dm500s Oscam - Niet werkend

[ronalds731]

Hallo,

 

Wij zijn al een tijdje bezig met het opzetten van een Oscam Server. dit is allemaal geen probleem alleen na het configureren lopen wij tegen diverse foutmeldingen.

 

1.

2012/01/06 13:39:04 B77BBB70 c user dummy authenticated successfully (mgcamd)
2012/01/06 13:39:04 B77BBB70 c AU enabled for user dummy on reader canaldigitaal
2012/01/06 13:39:04 B77BBB70 c no valid PROVID(s) found in CAID for user 'dummy'

 

2.

en een fout af en toe :

Server ident error ..............   komt niet overeeen caid 0600:00006A

 

Hij leest de canaldigitaal wel met 2 providers management en canaldigitaal etc. geeft Cardok aan met 1 entitlements. en daarmee houd het eigenlijk op.

 

Weet iemand hier een oplossing voor?

 

hieronder de config bestanden

 

oscam.conf:

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
logfile = /tmp/oscam.log;stdout
maxlogsize = 256
Saveinithistory = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
request_mode = 1
user = dobbie

[webif]
HttpPort = 3001
HttpUser = *******
HttpPWD = *******
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.10.255

[newcamd]
Key = 0102030405060708091011121314
Port = 50002@0100:000000
mgclient = 1
keepalive = 1

 

oscam.server:

[reader]
Label = canaldigitaal
Services = !OLD-Fake1,!OLD-Fake2,!OLD-Fake3,!OLD-Fake4,!OLD-Fake5,!OLD-Fake6,!OLD-Fake7,!OLD-Fake8,!OLD-Fake9,!OLD-Fake10,!OLD-Fake11,!OLD-Fake12,!OLD-Fake13,!OLD-Fake14,!OLD-Fake15,!OLD-Fake16,!OLD-Fake17,!OLD-Fake18,!OLD-Fake19,SecaC+1HD,SecaC+SD,!SecaC+2HD
Protocol = mouse
Device = /dev/ttyUSB0
Detect = CD
Group = 1
CAID = 0100,1817
mhz = 357
cardmhz = 500
EMMCache = 1,3,2
saveemm-unkown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
dropbadcws = 1

 

oscam.user

[account]
User = dummy
Pwd = dummy
AU = canaldigitaal
Group = 1
caid = 0100
ident = 0100:00006A
[account]
User = dummy1
Pwd = dummy1
AU = canaldigitaal
caid = 0100
ident = 0100:00006A
Group = 1

 

oscam.dvbapi:

I: 0100 #oud seca NL+Vlaanderen, needed for ignoring ecmpids if removed = no decoding of channels
I: 0500
I: 0622
I: 1819
M: 1817:00006A 0100:00006A #Mapping of CAID 1817 NL Package
M: 1818:00006C 0100:00006C #Mapping of CAID 1818 BE Package
P: 1817:00006A 1 #NL PAKKET
PL 1818:00006C 1 #Vlaams Pakket

 

