EMMCACHE en LB Nu snap ik het

[Hemant]

Vrienden,

 

Ik heb gisteren zitten stoeien met C+ en LB icm met en diverse settings gebruikt ik heb 2 smargo's met C+

 

Ik had LB op optie 3 staan en emm op 1,2,15, ik heb 3 boxen aan gezeten en ben een beetje gaan zappen en volgen wat er gebeurde.

ik zag heel vaak ECM limit op de kaarten toen ben ik even met de instellingen gaan spelen en wat gaan inlezen op de emmcache functie.

 

EN zag RTL4 HD bvb op 2 kaarten in gebruik heen en weer zappen ging met 0,00003 dus cache lezen ging goed.

 

 

Als ik het goed begrijp gaat het alsvolgt

cijfer 1 = aanzetten van cache

cijfer 2 = is vastzetten van het aantal cache

cijfer 3 = logging

 

Dus: 1,2,15 betekend dat ik cache lees en 2 keer schijf dus 2 sids gebuik per opgevraagde kanaal en met max 4 sids ben je er dus al heel gauw.

 

De optimale setting voor mij was dus: 1,1,15 en ik zie geen ECM limit reached meer in mijn logs.

 

Misschien handig voor als je aan het stoeien bent.

 

Groetjes,

 

Hemant

[Hotzenwalder]

Bedankt voor de tips!

[Codx]

Helaas je zit harstikke fout hoor. Allereerst het verschil tussen emm en ecm's:

 

EMM's zijn kaartupdates zoals bijv een pakketwijziging, een (her) activatie of een datum danwel software update op de kaart. ECM's zijn de crypted sleutels die naar je kaart gaan, de kaart verwerkt deze en dat resultaart in een CW oftewel " crypted word" (cw0 & cw1 om percies te zijn) en die gaat naar je ontvanger en daardoor heb je beeld. (meestal 8-10 sec geldig)

 

De EMMCACHE is dus niet van toepassing op het kijken en heeft dus geen invloed op de SID LIMIT. De meeste gebruiken voor emmcache 1,3,2. Dat wil zeggen. kaartupdates worden gecached, max 3x geschreven op de kaart en de geschreven emm's worden tevens gelogd.

 

Zie de officiele uitleg:

 

emmcache = usecache,rewrite,logging

set EMM cache of local reader:

 

usecache = 0|1: 1 = enable EMM caching, default:0

 

rewrite = determines how often one and the same EMM is

written, default:0

 

logging = EMM logging mask:

 

0 = EMM logging disabled (default)

1 = logging EMM errors

2 = logging written EMMs

4 = logging skipped EMMs

8 = logging blocked EMMs

16 = logging disabled AU

4 februari 2012 aangepast door Codx

[Hemant]

hmm ok thanx.

 

Dan zit ik er nar maar waarom loopt met die seting mijn kaart vol met 3 boxen?

 

Hemant

[Codx]

Die setting heeft er helemaal niks mee te maken. Als je met oscam werkt moet je de ecmratelimit gebruiken

[fransken]

van het oscam forum hier over er zijn nu 4 opties

welke instellingen kan ik nu het beste gebruiken voor een C+ kaart

emmcache = 1,3,10,0 #  Cache on, write 3 x, log written (2) and blocked (8) = 10 , don't send stb-emmemmcache = 1,2,6,0  #  Cache on, write 2 x, log written (2) and skipped (4) = 6, don't send stb-emm

[theparasol]

Mij bevalt dit voor mijn beide seca kaarten het beste:

 

 

emmcache = 1,1,0,0

[fransken]

oke thanks

 

heb er dit nu in zitten

 

[reader]
label                             = Smart_01
protocol                        = smartreader
device                           = Serial:smart 01
services                        = canal_digitaal
caid                               = 0100
ecmwhitelist                   = 0100@00006A:64
ecmheaderwhitelist         = 800061006A00075C00,800061006A01075C00,803061006A00075C00,803061006A01075C00,810061006A00075C00,810061006A01075C00,813061006A00075C00,813061006A01075C00
detect                            = cd
mhz                               = 534
cardmhz                        = 369
ident                              = 0100:00006A
group                             = 1
emmcache                     = 1,1,0,0
blockemm-unknown        = 1
blockemm-g                    = 1
dropbadcws                    = 1
disablecrccws                 = 1
auprovid                         = 00006A
ratelimitecm                   = 4
ratelimittime                   = 9000
ecmunique                     = 1
srvidholdtime                 = 2000
cooldown                       = 30,600

