hemertje Geplaatst: 2 maart 2009 Geplaatst: 2 maart 2009 Origineel bericht van: Erik Slagter De dreambox kan geen AAC aan. Dit moet je dus veranderen in ac3 ("dolby digital"). hoi Erik, bedankt voor je bovengenoemde info! ik heb vorige week met deze instellingen een film opnieuw ge-encodeerd, dus ook met de eerder genoemde AAC geluidsinstellingen deze speelt mijn 8k box gewoon af via de optische toslink audiouitgang. in het audiomenu van de "MediaCenter Plugin" zie ik ook gewoon de AAC audiokeuze staan met de AC3 downmix op "Off". het programma geeft de opties weer: - MPEG-4 AVC format (audio uses Advanced Audio Coding, AAC) - ISO MPEG-4 format (audio uses Advanced Audio Coding, AAC) zitten daar nog verschillen in? DM8000 + DM800SE + VU+DUO + Wavefrontier T90 + 10LNBs Hemertje.Dreambox Webmaster Sat-nerds Moderator Plinux Member
Erik Slagter Geplaatst: 3 maart 2009 Geplaatst: 3 maart 2009 Origineel bericht van: hemertje Origineel bericht van: Erik Slagter De dreambox kan geen AAC aan. Dit moet je dus veranderen in ac3 ("dolby digital"). ik heb vorige week met deze instellingen een film opnieuw ge-encodeerd, dus ook met de eerder genoemde AAC geluidsinstellingen deze speelt mijn 8k box gewoon af via de optische toslink audiouitgang. in het audiomenu van de "MediaCenter Plugin" zie ik ook gewoon de AAC audiokeuze staan met de AC3 downmix op "Off". BTW als je een versterker / "mediacenter" hebt die AAC zelf kan decoderen dan werkt het misschien wel. Origineel bericht van: hemertje De dreambox kan geen AAC - MPEG-4 AVC format (audio uses Advanced Audio Coding, AAC) - ISO MPEG-4 format (audio uses Advanced Audio Coding, AAC) zitten daar nog verschillen in? Ow, goodie, de leuke kleine lettertjes van aac. Het zou om twee dingen kunnen gaan: er is een mpeg-2 "aac" standaard en een mpeg-4 "aac" standaard, ze zijn voor "lc" (low complexity) voor zover ik weet gelijk (mooi he...) en die wordt meestal gebruikt. Het probleem met aac is dat je nooit weet wat ze bedoelen, want het is een vergaarbak van allerlei methodes. Meestal bedoelt men volgens mij mpeg4-aac-lc of mpeg4-aac-he (high efficiency). Je ontkomt denk ik niet aan gewoon uitproberen. Als je aac in een mp4 container gaat stoppen kan dat ook weer op twee manier (zucht), het kan ook nog zijn dat ze dat bedoelen, maar daar heb je met je transport stream als het goed is geen last van. DM8000 + VU+Ultimo + GSO op Wavefrontier PLI Core Member www.openpli.org
MessiahOfHate Geplaatst: 3 maart 2009 Geplaatst: 3 maart 2009 Origineel bericht van: hemertje Origineel bericht van: MessiahOfHate Ik gebruik daarvoor TMPGenc Xpress, die weer gebruik maakt van de MainConcept H.264/AVC encoder. Prima resultaat en het is af te spelen op de Dreambox (DM800 in mijn geval). Er zijn volgens mij ook prima gratis alternatieven. welke instellingen gebruik je? ik heb de onderstaande gebruikt, maar misschien heb je betere ervaringen met een andere instelling?VIDEO video: mpeg-4 profile: baseline level: automatic aspect ratio: pixel 1:1 framerate: 23.976 P rate control mode: 1 pass constant bitrate av bitrate: 8.000 kb/s motion search range: 63 bitrate buffer: 0 - auto video system: automatic detect scene change: yesAVC: gop length: 33 reference frame count: 1 quantization: I 24, P25 entropy coding mode: CAVLC motion estimation subpel mode: quarter pixelAUDIO encode type: AAC sampling rate: 48.000 channel mode: stereo bitrate: 160kb/s mpeg version: mpeg-4 iso object type: low complexity output format: raw is er een instelling beschikbaar die het huidige videoformaat 1 op 1 overneemt en alleen maar converteert naar een andere gewenste codec? mpeg4-avc / h264 in dit geval alvast bedankt... De instellingen hebben natuurlijk direct invloed op de grootte van de output. Ik had nog de volgende opmerkingen op je instellingen: Gebruik de MPEG-4 AVC -Level automatic is standaard 4.1 -Aspect ratio: zet die op 4:3 of 16:9 als je DVD resolutie wilt behouden. -De framerate moet je hetzelde houden als je input signaal (doet Xpress standaard). -De rate control mode op 2 pass Variable Bitrate zetten (betere kwaliteit) -De audio bitrate zou ik wat hoger instellen bv 256
hemertje Geplaatst: 9 maart 2009 Geplaatst: 9 maart 2009 kwam deze tool tegen van het weekend heb hem zelf nog niet getest, maar ziet er wel veelbelovend uit... Citaat: AVCHDCoder Beta 3.08 released -------------------------------------------------------------------------------- Released a new version with some nice features Category: General Posted by: Twan After a couple of weeks without updates I finally released a new version today. It was time to add a Folder Output option. Even if it doesn't work like it should is not a big problem. Will be fixed soon. For me it was time to add more languages. Besides English I found someone who translated it into French. Also Dutch is added. Made that one myself ofcource. The authors of x264 made some great improvements. Pass 1 is about 40% faster at my pc. Really nice. AVCHDCoder is now more then 1 