woodytwo Geplaatst: 8 september 2009 Geplaatst: 8 september 2009 Wie kan mij helpen aan een werkende NewCS config voor dm500, ik krijg het niet voor elkaar de cardserver goed te laten draaien,inloggen van de client gaat nog goed, maar hij crasht meteen wanneer de kaart word aangesproken. Dus ik denk dat het in de kaartlees instellingen zit. Overigens lukt het me ook niet met versie 1.65 en 1.66 , het gebruikte image is Pli Jade en ja ik heb CCcam afgeschoten. De kaart word ook goed gelezen door NewCS het gaat echter fout nadat ik naar een NL kanaal zap. Alvast bedankt..
woodytwo Geplaatst: 8 september 2009 Auteur Geplaatst: 8 september 2009 Hierbij mijn nhuidige config: <?xml version="1.0"?> <!-- For setup-issues, look in readme.txt! If there are other troubles, try different forums or irc channels around ) The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf. ** This is the example file for Dreambox/TD etc. that use SCI interfaces. --> <newCSconfig> <globals> <listening-ip>127.0.0.1</listening-ip> </globals> <readers name="SCI"> <device> <name>lower</name> <type>sci</type> <mhz>357</mhz> <node>/dev/sci0</node> <parity>odd</parity> <reset>normal</reset> <export>Yes</export> <enabled>Yes</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>No</blockga> <!-- <boxkey>0000000000</boxkey> --> <!-- <rsa>0000000000</rsa> --> <irdeto-camkey>0000000000000000</irdeto-camkey> <irdeto-camkey-data>00000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> <crypto-special>No</crypto-special> <ipk>00000000000000000000000000000000000000000000000000000000</ipk> <ucpk>0000000000000000000000000000000000000000000000000000000</ucpk> <PTShandshake>No</PTShandshake> <carddetect>yes</carddetect> <newcamd_port>34000</newcamd_port> <autosid>Yes</autosid> <Seca-PPV>no</Seca-PPV> <pincode>0000</pincode> <priority>round</priority> </device> </readers> <radegastserver> <enabled>No</enabled> <port>16000</port> <allow> <hostname>localhost</hostname> </allow> </radegastserver> <cache> <emm>2</emm> <ecm>3</ecm> </cache> <debug> <password>NewCSpwd</password> <level>normal</level> <type>init</type> <output>console,tcp</output> <console_options>normal,init</console_options> <tcp_port>3001</tcp_port> <tcp_options>normal,init</tcp_options> </debug> <newcamdserver> <enabled>Yes</enabled> <name>newcs</name> <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey> <user> <name>DM500CABOZO</name> <password>CABOZO</password> <au>on</au> <sidoverride>off</sidoverride> <spider>No</spider> </user> </newcamdserver> <httpd> <server> <!-- Port to accept connections on --> <port>8080</port> <enabled>yes</enabled> </server> <user> <!-- valid value for userfile are: Any username you'd like - Used for browser to logon (its case sensitive). --> <name>newcs</name> <!-- valid value for password are: Any password you'd like - Used for browser to logon (its case sensitive). --> <password>newcs</password> <!-- valid value for accesslevel are: admin, stats - Define what rights the user has in the web-console --> <accesslevel>admin</accesslevel> </user> </httpd> </newCSconfig> Hierbij de output van NewCS.. root@dm500 /var/bin # newcs This is NewCS 1.67 RC1 [build: 95] - the New CardServer by the Butter-team.. Compiled on Jul 14 2009 at 11:56:06 Reading Config file from /var/tuxbox/config/newcs.xml NewCS is trying to bind to IP: 127.0.0.1 TCP-log password is enabled, set to: NewCSpwd TCP-log set to simple mode level: normal type: init output: console,tcp logger config: level 1 type 3 output 5 Console log options: level 1 type 3 TCP log options: level 1 type 3 [ 19:59:06 ] [ Box detect ] Box type 2 (Dream Multimedia (PPC) Box) [ 19:59:06 ] [ Config ] Option <blockc0> for device 0 (lower) not present, defaulting to NO [ 19:59:06 ] [ Config ] Value in <ipk> for device 0 (lower) is INVALID, skipping... [ 19:59:06 ] [ Config ] Value in <ucpk> for device 0 (lower) is INVALID, skipping... [ 19:59:06 ] [ Config ] Pincode for device 0 (lower): 0000 [ 19:59:06 ] [ Config ] /dev/sci0 ECM priority: round [ 19:59:06 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin [ 19:59:06 ] [ EMM Cache ] Initialising dynamic Cache [ 19:59:06 ] [ ECM Cache ] Initialising dynamic Cache [ NewCS ] Process ID is: 2860 [ 19:59:06 ] [ Loader ] Starting Telnet on port 3001 [ 19:59:06 ] [ Loader ] Started HTTP-server on port: 8080 [ 19:59:06 ] [ Loader ] Reader type 5 on node /dev/sci0 [ 19:59:06 ] [ Sci ] Closing device /dev/sci0 [Handle=-1] [ 19:59:06 ] [ Sci ] Opening device /dev/sci0 SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS [ 19:59:06 ] [ Sci ] resetting card now [ 19:59:06 ] [ Sci ] Reset [ 19:59:07 ] [ Sci ] Card reset [ 19:59:08 ] [ ATR ] T=0 1etu=372.00us Guardtime:13etu WWT:144000etu [ 19:59:08 ] [ ATR ] Historical bytes: p p [0A] [0E] l [b6] [D6] [ 19:59:08 ] [ Loader ] Init Seca card [ 19:59:08 ] [ KeymaN ] Adding key 000000220c2737 type 0 on Provider 000000 for caid 0100 ID=0 [ 19:59:08 ] [ KeymaN ] Adding key 0000001106139b type 1 on Provider 000000 for caid 0100 ID=0 [ 19:59:08 ] [ KeymaN ] Adding key 000000002f611c type 1 on Provider 00006A for caid 0100 ID=1 [ 19:59:08 ] [ Loader ] Card 0100 on port /dev/sci0 ready [ 19:59:08 ] [ Loader ] Starting Newcamd Server on port 34000 [ 19:59:08 ] [ NewCS ] Ready to GO! root@dm500 /var/bin # [ 19:59:08 ] [ Newcamd ] Newcamd thread Server started on port 34000 newcamd: main loop [ 20:01:37 ] [ Newcamd:34000 ] User DM500CABOZO logged in, client: Mgcamd en de outupt van de client MGCamd... root@dm500 /var/bin # mgcamd tuxbox mgcamd v1.31 by mixvt (compiled Oct 29 2008 19:10:42) [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:0 [mg] Ecm cache time: 15 Box type: dreambox root@dm500 /var/bin # Conax.Key error 2: No such file or directory SoftCam.Key error 2: No such file or directory AutoRoll.Key error 2: No such file or directory Conax.Key error 2: No such file or directory [config] newcamd route = DM500CABOZO:127.0.0.1:34000 server newcs newcamd keep alive: 0, incoming port: 10000 [mgcam] emm thread started [mgcamd] tps update started. /var/keys/tps.bin error 2: No such file or directory [newcamd] Connecting to 127.0.0.1:34000... [newcamd] Login to 127.0.0.1:34000 as DM500CABOZO accepted (0ms) [newcamd] Card data from 127.0.0.1:34000 (0ms): EMM enabled: UA yes SA yes GA yes, Card serial: ******* Userid 1 caid 100 providers 2 Idents: 000000 00006A ids: 1106139B 2F611C got 160 cmd 9F [mg0] namespace C00000 t-id 451 on-id 35 [mg0] descramble on 1, source 0 [mg0] service FA6 index 0 pmt pid 83A (1) ECM: CaID: 0x0622 -> CaPID: 0x0566 ProvID: 000000 ECM: CaID: 0x0100 -> CaPID: 0x0642 ProvID: 00006A ECM: CaID: 0x0100 -> CaPID: 0x070A ProvID: 00006A [mg0] No irdeto key(s) found for id 0 keynr 00 [mg0] network can't decode [mg0] No irdeto key(s) found for id 0 keynr 00 [mg0] network can't decode [mg0] No irdeto key(s) found for id 0 keynr 00 [mg0] network can't decode [mg0] No irdeto key(s) found for id 0 keynr 00 [mg0] network can't decode [mg0] No irdeto key(s) found for id 0 keynr 00 [mg0] network can't decode [mg0] pid 0x0566 failed to decode. [mg0] No seca key(s) found for id 6A keynr 0d [mg0] -> ECM to newcamd 127.0.0.1:34000 [newcamd] 127.0.0.1:34000: problem, will try to