Puppy linux installeren op een cf kaart

satede · 2 maart 2010

oke dit krijg ik als ik newcs opstart kan jij hier iets aan zien wat niet goed is ?

This is NewCS 1.67 RC1 [build: 95] - the New CardServer by the Butter-team..

Compiled on Jul 14 2009 at 12:12:45

Reading Config file from /etc/newcs.xml

NewCS is trying to bind to IP: 127.0.0.1

TCP-log password is enabled, set to: NewCSpwd

level: normal

type: init

output: console,tcp

logger config: level 1 type 3 output 5

Console log options: level 1 type 3

TCP log options: level 1 type 3

[ 12:09:12 ] [ Box detect ] Box type 1 (General Boxtype - Generic)

[ 12:09:12 ] [ Config ] Irdeto EMM mode 0 SET on reader Phoenix on Com1

[ 12:09:12 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not present, defaulting to NO

[ 12:09:12 ] [ Config ] Value in <ipk> for device 0 (Phoenix on Com1) is INVALID, skipping...

[ 12:09:12 ] [ Config ] Value in <ucpk> for device 0 (Phoenix on Com1) is INVALID, skipping...

[ 12:09:12 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000

[ 12:09:12 ] [ Config ] /dev/ttyUSB0 ECM priority: round

[ 12:09:12 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin

[ 12:09:12 ] [ EMM Cache ] Initialising dynamic Cache

[ 12:09:12 ] [ ECM Cache ] Initialising dynamic Cache

[ NewCS ] Process ID is: 13439

[ 12:09:12 ] [ Loader ] Starting Telnet on port 1001

[ 12:09:12 ] [ Loader ] Started HTTP-server on port: 8080

[ 12:09:12 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 12:09:12 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 12:09:12 ] [ Phoenix ] Setting Parity to: EVEN

[ 12:09:12 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 12:09:12 ] [ Phoenix ] Setting Baud to standard 9600

[ 12:09:13 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 12:09:15 ] [ ATR ] T=0 1etu=103.92us Guardtime:13etu WWT:144000etu

[ 12:09:15 ] [ ATR ] Historical bytes: p p 7 [0E] l [b6] [D6]

[ 12:09:15 ] [ Loader ] Init Seca card

[ 12:09:15 ] [ Phoenix ] Setting Parity to: EVEN

[ 12:09:15 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 12:09:15 ] [ Phoenix ] Setting Baud to standard 9600

[ 12:09:15 ] [ KeymaN ] Adding key 00000006005d9f type 0 on Provider 000000 for caid 0100 ID=0

[ 12:09:15 ] [ KeymaN ] Adding key 00000008380a03 type 1 on Provider 00006A for caid 0100 ID=1

[ 12:09:15 ] [ KeymaN ] Adding key 00000000000000 type 1 on Provider 00006B for caid 0100 ID=2

[ 12:09:15 ] [ KeymaN ] Adding key 00000000000000 type 1 on Provider 00006C for caid 0100 ID=3

[ 12:09:15 ] [ KeymaN ] Adding key 00000000000000 type 1 on Provider 00006D for caid 0100 ID=4

[ 12:09:15 ] [ Loader ] Card 0100 on port /dev/ttyUSB0 ready

[ 12:09:15 ] [ Loader ] Starting Newcamd Server on port 15050

[ 12:09:15 ] [ Newcamd ] Newcamd thread Server started on port 15050

newcamd: main loop

[ 12:09:15 ] [ Newcamd ] recv: error! 111: Connection refused

[ 12:09:15 ] [ Newcamd:15050 ] User test logout

[ 12:09:15 ] [ NewCS ] Ready to GO!

JanLuc Piccard · 2 maart 2010

Ziet er volgens mij verder goed uit alleen de 2-na laatste regel.

Duid erop als ik het goed heb op een tcp fout.

Als je newcs hebt lopen en je zet je ontvanger aan komen er onder de laatste melding ' ready to go' een paar regeltjes bij.

Kun je die hier plaatsen?

satede · 2 maart 2010

er komen geen regeltjes bij als ik mijn ontvanger aanzet.

JanLuc Piccard · 2 maart 2010

Als ik het goed begrepen heb probeer je met een SAB ontvanger te verbinden.

Voor de sab geldt dat je dan newcamd 5.25 gebruiken moet.

Anders moet je je newcs.xml hier posten.

satede · 2 maart 2010

Code:

<?xml version="1.0"?>

<!--


For setup-issues, look in readme.txt!

