faq: Oscam compileren met de simplebuild van Gorgone

[Alex1970]

Dank je, Smartreader support is wel nu het belangrijkste voor me, ik heb een Triple reader op de Xtrend zitten met drie smartcards.

Maar wil de PCSC reader ook wle weer gebruiken (er komt een TV Vlaanderen kaart bij), dus interessant...

Het ging helemaal goed tot 'make install':
 

Making install in libusb
make[1]: Entering directory '/tmp/libusb-1.0.9/libusb'
make[2]: Entering directory '/tmp/libusb-1.0.9/libusb'
test -z "/opt/cross/mipsel-unknown-linux-gnu/mipsel-unknown-linux-gnu/sys-root/usr/lib" || /bin/mkdir -p "/opt/cross/mipsel-unknown-linux-gnu/mipsel-unknown-linux-gnu/sys-root/usr/lib"
/bin/mkdir: cannot create directory ‘/opt/cross/mipsel-unknown-linux-gnu’: Permission denied
Makefile:319: recipe for target 'install-libLTLIBRARIES' failed
make[2]: *** [install-libLTLIBRARIES] Error 1
make[2]: Leaving directory '/tmp/libusb-1.0.9/libusb'
Makefile:603: recipe for target 'install-am' failed
make[1]: *** [install-am] Error 2
make[1]: Leaving directory '/tmp/libusb-1.0.9/libusb'
Makefile:362: recipe for target 'install-recursive' failed
make: *** [install-recursive] Error 1

Toch weer iets met rechten? (Permission denied)

[Phoenixx]

Mooi zo, ik ben benieuwd of het proces nu afgerond wordt..

[Alex1970]

Nou, nog niet want ik heb niet alles kunnen afronden wat jij doorgegeven had.

[Phoenixx]

ok als het goed is zou het nu moeten werken..

[Phoenixx]

Support smargo reader file gevonden..

 

 

oscam-svn11685-Mipsel-emu-r798_libusb-pcsc.zip

[Alex1970]

Die 'make install' stap doorgekomen door 'sudo make install' te doen, maar nu loop ik weer vast bij 'wget https://alioth.debian.org/frs/download.php/3757/pcsc-lite-1.8.6.tar.bz2'

--2021-02-20 02:29:32--  https://alioth.debian.org/frs/download.php/3757/pcsc-lite-1.8.6.tar.bz2
Resolving alioth.debian.org (alioth.debian.org)... failed: Name or service not known.
wget: unable to resolve host address ‘alioth.debian.org’

 

29 minuten geleden, Phoenixx zei:

Support smargo reader file gevonden..

oscam-svn11685-Mipsel-emu-r798_libusb-pcsc.zip 835.39 kB · 0 downloads

 

Dank je, eens bekijken. Bron?

[Phoenixx]

https://alioth-archive.debian.org/releases/pcsclite/pcsclite/1.8.6/

[Alex1970]

44 minuten geleden, Phoenixx zei:

Support smargo reader file gevonden..

oscam-svn11685-Mipsel-emu-r798_libusb-pcsc.zip 835.39 kB · 2 downloads

Die doet het niet, ik moet oe20-mipsel hebben.

[Phoenixx]

Gevonden ..

 

This, for example, works for me:

cd /usr/src
svn co http://www.streamboard.tv/svn/oscam/trunk oscam-svn

cd oscam-svn

./config.sh --disable WITH_EMU WITH_SOFTCAM

cmake -DWEBIF=1 -DWITH_SSL=1
make USE_PCSC=1 USE_LIBUSB=1

 

nabling and disabling pcsc and libusb only correctly works with -DHAVE_PCSC=1 -DHAVE_LIBUSB=1

But when libusb and pcsc is enabled and compiled in the webif there is: reader support: NO. Normal if enabled, then must be reader support: yes and smartreader and pcsc both also des.

