Anticascading aanzetten ja of nee

[Ambilight]

Hallo ik hoor van een goed vriend van me dat dit weer speelt met oscam

 

dat je anti-cascading moet gebruiken

 

 

6640 die lijkt het meest stabiel en snel,

de laatste versies zijn nogal verkloot i.v.m. wijzigingen aan de reader mhz, het

schijnt dat bij de oudere versies hoe hoger het getal hoe lager hij eigenlijk is

en verder is iemand bezig had hele Makefile gebeuren aan tepassen dus beter ff wegblijven...

 

Mijn vraag Hoe werkt Anticascading precies

 

Anticasc

 

Section is needed if anticascading will be used to protect against unauthorized forwarding CardSharing.

[anticasc]

enabled =

numusers =

sampletime =

samples =

penalty =

aclogfile =

fakedelay =

denysamples =

 

enabled

parameter is required

enabled anti-cascading:

enabled = 1 # enabled

= 0 # disabled (default)

 

numusers

parameter is optional

anti-cascading: user per account (number)

numusers = 0 # anticascading disabled (default)

= 1 # cascading for 1 user allowed ==> (1*100+80)/(10*100/60) = 11 ecms allowed per minute

= 2 # cascading for 2 users allowed ==> (2*100+80)/(10*100/60) = 17 ecms allowed per minute

 

10 = number you have put in oscam.ac. Default value is 10

 

sampletime

parameter is optional

duration of sample in minutes:

sampletime = 5 # duration 5 minutes

= # [blank] duration 2 minutes (default)

 

Ex: numusers = 1 ==> 11 ecms * 5 minutes ==> 55 ecms allowed in 5 minutes

numusers = 2 ==> 17 ecms * 5 minutes ==> 85 ecms allowed in 5 minutes

 

samples

parameter is optional

number of additionnal ecms allowed (possible values between 2 and 10)

samples = 7 # 7 additional ecms allowed

= # [blank] 10 additional ecms allowed (default)

 

penalty

parameter is optional

Level of the penalty if the user exceeds the result shown in Ex on Sampletime

0 = only logging (default)

1 = send fake DWs

2 = ban user temporary

3 = send real DWs with delay (fakedelay)

 

penalty can be overwritten per user in oscam.user

aclogfile

parameter is optional

file for anti-cascading logging

aclogfile =

= # [blank] no logfile (default)

 

fakedelay

parameter is optional

fake delay time in milli seconds (possible values between 100 and 3000)

fakedelay = 500 # delay 500 milli seconds

= # [blank] 1000 milli seconds (default)

 

denysamples

parameter is optional

How many samples should be penalized?

denysamples = 10 # 10 samples will be penalized

= # [blank] 8 Samples will penalized (default)