oscam.services

[OLD-Fake1]
caid = 0100
provid = 000002,000003,000004,000005,000009,00000A,00000B,00000C,00000D,00000E,00000F,000010,000011,000012,000013,000014,000019,00001A,00001B,00001C,00001D,
000011,000021,000025,000011,000026,000029,00002E,000031,000033,000034,000037,00003E,
000064,000065,000066,000067,00006B,00006F,000070,000071,000072,000073,000076,00007A,00007B,000081,000082,000083,000088,000089,00008C,00009D,00009E,
0000A1,0000A2,0000A3,0000AC,0000AD,0000AE,0000B0,0000B2,000157,000159
[OLD-Fake2]
caid = 0100
provid = 00015A,00331B,00331D,003341,004001,004002,004006,,004101,004102,004108,005001,005211,005225,00A829
[OLD-Fake3]
caid = 0500
provid = 001540,001570,001C10,002100,002500,004800,005500,007000,007010,007C00,008000,008100,008110,008300,008400,008800,008810,008820,008C00,008C10,009400,
009C00,009C10,009C10,009C30,009C40,00A000,00A800,00A810,00A820,00AC00,00B000,00B400,
00B800,00C000,00C010,00C020,00C030,00C400,00C410,00C800,00C810,00C820,00C830,00C840,00C850,00C860,00C870,00D400,00D540,00D800,00E400,00E410,
00E430,00E440,00E450,00E470,00E800,00E810,00F000,00F520,00F800,010800,010C00
[OLD-Fake4]
caid = 0500
provid = 010C10,010C20,010C30,010C40,011000,011C00,012000,012010,012800,012810,012C00,013400,014400,014800,014880,014C00,015000,016400,016800,016810,
016C00,016C10,016C20,017000,017010,018810,018820,018C00,019000,019400,019410,019420,019430,
019440,01A400,01AC00,020000,020010,020510,020520,020530,020540,020600,020610,020620,020630,020640,020700,020710,020830,020840,020850,020860,
020A10,020A20,020A30,020B20,020C00,020C10,020C20,020C30,020C40,021100,021120
[OLD-Fake5]
caid = 0500
provid = 021210,021220,021500,021510,021570,021710,021B10,021C10,022100,022110,022210,022600,022620,022E10,022F10,023110,023120,023130,023140,023210,
023220,023230,023240,023710,024410,024510,024520,024F10,025110,025120,025910,030A10,030A20,
030A30,031B10,032010,032100,032830,032840,032910,032930,032950,032E00,040A10,041100,041510,041520,041530,041910,041920,041930,041940
[OLD-Fake6]
caid = 0618
provid = 000000
[OLD-Fake7]
caid = 0626
provid = 000000
[OLD-Fake8]
caid = 0924
provid = 000000
[OLD-Fake9]
caid = 0932
provid = 000000
[OLD-Fake10]
caid = 0974
provid = 000000
[OLD-Fake11]
caid = 0981
provid = 000000
[OLD-Fake12]
caid = 09a)
provid = 000000
[OLD-Fake13]
caid = 0d00
provid = 000004,000008,000014,000064,000068,00006C,00006D,00008D,0000C4,0000C8,0000CC
[OLD-Fake14]
caid = 0d01
provid = 000050,000054,0000E0,0000E8,0000EC
[OLD-Fake15]
caid = 0d02
provid = 000080,000088,00008C,0000A4,0000A8
[OLD-Fake16]
caid = 0d03
provid = 00000C,000010,000020,000024,000028,000060,0000A4,0000A8,0000AC,0000B0,0000C0,0000C4,0000C8
[OLD-Fake17]
caid = 0d04
provid = 000008,00000C,000010,000014
[OLD-Fake18]
caid = 0d05
provid = 00000C
[OLD-Fake19]
caid = 0d06
provid = 000004
[No-0100-006a]
caid = 0100
provid = 00006A
#Ned1 Ned2 Ned3 RTL4 HD
[secaC+1HD]
caid = 0100
provid = 00006A
srvid = 1B7B,17C0,5230,1B6C
#Ned1 Ned2 Ned3 RTL4 SD
[secaC+1SD]
caid = 0100
provid = 00006A
srvid = 0FAB,0FAC,0FAD,07D4
#RTL5 SBS6 RTL7 RTL8 HD
[secaC+2HD]
caid = 0100
provid = 00006A
srvid = 5217,17CA,5212,1B7C
#RTL5 SBS6 RTL7 RTL8 HD
[secaC+2SD]
caid = 0100
provid = 00006A
srvid = 07D5,0FA2,07D6,07F3

[Gast biggie0344]

oscam.conf

 

[newcamd]

Key = 0102030405060708091011121314

Port = 50002@0100:00006A

mgclient = 1

keepalive = 1

 

dit hoort zo te zijn

 

en

 

in oscam.server

 

caid = 0100

ident = 0100:00006A

 

ff dit maken

zodat je van de kaart alleen de nederlandse kanalen afneem..

 

caid 1817 mag je verwijderen;)

 

als je dit doet..

