printer instaleren op window xp

[gerrit801]

bij printer toevoegen op xp geeft hij aan dat het bestand

hpvdj50.ini niet kan kopieren,printer is hp deskjet 710.

iemand oplossing

gerrit

[WPW]

Lekker duidelijk zo ja...

Hoe installeer je?

Vanaf waar komen de install bestanden?

Op welke moment komt er een foutmelding?

 

[gerrit801]

dit doe ik;start/de wizard printer toev./lokale printer/poort lpt1/hp 710/testpagina nee/voltooien.

en dan komt er, kan bestand niet kopieren kopieerfout.

C:\WINDOWS\Driver Cache\i386

gerrit

[WPW]

Het is helaas in het engels maar je moet geen plug&play gebruiken:

 

The following instructions are for installing the basic driver that is pre-loaded on Windows XP. This document describes how to load the appropriate printer driver that is pre-installed in your Windows XP operating system. The pre-installed Windows XP driver supports basic printing features.

This document only addresses the Windows XP operating system.

Step one: Check to see if the printer driver is already installed

To find out if printer is already installed, do the following:

 

1.

Click Start, and then click Control Panel.

2.

Click Printers and Other Hardware, and then click Printers and Faxes.

3.

Check to see if the name of your printer shows next to a printer icon.

*

If the printer is there, you are done. The best printer driver is already installed. Proceed to Step four : Set the HP Deskjet driver as the default driver.

*

If the printer is not there, proceed to Step two : Connect the cables.

 

Step two: Connect the cables

With the computer and printer on, connect the USB or parallel cable to the printer and the computer. One of two things could happen:

 

*

The driver automatically installs when the printer is connected to the computer. Several small dialogue boxes will appear showing the progress of the driver installation. When the installation is finished, a message displays stating that the printer is installed and ready to use. You are done. The best printer driver available for your printer is installed. Proceed to Step four: Set the HP Deskjet driver as the default driver.

*

If the Found New Hardware Wizard displays, click Cancel and proceed to Step three.

 

Step three: Manually install the printer driver

 

1.

Click Start and then click Control Panel.

2.

Click Printers and Other Hardware, and then click Printers and Faxes.

3.

In Printer Tasks, click Add a printer.

4.

Click Next.

5.

Select Local, then remove the check mark from Automatically detect and install my Plug and Play printer.

6.

Click Next.

7.

Select Port.

*

Parallel connection is usually LPT1.

*

USB connection is usually USB001.

8.

Click Next.

9.

Select HP from the Manufacturer list.

10.

Select the printer model from the printer list, and then click Next.

11.

Select Yes if this printer is the default printer, or select No if it is not.

12.

Click Next to continue.

13.

Select No to skip the test page, and then click Next.

14.

Click Finish to complete the installation.

NOTE: If prompted for a Windows disk in Step 12, do not use the disk that came with the printer, use the Windows XP disk or the recovery disk that came with the computer.

15.

If prompted for a Windows disk, insert the appropriate Windows or PC Recovery disk (not the disk that came with the printer) and follow the instructions on the screen. Once the driver has been installed, it will be listed in the Printers window ( Start, then Printers and Faxes).

 

Step four: Set the HP Deskjet driver as the default driver

Once you’ve installed the new HP driver, set it as the default printer.

 

1.

Click Start, and then click Control Panel.

2.

Click Printers and Other Hardware, and then click Printers and Faxes.

3.

Right-click the HP Deskjet driver then select Set as Default Printer.