djmistral Geplaatst: 7 november 2011 Geplaatst: 7 november 2011 Ben reeds enkele weken aan het testen met OsCam, Sasc-ng op een linux kernel 2.6.38 (Ubuntu 11.04). Ik heb een WinTV Nova-T stick en een Smargo smartreader+ met Digitenne smartcard. De OsCam-server draai ik als een VM op mijn IMac (192.168.50.10) en dat draait als een zonnetje. Verder heb ik een losse testcomputer waar ik Mythbuntu op heb draaien (11.04) Ik heb deze tuto gevolgd: http://www.vanbest.org/drupal6/content/installing-sasc-ng-linux-2.6.38 Dus kernel is gepatched. Een beetje research heeft mij geleerd dat de nieuwste versie van sasc-ng niet meer hoeft te worden gepatched. Builden van sasc-ng gaat ook prima, met en zonder de patch. Toch krijg ik met geen mogelijkheid de betaaldzenders aan de praat. Sterker nog, sasc-ng lijkt niet eens gebruik te maken van mijn oscam-server wanneer ik met tzap afstem op bijvoorbeeld Discovery channel. (Ik heb met scan al een channels.conf gemaakt) Als sasc-ng opstart zie ik wel dat er succesvol wordt ingelogd op OsCam, maar er worden na het afstemmen met tzap geen key's uitgewisseld. De log van OsCam ziet er als volgt uit: ------------------------------------------------------------------------------- >> OSCam << cardserver started at Tue Oct 18 18:44:56 2011 ------------------------------------------------------------------------------- 2011/10/18 18:44:56 14987 s version=1.00, build #6014, system=i686-pc-linux, nice=1 2011/10/18 18:44:56 14987 s max. clients=509, client max. idle=120 sec 2011/10/18 18:44:56 14987 s max. logsize=unlimited 2011/10/18 18:44:56 14987 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms 2011/10/18 18:44:56 14987 s shared memory initialized (size=4342154, id=1114112) 2011/10/18 18:44:56 14987 s auth size=4772 2011/10/18 18:44:56 14987 s services reloaded: 0 services freed, 1 services loaded 2011/10/18 18:44:56 14987 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled 2011/10/18 18:44:56 14987 s signal handling initialized (type=sysv) 2011/10/18 18:44:56 14987 s can't open file "/etc/oscam/oscam.srvid" (err=2), no service-id's loaded 2011/10/18 18:44:56 14987 s can't open file "/etc/oscam/oscam.tiers" (err=2), no tier-id's loaded 2011/10/18 18:44:56 14987 s can't open file "/etc/oscam/oscam.provid" (err=2), no provids's loaded 2011/10/18 18:44:56 14987 s monitor: initialized (fd=7, port=988) 2011/10/18 18:44:56 14987 s camd 3.3x: disabled 2011/10/18 18:44:56 14987 s camd 3.5x: disabled 2011/10/18 18:44:56 14987 s cs378x: disabled 2011/10/18 18:44:56 14987 s newcamd: initialized (fd=8, port=15000, crypted) 2011/10/18 18:44:56 14987 s CAID: 0B00 2011/10/18 18:44:56 14987 s provid #0: 00E030 2011/10/18 18:44:56 14987 s cccam: disabled 2011/10/18 18:44:56 14987 s radegast: disabled 2011/10/18 18:44:56 14987 s logger started (pid=14988) 2011/10/18 18:44:56 14987 s http started (pid=14989) 2011/10/18 18:44:56 14987 s reader started (pid=14990, device=002:007, detect=cd, mhz=357, cardmhz=357) 2011/10/18 18:44:56 14987 s waiting for local card init 2011/10/18 18:44:56 14989 h HTTP Server listening on port 8888 2011/10/18 18:44:56 14990 r02 Found smartreader device 002:007 2011/10/18 18:44:56 14990 r02 card detected 2011/10/18 18:44:57 14990 r02 ATR: 3B 24 00 30 42 30 30 2011/10/18 18:44:57 14990 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz 2011/10/18 18:44:59 14990 r02 type: Conax, caid: 0B00, serial: 1430263278, hex serial: 554015ee, card: v64 2011/10/18 18:44:59 14990 r02 Providers: 1 2011/10/18 18:44:59 14990 r02 Provider: 1 Provider-Id: 000000 2011/10/18 18:44:59 14990 r02 Provider: 1 SharedAddress: 002AA00A 2011/10/18 18:44:59 14990 r02 Package: 1, id: 1010, date: 2011/11/01 - 2011/11/30, name: Digitenne 2011/10/18 18:44:59 14990 r02 [conax-reader] ready for requests 2011/10/18 18:44:59 14987 s init for all local cards done 2011/10/18 18:44:59 14987 s anti cascading disabled 2011/10/18 18:44:59 14987 s dvbapi: dvbapi disabled 2011/10/18 18:45:42 14987 s client(1) connect from 192.168.50.150 (pid=14992, pipfd=14) 2011/10/18 18:45:42 14992 c01 encrypted