[TF7710PVR] Enigma2 0.2 aangekondigd

[Hadrian]

Citaat:

dear tf community,

teamducktales proudly presents his second version of enigma2 for tf 7700 hdpvr today:

Code:

                                           ..,,,uuuuuuux-                                      .XJ$$$$$$$$$$$$$R"                                     :<???????$$$P???"     ... uuuux ,ucdL                                     '''''` :<$$$: .dWWW>:;$$::$$F":J$$"''      ,uuuouuu,                 .uu xcd:x$u.:J$$$ :J$P9$>;$$F.<$$h=`?$h     :$$$$$$$$$$b,   .uz  ucd xJ$$$:J$6d$$F':$$$F:J$P;3$>J$P.:3$,,,;J$$E    $$$$$$$$$$$$c::$$F;$$FJ$$P":<$$$$P` :J$$$:J$P???$>$$??:????`???"   ::?"'<Xio::??$$$>J$$ :t$P;$P`  :3$$P$$u::$$$P:??' `?F'  ''   $$P  `:9$$>$$F;J$><$C,,u;$$P:?$$h:3$$>      :<$$$'   <8$$>$$X<J$$:<$$$$F:??' `"":J$$$      :3$$P   $$$:$$$$$P `:???'       :<P???"     ::$$$' .d$$$$'`????"              '::::    .$$6ud$$$$F.;cJJ$$$$$$$PF'::9$$$$$$$PF"`'?????""''               ,,, ::::::::::::..           ,z$$$$$ :::::::::::::::::.         e$$$$$$$$ ::::::::::::::::::::       d$$$$$$$$$$;`::::::::::::::::::::      ::."$$$$$$$$$ :::::::::::::::::::::     :::::."$$$$$$$ ::::::::::::::::::::    ::::::::."$$$$$b ::''''''''':::::::'    `:::::::::`$$P" . :''''<<<<<<;.  `'      `:::::::: "".,.----=--..`'<<<<<<;        `:::'',-'` .::::::::::`'- `<<<<;      .::.          `,-`.::::::::::'  .. `::.      .:::::::::        ,-'.:::::::::::' dMMMMMMx :::::` .`::::::::      ,'.::::::::::::: dMMMMMMMMMM ``` JMMM `:::::    ,'.:::::::::::' . MMP',ccc "MMM Mb MMMMM `:::; :::::::::::' nM MM',$$$$$$b "Mb4M,M c,`? :'; ::::::::::: xMMMMM'J$$$$$$$$b )MMMMM.`$$.' :::`::::::: dMMMMM'J$$$$$$$$$$F MMMMMM $$$.   :: <`::::: JMMMMM',$$$$$$$$$$$P MMMMMM $$$$  `:::`bc,.. ,edMMMM $$$$$$$$$$$$F MMMMMM $$$$  .   ` ,nMMMMMMMMTMMMM P""?$$$$$$$$".MTT4MM ?$$F;P""?x_   ,d)MMMMMMP'dMMMMM      $$$$$$P  .cCc.    $   cCc L~    ,MMMMMMM ,c, 4MMr      $$$$$  .CCCC>   4   CCC> L"    P)MMMMM> $$?$ "MM      $$$$"  CCCCC'   ,,  CC> % `   ' MMMTMMM `b $$c.?b     $$$"   `CCC'-""___,,,,,__     M"       `?, ??$c,,,,,,cc$7= _,cc$$$$PP"""""??$$$$     "          `"b,_ "?$$$$$$$$$$P"" .. ,d"                   `?$b `,,,,,,.`;;;;;;'j"                    n ?$c`;;;;;;;`',;;; F               ,;-;MM "$b;;;;;,,;;;'j"           ,!!!!!  MMMM,`?$c,_`` _,,cd'          !!!!!!!; MMMMMMn, `"""""''       .  !!!!!!!!!, `"TT';!!!!>   ,;!!!> !!!!!!!!!!!!!   `<!!!! !;,!!!!!!!!! '!!!!!!!!!!!  !!!  !!> !!!!!!;;	#########################################################	#                                                       #	#   Team Ducktales' Enigma2 image for the TF7700HDPVR   #	#                                                       #	#                    Release 0.2                        #	#                                                       #	#########################################################The provided image is based on the Linux operating system and includesthe Enigma2 PVR application. Please read this document carefully beforeinstalling the image.New features and bugfixes (since 0.1)-------------------------------------+ Feature: first beta support for CAMs (upper slot only)+ Feature: added flashing topfield.tfd (if present on the USB stick) to  make going back to Topfield firmware easier+ Feature: freed 16 MB of unused RAM+ Feature: migrated system partition to ext3 filesystem+ Feature: migrated to stlinux-2.6.17.14-0041+ Feature: installation control file (noformat, noupdate, nopartition,  keepsettings, usbhdd)+ Feature: enabled installation to a USB HDD (option usbhdd)+ Feature: improved emergency shutdown policy+ Change: removed mapping of the keys V- (left) and V+ (right) to volume control  to avoid problems in various menus. The volume can now be adjusted with  the keys |< and >|.+ Fix: the keys V-/V+ can now be used to change entries in the timer menu and  to scroll page up/page down.+ Fix: updated the settings for Astra 19°° and added new satellites.xml for  orbital position 13.0, 19.2 and 23.5 east+ Fix: applied the SATA patch to fix interactions with HDDs+ Fix: fixed repeating Diseq commands delaying tuning up to 20 seconds+ Fix: added swap to /etc/fstab+ Fix: added the dvr1 device for recording+ Fix: added updating the network settings to the rcS (activates the user  settings made in e2)+ Fix: fixed the issue with "SID not found in PAT" and some scan problems+ Fix: fixed the issue with low volume+ Fix: improved shutdown behavior so that the PVR is not turned off before  the kernel finished unmounting file systems+ Fix: updated Vader skin (DNS settings, timer)+ Fix: swapped keys zapUp and zapDown+ Fix: Daylight Saving Time- Fix: no video on the FIRST start after installationUnsupported features and known problems---------------------------------------- The only supported tuner type is DVB-S2 CX24116/CX24118.- Timeshift does not work yet.- Rewind does not work properly. Sometimes enigma2 freezes when rewinding.  "Jump back" can be used instead (see playback keys).- Samsung LCD TVs will probably have problems with the default resolution  576i.- HDD shuts down and spins up very often, workaround - disable HDD standby in  e2 settings.- With "AC3 downmix on" there is no sound on optical when AC3 stream is  selected. With "AC3 downmix off" the system migt freeze when zapping to  channels with AC3.