reinitiate the terminal (to pay and to ignite with the button of the frontal) would be due to ignite.