month in public and it is still in its early stage. There are very nice things to come. Like adding a menu and adding more movies on 1 disc. Multiple subtitles and maybe choosing thumbnales but I am not sure. Thanx for all faith you have, Twan Citaat: With AVCHDCoder you can convert M2TS and MKV files to AVCHD. Almost everything will be done for you. You can add srt or sup files. If they are in your input file or not it doesn't matter. Subs and audio will be extracted automaticly. Integrated the tool with some very rare formulas to calculate the bitrate. Discs will be filled for nearly 100%. I made it almost noob proof. In this Beta version is not everything possible. More will be added in the future. Based on free tools. Requires: Java, Avisynth, Ffdshow and Haali Media Splitter. Click here to go to the download section: Code: http://tools.twanwintjes.nl/index.php?page=downloads'>http://tools.twanwintjes.nl/index.php?page=downloads This is a list of things that are still unsupported: No AAC Only TrueHD, DTS-HD@3045Kbps, DTS, AC3 448Kbps and AC3 640Kbps are supported. No 2.0/7.1 sound. Only 5.1 channel audio supported. It's not possible to burn after conversion. Only 1 subtitle is supported. Only 1 audio track is supported. But the most will be done automaticly. Here is a list of awesome features: You don't need to convert a srt yourself. The only thing you do is adding your srt file and choose some settings. Internal srt and PGS sup files are supported. Conversion of audio will be done automaticly. Down/up covertion from AC3 to AC3. Down convertion of DTS-HD and True-HD tracks. Chapter support. You only need to choose your output resolution. Borders will be added automaticly. Downscaling will also be done automaticly. You can choose between DVD5 and DVD9 output. Feature to watch the approx. bitrate before encoding. Iso will created for you so it is ready to burn. No need to configure the x264 encoder. There is 1 build in profile that can't be edited. Muxing will be done automaticly. Unique formules to calculate the bitrate. In most cases the disc is filled for almost 100%. But I'll need your feedback to tweak it. This application uses the following applications: BePipe and aften ac3filter ImgBurn mkvMerge and mkvExtract tsMuxer x264 mediainfo The build in profile is delivered by: ps3avchd.net To run this application you need to have the following applications installed: AviSynth ffdshow Haali Media Splitter Java All needed applications can be found in the download section. Code: http://tools.twanwintjes.nl/ DM8000 + DM800SE + VU+DUO + Wavefrontier T90 + 10LNBs Hemertje.Dreambox Webmaster Sat-nerds Moderator Plinux Member
hemertje Geplaatst: 15 maart 2009 Geplaatst: 15 maart 2009 inmiddels gebruik ik deze naar volle tevredenheid en is voor verschillende platformen beschikbaar o.a. linux 64bit HandBrake 0.9.3 GPL-licensed, multiplatform, multithreaded video transcoder HandBrake is a GPL-licensed, multiplatform, multithreaded video transcoder. HandBrake is not a ripper. It converts video, it does not rip it byteby byte. It does not crack the latest DVD copy protection schemeshatched by the studios. It converts video from nearly any format to a handful of modern ones—that's it. Details HandBrake is an open-source, GPL-licensed, multiplatform,multithreaded video transcoder, available for MacOS X, Linux andWindows. Screenshots Supported sources: Any DVD-like source: VIDEO_TS folder, DVD image or real DVD(unencrypted--protection methods including CSS are not supportedinternally and must be handled externally with third-party software andlibraries), and some .VOB and .TS files Most any multimedia file it can get libavformat to read and libavcodec to decode. Outputs: File format: MP4, MKV, AVI or OGM Video: MPEG-4, H.264, or Theora (1 or 2 passes or constant quantizer/rate encoding) Audio: AAC, MP3, Vorbis or AC-3 pass-through (supports encoding of several audio tracks) Misc features: Chapter selection Basic subtitle support (burned into the picture) Integrated bitrate calculator Picture deinterlacing, cropping and scaling Grayscale encoding Credits HandBrake uses a lot of (L)GPL librairies from the Linux world: liba52 (AC3 decoding) libavcodec (decoding, picture cropping, scaling and deinterlacing, MPEG-4 encoding) libdvdread (DVD navigation) libfaac (AAC encoding) libmp3lame (MP3 encoding) libmp4v2 (MP4 muxing) libmpeg2 (MPEG-2 decoding) libogg (OGM muxing) libsamplerate (audio resampling) libvorbis (Vorbis encoding) libx264 (H264 encoding) libxvidcore (MPEG-4 encoding) Thank their authors! HandBrake 0.9.3: Released! "The trick is to combine your waking rational abilities with theinfinite possibilities of your dreams. Because, if you can do that, youcan do anything." Download it now. Sorry it's been so long, but we think you'll all agree this release of HandBrake was worth the wait. Where to begin? Universal input HandBrake is no longer limited to DVDs: it will now acceptpractically any type of video as a source. This