VDR +disqc.conf

[Earthfinder]

Zoals misschien bekend is, gebruik ik inmiddels yaVDR 0.3.

Ik moet alleen nog de puntjes op de 'i' zetten.

 

Ik krijg geen signaal van Astra 23.5. Wellicht iets in mijn diseqc.conf, staat hieronder.

Ik heb alle varianten die in de file staan reeds geprobeerd, maar helaas zonder succes.

 

Ik gebruik twee LNB's met een diseqc 2/1 switch er tussen. Die werkt onder Win7 en met een reguliere sat-ontvanger prima.

 

Mijn diseqc.conf:

------------------------------------------------------------

# DiSEqC configuration for VDR

#

# Format:

#

# satellite slof polarization lof command...

#

# satellite: one of the 'S' codes defined in sources.conf

# slof: switch frequency of LNB; the first entry with

# an slof greater than the actual transponder

# frequency will be used

# polarization: V = vertical, H = horizontal

# lof: the local oscillator frequency to subtract from

# the actual transponder frequency

# command:

# t tone off

# T tone on

# v voltage low (13V)

# V voltage high (18V)

# A mini A

# B mini B

# Wnn wait nn milliseconds (nn may be any positive integer number)

# [xx ...] hex code sequence (max. 6)

#

# The 'command...' part is optional.

#

# Examples:

#

# Full DiSEqC sequence for DiSEqC switch:

#

# port 1

S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W100 [E0 10 38 F0] W100 [E0 11 00] W100 A W15 t

S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W100 [E0 10 38 F1] W100 [E0 11 00] W100 A W15 T

S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W100 [E0 10 38 F2] W100 [E0 11 00] W100 A W15 t

S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W100 [E0 10 38 F3] W100 [E0 11 00] W100 A W15 T

# port 2

S23.5E 11700 V 9750 t v W15 [E0 10 38 F4] W100 [E0 10 38 F8] W100 [E0 11 00] W100 B W15 t

S23.5E 99999 V 10600 t v W15 [E0 10 38 F5] W100 [E0 10 38 F9] W100 [E0 11 00] W100 B W15 T

S23.5E 11700 H 9750 t V W15 [E0 10 38 F6] W100 [E0 10 38 FA] W100 [E0 11 00] W100 B W15 t

S23.5E 99999 H 10600 t V W15 [E0 10 38 F7] W100 [E0 10 38 FB] W100 [E0 11 00] W100 B W15 T

#

# Optimized for mini DiSEqC (aka toneburst):

#

# S19.2E 11700 V 9750 t v W15 A W15 t

# S19.2E 99999 V 10600 t v W15 A W15 T

# S19.2E 11700 H 9750 t V W15 A W15 t

# S19.2E 99999 H 10600 t V W15 A W15 T

#

# S23.5E 11700 V 9750 t v W15 B W15 t

# S23.5E 99999 V 10600 t v W15 B W15 T

# S23.5E 11700 H 9750 t V W15 B W15 t

# S23.5E 99999 H 10600 t V W15 B W15 T

#

# Optimized for full DiSEqC:

#

# S19.2E 11700 V 9750 v [E0 10 38 F0]

# S19.2E 99999 V 10600 v [E0 10 38 F1]

# S19.2E 11700 H 9750 V [E0 10 38 F2]

# S19.2E 99999 H 10600 V [E0 10 38 F3]

#

# S23.5E 11700 V 9750 v [E0 10 38 F4]

# S23.5E 99999 V 10600 v [E0 10 38 F5]

# S23.5E 11700 H 9750 V [E0 10 38 F6]

# S23.5E 99999 H 10600 V [E0 10 38 F7]

#

# S19.2E 11700 V 9750 t v W15 [E0 10 38 F4] W15 A W15 t

# S19.2E 99999 V 10600 t v W15 [E0 10 38 F5] W15 A W15 T

# S19.2E 11700 H 9750 t V W15 [E0 10 38 F6] W15 A W15 t

# S19.2E 99999 H 10600 t V W15 [E0 10 38 F7] W15 A W15 T

#

# S13.0E 11700 V 9750 t v W15 [E0 10 38 F0] W15 B W15 t

# S13.0E 99999 V 10600 t v W15 [E0 10 38 F1] W15 B W15 T

# S13.0E 11700 H 9750 t V W15 [E0 10 38 F2] W15 B W15 t

# S13.0E 99999 H 10600 t V W15 [E0 10 38 F3] W15 B W15 T

------------------------------------------------------------

[RobbieT]

Ik denk dat voor jou de configuratie zoiets moet zijn:

 

# ---------------------

# | 2-port switch |-- to receiver

# ---------------------

# 1 2

# | |

# 19.2E 23.5E

# LNB LNB

#

#22 Position A

#23 Option A

#26 Position B

#27 Option B

# port 1 option a position a

# port 2 option a position b

# port 3 option b position a

# port 4 option b position b

 

# port 1

S19.2E 11700 V 9750 t v W15 [E0 10 23] W15 [E0 10 22] W15 t

S19.2E 99999 V 10600 t v W15 [E0 10 23] W15 [E0 10 22] W15 T

S19.2E 11700 H 9750 t V W15 [E0 10 23] W15 [E0 10 22] W15 t

S19.2E 99999 H 10600 t V W15 [E0 10 23] W15 [E0 10 22] W15 T

# port 2

S23.5E 11700 V 9750 t v W15 [E0 10 23] W15 [E0 10 26] W15 t

S23.5E 99999 V 10600 t v W15 [E0 10 23] W15 [E0 10 26] W15 T

S23.5E 11700 H 9750 t V W15 [E0 10 23] W15 [E0 10 26] W15 t

S23.5E 99999 H 10600 t V W15 [E0 10 23] W15 [E0 10 26] W15 T

[Niels Wagenaar]

Volgens mij moet dit werken:

 

Code:

S19.2E  11700 V  9750  t v W15 [E0 10 38 F0] W15 A W15 tS19.2E  99999 V 10600  t v W15 [E0 10 38 F1] W15 A W15 TS19.2E  11700 H  9750  t V W15 [E0 10 38 F2] W15 A W15 tS19.2E  99999 H 10600  t V W15 [E0 10 38 F3] W15 A W15 TS23.5E  11700 V  9750  t v W15 [E0 10 38 F4] W15 B W15 tS23.5E  99999 V 10600  t v W15 [E0 10 38 F5] W15 B W15 TS23.5E  11700 H  9750  t V W15 [E0 10 38 F6] W15 B W15 tS23.5E  99999 H 10600  t V W15 [E0 10 38 F7] W15 B W15 T

 

Mogelijk dat je S19.2E en S23.5E moet omwisselen. En je moet ook nog diseqc aanzetten binnen VDR.

 

Mvg,

 

Niels Wagenaar

[RobbieT]

Dat zou zijn:

 

sudo nano /etc/vdr/setup.conf

DiSEqC = 0

veranderen in:

DiSEqC = 1

 

[Earthfinder]

Mijn dank aan allen.

Het laatste was het, dat van RobbieT.

Merci!