 

dan moet hij werken;)

[ronalds731]

bedankt biggie,

 

ik heb het aangepast hij is nu wel verder een geeft die foutmeldingen niet meer alleen 1 nieuwe..... weet je hier toevallig ook een oplossing voor of ligt het aan de dvbapi, en services want daar weet ik niks vanaf of hij goed is etc.

 

en oscam versie: OSCAM 1.10rc-svn build #6089:

Ubuntu: 11.10

(dvbapi heb ik van hier : http://www.sat4all.com/forums/topic/318622-configuratie-instellingen-oscam-voor-intern-gebruik/page__st__90 )

 

2012/01/06 14:39:50 B789FB70 r reader thread started (thread=B789FB70, label=canaldigitaal, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=500)
2012/01/06 14:39:53 B789FB70 r canaldigitaal card detected
2012/01/06 14:39:57 B789FB70 r ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2012/01/06 14:39:59 B789FB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/01/06 14:40:00 B789FB70 r type: SECA, caid: 0100, serial: ************, card: Canal+ NL v10.0
2012/01/06 14:40:00 B789FB70 r [seca-reader] provider: 1, valid: 1, name: MANAGMENT, expiry date: 2012/03/03
2012/01/06 14:40:00 B789FB70 r [seca-reader] SA: 1108DE0E
2012/01/06 14:40:00 B789FB70 r [seca-reader] provider: 2, valid: 1, name: CANALDIGITAAL, expiry date: 2012/02/10
2012/01/06 14:40:00 B789FB70 r [seca-reader] SA: 003250F8
2012/01/06 14:40:00 B789FB70 r providers: 2 (0000,006A)
2012/01/06 14:40:00 B789FB70 r [seca-reader] parental locked
2012/01/06 14:40:00 B789FB70 r [seca-reader] ready for requests
2012/01/06 14:40:00 B789FB70 r found cardsystem seca
2012/01/06 14:40:00 B789FB70 r [seca-reader] PBM for provider 2: c200000000000000
2012/01/06 14:40:01 B78AC6C0 s init for all local cards done
2012/01/06 14:40:01 B78AC6C0 s anti cascading disabled
2012/01/06 14:40:01 B7860B70 c client connected to 50002 port
2012/01/06 14:40:01 B7860B70 c encrypted newcamd:50002-client 192.168.2.143 granted (dummy, au=on (1 reader))
2012/01/06 14:40:01 B7860B70 c user dummy authenticated successfully (mgcamd)
2012/01/06 14:40:01 B7860B70 c AU enabled for user dummy on reader canaldigitaal
2012/01/06 14:40:02 B7860B70 c dummy (0100&00006A/0FAD/64:9A24): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/01/06 14:40:02 B7860B70 c dummy (0100&00006A/0FAD/64:6E93): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/01/06 14:40:04 B7860B70 c dummy (0100&00006A/0FAD/64:9A24): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/01/06 14:40:04 B7860B70 c dummy (0100&00006A/0FAD/64:6E93): rejected group (0 ms) (of 0 avail 0) (no matching reader)

 

 

 

 

hier met 256 debug modus

 