 

[Phoenixx]

You can change the config file /opt/s3/support/configs/plugin_update_toolchain.config:

 

Replace

Code

#PCSC-Lite 1.8.26

LIB_PCSC="1";

LIB_PCSC_name="PCSC-Lite";

LIB_PCSC_version="1.8.26";

LIB_PCSC_check="libpcsclite.pc";

LIB_PCSC_url="https://salsa.debian.org/api/v4/projects/19181/repository/archive.tar.bz2?sha=1359bce5050a487259d694e51751be0ec6f286e8";

LIB_PCSC_tasks=("export TOOLCHAIN=@TOOLCHAIN@;");

LIB_PCSC_tasks+=("export CC=@CC@;");

Cross Toolchain Template Menu

Completely new toolchains can be created in this menu. The functionality is provided by the crosstool-NG, Freetz-NG and Android NDK toolchain generators depending on the listed templates. You can choose from templates for crosstool-NG, Freetz-NG or Android NDK in order to create new or rebuild existing toolchains for s3. Toolchains based on these templates have already been tested and work for different systems. Please make sure that s3 is not executed as root or via sudo. This is not necessary and involves some security risks! If there are reasons to run as root, you can force it with the following command: ./s3 tcupdate --config "CTNG_BUILD_AS_ROOT" "1"

LIB_PCSC_tasks+=('export PATH="$TOOLCHAIN/bin:$PATH";');

LIB_PCSC_tasks+=("./configure --prefix=@PREFIX@/ --host=@HOST@ --disable-libudev --disable-libsystemd LIBUSB_LIBS=\"-L@PREFIX@/lib -lusb-1.0 -lrt\" LIBUSB_CFLAGS=\"-I@PREFIX@/include/libusb-1.0\";");

LIB_PCSC_tasks+=("make;");

LIB_PCSC_tasks+=("make install;");

LIB_PCSC_tasks+=("@VALIDATE@ "PCSC";");

 

 

https://github.com/gorgone/s3_releases/wiki/Toolchain-Update-Plugin-(s3.TUP)

 

 

Cross Toolchain Template Menu

Completely new toolchains can be created in this menu. The functionality is provided by the crosstool-NG, Freetz-NG and Android NDK toolchain generators depending on the listed templates. You can choose from templates for crosstool-NG, Freetz-NG or Android NDK in order to create new or rebuild existing toolchains for s3. Toolchains based on these templates have already been tested and work for different systems. Please make sure that s3 is not executed as root or via sudo. This is not necessary and involves some security risks! If there are reasons to run as root, you can force it with the following command: ./s3 tcupdate --config "CTNG_BUILD_AS_ROOT" "1"

 

 

20 februari 2021 aangepast door Phoenixx

[Alex1970]

Ik ben toch maar wat gaan slapen, maar ondanks die laatste aanpassingen wil het nog niet lukken.
Ik heb wel een build, maar daar zit nog steeds geen PCSC support in, laat staan Smartreader support.

12 uren geleden, Phoenixx zei:

 If there are reasons to run as root

 

Eh yeah, like a lot of errors!?!

Zoals dit (dat gebeurt er als ik s3 niet als root laat builden, ook als ik eerst ./s3 tcupdate --config "CTNG_BUILD_AS_ROOT" "1" gedaan heb 😞

HOSTCC	webif/pages_gen
GEN	webif/pages.c
GEN	Compressed 405392 template bytes into 165877 bytes. 239515 saved bytes (59.08%).
cc1: fatal error: opening output file build/mipsel-oe20-linux-gnu-ssl/module-webif-tpl.d: Permission denied
compilation terminated.
cc1: fatal error: opening output file build/mipsel-oe20-linux-gnu-ssl/webif/pages.d: Permission denied
compilation terminated.
Makefile:421: recipe for target 'build/mipsel-oe20-linux-gnu-ssl/module-webif-tpl.o' failed
make[1]: *** [build/mipsel-oe20-linux-gnu-ssl/module-webif-tpl.o] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:421: recipe for target 'build/mipsel-oe20-linux-gnu-ssl/webif/pages.o' failed
make[1]: *** [build/mipsel-oe20-linux-gnu-ssl/webif/pages.o] Error 1
Makefile:373: recipe for target 'all' failed
make: *** [all] Error 2

 

Door eerst sudo su uit te voeren en dan ./s3 menu krijg ik die errors niet.

