Smartreader+ een goede uitleg

3 februari 2008

heeft er iemand een goede uitleg om deze Smartreader+ aan het werken te krijgen met newcs op een smeserver met een seca c+kaart

8 februari 2008

dit is mijn reader in newcs 1.20 ik krijg de kaart niet werkend iemand een idee

hij geeft aan dat er geen kaart in zit maar de chip wijst naar boven (ik zie de led kniperen)

|----------|------|---------|----------|-----|-----|---------|

| Empty | 0000 | Yes | Yes | 357 | No | 0 |

Ecms | Node | Reader

0 | /dev/ttyUSB0 smartreader+ | 0 (phoenix)

en dit is mijn newcs log

level: normal

type: init

output: all

logger config: level 1 type 3 output 255

Console log options: level 1 type 3

log file:

logger: cant open file , file log disabled

udp log: host 192.168.1.79 port 1000

UDP log options: level 1 type 3

tcp port: 3001

TCP log options: level 1 type 3

[ 17:00:59 ] [ Box detect ] Box type 1

[ 17:00:59 ] [ Config ] Option <Seca-PPV> for device 0 (phoenix) not present, defaulting to NO

[ 17:00:59 ] [ Config ] Value in <boxkey> for device 0 (phoenix) is INVALID, skipping...

[ 17:00:59 ] [ Config ] /dev/ttyUSB0 smartreader+ ECM priority: round

[ 17:00:59 ] [ Config ] Option <spider> not present for User: card02, defaulting to NO

[ 17:00:59 ] [ EMM Cache ] Initialising Cache with 20 entries

[ 17:00:59 ] [ ECM Cache ] Initialising dynamic Cache

[ NewCS ] Process ID is: 4744

[ 17:00:59 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0 smartreader+

[ 17:00:59 ] [ Phoenix ] Opening device /dev/ttyUSB0 smartreader+

[ 17:00:59 ] [ Phoenix ] Could not get device /dev/ttyUSB0 smartreader+

[ 17:00:59 ] [ Loader ] Reset failed ...

[ 17:00:59 ] [ Loader ] Starting Newcamd Server on port 10110

[ 17:00:59 ] [ NewCS ] Ready to GO!

[root@csserver csserver]#

10 februari 2008

en dit zijn de instellingen van de smartreader

Mode = Autoswitch

Kernel = Normal

T-mode = T = 0

EGT = 0

10 februari 2008

en de instellingen van newcs xml en de log

als ik het goed zie ziet newcs wel de smartreader maar de c+ kaart niet

<?xml version="1.0"?>

<!--

For setup-issues, look in readme.txt!

If there are other troubles, try different forums or irc channels around )

-->

<name>phoenix</name>

<type>Phoenix</type>

<node>/dev/ttyUSB0</node>

<reset>normaal</reset>

<crypto-special>no</crypto-special>

<newcamd_port>10110</newcamd_port>

<priority>round</priority>

<sid>

<allow>

<!-- valid value for id are:

4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->

</allow>

<deny>

<!-- valid value for id are:

4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->

</deny>

</sid>

</device>

</readers>

<!-- valid value for enable are:

0,1 - Enable or Disable radegast server. -->

<!-- valid value for port are:

0,65535 - Which port to listen for incomming connections. -->

<!-- valid value for allow are:

ALL - Not active yet. -->

<allow>

</allow>

</radegastserver>

<cache>

</cache>

<debug>

<password>xxxxxx</password>

<level>normal</level>

<console_options></console_options>

<file_options></file_options>

<udp_host>192.168.1.79</udp_host>

<udp_port>1000</udp_port>

<udp_options></udp_options>

<tcp_port>3001</tcp_port>

<tcp_options></tcp_options>

</debug>

<name>csserver</name>

<user>

</user>

<user>

</user>

</newcamdserver>

</newCSconfig>

en de newcs opstart file

level: normal

type: init

output: all

logger config: level 1 type 3 output 255

Console log options: level 1 type 3

log file:

logger: cant open file , file log disabled

udp log: host 192.168.1.79 port 1000

UDP log options: level 1 type 3

tcp port: 3001

TCP log options: level 1 type 3

[ 16:14:52 ] [ Box detect ] Box type 1

[ 16:14:52 ] [ Config ] Option <Seca-PPV> for device 0 (phoenix) not present, defaulting to NO

[ 16:14:52 ] [ Config ] Value in <boxkey> for device 0 (phoenix) is INVALID, skipping...