11 maart 2015 aangepast door fransken

[fransken]

gaat niet helemaal lekker 3 opnames en 1 kijken de ratelimiter grijpt in bij oscam 10611

en bij 2 opnames en 1 kijken gaat het ook fout

 

2015/03/11 21:57:16  8B7A790 h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2015/03/11 21:57:16  8B7C608 r   (reader) Smart_01 [smartreader] Reader initialized (device=Serial:smart 01, detect=cd, mhz= AUTO, cardmhz=369)
2015/03/11 21:57:16  8B7CF48 r   (reader) Smart_03 [smartreader] Reader initialized (device=Serial:smart 03, detect=cd, mhz= AUTO, cardmhz=369)
2015/03/11 21:57:16  8B7CAA8 r   (reader) Smart_02 [smartreader] Reader initialized (device=Serial:smart 02, detect=cd, mhz= AUTO, cardmhz=369)
2015/03/11 21:57:17  8B7C608 r   (reader) Smart_01 [smartreader] card detected
2015/03/11 21:57:19  8B7C608 r   (reader) Smart_01 [smartreader] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2015/03/11 21:57:19  8B7C608 r   (reader) Smart_01 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=1
2015/03/11 21:57:19  8B7C608 r   (reader) Smart_01 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2015/03/11 21:57:19  8B7C608 r   (reader) Smart_01 [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=1 T=0 inv=0 parity=EVEN
2015/03/11 21:57:19  8B7C608 r   (reader) Smart_01 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/03/11 21:57:20  8B7C608 r   (reader) Smart_01 [smartreader] detect seca/nagra tunneled card
2015/03/11 21:57:20  8B7C608 r   (reader) Smart_01 [smartreader] Nagra layer found
2015/03/11 21:57:20  8B7C608 r   (reader) Smart_01 [smartreader] Rom revision: DNASP400 RevI4A
2015/03/11 21:57:21  8B7C608 r   (reader) Smart_01 [smartreader] type: SECA, caid: 0100, serial: #########, card: Mediaguard v10.0
2015/03/11 21:57:21  8B7C608 r   (reader) Smart_01 [smartreader] found card system seca
2015/03/11 21:57:21  8B7C608 r   (reader) Smart_01 [seca] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2015/03/11 21:57:21  8B7C608 r   (reader) Smart_01 [seca] Request provider 1
2015/03/11 21:57:21  8B7C608 r   (reader) Smart_01 [seca] provider 1: 0000, valid: 1, name: MANAGMENT, expiry date: 2015/05/08
2015/03/11 21:57:21  8B7C608 r   (reader) Smart_01 [seca] SA: ########
2015/03/11 21:57:21  8B7C608 r   (reader) Smart_01 [seca] PBM for provider 1: 799008001c000
2015/03/11 21:57:21  8B7C608 r   (reader) Smart_01 [seca] Request provider 2
2015/03/11 21:57:21  8B7C608 r   (reader) Smart_01 [seca] provider 2: 006A, valid: 1, name: CANALDIGITAAL, expiry date: 2015/05/03
2015/03/11 21:57:21  8B7C608 r   (reader) Smart_01 [seca] SA: ########
2015/03/11 21:57:21  8B7C608 r   (reader) Smart_01 [seca] PBM for provider 2: c280000000000000
2015/03/11 21:57:22        0 s     (main) init for all local cards done
2015/03/11 21:57:22        0 s (emmcache) loaded 7 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/03/11 21:57:22        0 s (emmcache) loaded 4 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/03/11 21:57:22        0 s (anticasc) anti cascading disabled
2015/03/11 21:57:22 B7403D68 c  (newcamd) client connected to 10110 port
2015/03/11 21:57:22 B7403D68 c   (client) encrypted newcamd:10110-client 192.168.1.127 granted (test, au=auto (3 reader))
2015/03/11 21:57:22 B7403D68 c  (newcamd) user test authenticated successfully (CCcam)
2015/03/11 21:57:22 B7403D68 c  (newcamd) AU enabled for user test on reader Smart_01
2015/03/11 21:57:29 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:6FABA30C113B943EF30FD7E6AFA8A021): found (310 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:57:29 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:AA558EE4513B5AA7B2C96D9D757CB97A): found (293 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:57:39 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:3E31EDF4D37A10FB1A46160D290749E9): found (293 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:57:39 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:BC52E72A8367DC114CDDD14140F39C4D): found (293 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:57:40 B7403D68 c      (ecm) test (0100&00006A/5C00/522B/64:13D8C0D8B64FA5B087DF209420542791): found (296 ms) by Smart_01 - 522B Veronica/DisneyXD
2015/03/11 21:57:49 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:A54FD0588F785074933ECDA99CB0B171): found (302 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:57:49 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:08085DB3C25DB894AF24FA966DB4185F): found (297 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:57:49 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:893C6144328C0D27BAF96B2F366EC4CF): rejected  (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
2015/03/11 21:57:51 B7403D68 c      (ecm) test (0100&00006A/5C00/521C/64:D79C3E8073B8B00A3B0B5D3A17BAE51F): found (320 ms) by Smart_01 - 521C NET 5 HD