newcamd:15000-client 192.168.50.150 granted (test, au(auto)=mysmartreader) 2011/10/18 18:45:42 14992 c01 user test authenticated successfully (generic) 2011/10/18 18:45:42 14992 c01 AU enabled for user test on reader mysmartreader De log van sasc-ng root@dolf-K7S41GX:~# sasc-ng -j 0:1 --cam-budget --sid-allpid --sid-nocache --cam-dir=/etc/camfiles --buffer 8M Nov 7 23:00:52.731 : Version: 0.0.2-442eee2f550d+ Nov 7 23:00:52.732 CAM: initializing plugin: SoftCam (1.0.0pre-HG-442eee2f550d+): A software emulated CAM Nov 7 23:00:52.732 CAM(general.info): SC version 1.0.0pre-HG-442eee2f550d+ initializing (VDR 1.6.0) Nov 7 23:00:52.732 CAM: starting plugin: Nov 7 23:00:52.732 CAM(general.info): SC version 1.0.0pre-HG-442eee2f550d+ starting (VDR 1.6.0) Nov 7 23:00:52.732 CAM(core.load): ** Plugin config: Nov 7 23:00:52.732 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart) Nov 7 23:00:52.732 CAM(core.load): ** Local systems DON'T take priority over cached remote Nov 7 23:00:52.732 CAM(core.load): ** Concurrent FF recordings are NOT allowed Nov 7 23:00:52.732 CAM(core.load): ** Force transfermode with digital audio Nov 7 23:00:52.732 CAM(core.load): ** ECM cache is set to enabled Nov 7 23:00:52.732 CAM(core.load): ** TsBufferSize is 4 MB Nov 7 23:00:52.732 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0 Nov 7 23:00:52.732 CAM(general.error): failed open /etc/camfiles/override.conf: No such file or directory Nov 7 23:00:52.732 CAM(general.error): failed open /etc/camfiles/smartcard.conf: No such file or directory Nov 7 23:00:52.732 CAM(general.error): failed open /etc/camfiles/cardslot.conf: No such file or directory Nov 7 23:00:52.732 CAM(general.error): failed open /etc/camfiles/SoftCam.Key: No such file or directory Nov 7 23:00:52.732 CAM(general.info): loading cardclient config from /etc/camfiles/cardclient.conf Nov 7 23:00:52.733 CAM(cardclient.newcamd): now using protocol version 525 (cdLen=8) Nov 7 23:00:52.733 CAM(cardclient.core): hostname=192.168.50.10 port=15000 emm=1 emmCaids 0b00/ff00 Nov 7 23:00:52.733 CAM(cardclient.core): Newcamd: username=test password=test key=000102030405060708090A0B0C0D Nov 7 23:00:52.733 CAM(cardclient.core): client 'Newcamd' ready Nov 7 23:00:52.734 CAM(core.net): connecting to 192.168.50.10:15000/tcp (192.168.50.10) Nov 7 23:00:52.745 CAM(cardclient.login): Newcamd: CaID=0b00 admin=1 srvUA=00000000554015EE provider 00E030/0000000000000000 000000/00000000002AA00A Nov 7 23:00:52.745 CAM(general.error): no keys loaded for softcam! Nov 7 23:00:52.745 CAM(core.load): ** registered systems: Nov 7 23:00:52.745 CAM(core.load): ** Viaccess (pri -10) Nov 7 23:00:52.746 CAM(core.load): ** Seca (pri -10) Nov 7 23:00:52.746 CAM(core.load): ** SC-VideoGuard2 (pri -5) Nov 7 23:00:52.746 CAM(core.load): ** SC-Viaccess (pri -5) Nov 7 23:00:52.746 CAM(core.load): ** SC-Seca (pri -5) Nov 7 23:00:52.746 CAM(core.load): ** SC-Nagra (pri -5) Nov 7 23:00:52.746 CAM(core.load): ** SC-Irdeto (pri -5) Nov 7 23:00:52.746 CAM(core.load): ** SC-Cryptoworks (pri -5) Nov 7 23:00:52.746 CAM(core.load): ** SC-Conax (pri -5) Nov 7 23:00:52.746 CAM(core.load): ** Fake-NDS (pri -12) Nov 7 23:00:52.746 CAM(core.load): ** Nagra2 (pri -10) Nov 7 23:00:52.746 CAM(core.load): ** Nagra (pri -10) Nov 7 23:00:52.746 CAM(core.load): ** Irdeto2 (pri -8) Nov 7 23:00:52.746 CAM(core.load): ** Irdeto (pri -10) Nov 7 23:00:52.746 CAM(core.load): ** Cryptoworks (pri -10) Nov 7 23:00:52.746 CAM(core.load): ** ConstCW (pri -20) Nov 7 23:00:52.746 CAM(core.load): ** Conax (pri -10) Nov 7 23:00:52.746 CAM(core.load): ** Cardclient (pri -15) Nov 7 23:00:53.823 dvr: Starting thread on /dev/dvb/adapter1/dvr1 The thread scheduling parameters indicate: policy = 1 priority = 99 Nov 7 23:00:53.824 frontend: Starting thread on /dev/dvb/adapter1/frontend1 The thread scheduling parameters indicate: policy = 0 priority = 0 Nov 7 23:00:53.909 demux: Starting thread on /dev/dvb/adapter1/demux1 The thread scheduling parameters indicate: policy = 0 priority = 0 Nov 7 23:00:53.910 : Listening on port 5456 Nov 7 