[color=#666666]2012/01/06 14:43:01 B7860B70 c dummy (0100&00006A/0FAD/64:F112): rejected group (0 ms) (of 0 avail 0) (no matching reader) [/color]
[color=#666666]2012/01/06 14:43:01 B7860B70 c cw: [/color]
[color=#666666]2012/01/06 14:43:01 B7860B70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 c nmr(): len=2, errno=0 [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 c received 102 bytes from client [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 0F AD 80 00 61 00 6A 00 00 FD 10 01 3E 00 2F 7A [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 09 E0 AC 57 C6 4D 74 C0 78 1C C2 B3 BC DC 06 EB [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 9B BA 4D A5 6E A8 F7 6D 05 38 DA D9 32 B6 76 C4 [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 DB 76 F8 4C 71 31 44 45 60 6A 41 A0 17 07 0F 43 [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 C7 EA AF 48 AF 0D 81 A1 C6 E1 4F 11 5E 03 61 9B [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 45 8D 7B 63 5C 50 E4 AF A6 89 E2 46 02 ED 92 DD [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 B7 A1 1C DD 0B AA [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 c ncd_process_ecm: er->cpti=0, cl_msgid=699, 80 [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 c trying user 'dummy' filter 0100:000000 [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 c trying user 'dummy' filter 0100:00006A [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 c 0100:00006A allowed by user 'dummy' filter 0100:00006A [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 c trying server filter 0100:00006A [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 c 0100:00006A allowed by server filter 0100:00006A [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 c ncd_send_dcw: er->cpti=0, cl_msgid=699, 80 [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 c send 15 bytes to client [/color]
[color=#666666]2012/01/06 14:43:03 B7860B70 00 0D 02 BB 00 00 00 00 00 00 00 00 80 00 00 [/color]

 

 

 

 

dit krijg ik ook als ik oscam via een cline een nieuwe proxie reader aanmaak. van de oude cccam server. die in mijn thuisnetwerk instabiel is.

6 januari 2012 aangepast door ronalds731

[Gast biggie0344]

oscam.user heeft 2x group = 1

 

verwijder er ff eentje en dan kijke we verder;)

[ronalds731]

oscam.user heeft 2x group = 1

 

verwijder er ff eentje en dan kijke we verder;)

 

 

2de user weggehaald en oscam opnieuw opgestart

 

nog steeds

2012/01/06 15:17:53 B78AC6C0 s anti cascading disabled
2012/01/06 15:17:53 B787AB70 c client connected to 50002 port
2012/01/06 15:17:53 B787AB70 c encrypted newcamd:50002-client 192.168.2.143 granted (dummy, au=on (1 reader))
2012/01/06 15:17:53 B787AB70 c user dummy authenticated successfully (mgcamd)
2012/01/06 15:17:53 B787AB70 c AU enabled for user dummy on reader canaldigitaal
2012/01/06 15:17:54 B787AB70 c dummy (0100&00006A/0FAD/64:816D): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2012/01/06 15:17:54 B787AB70 c dummy (0100&00006A/0FAD/64:E90D): rejected group (0 ms) (of 0 avail 0) (no matching reader)

[Gast biggie0344]

ken je nu ff je oscam.conf

oscam.server

oscam.user

 

even toevoegen zodat ik het gelijk ff fix..

[ronalds731]

oscam.conf

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
logfile = /tmp/oscam.log;stdout
maxlogsize = 256
Saveinithistory = 1
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
request_mode = 1
user = dobbie

[webif]
HttpPort = 3001
HttpUser = admin
HttpPWD = jordymark
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.10.255
HttpReadOnly = 0
[newcamd]
Key = 0102030405060708091011121314
Port = 50002@0100:00006A
mgclient = 1
keepalive = 1

 

 

oscam.user

[account]
User = dummy
Pwd = dummy
AU = canaldigitaal
Group = 1
caid = 0100
ident = 0100:00006A

 

oscam.server

[reader]
label						 = canaldigitaal
protocol					  = mouse
device						= /dev/ttyUSB0
services					  = !old-fake1,!old-fake2,!old-fake3,!old-fake4,!old-fake5,!old-fake6,!old-fake7,!old-fake8,!old-fake9,!old-fake10,!old-fake11,!old-fake12,!old-fake13,!old-fake14,!old-fake15,!old-fake16,!old-fake17,!old-fake18,!old-fake19,secac+1hd,!secac+2hd
cardmhz					   = 500
detect						= cd
mhz						   = 357
caid						  = 0100
ident						 = 0100:00006A
group						 = 1
emmcache					  = 1,3,2
dropbadcws					= 1

 

ik kan ze niet uploaden dus alleen zo ^^

6 januari 2012 aangepast door ronalds731

[Gast biggie0344]

oscam.server

 