reconnect [newcamd] Connecting to 127.0.0.1:34000... [newcamd] Connection to 127.0.0.1:34000 failed (32ms) [mg0] network can't decode [mg0] pid 0x0642 failed to decode. [mg0] No seca key(s) found for id 6A keynr 0e [mg0] network can't decode [mg0] pid 0x070A failed to decode. [mgcamd] emm started [newcamd] Connecting to 127.0.0.1:34000... [newcamd] Connection to 127.0.0.1:34000 failed (35ms) EMM: CaID: 0x0622 -> CaPID: 0x0136 ProvID: 000000 EMM: CaID: 0x0100 -> CaPID: 0x00B6 ProvID: 000000 EMM: CaID: 0x0100 -> CaPID: 0x00B7 ProvID: 00006A EMM: CaID: 0x0100 -> CaPID: 0x00B9 ProvID: 00006C EMM: CaID: 0x0100 -> CaPID: 0x00BA ProvID: 00006D *EMM: CaID: 0x0100 -> CaPID: 0x00BB ProvID: 000000 EMM: CaID: 0x0D02 -> CaPID: 0x1389 ProvID: 000000 [newcamd] Connecting to 127.0.0.1:34000... [newcamd] Connection to 127.0.0.1:34000 failed (39ms) [newcamd] Connecting to 127.0.0.1:34000... [newcamd] Connection to 127.0.0.1:34000 failed (43ms) [newcamd] Connecting to 127.0.0.1:34000... root@dm500 /var/bin # [newcamd] Connection to 127.0.0.1:34000 failed (47ms) [newcamd] Connecting to 127.0.0.1:34000... [newcamd] Connection to 127.0.0.1:34000 failed (0ms) [newcamd] Connecting to 127.0.0.1:34000... [newcamd] Connection to 127.0.0.1:34000 failed (4ms) [newcamd] Connecting to 127.0.0.1:34000... [newcamd] Connection to 127.0.0.1:34000 failed (8ms) [newcamd] Connecting to 127.0.0.1:34000... [newcamd] Connection to 127.0.0.1:34000 failed (12ms) Ziet iemand behalve alle andere nog uit te voeren tweaks waarom NewCS Crasht?? Alvast bedankt.
cellie Geplaatst: 9 september 2009 Geplaatst: 9 september 2009 Ik had ook rare crashes met 1.67. Ben weer naar 1.65 gegaan en alles loopt goed. EDIT: Oops, had je al geprobeerd. Code: <newCSconfig> <readers name="Card Readers"> <device> <name>lower</name> <type>sci</type> <mhz>550</mhz> <node>/dev/sci0</node> <parity>odd</parity> <reset>normal</reset> <export>Yes</export> <enabled>Yes</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>No</blockga> <irdeto-camkey>0000000000000000</irdeto-camkey> <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> <crypto-special>No</crypto-special> <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk> <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk> <PTShandshake>No</PTShandshake> <carddetect>yes</carddetect> <newcamd_port>34000</newcamd_port> <autosid>off</autosid> <Seca-PPV>no</Seca-PPV> <pincode>0000</pincode> <priority>round</priority> <sid> <allow> <id>07D4</id> <id>07D5</id> <id>07D6</id><!-- rtl7 --> <id>07df</id><!-- Discovery --> <id>07F3</id> <id>0fab</id><!-- NED1 --> <id>0fac</id><!-- NED2 --> <id>0fad</id> <id>0fae</id> <id>0FAF</id> <id>177a</id> <id>177f</id> <id>1784</id><!-- Consumenten24 --> <id>1789</id> <id>178E</id> <id>138C</id> <id>138D</id> <id>1397</id> <id>139C</id> <id>139F</id> <id>1793</id> <id>1798</id> <id>179D</id> <id>17A2</id> <id>5158</id><!-- Entertainment --> <id>6FEF</id> <id>6ff0</id> <id>1b7b</id> </allow> </sid> </device> </readers>...... Probeer deze minimale config eens. (wel users toevoegen) Assumption is the mother of all fuckups
Jos Wifi Geplaatst: 29 november 2009 Geplaatst: 29 november 2009 Mijn versie 1.66 crashed wanneer ik <pincode>0000</pincode> in mijn newcs config heb staan. Verwijder deze regel en probeer het nog eens, bij mij werkt ie top nu!
Aanbevolen berichten
Maak een account aan of log in om te reageren
Je moet een lid zijn om een reactie te kunnen achterlaten
Account aanmaken
Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!
Registreer een nieuwe accountInloggen
Heb je reeds een account? Log hier in.
Nu inloggen