[ 16:14:52 ] [ Config ] /dev/ttyUSB0 ECM priority: round

[ 16:14:52 ] [ Config ] Option <spider> not present for User: card02, defaulting to NO

[ 16:14:52 ] [ EMM Cache ] Initialising Cache with 20 entries

[ 16:14:52 ] [ ECM Cache ] Initialising dynamic Cache

[ NewCS ] Process ID is: 4840

[ 16:14:52 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 16:14:52 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 16:14:52 ] [ Phoenix ] Setting Parity to: EVEN

[ 16:14:52 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 16:14:52 ] [ Phoenix ] Setting Baud to standard 9600

[ 16:14:52 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 16:14:54 ] [ Loader ] Reset failed ...

[ 16:14:54 ] [ Loader ] Starting Newcamd Server on port 10110

[ 16:14:54 ] [ NewCS ] Ready to GO!

[root@csserver csserver]#

12 februari 2008

niemand een idee om mij verder te helpen

13 februari 2008

geef even 2 outputs van de pc

Code:

uname -r

en als je de reader er in steekt

Code:

dmesg

13 februari 2008

Origineel bericht van: radxnl

geef even 2 outputs van de pc

Code:

uname -r

en als je de reader er in steekt

Code:

dmesg

de log en wat exta logs lspci en lsusb

Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel® Pentium® 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs... it is
Freeing initrd memory: 1313k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.20 entry at 0xeca9c, last bus=5
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
Linux Plug and Play Support v0.97 © Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 201
ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 209
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1202900879.782:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 44B1A32F6F8789E2
- User ID: CentOS (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 © Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Maximum main memory to use for agp memory: 431M
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x24a0-0x24a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x24a8-0x24af, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD100BA, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Optiarc DVD RW AD-7170A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 19541088 sectors (10005 MB) w/2048KiB Cache, CHS=19386/16/63, UDMA(66)
hda: cache flushes not supported
hda: hda1 hda2
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0 HUB COM1 COM2 USB1 USB2 USB3 EUSB PBTN
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 172k freed
SCSI subsystem initialized
libata version 2.00 loaded.
device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
md: raid1 personality registered as nr 3
md: md1 stopped.
md: bind<hda1>
raid1: raid set md1 active with 1 out of 2 mirrors
md: md2 stopped.
md: bind<hda2>
raid1: raid set md2 active with 1 out of 2 mirrors
cdrom: open failed.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: dm-0: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 1044262
EXT3-fs: dm-0: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
inserting floppy driver for 2.6.9-67.0.1.EL
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Ethernet Channel Bonding Driver: v2.6.3-rh (June 8, 2005)
bonding: MII link monitoring set to 200 ms
divert: allocating divert_blk for bond0
e100: Intel® PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright© 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 209
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xfc500000, irq 209, MAC addr 00:08:02:E2:E9:2E
ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50044 usecs
intel8x0: clocking to 48000
hw_random: RNG not detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 185, pci mem e0146000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 169, io base 00002440
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 177, io base 00002460
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: could not bd_claim hda1.
md: could not bd_claim hda2.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
usb 3-1: new full speed USB device using address 2
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI SIO
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI 8U232AM Compatible
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT232BM Compatible
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT2232C Compatible
drivers/usb/serial/usb-serial.c: USB Serial support registered for USB-UIRT Infr ared Tranceiver
drivers/usb/serial/usb-serial.c: USB Serial support registered for Home-Electron ics TIRA-1 IR Transceiver
ftdi_sio 3-1:1.0: FTDI FT232BM Compatible converter detected
usb 3-1: FTDI FT232BM Compatible converter now attached to ttyUSB0
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.1:USB FTDI Serial Converters Driver
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1015800k swap on /dev/main/swap. Priority:-1 extents:1
divert: freeing divert_blk for eth0
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: CPU0 updated from revision 0x33 to 0x37, date = 06042003
IA-32 Microcode Update Driver v1.14 unregistered
ip_tables: © 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4031 buckets, 32248 max) - 356 bytes per conntrack
e100: Intel® PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright© 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 209
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xfc500000, irq 209, MAC addr 00:08:02:E2:E9:2E
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 5

[root@csserver ~]# uname -r
2.6.9-67.0.1.EL

[root@csserver ~]# lsusb
Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232R USB-Serial (UART) IC
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

[root@csserver ~]# lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
05:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VM (LOM) Ethernet Controller (rev 81)