23:02:00.477 CHANNEL: Tuning frontend Nov 7 23:02:00.477 CSA: Got command(1): I idx: 0 pid: 0 tzap root@dolf-K7S41GX:~# tzap -c /var/channels.conf -a 1 -r 'Discovery Channel' using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' reading channels from file '/var/channels.conf' tuning to 754000000 Hz video pid 0x0bf5, audio pid 0x0bf6 status 0f | signal 7279 | snr 0083 | ber 001fffff | unc 0000028f | status 1f | signal 7255 | snr 008b | ber 000449a0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 717c | snr 008b | ber 0004d9d0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 72e2 | snr 008e | ber 0002aa30 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7294 | snr 0090 | ber 00021990 | unc 00000000 | FE_HAS_LOCK status 1f | signal 722b | snr 008b | ber 0002b910 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7216 | snr 008e | ber 000289d0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 71d8 | snr 0088 | ber 00025ab0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 71d3 | snr 008b | ber 00028bd0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 71b1 | snr 0089 | ber 0002bfd0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7142 | snr 008a | ber 0002fd50 | unc 00000000 | FE_HAS_LOCK status 1f | signal 700d | snr 0087 | ber 00064bf0 | unc 00000008 | FE_HAS_LOCK status 1f | signal 7138 | snr 008c | ber 0002f520 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7140 | snr 008b | ber 00040010 | unc 00000000 | FE_HAS_LOCK status 1f | signal 711e | snr 008e | ber 00034470 | unc 00000000 | FE_HAS_LOCK status 1f | signal 705d | snr 008d | ber 0004fb30 | unc 00000001 | FE_HAS_LOCK status 1f | signal 70d2 | snr 0090 | ber 0003fac0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 714b | snr 008e | ber 00038510 | unc 00000000 | FE_HAS_LOCK status 1f | signal 719b | snr 008e | ber 0002a3d0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7181 | snr 0091 | ber 00027e30 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7156 | snr 0087 | ber 000266a0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 717e | snr 008d | ber 00029930 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7182 | snr 008f | ber 0002eda0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7158 | snr 0090 | ber 00029460 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7139 | snr 0093 | ber 0002b150 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7128 | snr 008f | ber 00029b20 | unc 00000000 | FE_HAS_LOCK status 1f | signal 701d | snr 008f | ber 0002e3f0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 6fe8 | snr 008b | ber 00043db0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 7018 | snr 008a | ber 00045e90 | unc 00000000 | FE_HAS_LOCK status 1f | signal 70f9 | snr 008d | ber 00025da0 | unc 00000000 | FE_HAS_LOCK status 1f | signal 6fc7 | snr 0091 | ber 00048a60 | unc 00000005 | FE_HAS_LOCK status 1f | signal 6fe6 | snr 008f | ber 000413b0 | unc 00000000 | FE_HAS_LOCK Na een tijdje geeft sasc-ng aan dat de verbinding met Oscam te lang 'Idle' is en wordt deze afgesloten. Nov 7 23:02:52.747 CAM(core.net): idle timeout, disconnected 192.168.50.10:15000 OsCam bevestigt 2011/10/18 18:47:42 14992 c01 Connection closed to client 2011/10/18 18:47:42 14992 c01 test disconnected from 192.168.50.150 Na de mislukte poging wil ik sasc-ng afsluiten met ctrl-c, maar dit lukt niet meer Nov 7 23:00:53.910 : Listening on port 5456 Nov 7 23:02:00.477 CHANNEL: Tuning frontend Nov 7 23:02:00.477 CSA: Got command(1): I idx: 0 pid: 0 Nov 7 23:02:32.483 CSA: Got command(1): I idx: 0 pid: 0 Nov 7 23:02:52.747 CAM(core.net): idle timeout, disconnected 192.168.50.10:15000 ^C en sasc-ng blijft dan hangen. Opvallend is de melding in /var/log/syslog Nov 7 22:20:49 dolf-K7S41GX kernel: [ 5835.640101] dvblb_fake_ioctl interrupted: 6 Nov 7 22:20:49 dolf-K7S41GX kernel: [ 5835.640490] dvbloopback: Got wrong response (6 != 5) Nov 7 22:23:06 dolf-K7S41GX kernel: [ 5972.188037] dvblb_fake_ioctl interrupted: 6 Mijn opties raken een heel eind op, maar er zijn hier vast mensen die mij weer op weg kunnen helpen.
