Puppy linux installeren op een cf kaart

[JanLuc Piccard]

Wat is dan de output, kun je die posten?

[satede]

This is NewCS 1.67 RC1 [build: 95] - the New CardServer by the Butter-team..

Compiled on Jul 14 2009 at 12:12:45

Reading Config file from /etc/newcs.xml

TCP-log password is enabled, set to: wachtwoord

TCP-log set to simple mode

level: normal

type: init

output: console,tcp

logger config: level 1 type 3 output 5

Console log options: level 1 type 3

TCP log options: level 1 type 3

[ 21:30:24 ] [ Box detect ] Box type 1 (General Boxtype - Generic)

[ 21:30:24 ] [ Config ] Option <blockc0> for device 0 (Phoenix) not present, defaulting to NO

[ 21:30:24 ] [ Config ] Option <crypto-special> for device 0 (Phoenix) not present, defaulting to NO

[ 21:30:24 ] [ Config ] Pincode for device 0 (Phoenix): 0000

[ 21:30:24 ] [ Config ] /dev/ttyUSB0 ECM priority: round

[ 21:30:24 ] [ httpd ] httpd-user: newcs, password: waxhtwoord, accesslevel: admin

[ 21:30:24 ] [ EMM Cache ] Initialising dynamic Cache

[ 21:30:24 ] [ ECM Cache ] Initialising dynamic Cache

[ NewCS ] Process ID is: 32567

[ 21:30:24 ] [ Loader ] Starting Telnet on port 8081

[ 21:30:24 ] [ Loader ] Started HTTP-server on port: 8080

[ 21:30:24 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:24 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:24 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:24 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:24 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:25 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:27 ] [ Loader ] Reset failed ...

[ 21:30:27 ] [ Loader ] Starting Newcamd Server on port 15050

[ 21:30:27 ] [ Newcamd ] Newcamd thread Server started on port 15050

newcamd: main loop

[ 21:30:27 ] [ NewCS ] Ready to GO!

# [ 21:30:27 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:27 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:27 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:27 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:27 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:28 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

# [ 21:30:29 ] [ Loader ] Reset failed ...

[ 21:30:29 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:29 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:29 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:29 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:29 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:30 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:31 ] [ Loader ] Reset failed ...

[ 21:30:31 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:31 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:31 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:31 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:31 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:32 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:33 ] [ Loader ] Reset failed ...

[ 21:30:33 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:33 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:33 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:33 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:33 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:34 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:35 ] [ Loader ] Reset failed ...

[ 21:30:35 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:35 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:35 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:35 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:35 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:36 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:37 ] [ Loader ] Reset failed ...

[ 21:30:37 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:37 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:37 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:37 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:37 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:38 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:39 ] [ Loader ] Reset failed ...

[ 21:30:39 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:39 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:39 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:39 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:39 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:40 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:41 ] [ Loader ] Reset failed ...

[ 21:30:41 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:41 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:41 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:41 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:41 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:42 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:43 ] [ Loader ] Reset failed ...

[ 21:30:43 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:43 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:43 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:43 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:43 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:44 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:45 ] [ Loader ] Reset failed ...

[ 21:30:45 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:45 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:45 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:45 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:45 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:46 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:47 ] [ Loader ] Reset failed ...

[ 21:30:47 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:47 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:47 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:47 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:47 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:48 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:49 ] [ Loader ] Reset failed ...

[ 21:30:49 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:49 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:49 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:49 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:49 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:50 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:51 ] [ Loader ] Reset failed ...

[ 21:30:51 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:51 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:51 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:51 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:51 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:52 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:53 ] [ Loader ] Reset failed ...

[ 21:30:53 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:53 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:53 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:53 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:53 ] [ Phoenix ] Setting Baud to standard 9600

[ 21:30:54 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:55 ] [ Loader ] Unknown card

[ 21:30:55 ] [ Loader ] Trying Irdeto (T=14)

[ 21:30:55 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 21:30:55 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 21:30:55 ] [ Phoenix ] Setting Parity to: ODD

[ 21:30:55 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 21:30:55 ] [ Phoenix ] Setting Baud to custom 5713

[ 21:30:56 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 21:30:57 ] [ Loader ] Unknown card

[JanLuc Piccard]

Je moet even opnieuw opstarten denk ik.

De smargo reader wordt/kan niet gereset (worden).

 

[satede]

heb de pc helemaal opnieuw opgestart maar hij geeft nog steeds hetzelfde.

[JanLuc Piccard]

Euh kaartje heb je er toch wel goed inzitten?

Want deze xml werkt.

[satede]

krijg nu dit de sab ziet de kaart wel maar geen beeld

 

This is NewCS 1.67 RC1 [build: 95] - the New CardServer by the Butter-team..