If there are other troubles, try different forums or irc channels around )


The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.

-->


<newCSconfig>

	<globals>

		<!-- valid value for listening-ip are:

				IPv4 adress of local interface.  -->

		<listening-ip>127.0.0.1</listening-ip>

	</globals>

	<readers name="Standard Phoenix on PC">

		<device>

			<!-- valid value for name are:

				 Any name of your choice, just to name the device for you to read.	-->

			<name>Phoenix on Com1</name>


			<!-- valid value for type are:

				 phoenix, dbox, sci, dragon, sc8, mp35, smartreader, pcsc (for own binary) or infinity(for own binary).	-->

			<type>phoenix</type>


			<!-- valid value for mhz are:

				 153(1.53mhz), 358(3.58mhz), 368(3,68Mhz), 450(4.5mhz), 536(5.36mhz), 600(6.00mhz), 715(7.15 mhz), 800(8.00mhz)

				 1000(10.00 mhz), 1071(10.71mhz), 1200 (12.00mhz), 1431(14.31 mhz), 1600 (16.00mhz)

				 This setting is now IMPORTANT, normal phoenix usually have 3.57mhz, and can usually be overclocked

				 to 6mhz. For the others you probably need extra crystal (be careful).	-->

			<mhz>358</mhz>


			<!-- valid value for node are full path to device, f.ex /dev/tts/0,

				 /dev/sciX (for dreambox), /dev/cardreaderX (for dragon),

				 /dev/tts/USBX (for a usb2serial device).

				 For PC/SC this is just 0, 1 ,2 and so on (reader number)	-->

			<node>/dev/ttyUSB0</node>


			<!-- valid value for infinity_number are number of device, if you have multiple, only used in infinity binary,

			     0, 1 ...	-->

			<infinity_number>0</infinity_number>


			<!-- valid value for slot are:

				 0-7 (only used on Sc8). 	-->

			<slot>0</slot>


			<!-- valid value for parity are:

				 Odd, Even, None (ignored on sci and dragon).

				 This is only used on serial _BEFORE_ ATR is recieved. 	-->

			<parity>none</parity>


			<!-- valid value for reset are:

				 normal, inverse (ignored on sci and dragon).

				 normal is phoenix, inverse is smartmouse	-->

			<reset>normal</reset>


			<!-- valid value for export are:

				 Yes,No - if not exported only localhost can connect.	-->

			<export>Yes</export>


			<!-- valid value for enabled are:

				 Yes,No - if not enabled it cant be used.	-->

			<enabled>Yes</enabled>


			<!-- valid value for blocksa are:

				 Yes, No - block shared address emm to card.	-->

			<blocksa>No</blocksa>


			<!-- valid value for blockua are:

				 Yes, No - block unique address emm to card.	-->

			<blockua>No</blockua>


			<!-- valid value for blockga are:

				 Yes, No - block group address emm to card.	-->

			<blockga>No</blockga>


			<!-- valid value for blockC0 are:

			     Yes, No - block fake emm to card.	-->

			<blockC0>Yes</blockC0>


			<!-- valid value for boxkey are:

				 The boxkey/boxid of your nagra/nds STB.	-->

			<!-- <boxkey>0000000000</boxkey>  -->


			<!-- valid value for rsa are:

				 The RSA key from your nagra STB.	-->

			<!-- <rsa>0000000000</rsa> -->


			<!-- valid value for camkey are:

			     0 - Europe, 1 - Oz	-->

			<irdetomode>0</irdetomode>


			<!-- valid value for irdeto-camkey are:

			     8byte hex.	-->

			<irdeto-camkey>0000000000000000</irdeto-camkey>


			<!-- valid value for camkey-data are:

			     64byte hex	-->

			<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>


			<!-- valid value for crypto-special are:

				 Yes, No - Used to enable/disable real-time mosc on Cryptoworks.	-->

			<crypto-special>No</crypto-special>


			<!-- valid value for ipk are:

			     64byte hex	-->

			<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>


			<!-- valid value for ucpk are:

			     64byte hex	-->

			<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>


			<!-- valid value for PTShanshake are:

			     Yes, No - Used to enable/disable real-time HighBaud on Cryptoworks and Viacess.	-->

			<PTShandshake>No</PTShandshake>


			<!-- valid value for carddetect are:

				 Yes, No - Used to try to detect if card is present in you cardreader.	-->

			<carddetect>yes</carddetect>


			<!-- valid value for newcamd_port are:

				 0,65535 - Which port newcamd server will listen for incomming connections. -->

			<newcamd_port>15050</newcamd_port>


			<!-- valid value for autosid are:

				 Yes, No - Let NewCS decide which sids should be allowed/denied based on card answers. -->

			<autosid>Yes</autosid>


			<!-- valid value for Seca-PPV are:

				 Yes, No - Let NewCS decide which sids should be allowed/denied based on card answers. -->

			<Seca-PPV>no</Seca-PPV>


			<!-- valid value for Pincode are:

				 0000, 9999 - For f.ex PPV on Conax, also for parental lock on conax and cryptoworks. -->

			<pincode>0000</pincode>

			<protectedsid>

				<!-- valid value for id are:

			  		4 numbers, if the service id is 3 numbers, add a 0 infront of it.	-->

				<id>0000</id><id>0001</id><id>0002</id>

			</protectedsid>



			<!-- Notes about Service ID's:

		 		There are some points worth mentioning:

		 		1. If you allow a sid, all others will be rejected for that caid.

		 		2. When you deny a sid, all others then the denied will be let through to that caid.

		 		3. If you dont specify a reader, all sid's will get let through.

		 		4. Put as many provider-sections in sid as you'd like, and as many id-sections under allow/deny as you want.

		 		5. Deny is the stronger one, will always override allow.

     				6. If you want to add several sid's at once, do <id>0000:0010</id>, this will add all ten to list.  -->

			<sid>

				<allow>

					<!-- valid value for id are:

			  		4 numbers, if the service id is 3 numbers, add a 0 infront of it.	-->

					<id>0000</id><id>0001</id><id>0002</id>

				</allow>

				<deny>

					<!-- valid value for id are:

				  		4 numbers, if the service id is 3 numbers, add a 0 infront of it.	-->

					<id>0000</id><id>0001</id><id>0002</id>

				</deny>

			</sid>

			<!-- valid value for priority are:

			 hard, round, fifo - hard is lower userid, higher priority(gets ECM through before user with higher id),

			 round, there is an equal chance for all users to get ECM through, fifo, first sendt ECM gets through.	-->

			<priority>round</priority>

		</device>

	</readers>

	<radegastserver>

			<!-- valid value for enable are:

				 Yes, No - Enable or Disable radegast server.	-->

			<enabled>No</enabled>


			<!-- valid value for port are:

				 0,65535 - Which port to listen for incomming connections.	-->

			<port>10001</port>


			<allow>

				<!-- valid value for hostname are:

				 	all, IP-address or DNS-name.	-->

				<hostname>localhost</hostname>

			</allow>

	</radegastserver>

	<cache>

			<!-- valid value for emm are:

				 0-255 - Number of EMM's to cache.	-->

			<emm>20</emm>


			<!-- valid value for ecm are:

				 0-255 - Number of ECM's to cache.

                                 -1    - Dynamic ECM Cache.	-->

			<ecm>-1</ecm>

	</cache>

	<httpd>

		<server> <!-- Port to accept connections on -->

			<port>8080</port>

			<enabled>yes</enabled>

		</server>

		<user>

			<!-- valid value for userfile are:

			     Any username you'd like - Used for browser to logon (its case sensitive).	-->

			<name>newcs</name>


			<!-- valid value for password are:

			     Any password you'd like - Used for browser to logon (its case sensitive).	-->

			<password>newcs</password>


			<!-- valid value for accesslevel are:

			     admin, stats - Define what rights the user has in the web-console	-->

			<accesslevel>admin</accesslevel>

		</user>

	</httpd>

	<debug>

			<!-- valid value for password:

				 Max 25 characters and minimum 8, this is case-sensitive.	-->

			<password>NewCSpwd</password>


			<!-- valid value for mode:

			     simple, advanced - Set TCP-Console to advanced mode to get access to 

			     potentially dangerous features.-->

			<mode>simple</mode>


			<!-- valid value for level are:

			     	normal, verbose, spam - How extensive debug should be.	-->

			<level>normal</level>


			<!-- valid value for type are:

				 Init, general, ecm, emm, net, all - Section of debug that should be displayed.	-->

			<type>init</type>


			<!-- valid value for output are:

				 Console, udp, tcp, file, all - Where to show debug.	-->

			<output>console,tcp</output>


			<!-- console_options are so you can set own loglevel/type for console-logger:

				 Should hold level and type-tags like above. 	-->

			<console_options>normal,init</console_options>


			<!-- valid value for logfile are:

				 Path and filename - Where to write debug logs if file or all is chosed in output.	-->

			<logfile>/hdd/newcs.txt</logfile>


			<!-- file_options are so you can set own loglevel/type for file-logger:

				 Should hold level and type-tags like above. 	-->

			<file_options>spam,all</file_options>


			<!-- valid value for udp_host are:

				 IP-address or DNS-name - Where to send debug if udp or all is chosed in output.  -->

			<udp_host>192.168.1.10</udp_host>


			<!-- valid value for udp_port are:

				 0,65535 - Which port to send the udp packets.	-->

			<udp_port>1000</udp_port>


			<!-- udp_options are so you can set own loglevel/type for udp-logger:

				 Should hold level and type-tags like above. 	-->

			<udp_options>normal,init</udp_options>


			<!-- valid value for tcp_port are:

				 0,65535 - Which port to listen for incomming tcp connections.	-->

			<tcp_port>1001</tcp_port>


			<!-- tcp_options are so you can set own loglevel/type for tcp-logger:

				 Should hold level and type-tags like above. 	-->

			<tcp_options>normal,init</tcp_options>

	</debug>

	<newcamdserver>

			<!-- valid value for enabled are:

				 Yes, No - Enable or Disable newcamd server.	-->

			<enabled>Yes</enabled>


			<!-- valid value for name are:

				 Any name - Used to identify server to remote clients,

				 if the remote client isnt newcamd, this field have no purpouse.	-->

			<name>newcs</name>


			<!-- valid value for deskey are:

				 any 14x2 numbers  - Used to encrypt the communication between

				 the client and the server.	-->

			<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>


			<!-- Notes about users:

				 The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).

				 You can add as many user-sections as you want, just put them under eachother.	-->

			<user>

				<!-- valid value for userfile are:

					 Any username you'd like - Used for client to logon (its case sensitive).	-->

				<name>dummy</name>


				<!-- valid value for password are:

				    Any password you'd like - Used for client to logon (its case sensitive).	-->

				<password>dummy</password>


				<!-- valid value for hostname are:

				 	 IP-address or DNS-name - Used for reverse login to the client.	-->

				<hostname>localhost</hostname>


				<!-- valid value for port are:

				     0-65535 - Which port reverse login to the client.	-->

				<port>10000</port>


				<!-- valid value for au are:

					 On,Off - Wheather the client are allowed to send EMM to the server.	-->

				<au>on</au>


				<!-- valid value for sidoverride are:

				     On,Off - Wheather the client are allowed to override the SID-filter.	-->

				<sidoverride>off</sidoverride>


				<!-- valid value for readers are device name,

					if one <allow> present, other readers will be disabled! -->

				<readers>

					<allow>Phoenix on Com1</allow>

				</readers>


				<!-- valid value for spider are:

					 Yes,No - Wheather the client are allowed to be newcamd Cardspider.	-->

				<spider>No</spider>


                                <!-- valid value for rate are:

                                         1-60 - number of seconds between each ecm     -->

                                <rate>2</rate>


				<!-- valid value for cardlevel are:

					 1	- If its set Mgcamd will use all cards over the same port.	-->

                                <cardlevel>1</cardlevel>

			</user>

	</newcamdserver>

       </newCSconfig>

JanLuc Piccard · 2 maart 2010

In je ontvanger staat test als gebruikersnaam en in je config staat dummy als gebruikersnaam.

De regels van cardlevel eruit halen.

En probeer ook eens de autosid op NO te zetten.

JanLuc Piccard · 2 maart 2010

Oh ja je moet NewCS wel stoppen en opnieuw starten als je de newcs.xml hebt verandert.

satede · 2 maart 2010

ik gebruik poort 10000 is dit wel goed er staat 2x een poort in 1x 15050 en 1x 10000

JanLuc Piccard · 2 maart 2010

Nee die moet eruit en je moet poort 15050 gebruiken.

Puch · 2 maart 2010

Graag lange stukken code tussen de code tags plaatsen aub.