2015/03/11 21:57:59 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:7723A62D80BC520097ED2000680B31A6): found (297 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:57:59 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:6E7ED878FC88BADD6F877B6164040876): found (297 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:57:59 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:14CADD35A9A679574BB0A5B6F32C3004): found (297 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:57:59 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:35C905EA074333A49A36D47BCBD28EC9): rejected  (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
2015/03/11 21:58:09 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:5B312965D0B31598A33AD668BA7D1A6F): found (302 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:58:09 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:4386FBFE7EA5BC9D645F1F4B8968544B): found (296 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:58:09 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:30C7E3CB7927AFFB5A8C4240F23896ED): found (297 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:58:09 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:9D190DD8E6AD79D23932B05E85532DD4): rejected  (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
2015/03/11 21:58:19 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:BF201F4E31EACA9B277D61DD7ACEABCA): found (297 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:58:19 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:42FDFA0A6331ACE616D9957027695A49): found (297 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:58:19 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:906BCEB467417E7E245B64C9B5943228): found (297 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:58:19 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:F9967D9D0CA0C918F46FC56DF1D3A3DD): rejected  (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
2015/03/11 21:58:29 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:39EB76AF3EC432BC0720F8413E9EDD4A): found (298 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:58:29 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:E8CB3FFA6071DCAB8B98D6DD97095406): found (297 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:58:29 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:F411D5B7343B2456A5D4402667F7CEB6): found (297 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:58:29 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:1CA4374A1FD860B7E8F45ED56010EB24): rejected  (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
2015/03/11 21:58:39 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:E9B8FF1748489B882242DDA8E83E332A): found (297 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:58:39 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:640C291FB485A43E96D05829EBFC26A1): found (297 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:58:39 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:779E9818C791E2821C12D645940A6CE5): found (305 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:58:39 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:CFC05608C238351A3DE215C3F04C908C): rejected  (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
2015/03/11 21:58:49 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:5FC36DBF788F8E34FA6806A8A816683F): found (301 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:58:49 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:9809664A7ED856810D99679E4BC20B83): found (297 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:58:49 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:D9B9272AB3A6DC0E381AC4421A210B89): rejected  (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
2015/03/11 21:58:51 B7403D68 c      (ecm) test (0100&00006A/5C00/521C/64:D35A629276F9676BA92B296EFA877964): found (297 ms) by Smart_01 - 521C NET 5 HD
2015/03/11 21:58:59 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:A928026856A29BCD7137CD50281E266A): found (298 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:58:59 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:13FA1EC114EAFC9816E03AA1D4C515C6): found (297 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:58:59 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:CA54B7DA916A69B5E9B543775DEF09D1): rejected  (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
2015/03/11 21:59:09 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:8FD67B680DB42558105FF807CAA876AE): found (295 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:59:09 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:D9FC2CE600107911C98FE6DAD0BC3EA4): found (295 ms) by Smart_01 - 5230 NPO 3 HD
2015/03/11 21:59:19 B7403D68 c      (ecm) test (0100&00006A/5C00/5225/64:479E5AB3CD40D774729742FC84E85409): found (296 ms) by Smart_01 - 5225 NPO 1 HD
2015/03/11 21:59:19 B7403D68 c      (ecm) test (0100&00006A/5C00/5230/64:67979B611C0C4E156B6078D80A6CCC00): found (294 ms) by Smart_01 - 5230 NPO 3 HD

11 maart 2015 aangepast door fransken

[theparasol]

Merkwaardig hoor, ik zie tot wel 3 verschillende ecm aanvragen op zelfde moment voor NPO3.... hoe krijg je dat voor elkaar?