Lamko Geplaatst: 8 november 2011 Geplaatst: 8 november 2011 Fta kanalen zoals Ned. 1 geven die wel beeld op adapter1? En die laatste melding in je syslog zou mij bijna zeggen dat dvbloopback gewoon niet goed werkt maar dat kun je uitsluiten door te kijken of Ned. 1 werkt! Mythbuntu 12.04 Celeron 220 op Mini-ITX D201GLY2, 1 GB Ram,2x1,5 TB HDD, Digitenne op TerraTec Cinergy, CCcam
djmistral Geplaatst: 8 november 2011 Auteur Geplaatst: 8 november 2011 Dat is het bizarre. Ned 1, 2, 3 en de lokale omroep werken wel via sasc-ng. Het lijkt dus alsof sasc-ng alle stromen als FTA afhandelt. Blijft het natuurlijk vreemd dat sasc-ng 'crashed'. Ook na het kijken van ned123. Eerlijkheidshalve moet ik zeggen dat ik tijdens het testen van die zenders niet naar de syslog heb gekeken. Ga ik vanavond doen en ik post de resultaten.
djmistral Geplaatst: 9 november 2011 Auteur Geplaatst: 9 november 2011 (aangepast) Even getest en er worden geen noemenswaardige meldingen gegeven die iets met sasc-ng te maken hebben. Het blijft vooralsnog een mysterie wat ik er aan kan doen. Ik zat ook nog te denken aan het pad naar de drivers als ik voor sasc-ng "./configure --dvb-dir=/home/user/src/linux-2.6-2.6.38". Hiervoor heb ik het pad van de gepatchte sources gepakt, maar dan wel de kernel headers. Had ik daar misschien niet naar de headers moeten wijzen, maar gewoon naar de sources van die gepatchte kernel? 9 november 2011 aangepast door djmistral
Lamko Geplaatst: 9 november 2011 Geplaatst: 9 november 2011 Klopt, de headers zijn niet genoeg je zult de gepatchte source moeten gebruiken. Die foutmelding duidt hier ook op. Ik had namelijk al ongeveer zo'n vermoeden voordat je hier over begon, al verbaasde het mij dat hij het wel even deed. Mythbuntu 12.04 Celeron 220 op Mini-ITX D201GLY2, 1 GB Ram,2x1,5 TB HDD, Digitenne op TerraTec Cinergy, CCcam
djmistral Geplaatst: 11 november 2011 Auteur Geplaatst: 11 november 2011 Sorry dat ik even niet reageerde. Morgen ben ik in de gelegenheid om dit te testen en post ik mijn resultaten. Zowiezo, als het aan de praat is wil ik best een tuto posten op dit forum. Zou daar behoefte aan zijn?
