CCcam herkend mijn kaart niet meer -Alignment trap issue ?

[silencer007]

Sinds kort een aantal issues (kaart werd eerst gedecteerd en viel later weg, daarna werd hij niet meer gedecteerd)

 

Smargo werkt perfect op mijn dreambox

card reader /dev/ttyUSB0

no or unknown card inserted

 

USB device wordt gedecteerd

 

Dmesg output:

 

ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected

<6>drivers/usb/serial/ftdi_sio.c: Detected FT232BM

<6>usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0

<6>usbcore: registered new interface driver ftdi_sio

<6>drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver

 

 

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

<4>Alignment trap: CCcam.armeb (838) PC=0x00079280 Instr=0xe18430b8 Address=0x41b109c1 FSR 0x813

 

Iets aan te doen (nslu2) ?