[reader]

label = canaldigitaal

protocol = mouse

device = /dev/ttyUSB0

cardmhz = 500

detect = cd

mhz = 357

caid = 0100

ident = 0100:00006A

group = 1

emmcache = 1,3,2

 

oscam.conf

 

[global]

nice = -1

WaitForCards = 1

preferlocalcards = 1

lb_mode = 1

lb_save = 150

logfile = /tmp/oscam.log;stdout

maxlogsize = 256

Saveinithistory = 1

 

[webif]

HttpPort = 3001

HttpUser = admin

HttpPWD = jordymark

HttpRefresh = 10

HttpAllowed = 192.168.0.1-192.168.10.255

HttpReadOnly = 0

 

[newcamd]

Key = 0102030405060708091011121314

Port = 50002@0100:00006A

mgclient = 1

keepalive = 1

 

zo moettie het doen

zo niet geef ff de log hier weer;)

6 januari 2012 aangepast door biggie0344

[ronalds731]

Bedankt Biggie,

 

hij werkt nu, eindelijk na 1 week .

 

wel even een vraagje ik zie dat je die services en dvbapi eruit hebt gehaald. heb ik daar voor de rest nog wat mee van doen of kan ik die net zo goed verwijderen.

 

in iedergeval bedankt ^^

 

 

2012/01/06 16:15:47 B78AC6C0 s anti cascading disabled
2012/01/06 16:15:47 B7860B70 c client connected to 50002 port
2012/01/06 16:15:47 B7860B70 c encrypted newcamd:50002-client 192.168.2.143 granted (dummy, au=on (1 reader))
2012/01/06 16:15:47 B7860B70 c user dummy authenticated successfully (mgcamd)
2012/01/06 16:15:47 B7860B70 c AU enabled for user dummy on reader canaldigitaal
2012/01/06 16:15:48 B7860B70 c housekeeping lb stats thread started
2012/01/06 16:15:48 B7860B70 c dummy (0100&00006A/0FAF/64:C4BE): found (414 ms) by canaldigitaal (of 1 avail 1)
2012/01/06 16:15:56 B7860B70 c dummy (0100&00006A/0FAF/64:6DB6): found (408 ms) by canaldigitaal (of 1 avail 1)

6 januari 2012 aangepast door ronalds731

[Gast biggie0344]

ik gebruik zelf dvbapi niet ;-)

 

in ieder geval jij ook bedankt:-)

 

als er iets is ken je altijd PM sturen ALTIJD:D

[ronalds731]

hallo biggie / anderen

 

jullie hebben mij laatst geholpen met mijn interne Oscam server van Canal digitaal, nu heb ik mijn 2de smargo reader binnen en wil ook SKY de door het hele huis kijken.

 

reader etc vind hij wel dit vind ik in de logs met opstarten:

 

[color=#666666]r reader thread started (thread=B78B5B70, label=sky, device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357) [/color]

 

daarna doet hij helemaal niks meer ( sky tenminste ) en vervolgens komt er bij entitlements OFF te staan. Weet jij zo hoe ik die aan kan krijgen? hij doet het wel in de orginele sky box.

 

oscam.server (sky.de)

 

[reader]
label                         = sky
protocol                      = mouse
device                        = /dev/ttyUSB1
caid                          = 09C4
boxid                         = *********
detect                        = cd
mhz                           = 357
cardmhz                       = 500
ident                         = 09C4:000000
group                         = 1
emmcache                      = 1,3,2

[Michel]

Biggie is buiten geknikkerd omdat die mafketel ondanks duidelijke waarschuwingen sat4all (mis)gebruikte voor zijn illegale cardsharing activiteiten.

 

Daarna is bij volledig geblokkeerd vanwege (mislukte) hackpogingen op de sat4all server.

[theparasol]

Cardmhz moet 600 zijn.

CAID zou ik ff leeg laten, vult oscam die zelf in ahdv wat hij op de card vindt.

Boxkey is niet nodig voor SKY Germany... SKY UK wel, maar in dat geval klopt je CAID in elk geval niet.

10 januari 2012 aangepast door theparasol

[Tonskidutch]

Cardmhz moet 600 zijn.