- After stopping the playback of a an active recording (a kind of timeshift)  the screen remains black and does not recover until the receiver is restarted.DISCLAIMER----------The software is provided 'as is' without warranty of any kind.Please consider that you may lose manufacturer's warranty when installingthis image.This is an alpha image. That is some functions may not be available or bebuggy (causing crashes/freezes or loss of data).The installation of the Enigma2 image formats (ext2) the internal harddrive.ALL FILES ON THE HARDDRIVE WILL BE LOST. The same is true if you go back tothe original Topfield firmware.Installation instructions-------------------------You will need either a USB stick or a USB harddrive with FAT32 filesystem.- Copy the files Enigma_Installer.tfd, uImage, rootfs.tar.gz and  Engima_Installer.ini to the USB device. Please read the instructions  in Engima_Installer.ini on how to modify the installation process.- Attach the drive to the USB slot.- Open the Topfield firmware update menu and select the image file  Enigma_Installer.tfd on the USB drive.- Start the firmware update from USB. This part is very quick.  Restart the receiver when the display shows the blinking END- After about 6-7 minutes the installation should be finished.  DO NOT REMOVE THE USB DEVICE UNTIL the INSTALLATION HAS FINISHED or  THE INSTALLER REQUESTS TO DETACH THE USB DEVICE.- When installing to a USB HDD (option usbhdd in Enigma_Installer.tfd)  the installer will ask you to detach the initial USB device and to  attach a USB HDD to install to.During the installation the VFD shows the current installation step anderror messages (if any):"9 USB STCK"	mounting USB stick"STCK DETACH"	waiting for USB device to be detached (USB HDD installation)"HDD ATTACH"	waiting for USB HDD to be attached (USB HDD installation)"8 HDD PART"	partitioning HDD"7 HDD FMT"	formatting HDD (root fs)"6 HDD FMT"	formatting HDD (data fs)"5 HDD SWAP"	creating swap"4 ROOT FS"	installing root file system"3 LOADER"	flashing U-Boot settings"2 KERNEL"	flashing kernel"1 FSCK"	checking file system"0 REBOOT"	rebooting within 2 secondsIt is recommended to attach a cable to the serial port and log the output in aterminal program (e.g. TeraTerm) during the installation and the first start.Serial port settings: 115200, 8, N, 1.The USB filesystem should be writable to prevent infinite installation loop.(The file uImage is renamed to avoid the infinite loop.)The first start usually takes approximately 3 minutes due to creation ofdevice nodes.To uninstall Enigma2, copy your favorite Topfield firmware on your stick andrename it to "topfield.tfd" (don't forget to rename uImage_ if necessary). Theinstaller will flash the firmware and reboot the Toppy. There have been reportsthat the PVR appears to be dead for about 5 minutes until the picture comes onthe TV screen. So please be patient. Enigma2 can also be removed by flashing aregular Topfield firmware image using standard tools like TFD-Down or VegaPackvia the serial interface.First start-----------On the first start the Enigma2 interactively configures the video output to beused. The following options are available:- Component- HDMI- Scart- HDMI-PCEach connection type is switched on for 30 seconds. The VFD displays theconnection type which is currently active. You can either wait until theconnection type you want is displayed and your TV shows a picture or youcan select the connection type with Up and Down buttons on the remote control.Confirm the desired connection type with the Ok button. After that you canproceed with the configuration supported by the configuration wizard.The image contains a default channel table. If you want to replace it you canperform a channel scan later.Network configuration---------------------The U-Boot settings contain the following configuration by default:MAC address 00:3e:9e:11:22:33IP address 192.168.178.100That is after booting the image you can login via telnet if your computer is inthe same subnet.These values are set up by the U-Boot. You can temporarily change the valuesin Enigma2 menu "Settings/System/Network.../Adapter settings" or change theU-Boot parameters.Default U-Boot bootargs:ba1=console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:192.168.178.10:192.168.178.10:255.255.255.0:tf7700:eth0:off nwhwconf=device:eth0,hwaddr:00:3e:9e:11:22:33 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000To change the IP addresses interrupt the U-Boot countdown and execute thefollowing command with replaced IP addresses:TF7700> set ba1 'console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=<own IP>:<server IP>:<DNS IP>:255.255.255.0:tf7700:eth0:off nwhwconf=device:eth0,hwaddr:00:3e:9e:11:22:33 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000'Please note that the setting has to be split in two lines to bypass thelimitation of U-Boot. The second line must start with a white space. Thestring is enclosed in single quotes. Any change is temporary unless thesettings are saved to flash using the command "saveenv". Before savingsettings to flash you should test whether the kernel boots with your settings.Enter "boot" at the U-Boot prompt to start the kernel. (After testing thesettings without saving them you will have to enter your changes again.)Playback keys-------------Play - shows the file listYellow - pause/unpause playbackGreen - continue playbackRed - jump to the beginningBlue - jump to the next bookmark1/3 jump 15 seconds backwards/forwards (configurable in the settings menu)4/6 jump 60 seconds backwards/forwards (configurable in the settings menu)7/9 jump 5 minutes backwards/forwards (configurable in the settings menu)Full key map can be found in the file /usr/local/share/enigma2/keymap.xml.Team Ducktales