[fransken]

Unix starttime: 1426110889
Starttime:      11.03.2015 22:54:49
Version:        oscam-1.20-unstable_svn-r10611
Compiler:       i486-linux-gnu-libusb
Box type:       generic (generic)
ConfigDir:      /usr/local/etc/
WebifPort:      8888

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 yes
SSL support:                             no
DVB API support:                         yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with STAPI support:              no
Irdeto guessing:                         no
Anti-cascading support:                  yes
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  yes
CW Cycle Check support:                  yes
LCD support:                             no
LED support:                             no
Clockfix with realtime clock:            yes
IPv6 support:                            no

camd 3.3x:                               yes
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    no
radegast:                                no
scam:                                    no
serial:                                  no
constant CW:                             no
Pandora:                                 no
ghttp:                                   no

Reader support:                          yes

Nagra:                                   yes
Irdeto:                                  no - no EMM support!
Conax:                                   no - no EMM support!
Cryptoworks:                             no - no EMM support!
Seca:                                    yes
Viaccess:                                no - no EMM support!
NDS Videoguard:                          no - no EMM support!
DRE Crypt:                               no - no EMM support!
TONGFANG:                                no - no EMM support!
Bulcrypt:                                no - no EMM support!
Griffin:                                 no - no EMM support!
DGCrypt:                                 no - no EMM support!

cardreader_phoenix:                      no
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_sci:                 no
cardreader_sc8in1:                       no
cardreader_mp35:                         no
cardreader_smargo:                       yes
cardreader_pcsc:                         no
cardreader_smartreader:                  yes
cardreader_db2com:                       no
cardreader_stapi:                        no
cardreader_stinger:                      no

 

[global]
logfile                       = stdout
nice                          = -1
preferlocalcards              = 1

[cache]

[newcamd]
port                          = 10110@0100:00006A
serverip                      = x.x.x.x
key                           = 0102030405060708091011121314

[cccam]
port                          = 13000
nodeid                        = 67B6084A10cxxxxxx
version                       = 2.1.4
reshare                       = -1

[webif]
httpport                      = xxx
httpuser                      = xxx
httppwd                       = xxx
httprefresh                   = 15
httpallowed                   = 192.168.1.0-192.168.1.254

 

# oscam.user

[account]
user                          = test
pwd                           = test
keepalive                     = 1
au                            = 1
group                         = 1

 

[reader]
label                         = Smart_01
protocol                      = smartreader
device                        = Serial:smart 01
services                      = canal_digitaal
caid                          = 0100
ecmwhitelist                  = 0100@00006A:64
ecmheaderwhitelist            = 800061006A00075C00,800061006A01075C00,803061006A00075C00,803061006A01075C00,810061006A00075C00,810061006A01075C00,813061006A00075C00,813061006A01075C00
detect                        = cd
mhz                           = 534
cardmhz                       = 369
ident                         = 0100:00006A
group                         = 1
emmcache                      = 1,1,0,0
blockemm-unknown              = 1
blockemm-g                    = 1
dropbadcws                    = 1
disablecrccws                 = 1
auprovid                      = 00006A
ratelimitecm                  = 4
ratelimittime                 = 9000
ecmunique                     = 1
srvidholdtime                 = 2000
cooldown                      = 30,600

 

# oscam.dvbapi

P:0100:00006A
I:0100:00006C

 

[canal_digitaal]
caid                          = 0100
provid                        =
srvid                         =
02c5,02da,02dc,07ee,0fa2,0fa3,ofab,0fac,ofad,0fcc,0fcd,0fcf,0fd0,13b0,13co,13c4,13c7,13c9,13ca,13cc,1415,1483,177a,177f,1789,178e,1793,179d,17b1,17b3,17b4,17b8,17co,17ca,17cc,17d7,17df,1b6c,1b6f,1b73,1b7c,1b82,1b8a,1b8c,1b8e,2014,2525,31ec,31ed,31ee,3201,3202,3252,3253,3357,3359,5144,5152,5154,515a,515e,5161,5162,5164,517e,5180,5182,51ae,51b3,51b5,51b8,51bd,51cc,51c7,51d1,51d4,51d5,51db,51dc,51e0,51e5,5149,5214,521c,5221,5225,5226,522b,5230,5235,523a,523f,5278,5284,6fee,6fef,6ff0,6ff1,6ff3,6fff,7007