CAID zou ik ff leeg laten, vult oscam die zelf in ahdv wat hij op de card vindt.

Boxkey is niet nodig voor SKY Germany... SKY UK wel, maar in dat geval klopt je CAID in elk geval niet.

boxkey niet bij V13 Box id wel

12345678

wil je de instellingen?

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn build #6199
# Read more: http://streamboard.gmc.to/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
serverip					  = 10.0.0.120
usrfile					   =
mailfile					  =
logfile					   = /var/log/emu.log
cwlogdir					  =
emmlogdir					 =
disablelog					= 1
disableuserfile			   = 1
disablemail				   = 1
loghistorysize				= 4096
usrfileflag				   = 0
clienttimeout				 = 5000
fallbacktimeout			   = 2000
clientmaxidle				 = 60
failbantime				   = 0
failbancount				  = 0
cachedelay					= 0
bindwait					  = 120
netprio					   = 0
sleep						 = 0
unlockparental				= 1
nice						  = -1
serialreadertimeout		   = 1500
suppresscmd08				 = 1
maxlogsize					= 50
waitforcards				  = 0
waitforcards_extra_delay	  = 500
preferlocalcards			  = 1
saveinithistory			   = 1
readerrestartseconds		  = 5
dropdups					  = 0
cacheexwaittime			   = 50
cacheexenablestats			= 0
lb_mode					   = 0
lb_save					   = 0
lb_nbest_readers			  = 1
lb_nfb_readers				= 1
lb_min_ecmcount			   = 5
lb_max_ecmcount			   = 500
lb_reopen_seconds			 = 900
lb_retrylimit				 = 800
lb_retrylimits				=
lb_nbest_percaid			  =
lb_noproviderforcaid		  =
lb_savepath				   =
lb_stat_cleanup			   = 336
lb_reopen_mode				= 0
lb_max_readers				= 0
lb_auto_betatunnel			= 1
lb_auto_betatunnel_prefer_beta= 50
resolvegethostbyname		  = 0
double_check				  = 0
[monitor]
port						  = 0
serverip					  = 0.0.0.0
nocrypt					   =
aulow						 = 30
hideclient_to				 = 15
monlevel					  = 2
appendchaninfo				= 0
[cs357x]
port						  =15110
serverip					  = 10.0.0.120
suppresscmd08				 = 1
[cccam]
port						  = 15110
reshare					   = 2
ignorereshare				 = 0
forward_origin_card		   = 0
version					   = 2.2.1
updateinterval				= 240
minimizecards				 = 0
keepconnected				 = 1
stealth					   = 0
nodeid						= eneenheleboel3109D1506
reshare_mode				  = 0
[webif]
httpport					  = 16012
httphelplang				  = en
httpuser					  = admin
httppwd					   = ladida
httpcert					  =
httpcss					   =
httpjscript				   =
httptpl					   =
httpscript					=
httprefresh				   = 0
httpallowed				   = 127.0.0.1,10.0.0.20
httpdyndns					=
httphideidleclients		   = 1
httpreadonly				  = 0
httpsavefullcfg			   = 1
[anticasc]
enabled					   = 1
numusers					  = 0
sampletime					= 2
samples					   = 10
penalty					   = 0
aclogfile					 = ./oscam_ac.log
denysamples				   = 8
fakedelay					 = 1000

 

oscam.server

 

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn build #6199

# Read more: http://streamboard.g...scam.server.txt

 