Links naar de software laat ik achterwege omdat er copyrighted materiaal in kan voorkomen (weet het niet helemaal zeker). Vragen via PM heeft ook geen zin, wees creatief.

[Hadrian]

Da's goed nieuws:

Citaat:

+ Feature: first beta support for CAMs (upper slot only)

[Gast Henri Aalten]

Origineel bericht van: Hadrian

Citaat:

dear tf community,

teamducktales proudly presents his second version of enigma2 for tf 7700 hdpvr today:

Code:

                                           ..,,,uuuuuuux-                                      .XJ$$$$$$$$$$$$$R"                                     :<???????$$$P???"     ... uuuux ,ucdL                                     '''''` :<$$$: .dWWW>:;$$::$$F":J$$"''      ,uuuouuu,                 .uu xcd:x$u.:J$$$ :J$P9$>;$$F.<$$h=`?$h     :$$$$$$$$$$b,   .uz  ucd xJ$$$:J$6d$$F':$$$F:J$P;3$>J$P.:3$,,,;J$$E    $$$$$$$$$$$$c::$$F;$$FJ$$P":<$$$$P` :J$$$:J$P???$>$$??:????`???"   ::?"'<Xio::??$$$>J$$ :t$P;$P`  :3$$P$$u::$$$P:??' `?F'  ''   $$P  `:9$$>$$F;J$><$C,,u;$$P:?$$h:3$$>      :<$$$'   <8$$>$$X<J$$:<$$$$F:??' `"":J$$$      :3$$P   $$$:$$$$$P `:???'       :<P???"     ::$$$' .d$$$$'`????"              '::::    .$$6ud$$$$F.;cJJ$$$$$$$PF'::9$$$$$$$PF"`'?????""''               ,,, ::::::::::::..           ,z$$$$$ :::::::::::::::::.         e$$$$$$$$ ::::::::::::::::::::       d$$$$$$$$$$;`::::::::::::::::::::      ::."$$$$$$$$$ :::::::::::::::::::::     :::::."$$$$$$$ ::::::::::::::::::::    ::::::::."$$$$$b ::''''''''':::::::'    `:::::::::`$$P" . :''''<<<<<<;.  `'      `:::::::: "".,.----=--..`'<<<<<<;        `:::'',-'` .::::::::::`'- `<<<<;      .::.          `,-`.::::::::::'  .. `::.      .:::::::::        ,-'.:::::::::::' dMMMMMMx :::::` .`::::::::      ,'.::::::::::::: dMMMMMMMMMM ``` JMMM `:::::    ,'.:::::::::::' . MMP',ccc "MMM Mb MMMMM `:::; :::::::::::' nM MM',$$$$$$b "Mb4M,M c,`? :'; ::::::::::: xMMMMM'J$$$$$$$$b )MMMMM.`$$.' :::`::::::: dMMMMM'J$$$$$$$$$$F MMMMMM $$$.   :: <`::::: JMMMMM',$$$$$$$$$$$P MMMMMM $$$$  `:::`bc,.. ,edMMMM $$$$$$$$$$$$F MMMMMM $$$$  .   ` ,nMMMMMMMMTMMMM P""?$$$$$$$$".MTT4MM ?$$F;P""?x_   ,d)MMMMMMP'dMMMMM      $$$$$$P  .cCc.    $   cCc L~    ,MMMMMMM ,c, 4MMr      $$$$$  .CCCC>   4   CCC> L"    P)MMMMM> $$?$ "MM      $$$$"  CCCCC'   ,,  CC> % `   ' MMMTMMM `b $$c.?b     $$$"   `CCC'-""___,,,,,__     M"       `?, ??$c,,,,,,cc$7= _,cc$$$$PP"""""??$$$$     "          `"b,_ "?$$$$$$$$$$P"" .. ,d"                   `?$b `,,,,,,.`;;;;;;'j"                    n ?$c`;;;;;;;`',;;; F               ,;-;MM "$b;;;;;,,;;;'j"           ,!!!!!  MMMM,`?$c,_`` _,,cd'          !!!!!!!; MMMMMMn, `"""""''       .  !!!!!!!!!, `"TT';!!!!>   ,;!!!> !!!!!!!!!!!!!   `<!!!! !;,!!!!!!!!! '!!!!!!!!!!!  !!!  !!> !!!!!!;;	#########################################################	#                                                       #	#   Team Ducktales' Enigma2 image for the TF7700HDPVR   #	#                                                       #	#                    Release 0.2                        #	#                                                       #	#########################################################The provided image is based on the Linux operating system and includesthe Enigma2 PVR application. Please read this document carefully beforeinstalling the image.New features and bugfixes (since 0.1)-------------------------------------+ Feature: first beta support for CAMs (upper slot only)+ Feature: added flashing topfield.tfd (if present on the USB stick) to  make going back to Topfield firmware easier+ Feature: freed 16 MB of unused RAM+ Feature: migrated system partition to ext3 filesystem+ Feature: migrated to stlinux-2.6.17.14-0041+ Feature: installation control file (noformat, noupdate, nopartition,  keepsettings, usbhdd)+ Feature: enabled installation to a USB HDD (option usbhdd)+ Feature: improved emergency shutdown policy+ Change: removed mapping of the keys V- (left) and V+ (right) to volume control  to avoid problems in various menus. The volume can now be adjusted with  the keys |< and >|.