Lamko Geplaatst: 11 november 2011 Geplaatst: 11 november 2011 Als je met de tuto vooral de goede dingen van mythtv kunt benadrukken zodat daar wat meer vraag naar is komt sasc-ng vanzelf wel. Voor sasc-ng gebruik ik zelfaltijd deze tut : http://dolot.kipdola.com/wiki/Install_SASC-NG voor de nieuwere kernels heb je dus alleen de mutex als extra patch nodig. Mythbuntu 12.04 Celeron 220 op Mini-ITX D201GLY2, 1 GB Ram,2x1,5 TB HDD, Digitenne op TerraTec Cinergy, CCcam
djmistral Geplaatst: 13 november 2011 Auteur Geplaatst: 13 november 2011 (aangepast) Sasc-ng opnieuw gecompiled, maar nu met de optie "--dvb-dir=/usr/src/linux". Dit is de map met de huidige kernel-sources erin. (Dat is dus de gepatchte versie) Alles weer opnieuw geinstalleerd en opgestart. Heb nog eens met Tzap op Discovery Channel afgestemd, maar nu met de logging mask op 0xffffffff. Ik denk dat hier duidelijk uit op te maken is waar het probleem zit. Klopt dat? root@dolf-K7S41GX:~# sasc-ng -j 0:1 --cam-budget --sid-allpid --sid-nocache --cam-dir=/etc/camfiles --debug 0xffffffff Nov 13 08:55:10.407 : Version: 0.0.2-442eee2f550d+ Nov 13 08:55:10.407 CAM: initializing plugin: SoftCam (1.0.0pre-HG-442eee2f550d+): A software emulated CAM Nov 13 08:55:10.407 CAM(general.info): SC version 1.0.0pre-HG-442eee2f550d+ initializing (VDR 1.6.0) Nov 13 08:55:10.407 CAM: starting plugin: Nov 13 08:55:10.407 CAM(general.info): SC version 1.0.0pre-HG-442eee2f550d+ starting (VDR 1.6.0) Nov 13 08:55:10.407 CAM(core.load): ** Plugin config: Nov 13 08:55:10.407 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart) Nov 13 08:55:10.408 CAM(core.load): ** Local systems DON'T take priority over cached remote Nov 13 08:55:10.408 CAM(core.load): ** Concurrent FF recordings are NOT allowed Nov 13 08:55:10.408 CAM(core.load): ** Force transfermode with digital audio Nov 13 08:55:10.408 CAM(core.load): ** ECM cache is set to enabled Nov 13 08:55:10.408 CAM(core.load): ** TsBufferSize is 4 MB Nov 13 08:55:10.408 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0 Nov 13 08:55:10.427 CAM(general.error): failed open /etc/camfiles/override.conf: No such file or directory Nov 13 08:55:10.428 CAM(general.error): failed open /etc/camfiles/smartcard.conf: No such file or directory Nov 13 08:55:10.428 CAM(general.error): failed open /etc/camfiles/cardslot.conf: No such file or directory Nov 13 08:55:10.428 CAM(general.error): failed open /etc/camfiles/SoftCam.Key: No such file or directory Nov 13 08:55:10.428 CAM(general.info): loading cardclient config from /etc/camfiles/cardclient.conf Nov 13 08:55:10.449 CAM(cardclient.newcamd): now using protocol version 525 (cdLen=8) Nov 13 08:55:10.449 CAM(cardclient.core): hostname=192.168.50.10 port=15000 emm=1 emmCaids 0b00/ff00 Nov 13 08:55:10.449 CAM(cardclient.core): Newcamd: username=test password=test key=000102030405060708090A0B0C0D Nov 13 08:55:10.449 CAM(cardclient.core): client 'Newcamd' ready Nov 13 08:55:10.450 CAM(core.net): connecting to 192.168.50.10:15000/tcp (192.168.50.10) Nov 13 08:55:30.475 CAM(core.net): socket: select timed out (20000 ms) Nov 13 08:55:30.476 CAM(cardclient.newcamd): no connect answer from 192.168.50.10:15000 Nov 13 08:55:30.476 CAM(general.error): no keys loaded for softcam! Nov 13 08:55:30.476 CAM(core.load): ** registered systems: Nov 13 08:55:30.476 CAM(core.load): ** Viaccess (pri -10) Nov 13 08:55:30.476 CAM(core.load): ** Seca (pri -10) Nov 13 08:55:30.476 CAM(core.load): ** SC-VideoGuard2 (pri -5) Nov 13 08:55:30.476 CAM(core.load): ** SC-Viaccess (pri -5) Nov 13 08:55:30.476 CAM(core.load): ** SC-Seca (pri -5) Nov 13 08:55:30.476 CAM(core.load): ** SC-Nagra (pri -5) Nov 13 08:55:30.476 CAM(core.load): ** SC-Irdeto (pri -5) Nov 13 08:55:30.476 CAM(core.load): ** SC-Cryptoworks (pri -5) Nov 13 08:55:30.476 CAM(core.load): ** SC-Conax (pri -5) Nov 13 08:55:30.476 CAM(core.load): ** Fake-NDS (pri -12) Nov 13 08:55:30.476 CAM(core.load): ** Nagra2 (pri -10) Nov 13 08:55:30.476 CAM(core.load): ** Nagra (pri -10) Nov 13 08:55:30.476 CAM(core.load): ** Irdeto2 (pri -8) Nov 13 08:55:30.476 CAM(core.load): ** Irdeto (pri -10) Nov 13 