[reader]

label = reader-0

description = V13

enable = 1

protocol = internal

device = /dev/sci0

device_out_endpoint = 0x 0

key =

password =

pincode = none

readnano =

services =

resetcycle = 0

smargopatch = 0

showcls = 0

fallback = 0

cacheex = 0

logport = 0

caid = 09C4

boxid = 12345678

fix9993 = 0

rsakey =

ins7e =

ins7e11 =

force_irdeto = 0

boxkey =

atr =

ecmwhitelist =

detect = cd

nagra_read = 0

mhz = 500

cardmhz = 357

ident = 09C4:000000

chid =

class =

aeskeys =

showcls = 0

group = 1

emmcache = 0,0,0

blockemm-unknown = 0

blockemm-u = 0

blockemm-s = 0

blockemm-g = 0

saveemm-unknown = 0

saveemm-u = 0

saveemm-s = 0

saveemm-g = 0

blockemm-bylen =

lb_weight = 100

savenano =

blocknano =

ccchop = 0

deprecated = 0

audisabled = 0

auprovid = 0009C4

ndsversion = 2

ratelimitecm = 0

ratelimitseconds = 0

cooldown = 0,0

 

 

oscam users

 

[account]
user						  = oscam
pwd						   = oscam
description				   = oscam
disabled					  = 0
expdate					   =
allowedtimeframe			  =
group						 = 1,2
hostname					  = 10.0.0.120
uniq						  = 2
cacheex					   = 0
sleep						 = 0
monlevel					  = 4
au						    = 1
services					  =
allowedprotocols			  =
caid						  = 09C4
betatunnel				    =
ident						 = 0000:000000
chid						  =
class						 =
suppresscmd08				 = 1
cccmaxhops				    = 10
cccreshare				    = -1
cccignorereshare			  = -1
cccstealth				    = -1
sleepsend					 = 0
failban					   = 0
keepalive					 = 1
numusers					  = -1
penalty					   = -1

10 januari 2012 aangepast door Tonskidutch

[ronalds731]

bedankt voor jullie reacties,

 

ik heb geprobeerd het op 600 mhz te zetten met en zonder box id:12345678, caid 09C4 en caid: 1702

vervolgens heb ik de reader van Tonski erin gezet met beide configuraties heb ik nu wel Cardok erstaan net zoals bij Canal digitaal. maar er staat 0 entitlements. bij sky De V13 en bij Canal digitaal staat er wel 1 en die werkt ook prima.

 

Ik heb daarnaast geprobeert het box id te calculeren maar ik heb niet het aantal getallen om het om tezetten. mijn serials zijn: 16 getallen of 14. terwijl ik 11 of 17 nodig heb.

 

Weet iemand een oplossing hiervoor? hij werkt wel in de orginele sky box. en ook in een dm500 met cccam maar niet met mgcamd.

 

dit zijn de gegevens die hij nu wel leest in oscam:

2012/01/11 10:43:55 B7896B70 r reader thread started (thread=B7896B70, label=reader-0, device=/dev/ttyUSB1, detect=cd, mhz=500, cardmhz=357)
2012/01/11 10:43:55 B78AF6C0 s waiting for local card init
2012/01/11 10:43:58 B7896B70 r reader-0 card detected
2012/01/11 10:44:04 B7896B70 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2012/01/11 10:44:06 B7896B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2012/01/11 10:44:08 B7896B70 r [videoguard2-reader] parental lock setting: FF FF FF FF
2012/01/11 10:44:08 B7896B70 r [videoguard2-reader] type: VideoGuard Sky Germany, caid: 09C4
2012/01/11 10:44:08 B7896B70 r [videoguard2-reader] serial: 00137ACC, BoxID: 12345678, baseyear: 1997
2012/01/11 10:44:08 B7896B70 r [videoguard2-reader] ready for requests
2012/01/11 10:44:08 B7896B70 r found cardsystem videoguard2
2012/01/11 10:44:08 B7896B70 r [videoguard2-reader] reader-0 card detected
2012/01/11 10:44:08 B7896B70 r [videoguard2-reader] type: VideoGuard Sky Germany
2012/01/11 10:44:08 B7896B70 r [videoguard2-reader] tier: 1389, expiry date: 2002/02/01-00:01:16

 

 

alvast bedankt.

 

 

(ps dit is niet voor een illegale server alleen voor thuis. voor dat ik hiervoor een ban krijg zoals biggie ofso. met oog op die nieuwe maatregel die er gaat komen van canal digitaal. wil ik alleen kijken in huis op onze 3 receivers.)