massive enhancement wasachieved by tapping into the power of libavcodec and libavformat fromthe FFmpeg project. Linux GUI There is now an official GTK graphical interface for Linux,available as a binary for Ubuntu. This is the real deal, interactingdirectly with HandBrake's core library instead of just putting a prettyface on a command line interface. It has full feature parity with theMac interface. Video quality The x264 project has really come into its own this year, andHandBrake 0.9.3 integrates the latest improvements to the H.264encoding library. Picture quality has enhanced dramatically through theuse of psychovisual rate distortion and adaptive quantization, andthere have been significant speed optimizations. Audio flexibility HandBrake now offers total control over multiple audio tracks. No more internal DVD decryption Yeah, we know, no one reading this is going "Oh wow, no more DVD decryption--what a great new feature!" but...deal. HandBrake will dynamically load VLC's copy of libdvdcss if you haveit in your Applications folder in Mac OS X, and if you're on Linux, andyou want to live on the wild side, you can install libdvdcss on yoursystem and get the same effect. Translation of the last paragraph from nerdese: We're not about to stop you from choosing to decrypt DVDs. If you'reon a Mac, and you have VLC 0.9.x installed, you won't even notice theinternal capability's gone. If you're on Linux, all you have to do isinstall a library. Persistent queues When queueing up a bunch of videos to encode, you need no longerfear a crash in HandBrake's graphical interfaces. Queued jobs arecached to disk for safekeeping between sessions. New, better organized presets (Be sure to run "Update Built-In Presets" from the Presets menu!) The presets are now "nested" in folders and have evolved. Notably,there is a new Apple "Universal" preset, designed to play and look gooddoing so on anything from an iPod Nano to an AppleTV. There have been many changes to most of them. Please be aware thatmost presets now use different settings. This means most of them arenot suited for benchmarking 0.9.3 against 0.9.2. For example, theAppleTV preset is slower because it is now quality based, and producesmuch more efficient output. The Normal preset uses psychovisual ratedistortion. The High Profile presets use psychovisual trellising. Allof these setting changes can influence encoding time and output filesize. For comparison purposes, there are several presets in theApple->Legacy folder (the old iPod High-Rez, the old AppleTV, andthe old iPhone presets) which remain unchanged since 0.9.2. Audio-video synchronization HandBrake should now keep lip-synch as well as a DVD player can. Decomb filter HandBrake now offers a decomb filter, in the style of AviSynth's. Itis a deinterlacer that can be left on all the time without degradingpicture quality, because it only deinterlaces video when it visiblyneeds to be. Multi-threaded deinterlacing The "Slow" and "Slower" filters, as well as the new decomb filter,will now take advantage of as many processors as you can throw at them. "Same as source framerate" really is the same as the source framerate HandBrake now, by default, passes through the exact video framerateof the source instead of smoothing to a constant rate, which could leadto frames being duplicated or dropped. Theora video encoding HandBrake now can encode video using the Theora codec. Updated libraries Besides x264, updated libraries include libsamplerate, libogg,xvidcore, libmpeg2, lame, faac, and ffmpeg's libavcodec, libavformat,and libswscale. Massive improvements to all interfaces As hard as it might be to believe, the changes listed above are only the tip of the iceberg. A much longer list is available,but even that is only a brief summary. There have been well over 600changes to HandBrake's code base since 0.9.2, including hundreds of bugfixes, and a thorough log can be found on the Trac. DM8000 + DM800SE + VU+DUO + Wavefrontier T90 + 10LNBs Hemertje.Dreambox Webmaster Sat-nerds Moderator Plinux Member
Ron Geplaatst: 15 maart 2009 Geplaatst: 15 maart 2009 Dit gaat te ver off-topic. Graag weer on - topic en de rest in het linux forum bespreken!
Gast lexie37 Geplaatst: 17 april 2009 Geplaatst: 17 april 2009 Origineel bericht van: hemertje Origineel bericht van: dream-on thanks! weet je toevallig ook hoe ik bij bv aan een mkv kan zien welk type het is? kijk hier maar eenshttp://mediainfo.sourceforge.net/nl voor de goede orde, DTS werkt (nog) niet, DMM wil dit wel gaan implementeren, WMV en andere microsoft codecs zullen nooit ondersteunt worden Dolby 5.1 werkt wel? Ik krijg alleen prologig2 , zowel met de tv uitzendingen als ook de dvd speler
Aanbevolen berichten
Maak een account aan of log in om te reageren
Je moet een lid zijn om een reactie te kunnen achterlaten
Account aanmaken
Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!
Registreer een nieuwe accountInloggen
Heb je reeds een account? Log hier in.
Nu inloggen