08:55:30.476 CAM(core.load): ** Cryptoworks (pri -10) Nov 13 08:55:30.476 CAM(core.load): ** ConstCW (pri -20) Nov 13 08:55:30.476 CAM(core.load): ** Conax (pri -10) Nov 13 08:55:30.476 CAM(core.load): ** Cardclient (pri -15) Nov 13 08:55:30.477 CSA: Setting state: NOT_ENCRYPTED Nov 13 08:55:31.495 demux: Starting thread on /dev/dvb/adapter1/demux1 The thread scheduling parameters indicate: policy = 0 priority = 0 Nov 13 08:55:31.496 frontend: Starting thread on /dev/dvb/adapter1/frontend1 The thread scheduling parameters indicate: policy = 0 priority = 0 Nov 13 08:55:31.497 dvr: Starting thread on /dev/dvb/adapter1/dvr1 The thread scheduling parameters indicate: policy = 1 priority = 99 Nov 13 08:55:31.497 : Listening on port 5456 Nov 13 08:55:34.786 frontend: Got custom command: 0 Nov 13 08:55:34.787 frontend: Opened fd: 0=9 mode: 100002 Nov 13 08:55:34.787 frontend: Got command 61 (size: 176) Nov 13 08:55:34.805 frontend: ioctl on (9) returned: 0 Nov 13 08:55:34.805 : FE_GET_INFO(9): 'DiBcom 7000PC' min:45000000 max:860000000 step:62500 tol:0 minsr:0 maxsr:0 tolsr:0 Nov 13 08:55:34.805 frontend: Got command 76 (size: 44) Nov 13 08:55:34.805 frontend: ioctl on (9) returned: 0 Nov 13 08:55:34.805 CHANNEL: Tuning frontend Nov 13 08:55:34.805 : FE_SET_FRONTEND(9): freq: 754000000 inv: AUTO QPSK: sr: 0 fec: 2 Nov 13 08:55:34.805 CAM: Got MSG_RESETSID Nov 13 08:55:34.806 CSA: Got command(1): I idx: 0 pid: 0 [b]Nov 13 08:55:34.806 CSA: Setting state: NOT_ENCRYPTED[/b] Nov 13 08:55:34.806 demux: Got custom command: 0 Nov 13 08:55:34.806 demux: Opened fd: 0=10 mode: 100002 Nov 13 08:55:34.806 demux: Got command 45 (size: 12) Nov 13 08:55:34.806 demux: ioctl on (10) returned: 0 Nov 13 08:55:34.806 : DMX_SET_BUFFER_SIZE(10): 65536 Nov 13 08:55:34.806 demux: Got command 44 (size: 28) Nov 13 08:55:34.810 demux: ioctl on (10) returned: 0 Nov 13 08:55:34.810 CHANNEL: Sending PID: 3061 Nov 13 08:55:34.810 : DMX_SET_PES_FILTER(10): pid:3061 in:FRONTEND out:TS_TAP type:VIDEO flags: IMMEDIATE_START Nov 13 08:55:34.810 demux: Got custom command: 0 Nov 13 08:55:34.810 demux: Opened fd: 1=11 mode: 100002 Nov 13 08:55:34.810 demux: Got command 45 (size: 12) Nov 13 08:55:34.810 demux: ioctl on (11) returned: 0 Nov 13 08:55:34.810 : DMX_SET_BUFFER_SIZE(11): 65536 Nov 13 08:55:34.810 demux: Got command 44 (size: 28) Nov 13 08:55:34.810 demux: ioctl on (11) returned: 0 Nov 13 08:55:34.810 CHANNEL: Sending PID: 3062 Nov 13 08:55:34.810 : DMX_SET_PES_FILTER(11): pid:3062 in:FRONTEND out:TS_TAP type:AUDIO flags: IMMEDIATE_START Nov 13 08:55:34.811 frontend: Got command 69 (size: 12) Nov 13 08:55:34.811 CHANNEL: Got Start! Nov 13 08:55:35.449 frontend: ioctl on (9) returned: 0 Nov 13 08:55:35.449 : FE_READ_STATUS(9): SIGNAL CARRIER SYNC LOCK Nov 13 08:55:35.449 frontend: Got command 69 (size: 12) Nov 13 08:55:35.450 frontend: ioctl on (9) returned: 0 Nov 13 08:55:35.450 : FE_READ_STATUS(9): SIGNAL CARRIER SYNC LOCK Nov 13 08:55:35.451 frontend: Got command 71 (size: 12) Nov 13 08:55:35.452 frontend: ioctl on (9) returned: 0 Nov 13 08:55:35.452 : FE_READ_SIGNAL_STRENGTH(9): 22294 Nov 13 08:55:35.452 frontend: Got command 72 (size: 12) Nov 13 08:55:35.455 frontend: ioctl on (9) returned: 0 Nov 13 08:55:35.455 : FE_READ_SNR(9): 62 Nov 13 08:55:35.455 frontend: Got command 70 (size: 12) Nov 13 08:55:35.458 frontend: ioctl on (9) returned: 0 Nov 13 08:55:35.458 : FE_READ_BER(9): 2097151 Nov 13 08:55:35.458 frontend: Got command 73 (size: 12) Nov 13 08:55:35.459 frontend: ioctl on (9) returned: 0 Nov 13 08:55:35.459 : FE_READ_UNCORRECTED_BLOCKS(9): 0 Nov 13 08:55:36.460 frontend: Got command 69 (size: 12) Nov 13 08:55:36.461 frontend: ioctl on (9) returned: 0 Nov 13 08:55:36.461 : FE_READ_STATUS(9): SIGNAL CARRIER SYNC LOCK Nov 13 08:55:36.461 frontend: Got command 69 (size: 12) Nov 13 08:55:36.463 frontend: ioctl on (9) returned: 0 Nov 13 08:55:36.463 : FE_READ_STATUS(9): SIGNAL CARRIER SYNC LOCK Nov 13 08:55:36.463 frontend: Got command 71 (size: 12) Nov 13 08:55:36.464 frontend: ioctl on (9) returned: 0 Nov 13 08:55:36.464 : FE_READ_SIGNAL_STRENGTH(9): 22300 Nov 13 08:55:36.464 