 

•  

• 2015/03/11 23:05:55 8B75070 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2015/03/11 23:05:55 B7400860 r (reader) Smart_01 [smartreader] Reader initialized (device=Serial:smart 01, detect=cd, mhz= AUTO, cardmhz=369)
• 2015/03/11 23:05:55 B74012C0 r (reader) Smart_03 [smartreader] Reader initialized (device=Serial:smart 03, detect=cd, mhz= AUTO, cardmhz=369)
• 2015/03/11 23:05:55 B7400D90 r (reader) Smart_02 [smartreader] Reader initialized (device=Serial:smart 02, detect=cd, mhz= AUTO, cardmhz=369)
• 2015/03/11 23:05:56 B7400860 r (reader) Smart_01 [smartreader] card detected
• 2015/03/11 23:05:58 B7400860 r (reader) Smart_01 [smartreader] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
• 2015/03/11 23:05:58 B7400860 r (reader) Smart_01 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=1
• 2015/03/11 23:05:58 B7400860 r (reader) Smart_01 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
• 2015/03/11 23:05:58 B7400860 r (reader) Smart_01 [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=1 T=0 inv=0 parity=EVEN
• 2015/03/11 23:05:58 B7400860 r (reader) Smart_01 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
• 2015/03/11 23:05:59 B7400860 r (reader) Smart_01 [smartreader] detect seca/nagra tunneled card
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [smartreader] Nagra layer found
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [smartreader] Rom revision: DNASP400 RevI4A
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [smartreader] type: SECA, caid: 0100, serial: #########, card: Mediaguard v10.0
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [smartreader] found card system seca
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [seca] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [seca] Request provider 1
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [seca] provider 1: 0000, valid: 1, name: MANAGMENT, expiry date: 2015/05/08
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [seca] SA: ########
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [seca] PBM for provider 1: 799008001c000
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [seca] Request provider 2
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [seca] provider 2: 006A, valid: 1, name: CANALDIGITAAL, expiry date: 2015/05/03
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [seca] SA: ########
• 2015/03/11 23:06:00 B7400860 r (reader) Smart_01 [seca] PBM for provider 2: c280000000000000
• 2015/03/11 23:06:01 0 s (main) init for all local cards done
• 2015/03/11 23:06:01 0 s (emmcache) loaded 7 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2015/03/11 23:06:01 0 s (emmcache) loaded 4 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2015/03/11 23:06:01 0 s (anticasc) anti cascading disabled
• 2015/03/11 23:06:01 B7404AB8 c (newcamd) client connected to 10110 port
• 2015/03/11 23:06:01 B7404AB8 c (client) encrypted newcamd:10110-client 192.168.1.127 granted (test, au=auto (3 reader))
• 2015/03/11 23:06:01 B7404AB8 c (newcamd) user test authenticated successfully (CCcam)
• 2015/03/11 23:06:01 B7404AB8 c (newcamd) AU enabled for user test on reader Smart_01
• 2015/03/11 23:06:09 B7404AB8 c (ecm) test (0100&00006A/5C00/5225/64:752E60BB948A2C384CEF26A62859197B): found (297 ms) by Smart_01 - 5225 NPO 1 HD
• 2015/03/11 23:06:09 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:A5A8CB46B15857D35B0A74F153E0B047): found (292 ms) by Smart_01 - 5230 NPO 3 HD
• 2015/03/11 23:06:19 B7404AB8 c (ecm) test (0100&00006A/5C00/5225/64:B69F4C8510B3A35DBA6B38AC9FEA6669): found (296 ms) by Smart_01 - 5225 NPO 1 HD
• 2015/03/11 23:06:19 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:C4B0F85F3E9BB6676EAB26CA256E779F): found (292 ms) by Smart_01 - 5230 NPO 3 HD