+ Fix: the keys V-/V+ can now be used to change entries in the timer menu and  to scroll page up/page down.+ Fix: updated the settings for Astra 19°° and added new satellites.xml for  orbital position 13.0, 19.2 and 23.5 east+ Fix: applied the SATA patch to fix interactions with HDDs+ Fix: fixed repeating Diseq commands delaying tuning up to 20 seconds+ Fix: added swap to /etc/fstab+ Fix: added the dvr1 device for recording+ Fix: added updating the network settings to the rcS (activates the user  settings made in e2)+ Fix: fixed the issue with "SID not found in PAT" and some scan problems+ Fix: fixed the issue with low volume+ Fix: improved shutdown behavior so that the PVR is not turned off before  the kernel finished unmounting file systems+ Fix: updated Vader skin (DNS settings, timer)+ Fix: swapped keys zapUp and zapDown+ Fix: Daylight Saving Time- Fix: no video on the FIRST start after installationUnsupported features and known problems---------------------------------------- The only supported tuner type is DVB-S2 CX24116/CX24118.- Timeshift does not work yet.- Rewind does not work properly. Sometimes enigma2 freezes when rewinding.  "Jump back" can be used instead (see playback keys).- Samsung LCD TVs will probably have problems with the default resolution  576i.- HDD shuts down and spins up very often, workaround - disable HDD standby in  e2 settings.- With "AC3 downmix on" there is no sound on optical when AC3 stream is  selected. With "AC3 downmix off" the system migt freeze when zapping to  channels with AC3.- After stopping the playback of a an active recording (a kind of timeshift)  the screen remains black and does not recover until the receiver is restarted.DISCLAIMER----------The software is provided 'as is' without warranty of any kind.Please consider that you may lose manufacturer's warranty when installingthis image.This is an alpha image. That is some functions may not be available or bebuggy (causing crashes/freezes or loss of data).The installation of the Enigma2 image formats (ext2) the internal harddrive.ALL FILES ON THE HARDDRIVE WILL BE LOST. The same is true if you go back tothe original Topfield firmware.Installation instructions-------------------------You will need either a USB stick or a USB harddrive with FAT32 filesystem.- Copy the files Enigma_Installer.tfd, uImage, rootfs.tar.gz and  Engima_Installer.ini to the USB device. Please read the instructions  in Engima_Installer.ini on how to modify the installation process.- Attach the drive to the USB slot.- Open the Topfield firmware update menu and select the image file  Enigma_Installer.tfd on the USB drive.- Start the firmware update from USB. This part is very quick.  Restart the receiver when the display shows the blinking END- After about 6-7 minutes the installation should be finished.  DO NOT REMOVE THE USB DEVICE UNTIL the INSTALLATION HAS FINISHED or  THE INSTALLER REQUESTS TO DETACH THE USB DEVICE.- When installing to a USB HDD (option usbhdd in Enigma_Installer.tfd)  the installer will ask you to detach the initial USB device and to  attach a USB HDD to install to.During the installation the VFD shows the current installation step anderror messages (if any):"9 USB STCK"	mounting USB stick"STCK DETACH"	waiting for USB device to be detached (USB HDD installation)"HDD ATTACH"	waiting for USB HDD to be attached (USB HDD installation)"8 HDD PART"	partitioning HDD"7 HDD FMT"	formatting HDD (root fs)"6 HDD FMT"	formatting HDD (data fs)"5 HDD SWAP"	creating swap"4 ROOT FS"	installing root file system"3 LOADER"	flashing U-Boot settings"2 KERNEL"	flashing kernel"1 FSCK"	checking file system"0 REBOOT"	rebooting within 2 secondsIt is recommended to attach a cable to the serial port and log the output in aterminal program (e.g. TeraTerm) during the installation and the first start.Serial port settings: 115200, 8, N, 1.The USB filesystem should be writable to prevent infinite installation loop.