frontend: Got command 72 (size: 12) Nov 13 08:55:36.467 frontend: ioctl on (9) returned: 0 Nov 13 08:55:36.467 : FE_READ_SNR(9): 69 Nov 13 08:55:36.467 frontend: Got command 70 (size: 12) Nov 13 08:55:36.470 frontend: ioctl on (9) returned: 0 Nov 13 08:55:36.470 : FE_READ_BER(9): 2097151 Nov 13 08:55:36.470 frontend: Got command 73 (size: 12) Nov 13 08:55:36.471 frontend: ioctl on (9) returned: 0 Nov 13 08:55:36.471 : FE_READ_UNCORRECTED_BLOCKS(9): 12 Nov 13 08:55:37.471 frontend: Got command 69 (size: 12) Nov 13 08:55:37.473 frontend: ioctl on (9) returned: 0 Nov 13 08:55:37.473 : FE_READ_STATUS(9): SIGNAL CARRIER SYNC LOCK Nov 13 08:55:37.473 frontend: Got command 69 (size: 12) Nov 13 08:55:37.475 frontend: ioctl on (9) returned: 0 Nov 13 08:55:37.475 : FE_READ_STATUS(9): SIGNAL CARRIER SYNC LOCK Nov 13 08:55:37.475 frontend: Got command 71 (size: 12) Nov 13 08:55:37.476 frontend: ioctl on (9) returned: 0 Nov 13 08:55:37.476 : FE_READ_SIGNAL_STRENGTH(9): 22232 Nov 13 08:55:37.476 frontend: Got command 72 (size: 12) Nov 13 08:55:37.479 frontend: ioctl on (9) returned: 0 Nov 13 08:55:37.479 : FE_READ_SNR(9): 68 Nov 13 08:55:37.479 frontend: Got command 70 (size: 12) Nov 13 08:55:37.482 frontend: ioctl on (9) returned: 0 Nov 13 08:55:37.482 : FE_READ_BER(9): 2097151 Nov 13 08:55:37.482 frontend: Got command 73 (size: 12) Nov 13 08:55:37.483 frontend: ioctl on (9) returned: 0 Nov 13 08:55:37.483 : FE_READ_UNCORRECTED_BLOCKS(9): 0 Nov 13 08:55:38.483 frontend: Got command 69 (size: 12) Nov 13 08:55:38.485 frontend: ioctl on (9) returned: 0 Nov 13 08:55:38.485 : FE_READ_STATUS(9): SIGNAL CARRIER SYNC LOCK Nov 13 08:55:38.485 frontend: Got command 69 (size: 12) Nov 13 08:55:38.487 frontend: ioctl on (9) returned: 0 Nov 13 08:55:38.487 : FE_READ_STATUS(9): SIGNAL CARRIER SYNC LOCK Nov 13 08:55:38.487 frontend: Got command 71 (size: 12) Nov 13 08:55:38.488 frontend: ioctl on (9) returned: 0 etc, etc, ..... Bij "Setting state" staat unincrypted. Je zou haast zeggen dat daar ergens de problemen zitten. Immers, DC is een versleuteld kanaal. Geen wonder dat er geen verbinding wordt gezocht met OsCam wanneer ik afstem op DC. En daarom wordt de verbinding ,et OsCam ook gereset. Maar nu ... wat zou een oplossing kunnen zijn? Of heb ik iets niet goed geconfigureerd? 13 november 2011 aangepast door djmistral
Lamko Geplaatst: 13 november 2011 Geplaatst: 13 november 2011 Je zult je Channels.conf moeten controleren daar zit deze bit in! Mythbuntu 12.04 Celeron 220 op Mini-ITX D201GLY2, 1 GB Ram,2x1,5 TB HDD, Digitenne op TerraTec Cinergy, CCcam
djmistral Geplaatst: 14 november 2011 Auteur Geplaatst: 14 november 2011 Dit is de channels.conf die ik gebruik in tzap. Lamko, weet jij welk veld ik kan aanpassen zodat het kanaal wordt geclassificeerd als 'encrypted'? Nederland 1:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:7011:7012:1101 Nederland 2:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:7021:7022:1102 Nederland 3:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:7031:7032:1103 Omroep Brabant:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:7041:7042:1104 Omroep Brabant:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:7112:1111 Radio 1:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:7122:1112 Radio 2:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:7132:1113 3FM:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:7142:1114 Radio 4:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:7152:1115 Radio 5:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:7162:1116 Radio 6:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:7172:1117 FunX:546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:7192:1119 Eredivisie Live 1:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:2011:2012:21 Eredivisie 2/AT5:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:2021:2022:22 BBC One:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:2031:2032:23 MTV:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:2041:2042:24 Animal Planet / TLC:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:2051:2052:25 