[root@csserver ~]#

level: normal
type: init
output: all
logger config: level 1 type 3 output 255
Console log options: level 1 type 3
log file:
logger: cant open file , file log disabled
udp log: host 192.168.1.79 port 1000
UDP log options: level 1 type 3
tcp port: 3001
TCP log options: level 1 type 3
[ 12:15:33 ] [ Box detect ] Box type 1
[ 12:15:33 ] [ Config ] Option <Seca-PPV> for device 0 (phoenix) not present, defaulting to NO
[ 12:15:33 ] [ Config ] Value in <boxkey> for device 0 (phoenix) is INVALID, skipping...
[ 12:15:33 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 12:15:33 ] [ Config ] Option <spider> not present for User: card02, defaulting to NO
[ 12:15:33 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 12:15:33 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 4410
[ 12:15:33 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 12:15:33 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 12:15:33 ] [ Phoenix ] Setting Parity to: EVEN
[ 12:15:33 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 12:15:33 ] [ Phoenix ] Setting Baud to standard 9600
[ 12:15:34 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 12:15:35 ] [ Loader ] Reset failed ...
[ 12:15:35 ] [ Loader ] Starting Newcamd Server on port 10110
[ 12:15:35 ] [ NewCS ] Ready to GO!

[root@csserver csserver]#

<?xml version="1.0"?>
<!--

For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around

)

-->

<newCSconfig>

<readers name="Card Readers">
<device>
<name>phoenix</name>
<type>Phoenix</type>
<node>/dev/ttyUSB0</node>
<mhz>357</mhz> 
<parity>even</parity>
<reset>normaal</reset>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>10110</newcamd_port>
<priority>round</priority> 
<sid>
<allow>

<id></id>
</allow>
<deny>

<id></id>
</deny>
</sid>
</device>

</readers>

<radegastserver>

<enabled>no</enabled>


<port>10001</port>


<allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password>xxxxxx</password>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.79</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>csserver</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>
<user>
<name>card02</name>
<password>card02</password>
<au>on</au>
</user>
<user>
<name>card03</name>
<password>card03</password>
<spider>off</spider>
<sidoverride>on</sidoverride>
<au>off</au>
</user>
</newcamdserver>
</newCSconfig>

en de instellingen van de smartreader

Mode = Autoswitch
Kernel = Normal
T-mode = T = 0
EGT = 0

ben benieuwd wat er niet klopt

14 februari 2008

zet de reader eens op "dreambox" stand

14 februari 2008

Origineel bericht van: radxnl

zet de reader eens op "dreambox" stand

hetzelfde probleem zal eens een andere newcs proberen

15 februari 2008

Heb de smartreader geupdate naar 1.03?

16 februari 2008

Origineel bericht van: Sheik Yerbouti

Heb de smartreader geupdate naar 1.03?

ja op 1.03 (stond er al op)

16 februari 2008

Jammer! Ik had ook heel veel problemen met de smartreader+ (onder Windows) en kwam er na enige tijd achter dat ik er een had ontvangen met versie 1.0. Na een update werkte alles zoals het hoort. Ik had gehoopt dat dit voor jou ook de oplossing zou zijn.

18 februari 2008

ik heb de smartreader`s getest onder xp met hyperterminal en putty wel connectie maar geen gegevens (het veld blijft leeg deze tip kwam van een ander forum)

dus ik denk dat de smartreaders kapot zijn ??????????????

zal ze eens omruilen

rai · 23 februari 2008

Gebruik eens de NEWCS 1.50. Dan zou het wel moetenwerken, maar stabiel is anders.

Ik heb het wel goed werken met CCCamd 2.05. Maar helaas kan ik dan 1 van m'n clients (SS2) niet meer connecten.

24 februari 2008

die heb ik ook al geprobeerd newcs 1.50

ben iets verder gekomen nog een fout gevonden ([ 16:23:07 ] [ Loader ] Card 0100 on port /dev/ttyUSB0 failed )

level: normal

<?xml version="1.0"?>

<!--

For setup-issues, look in readme.txt!

If there are other troubles, try different forums or irc channels around )

-->

<name>phoenix</name>

<type>Phoenix</type>

<node>/dev/ttyUSB0</node>

<reset>normaal</reset>

<crypto-special>no</crypto-special>

<newcamd_port>10110</newcamd_port>

<priority>round</priority>

<sid>

<allow>

<!-- valid value for id are:

4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->

</allow>

<deny>

<!-- valid value for id are:

4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->

</deny>

</sid>

</device>

</readers>

<!-- valid value for enable are:

0,1 - Enable or Disable radegast server. -->

<!-- valid value for port are:

0,65535 - Which port to listen for incomming connections. -->

<!-- valid value for allow are:

ALL - Not active yet. -->

<allow>

</allow>

</radegastserver>

<cache>

</cache>

<debug>

<password>xxxxxx</password>

<level>normal</level>

<console_options></console_options>

<file_options></file_options>

<udp_host>192.168.1.79</udp_host>

<udp_port>1000</udp_port>

<udp_options></udp_options>

<tcp_port>3001</tcp_port>

<tcp_options></tcp_options>

</debug>

<name>csserver</name>

<user>

</user>

<user>

</user>

</newcamdserver>

</newCSconfig>

type: init

output: all

logger config: level 1 type 3 output 255

Console log options: level 1 type 3

log file:

logger: cant open file , file log disabled

udp log: host 192.168.1.79 port 1000

UDP log options: level 1 type 3

tcp port: 3001

TCP log options: level 1 type 3

[ 16:23:05 ] [ Box detect ] Box type 1

[ 16:23:05 ] [ Config ] Option <Seca-PPV> for device 0 (phoenix) not present, defaulting to NO

[ 16:23:05 ] [ Config ] Value in <boxkey> for device 0 (phoenix) is INVALID, skipping...

[ 16:23:05 ] [ Config ] /dev/ttyUSB0 ECM priority: round

[ 16:23:05 ] [ Config ] Option <spider> not present for User: test1, defaulting to NO

[ 16:23:05 ] [ EMM Cache ] Initialising Cache with 20 entries

[ 16:23:05 ] [ ECM Cache ] Initialising dynamic Cache

[ NewCS ] Process ID is: 4946

[ 16:23:05 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 16:23:05 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 16:23:05 ] [ Phoenix ] Setting Parity to: NONE

[ 16:23:05 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 16:23:05 ] [ Phoenix ] Setting Baud to standard 9600

[ 16:23:05 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 16:23:07 ] [ ATR ] T=0 1etu=104.17us Guardtime:13etu WWT:144000etu

[ 16:23:07 ] [ ATR ] Historical bytes: p p 7 [0E] l [b6] [D6]

[ 16:23:07 ] [ Loader ] Init Seca card

[ 16:23:07 ] [ Phoenix ] Setting Parity to: EVEN

[ 16:23:07 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 16:23:07 ] [ Phoenix ] Setting Baud to standard 9600

[ 16:23:07 ] [ Keyman ] Adding key 1409XXXXX type 0 on Provider 000000 for caid 0100 ID=0

[ 16:23:07 ] [ Loader ] Card 0100 on port /dev/ttyUSB0 failed

[ 16:23:07 ] [ Loader ] Starting Newcamd Server on port 10110

[ 16:23:07 ] [ NewCS ] Ready to GO! \:\)

[root@csserver csserver]# [ 16:23:11 ] [ Newcamd:10110 ] User test1 logged in, client: CCcam

[ 16:23:11 ] [ Newcamd:10110 ] Connection from test1 to not-ready server!

[root@csserver csserver]# killall -9 newcs.i686

[root@csserver csserver]#

[root@csserver csserver]# lsusb

Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232R USB-Serial (UART) IC

Bus 003 Device 001: ID 0000:0000

Bus 002 Device 001: ID 0000:0000

Bus 001 Device 001: ID 0000:0000

[root@csserver csserver]#

usb 3-1: new full speed USB device using address 2

ACPI: Power Button (FF) [PWRF]

drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic

usbcore: registered new driver usbserial_generic

usbcore: registered new driver usbserial

drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0

drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI SIO

drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI 8U232AM Compatible

drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT232BM Compatible

drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT2232C Compatible

drivers/usb/serial/usb-serial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver

drivers/usb/serial/usb-serial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver

ftdi_sio 3-1:1.0: FTDI FT232BM Compatible converter detected

usb 3-1: FTDI FT232BM Compatible converter now attached to ttyUSB0

usbcore: registered new driver ftdi_sio

drivers/usb/serial/ftdi_sio.c: v1.4.1:USB FTDI Serial Converters Driver

en de instellingen van de smartreader

Mode = Autoswitch

Kernel = Normal

T-mode = T = 0

EGT = 0

Inloggen

Smartreader+ een goede uitleg

Aanbevolen berichten

Gast teo1966

Gast teo1966

Gast teo1966

Gast teo1966

Gast teo1966

Gast radxnl

Gast teo1966

Gast radxnl

Gast teo1966

Gast Sheik Yerbouti

Gast teo1966

Gast Sheik Yerbouti

Gast teo1966

rai

Gast teo1966

Maak een account aan of log in om te reageren

Account aanmaken

Inloggen

Wie is er online 0 leden

Overig

Activiteit