(The file uImage is renamed to avoid the infinite loop.)The first start usually takes approximately 3 minutes due to creation ofdevice nodes.To uninstall Enigma2, copy your favorite Topfield firmware on your stick andrename it to "topfield.tfd" (don't forget to rename uImage_ if necessary). Theinstaller will flash the firmware and reboot the Toppy. There have been reportsthat the PVR appears to be dead for about 5 minutes until the picture comes onthe TV screen. So please be patient. Enigma2 can also be removed by flashing aregular Topfield firmware image using standard tools like TFD-Down or VegaPackvia the serial interface.First start-----------On the first start the Enigma2 interactively configures the video output to beused. The following options are available:- Component- HDMI- Scart- HDMI-PCEach connection type is switched on for 30 seconds. The VFD displays theconnection type which is currently active. You can either wait until theconnection type you want is displayed and your TV shows a picture or youcan select the connection type with Up and Down buttons on the remote control.Confirm the desired connection type with the Ok button. After that you canproceed with the configuration supported by the configuration wizard.The image contains a default channel table. If you want to replace it you canperform a channel scan later.Network configuration---------------------The U-Boot settings contain the following configuration by default:MAC address 00:3e:9e:11:22:33IP address 192.168.178.100That is after booting the image you can login via telnet if your computer is inthe same subnet.These values are set up by the U-Boot. You can temporarily change the valuesin Enigma2 menu "Settings/System/Network.../Adapter settings" or change theU-Boot parameters.Default U-Boot bootargs:ba1=console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:192.168.178.10:192.168.178.10:255.255.255.0:tf7700:eth0:off nwhwconf=device:eth0,hwaddr:00:3e:9e:11:22:33 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000To change the IP addresses interrupt the U-Boot countdown and execute thefollowing command with replaced IP addresses:TF7700> set ba1 'console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=<own IP>:<server IP>:<DNS IP>:255.255.255.0:tf7700:eth0:off nwhwconf=device:eth0,hwaddr:00:3e:9e:11:22:33 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000'Please note that the setting has to be split in two lines to bypass thelimitation of U-Boot. The second line must start with a white space. Thestring is enclosed in single quotes. Any change is temporary unless thesettings are saved to flash using the command "saveenv". Before savingsettings to flash you should test whether the kernel boots with your settings.Enter "boot" at the U-Boot prompt to start the kernel. (After testing thesettings without saving them you will have to enter your changes again.)Playback keys-------------Play - shows the file listYellow - pause/unpause playbackGreen - continue playbackRed - jump to the beginningBlue - jump to the next bookmark1/3 jump 15 seconds backwards/forwards (configurable in the settings menu)4/6 jump 60 seconds backwards/forwards (configurable in the settings menu)7/9 jump 5 minutes backwards/forwards (configurable in the settings menu)Full key map can be found in the file /usr/local/share/enigma2/keymap.xml.Team Ducktales