CNN:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:2061:2062:26 BBC Two:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:2071:2072:27 National Geographic:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:2081:2082:28 BNR Nieuwsradio:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:2172:217 Arrow Classic Rock:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:2182:218 Radio 538:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:2192:219 SSU 1:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:0:6210 SSU 2:554000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:0:6211 Veronica/Disney XD:754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:3011:3012:31 RTL 8:754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:3021:3022:32 ��n:754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:3031:3032:33 Ketnet/Canvas:754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:3041:3042:34 KinderNet/Comedy Central:754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:3051:3052:35 Discovery Channel:754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:3061:3062:36 Eurosport:754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:3071:3072:37 Meiden van Holland Hard:754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:3081:3082:38 RTL 4:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:1011:1012:11 RTL 5:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:1021:1022:12 RTL 7:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:1031:1032:13 SBS 6:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:1041:1042:14 NET5:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:1051:1052:15 SLAM!FM:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:1112:111 Radio 10 Gold:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:1122:112 Q-Music:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:1132:113 100%NL:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:1142:114 Classic FM:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:1152:115 SkyRadio 101 FM:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:1162:116 Radio Veronica:786000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:1172:117 Voor de zekerheid ook nog maar even het tzap commando dat ik gebruik. (Het pad naar de channels.conf heb ik ge-triple-checked op correctheid ) tzap -c /var/channels.conf -a 1 -r 'Discovery Channel'
Lamko Geplaatst: 15 november 2011 Geplaatst: 15 november 2011 Zie ca in Channels.conf : http://linuxtv.org/vdrwiki/index.php/Syntax_of_channels.conf Mythbuntu 12.04 Celeron 220 op Mini-ITX D201GLY2, 1 GB Ram,2x1,5 TB HDD, Digitenne op TerraTec Cinergy, CCcam
Hans Houwaard Geplaatst: 4 maart 2012 Geplaatst: 4 maart 2012 Ik reageer even op deze thread, mogelijk is dit voor anderen en dit issue nuttig. Ik heb zelf ook de combo sasc-ng en oscam en ik had ook de issue dat sasc-ng locked op het moment dat de idle time-out optreedt. Ik heb dit weten op te lossen door in oscam de client max idle van 120 seconden (default) op 0 te zetten. De time out treedt nu sneller op, maar sasc-ng locked niet en logt opnieuw in als een encrypted kanaal wordt gekozen. Nu nog kijken hoe stabiiel dit is als het systeem een dag idle is geweest. Hans MythBuntu 12.04 LTS (MythTV 0.26) Kernel 3.5.0-19-generic Hauppage NovaS2 HD DVB-S/S2 TeVii S470 DVB-S2 Asus NVidia 9600 GT Samsung LE40A552 LCD TV
ruwebol Geplaatst: 4 maart 2012 Geplaatst: 4 maart 2012 Zelf connect ik met sasc-ng met het Camd35 protocol. Hiertoe in cardclient.conf de regel "camd35:192.168.1.33:portnummercamd35:1/0000/0000:user:password" toegevoegd. In Oscam bij de Camd35 config (dis niet Camd35 TCP) het betreffende poortnummer invullen en daarna een user met Camd35 aanmaken. Ik gebruik wel sat ipv digitenne. DM500HD, Ubuntu 14.04-server-tvheadend-TBS6981-TBS6922SE-OSCam, Xubuntu/XBMCbuntu 14.04 front end's.
Aanbevolen berichten
Maak een account aan of log in om te reageren
Je moet een lid zijn om een reactie te kunnen achterlaten
Account aanmaken
Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!
Registreer een nieuwe accountInloggen
Heb je reeds een account? Log hier in.
Nu inloggen