Compiled on Jul 14 2009 at 12:12:45

Reading Config file from /etc/newcs.xml

TCP-log password is enabled, set to: wachtwoord

TCP-log set to simple mode

level: normal

type: init

output: console,tcp

logger config: level 1 type 3 output 5

Console log options: level 1 type 3

TCP log options: level 1 type 3

[ 22:12:07 ] [ Box detect ] Box type 1 (General Boxtype - Generic)

[ 22:12:07 ] [ Config ] Option <blockc0> for device 0 (Phoenix) not present, defaulting to NO

[ 22:12:07 ] [ Config ] Option <crypto-special> for device 0 (Phoenix) not present, defaulting to NO

[ 22:12:07 ] [ Config ] Pincode for device 0 (Phoenix): 0000

[ 22:12:07 ] [ Config ] /dev/ttyUSB0 ECM priority: round

[ 22:12:07 ] [ httpd ] httpd-user: newcs, password: waxhtwoord, accesslevel: admin

[ 22:12:07 ] [ EMM Cache ] Initialising dynamic Cache

[ 22:12:07 ] [ ECM Cache ] Initialising dynamic Cache

[ NewCS ] Process ID is: 17315

[ 22:12:07 ] [ Loader ] Starting Telnet on port 8081

[ 22:12:07 ] [ Loader ] Started HTTP-server on port: 8080

[ 22:12:07 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 22:12:07 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 22:12:07 ] [ Phoenix ] Setting Parity to: ODD

[ 22:12:07 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 22:12:07 ] [ Phoenix ] Setting Baud to standard 9600

[ 22:12:08 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 22:12:10 ] [ Loader ] Reset failed ...

[ 22:12:10 ] [ Loader ] Starting Newcamd Server on port 15050

[ 22:12:10 ] [ Newcamd ] Newcamd thread Server started on port 15050

newcamd: main loop

[ 22:12:10 ] [ NewCS ] Ready to GO!

# [ 22:12:10 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0

[ 22:12:10 ] [ Phoenix ] Opening device /dev/ttyUSB0

[ 22:12:10 ] [ Phoenix ] Setting Parity to: ODD

[ 22:12:10 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 22:12:10 ] [ Phoenix ] Setting Baud to standard 9600

[ 22:12:11 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0

[ 22:12:12 ] [ ATR ] T=0 1etu=104.17us Guardtime:13etu WWT:144000etu

[ 22:12:12 ] [ ATR ] Historical bytes: p p 7 [0E] l [b6] [D6]

[ 22:12:12 ] [ Loader ] Init Seca card

[ 22:12:12 ] [ Phoenix ] Setting Parity to: EVEN

[ 22:12:12 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0

[ 22:12:12 ] [ Phoenix ] Setting Baud to standard 9600

[ 22:12:12 ] [ KeymaN ] Adding key 00000006005d9f type 0 on Provider 000000 for caid 0100 ID=0

[ 22:12:12 ] [ KeymaN ] Adding key 00000008380a03 type 1 on Provider 00006A for caid 0100 ID=1

[ 22:12:12 ] [ KeymaN ] Adding key 00000000000000 type 1 on Provider 00006B for caid 0100 ID=2

[ 22:12:12 ] [ KeymaN ] Adding key 00000000000000 type 1 on Provider 00006C for caid 0100 ID=3

[ 22:12:12 ] [ KeymaN ] Adding key 00000000000000 type 1 on Provider 00006D for caid 0100 ID=4

[ 22:12:12 ] [ Loader ] Card 0100 on port /dev/ttyUSB0 ready

[ 22:12:27 ] [ Newcamd:15050 ] User dummy logged in, client: Generic

[ 22:12:32 ] [ Newcamd ] recv: error! 104: Connection reset by peer

[ 22:12:32 ] [ Newcamd:15050 ] User dummy logout

[ 22:12:33 ] [ Newcamd:15050 ] User dummy logged in, client: Generic

[JanLuc Piccard]

Dit ziet er beter(der) uit.

Ben niet zo erg thuis met de sab, maar als je de server instellingen van de sab neemt moet je nou zoiets doen als poort opvoeren (ja zo noemen ze dat)

Geloof iets met de groene toets.

[satede]

ja dat heb ik ook gedaan, anders connect hij niet eens met server. Zoals je kan zien logd de sab wel gewoon in.

Zal vanavond anders eens met de Azbox proberen.

[satede]

nou ik begin het een beetje zat te worden als ik met de azbox connect naar de newcs server dan stopt de server er mee, dan moet ik hem weer opnieuw starten.

Ik denk dat ik toch verder ga met CCcam volgens mij moet dat beter werken.

Heb jij een goed werkende CCcam.cfg ? en als ik de CCcam server opgestart heb hoe kan ik dan zien wie er geconnect zijn ?

[JanLuc Piccard]

Ik heb vandaag nog even een sab getest heb geen probleem ondervonden en heb gewoon beeld. Werkt prima bij mij.

 

cccam heeft ook een webinterface, daarin kun je het zien.

Je moet denk ik heel basic beginnen met je cfg en dan later verder uitbreiden.

 

Ik stuur je zo even een cfg

[satede]

heb nu versie 1.65 geprobeerd en deze werkt wel.

Dus dat werkt nu ook.

Maar nu wil ik eerst een CCcam server installeren want dan kan je toch ook zien naar welke zenders de clients kijken ?

[JanLuc Piccard]

Nee, dat niet.

Je kunt zien dat ze zijn ingelogt en voor hoelang.

[satede]

oke, ik dacht dat ik dat een keer had gezien bij iemand.

Maar ik zit nu even te kijken maar als ik met de sab op een zender zit die niet met de kaart open gaat dan loopt de bad ecm hard op, kan ik hier wat aan doen ?

[JanLuc Piccard]

Ja en nee.

Ja door je abbo uit te breiden.

Nee, maar dat hoort ook zo te zijn.

 

[JanLuc Piccard]

Trouwens in de sid lijst kun je wel zien welke sid werken en welke niet.

Hieruit kun je wel zien welke sid's worden gebruikt.

Ik heb het nu over newcs.