• 2015/03/11 23:06:22 B7404AB8 c (ecm) test (0100&00006A/5C00/522B/64:BF3D611731E9FE6A44EE808FCB8879E2): found (296 ms) by Smart_01 - 522B Veronica/DisneyXD
• 2015/03/11 23:06:29 B7404AB8 c (ecm) test (0100&00006A/5C00/5225/64:CE65492016447310FCE7C6F35FBBC26F): found (301 ms) by Smart_01 - 5225 NPO 1 HD
• 2015/03/11 23:06:29 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:418F9607829A668BAA9EA5C6ECFDEF38): found (296 ms) by Smart_01 - 5230 NPO 3 HD
• 2015/03/11 23:06:29 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:2EC325D63DAB63A11330AE5826CA140D): rejected (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
• 2015/03/11 23:06:39 B7404AB8 c (ecm) test (0100&00006A/5C00/5225/64:D3D2F85051B8EE4ECAFF73E6E527DA46): found (302 ms) by Smart_01 - 5225 NPO 1 HD
• 2015/03/11 23:06:39 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:9E768DE902766C12AA30FCACA7383A23): found (304 ms) by Smart_01 - 5230 NPO 3 HD
• 2015/03/11 23:06:39 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:6C57FE32001C93198DA14675ABE3CE10): rejected (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
• 2015/03/11 23:06:49 B7404AB8 c (ecm) test (0100&00006A/5C00/5225/64:8AB01F9E6237F30C6FA75BDBC0338F50): found (302 ms) by Smart_01 - 5225 NPO 1 HD
• 2015/03/11 23:06:49 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:FCAF2F00EE6BEFC3BD83A061EC14C8CC): found (297 ms) by Smart_01 - 5230 NPO 3 HD
• 2015/03/11 23:06:49 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:274D3CBA4521A71FAFBBF4C362A3FFD5): rejected (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
• 2015/03/11 23:06:59 B7404AB8 c (ecm) test (0100&00006A/5C00/5225/64:C5447B557B031F2C966D141A0188C6B4): found (305 ms) by Smart_01 - 5225 NPO 1 HD
• 2015/03/11 23:06:59 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:1DF95F94D5F030DE3B2C156271166ACA): found (296 ms) by Smart_01 - 5230 NPO 3 HD
• 2015/03/11 23:06:59 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:0933824D5D1A2C40D15CF7A2F0909448): rejected (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
• 2015/03/11 23:07:09 B7404AB8 c (ecm) test (0100&00006A/5C00/5225/64:8ACD1D2B9D231DB13F5CEC3DC0BBF79D): found (301 ms) by Smart_01 - 5225 NPO 1 HD
• 2015/03/11 23:07:09 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:84DAA285625D707E15204E59A3D18FAA): found (296 ms) by Smart_01 - 5230 NPO 3 HD
• 2015/03/11 23:07:09 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:29EDB14D41BCC19541129A0DF2BD4738): rejected (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)
• 2015/03/11 23:07:19 B7404AB8 c (ecm) test (0100&00006A/5C00/5225/64:8FB1F03EBBF2E1EE71A66823C2A9C874): found (300 ms) by Smart_01 - 5225 NPO 1 HD
• 2015/03/11 23:07:19 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:8C956186723A6F09D389A33BAD169195): found (296 ms) by Smart_01 - 5230 NPO 3 HD
• 2015/03/11 23:07:19 B7404AB8 c (ecm) test (0100&00006A/5C00/5230/64:4CB443D9087804A29A7353F97CBFA615): rejected (0 ms) by Smart_01 - 5230 NPO 3 HD (Ratelimiter: no slots free!)

11 maart 2015 aangepast door fransken

[theparasol]

Welke box met cccam doet die 2 ecm request tegelijk voor NPO3.... zijn verschillende ecms, ecmunique grijpt in en zegt no slots free!

Staat permanent timeshift aan oid?

[fransken]

een xt9200 waar openpli 4.0 op staat van 2014-10-09 met cccam 2.3.0 met 1 Nregel

geen timeshift draait er heb wel 2 opnames lopen ga ik een 3de kijken komen er problemen

12 maart 2015 aangepast door fransken

[theparasol]

Naja, ik kan niet anders zeggen: terecht dat de ratelimiter ingrijpt. Deed hij dat niet dat gaat je smartcard in de penalty stand dat wil je al helemaal niet.

[fransken]

oke maar dan werkt de ratelimiter te goed of er zit een fout in mijn config
wat betekent

(0100&00006A/5C00/5230/64:4CB443D9087804A29A7353F97CBFA615)

en vooral 5C00 ,en volgens mij is 5230 de pid van NPO 3HD