Ga naar inhoud


Definitieve Maart software TF4000


Gast

Aanbevolen berichten

Op de Nederlandse Topfield site is de laatste nieuwe firmware te vinden voor de TF4000PVR.( 27 Maart)

 

Ben ik in ieder geval van dat beta startuplogo af <img border="0" title="" alt="[Knipoog]" src="images/icons/wink.gif" />

 

1. IRD status of Mar 27 2002 version

(1) system id : 206

(2) loader version : A3.06

(3) device version : v4.3.44

(4) application version : TF-JPC 4.57.22

(5) last update : Mar 27 2002

 

2. Improvements of this version

(1) Setting the bookmark at live of recording channel is available from this version.

The jump-to-bookmark problem while recording is also fixed.

(2) The EIT problem in the info box, e.g. the EIT of 3 hours ago reappears, is fixed.

The EIT text in the info box will be also updated while the info box is being displayed.

(3) AC3 problem is fixed.

(4) The function of TV/SAT key which is located between TV/Radio and FAV key is redefined.

In case of IRD only, it is TV/SAT as the previous version.

In case of VCR bypass, it is SAT/VCR.

(5) The searching with SMATV mode had a problem in the previous version. It is fixed.

(6) The front pannel will display "rECo" while recording a channel.

(7) The bookmark at recording will be available while playback next time.

(8) The number of timer slots for delayed recording is increased to 24.

It is almost maximum at this hardware version due to the limitation of flash memory.

Increasing it more than 24 needs the scarifice of some other resources.

(9) The problem of searching the Astra2(28.2 E) is fixed.

(10) There was a problem in storing the satellite indexes of Stab DiSEqC 1.2 motor. It is fixed.

It is caused by wrong database of satellite. To update it, you SHOULD do the factory setting.

If you don't watch the channels in Thor123, Turk1B neither Turk1C with Stab DiSEqC 1.2 motor,

you don't have to do factory setting.

(11) The problem so-called "Big File" is almost fixed. The slim function is removed.

(12) The position of playback/time-shifting progress bar will be downward as the info box moves upward

by adjusting Main menu -> System setting -> Info box position.

(13) Some satellite/TP database are updated, especially eurobird in Astra2.

You have to do factory setting to update it.

 

3. FAQ

(1) If the LNB-Settings are "Separated" and the TF is started with Tuner 2 active,

neither LNB-Power on Tuner 1 nor the 12V output are activated.

==> A. The LNB power of tuner 1 will be activated if you change the channel in tuner 1 or a delayed recording

of tuner 1 channel starts.

B. The 12V switch is only for tuner 1. You can't control it with tuner 2.

(2) The TV output mode (RGB/CVBS) is not saved if it is selected by TV/SAT key.

==> A. When you press the TV/SAT key, the system pulls down the Slow-Blanking and Fast-Blanking of scart.

So, the TV output mode goes to CVBS if the TV is on A/V mode.

The TV/SAT key function is just for switching the TV source temporarily and not saved after turn-off.

B. You can save the TV output mode at Main menu -> System setting -> A/V output setting -> Video output.

 

<small>[ 27-03-2002, 14:52: Bericht gewijzigd door: CUL8TER ]</small>

Link naar reactie
Delen op andere sites


Beta_TF4000PVR_Tfd_SYS_206_Mar25.zip versie gaf bij mij problemen met opnemen. Het beeld ging Stotteren en er was vervormd geluid.

Nu de officiele TF4000PVR-TOPFIELD-SYS 206-Mar27.tfd geinstalleerd.

Problemen met opname is weg maar soms loopt het geluid niet synchroon met het beeld. Even naar ander kanaal zappen en weer terug lost dat probleem op. Moet wel bekennen dat ik niet de factorysettings heb geactiveerd omdat ik bang ben al mijn satellietposities kwijt te raken.

 

Groeten Alan

 

Alan

 

<small>[ 27-03-2002, 23:20: Bericht gewijzigd door: alanS ]</small>

Link naar reactie
Delen op andere sites

Tja, daar zijn het beta's voor. Ik heb eens een ontvanger verkloot met een foute beta en omdat ik die van het net had geplukt werd die dus niet onder garantie gerepareerd <img border="0" title="" alt="[Frons]" src="images/icons/frown.gif" /> .

 

Wel logisch want die versies zijn niet publiek.

Nu ben ik beta tester en heb ik daar geen last meer van <img border="0" title="" alt="[Glimlach]" src="images/icons/smile.gif" />

 

Als je met STB manager eerst een kopie maakt van je huidige settings en die teruglaad na de reset moeten ze goed staan. Op Thor en Turksat na.

Daar zat een fout in de index database die nu is hersteld.

 

Maar ik kan me voorstellen dat je het zekere voor het onzekere neemt. Het storen van al die satellieten is geen pretje <img border="0" title="" alt="[Knipoog]" src="images/icons/wink.gif" />

Link naar reactie
Delen op andere sites

ik had met setedit een dump terug gezet na een upgrade, maar dan heeft het naar fabriek instellingen voor je sat lokatie's en freq ook geen zin <img border="0" title="" alt="[Frons]" src="images/icons/frown.gif" />

Link naar reactie
Delen op andere sites

Als je je settings saved op je pc en je motor staat op dat moment gericht op sirius moet je dan niet zorgen dat je motor weer op sirius staat als je de settings van je pc naar je Topfield gooit? De motor zal misschien alleen maar stapjes tellen. Of is dit onzin wat ik nu vraag?

 

Groeten Alan

Link naar reactie
Delen op andere sites

Gast
Dit topic is nu gesloten voor nieuwe reacties.
  • Wie is er online   0 leden

    • Er zijn geen geregistreerde gebruikers deze pagina aan het bekijken
×
×
  • Nieuwe aanmaken...