Links naar de software laat ik achterwege omdat er copyrighted materiaal in kan voorkomen (weet het niet helemaal zeker). Vragen via PM heeft ook geen zin, wees creatief.

Is er een korte vertaling mogelijk, met alleen de belangrijkste punten.

Werkt de cam
is de opnamen gedecodeerd

[Gast gifre]

Ziet er goed uit..................

Maar vind de software niet, en ben al zeer creatief geweest hoor

 

Ze bestaat toch al!?

[Hadrian]

Origineel bericht van: Henri Aalten

Is er een korte vertaling mogelijk, met alleen de belangrijkste punten.

Werkt de cam
is de opnamen gedecodeerd

- Er is beta-cam (LOL) ondersteuning, alleen in het bovenste slot
- SID to PAT is gefixt (zal wel te maken hebben met vreemde ingescande kanalennamen)
- Geluid was te zacht, is gefixt
- HDD en bestandsoptimalisaties
- Update in de skin
- Zapping wat gebruiksvriendelijker
- 16MB ongebruikt geheugen wordt nu wel gebruikt, nieuwere Linuxversie
- En nog wat spul...

CAM-support is nu dus beta.
Of opnames gecodeerd zijn, zullen we zelf moeten testen.

[Gast Henri Aalten]

Ik ben zeer benieuwd !!!!

[Jürgen]

Origineel bericht van: Henri Aalten

Is er een korte vertaling mogelijk, met alleen de belangrijkste punten.

Werkt de cam
is de opnamen gedecodeerd

Henri,
Dat je de bovenstaande tekst als quote toevoegt is normaal maar is het nu echt nodig om het heeeeeele verhaal als quote toe te voegen?

[Gast Henri Aalten]

Sorry daarvoor, dat was niet nodig.

Ik wilde mijn vraag duidelijk stellen, maar is onhandig van mij gedaan.

[Gast pinq]

Origineel bericht van: Jürgen

Origineel bericht van: Henri Aalten

Is er een korte vertaling mogelijk, met alleen de belangrijkste punten.

Werkt de cam
is de opnamen gedecodeerd

Henri,
Dat je de bovenstaande tekst als quote toevoegt is normaal maar is het nu echt nodig om het heeeeeele verhaal als quote toe te voegen?

Dat had iedereen al gezien, maar is het dan nodig dat jij daar nog weer eens overheen moet pissen om iemand terecht te wijzen? Je eerdere sollicitaties als moderator waren allang opgevallen, dus stoppen maar; die zijn er al genoeg.