20 februari 2021 aangepast door Alex1970

[Mimisiku]

hier even ter morele ondersteuning een net gebakken 11685 voor MipSel met Smargo/Stinger/PCSC/Phoenix support..

 

libpcsclite.so.1 en wellicht libssl.so.1.0.2 extra naar /usr/lib schrijven (Attr 755). te vinden in je ToolChain....

Net getest op mijn DM525-Combo met Ziggo

 

Gewoon de .zip achtervoegsel verwijderen (anders kan ik hem hier niet posten)

 

oscam-svn11685-dream_mipsel-webif-dvbapi-libusb-pcsc.zip

[Phoenixx]

Sudo su passwd en dan make install Alex, dan zou de  driver van de cardreader  moeten werken..

Make install word altijd als root gedaan bij linux..

 

Making install in libusb
make[1]: Entering directory '/tmp/libusb-1.0.9/libusb'
make[2]: Entering directory '/tmp/libusb-1.0.9/libusb'
test -z "/opt/cross/mipsel-unknown-linux-gnu/mipsel-unknown-linux-gnu/sys-root/usr/lib" || /bin/mkdir -p "/opt/cross/mipsel-unknown-linux-gnu/mipsel-unknown-linux-gnu/sys-root/usr/lib"
/bin/mkdir: cannot create directory ‘/opt/cross/mipsel-unknown-linux-gnu’: Permission denied
Makefile:319: recipe for target 'install-libLTLIBRARIES' failed
make[2]: *** [install-libLTLIBRARIES] Error 1
make[2]: Leaving directory '/tmp/libusb-1.0.9/libusb'
Makefile:603: recipe for target 'install-am' failed
make[1]: *** [install-am] Error 2
make[1]: Leaving directory '/tmp/libusb-1.0.9/libusb'
Makefile:362: recipe for target 'install-recursive' failed
make: *** [install-recursive] Error 1

20 februari 2021 aangepast door Phoenixx

[Alex1970]

Sorry, dat snap ik niet.
Ben ook eerlijk gezegd een beetje het spoor bijster.

Laten we ons eerst eens focussen op het bouwen van OSCam met Smartreader support.

 

Uiteindelijk wil ik OSCam met deze opties:
 

Version:        oscam-1.20_svn-r11666-798
Compiler:       mipsel-oe-linux
Box type:       et10000 (generic)
PID:            28216
TempDir:        /tmp/.oscam
GBox tmp_dir:   not defined using: /tmp/.oscam
ConfigDir:      /etc/tuxbox/config/oscam-emu/
WebifPort:      8081

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 no
SSL support:                             yes
DVB API support:                         yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
Irdeto guessing:                         yes
Anti-cascading support:                  yes
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  yes
Cache exchange AIO support:              yes
CW Cycle Check support:                  yes
LCD support:                             no
LED support:                             no
Clockfix with realtime clock:            no
IPv6 support:                            yes
Emulator support:                        yes
Built-in SoftCam.Key:                    yes

camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    yes
radegast:                                no
scam:                                    yes
serial:                                  no
constant CW:                             yes
Pandora:                                 no
ghttp:                                   no

Reader support:                          yes

Nagra:                                   yes
Nagra Merlin:                            yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                yes
Bulcrypt:                                yes
Griffin:                                 yes
DGCrypt:                                 yes

cardreader_phoenix:                      yes
cardreader_drecas:                       no
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_sci:                 yes
cardreader_sc8in1:                       no
cardreader_mp35:                         no
cardreader_smargo:                       yes
cardreader_pcsc:                         yes
cardreader_smartreader:                  yes
cardreader_db2com:                       no
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_stinger:                      yes

 

20 februari 2021 aangepast door Alex1970

[Phoenixx]

Weet ik Alex,

Met installeren is het altijd zo dat je met make install de installatie afrond en de lins ed op de juiste plaats zet met het script.

Vandaar op het end make install altijd als root..