Zo voorkomen we vervorming van de forum pagina's.

satede · 3 maart 2010

Krijg nu de volgende fout melding.

type: init

output: console,tcp

logger config: level 1 type 3 output 5

Console log options: level 1 type 3

TCP log options: level 1 type 3

[ 15:33:56 ] [ Box detect ] Box type 1 (General Boxtype - Generic)

[ 15:33:56 ] [ Config ] Option <blockc0> for device 0 (Phoenix) not present, defaulting to NO

[ 15:33:56 ] [ Config ] Option <crypto-special> for device 0 (Phoenix) not present, defaulting to NO

[ 15:33:56 ] [ Config ] Pincode for device 0 (Phoenix): 0000

[ 15:33:56 ] [ Config ] /dev/ttyUSB0 ECM priority: round

[ 15:33:56 ] [ httpd ] httpd-user: newcs, password: waxhtwoord, accesslevel: admin

[ 15:33:56 ] [ EMM Cache ] Initialising dynamic Cache

[ 15:33:56 ] [ ECM Cache ] Initialising dynamic Cache

[ NewCS ] Process ID is: 8320

[ 15:33:56 ] [ Loader ] Starting Telnet on port 8081

[ 15:33:56 ] [ Loader ] Started HTTP-server on port: 8080

[ 15:33:56 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 15:33:56 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 15:33:56 ] [ Phoenix ] Setting Parity to: ODD

[ 15:33:56 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 15:33:56 ] [ Phoenix ] Setting Baud to standard 9600

[ 15:33:57 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 15:33:59 ] [ ATR ] T=14 1etu=175.01us Guardtime:17etu WWT:9600etu

[ 15:33:59 ] [ ATR ] Historical bytes: I R D E T O A C S V 4 . 1

[ 15:33:59 ] [ Loader ] Init Irdeto card

[ 15:33:59 ] [ Phoenix ] Setting Parity to: NONE

[ 15:33:59 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 15:33:59 ] [ Phoenix ] Setting Baud to custom 5713

[ 15:34:02 ] [ KeymaN ] Adding key 000000009f12c5 type 0 on Provider 000000 for caid 0622 ID=0

[ 15:34:02 ] [ KeymaN ] Adding key 00000000012f2b type 1 on Provider 000000 for caid 0622 ID=0

[ 15:34:02 ] [ KeymaN ] Adding key 00000000ffffff type 1 on Provider 000001 for caid 0622 ID=1

[ 15:34:02 ] [ KeymaN ] Skipping duplicate irdeto

[ 15:34:03 ] [ Loader ] Card 0622 on port /dev/ttyUSB0 ready

[ 15:34:03 ] [ Loader ] Starting Newcamd Server on port 15050

[ 15:34:03 ] [ Newcamd ] Newcamd thread Server started on port 15050

newcamd: main loop

[ 15:34:03 ] [ NewCS ] Ready to GO!

# [ 15:54:31 ] [ Newcamd:15050 ] User dummy logged in, client: Generic

[ 15:54:39 ] [ Newcamd ] ECM -> dummy (NOT OK) [CAID 0000] [Prov 00000000] [sID 07D5]

[ 15:54:41 ] [ Newcamd ] ECM -> dummy (NOT OK) [CAID 0000] [Prov 00000000] [sID 07D5]

[ 15:54:43 ] [ Newcamd ] ECM -> dummy (NOT OK) [CAID 0000] [Prov 00000000] [sID 07D5]

[ 15:54:45 ] [ Newcamd ] ECM -> dummy (NOT OK) [CAID 0000] [Prov 00000000] [sID 07D5]

[ 15:54:48 ] [ Newcamd ] ECM -> dummy (NOT OK) [CAID 0000] [Prov 00000000] [sID 07D5]

[ 15:54:49 ] [ Newcamd ] ECM -> dummy (NOT OK) [CAID 0000] [Prov 00000000] [sID 07D5]

JanLuc Piccard · 3 maart 2010

Deze was ook bedoelt eigenlijk voor je seca kaart.

Probeer die maar eens.

satede · 3 maart 2010

ja maar die herkend hij nu niet meer met deze newcs.xml met die andere die ik hier heb gepost werd die kaart wel herkend

JanLuc Piccard · 3 maart 2010

Jawel, maar je moet newcs eerst stoppen (killen) en dan weer starten.

satede · 3 maart 2010

ja dat heb ik ook gedaan maar hij ziet de kaart gewoon niet

Inloggen

Puppy linux installeren op een cf kaart

Aanbevolen berichten

satede

Beste reacties in dit onderwerp

Populaire dagen

Beste reacties in dit onderwerp

Populaire dagen

JanLuc Piccard

satede

JanLuc Piccard

satede

JanLuc Piccard

JanLuc Piccard

satede

JanLuc Piccard

Puch

satede

JanLuc Piccard

satede

JanLuc Piccard

satede

Maak een account aan of log in om te reageren

Account aanmaken

Inloggen

Wie is er online 0 leden

Overig

Activiteit