[winwiz]

Origineel bericht van: pinq

Origineel bericht van: Jürgen

Origineel bericht van: Henri Aalten

Is er een korte vertaling mogelijk, met alleen de belangrijkste punten.

Werkt de cam
is de opnamen gedecodeerd

Henri,
Dat je de bovenstaande tekst als quote toevoegt is normaal maar is het nu echt nodig om het heeeeeele verhaal als quote toe te voegen?

Dat had iedereen al gezien, maar is het dan nodig dat jij daar nog weer eens overheen moet pissen om iemand terecht te wijzen? Je eerdere sollicitaties als moderator waren allang opgevallen, dus stoppen maar; die zijn er al genoeg.

Er was iets met pot en ketel....... kweetniet

[Gast Henri Aalten]

Nu graag weer on Topic

[Gast pinq]

Origineel bericht van: winwiz

Origineel bericht van: pinq

Origineel bericht van: Jürgen

Origineel bericht van: Henri Aalten

Is er een korte vertaling mogelijk, met alleen de belangrijkste punten.

Werkt de cam
is de opnamen gedecodeerd

Henri,
Dat je de bovenstaande tekst als quote toevoegt is normaal maar is het nu echt nodig om het heeeeeele verhaal als quote toe te voegen?

Dat had iedereen al gezien, maar is het dan nodig dat jij daar nog weer eens overheen moet pissen om iemand terecht te wijzen? Je eerdere sollicitaties als moderator waren allang opgevallen, dus stoppen maar; die zijn er al genoeg.

Er was iets met pot en ketel....... kweetniet

Nee je weet het niet.

[OebeleUitMarum]

Hallo allemaal,

 

nu maar even weer serieus na al dit onzinnige op elkaar gereageer (ja ja ik doe het nu zelf ook maar reageer daar maar niet meer op)....

 

Ik heb de 0.2 geladen en deze werkt erg mooi voor de FTA kanalen;

helaas werkt de CAM support nog niet voor de SECA3 kaartjes van CanalDigitaal....

(de powercamPRO die ik heb wordt wel netjes herkend nu)

 

Maar weer wachten op de volgende versie.

 

Groeten, prettige paasdagen.

 

Oebele

[Gast gifre]

Na een dag knoeien met de nieuwe versie.......

Aston en Powercam worden herkent, doch krijg enkel 2 versleutelde zenders werkend.

Een en Canvas, al de andere geen beeld, uiteraard de FTA zenders wel.

Na een poging het netwerk in orde te krijgen, steeds een groen scherm, had liever met deze dagen een geel gehad

 

Nog veel werk aan de winkel.

 

[OebeleUitMarum]

Origineel bericht van: gifre

Na een dag knoeien met de nieuwe versie.......
Aston en Powercam worden herkent, doch krijg enkel 2 versleutelde zenders werkend.
Een en Canvas, al de andere geen beeld, uiteraard de FTA zenders wel.
Na een poging het netwerk in orde te krijgen, steeds een groen scherm, had liever met deze dagen een geel gehad

Nog veel werk aan de winkel.

Aha, dus een en canvas wel; dat had ik niet geprobeerd;

het netwerk kan op 2 manieren;

1e manier staat in de release notes:
To change the IP addresses interrupt the U-Boot countdown and execute the
following command with replaced IP addresses:
TF7700> set ba1 'console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=<own IP>:<server IP>:<DNS IP>:255.255.255.0:tf7700:eth0:off nwhwconf=device:eth0,hwaddr:00:3e:9e:11:22:33
mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000'

Please note that the setting has to be split in two lines to bypass the
limitation of U-Boot. The second line must start with a white space. The
string is enclosed in single quotes. Any change is temporary unless the
settings are saved to flash using the command "saveenv". Before saving
settings to flash you should test whether the kernel boots with your settings.
Enter "boot" at the U-Boot prompt to start the kernel. (After testing the
settings without saving them you will have to enter your changes again.)


De 2e manier is via het menu, maar dan is er een probleem met de skin.xml;
daarover is in een ander forum al eens iets geschreven en moet je de bestaande skin.xml door een nieuwe vervangen;
daarna moet je nog iets in de startup bestanden veranderen om deze setting ook definitief te maken; kortom ik kies altijd (nou ja met 0.1 en met 0.2) voor methode 1, die werkt perfekt!

Groeten,
Oebele