geblokked beeld sasc-ng

satsatsat · 24 maart 2013

Ik krijg wel beeld maar 'geblokked' zodat er niet normaal naar te kijken is. Is dat op te lossen mbv settings?

Heb nogal een bijeengeraapte oude configuratie (door het os wat ik gebruik):

- Kubuntu 10.04 (linuxmce, http://linuxmce.org/)

- gebackporte kernel 3.0.0-32-generic (linux-image-generic-lts-backport-oneiric)

- octopus dvb-s2 met de media_build_experimental drivers (http://linuxtv.org/hg/~endriss/media_build_experimental) en de mutex patch (http://dolot.kipdola.com/wiki/Sasc-NG_met_een_3.8.x_kernel_op_Ubuntu_Precise_12.04_LTS#Source_Ophalen_en_Patchen)

- sasc-ng (3.6-or-lower-kernel https://github.com/bas-t/sasc.git met wat aanpassingen van de Makefiles ivm verwijzingen naar media_build_experimental)

- oscam

Iemand misschien een configuratie voor een gelijkende setup?

bvd

satsatsat · 24 maart 2013

en mythtv 0.23.0+fixes24158-0ubuntu2

Lamko · 25 maart 2013

Heb je de logs van sasc-ng en oscam al bekeken.

satsatsat · 25 maart 2013

Heb je de logs van sasc-ng en oscam al bekeken.

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Mar 25 17:03:35 2013
-------------------------------------------------------------------------------
2013/03/25 17:03:35 B772A6C0 s >> OSCam <<  cardserver started version 1.00-unstable_svn, build #4495 (i686-pc-linux)
2013/03/25 17:03:35 B772A6C0 s version=1.00-unstable_svn, build #4495, system=i686-pc-linux, nice=-1
2013/03/25 17:03:35 B772A6C0 s client max. idle=120 sec, debug level=0
2013/03/25 17:03:35 B772A6C0 s max. logsize=1024 Kb
2013/03/25 17:03:35 B772A6C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/03/25 17:03:35 B772A6C0 s auth size=4968
2013/03/25 17:03:35 B772A6C0 s Cannot open file "/usr/local/etc//oscam.services" (errno=2)
2013/03/25 17:03:35 B772A6C0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/03/25 17:03:35 B772A6C0 s signal handling initialized (type=sysv)
2013/03/25 17:03:35 B772A6C0 s can't open file "/usr/local/etc//oscam.srvid" (err=2), no service-id's loaded
2013/03/25 17:03:35 B772A6C0 s can't open file "/usr/local/etc//oscam.tiers" (err=2), no tier-id's loaded
2013/03/25 17:03:35 B772A6C0 s can't open file "/usr/local/etc//oscam.provid" (err=2), no provids's loaded
2013/03/25 17:03:35 B772A6C0 s can't open file "/usr/local/etc//oscam.ird" (errno=2) irdeto guessing not loaded
2013/03/25 17:03:35 B772A6C0 s monitor: disabled
2013/03/25 17:03:35 B772A6C0 s camd33: disabled
2013/03/25 17:03:35 B772A6C0 s camd35: disabled
2013/03/25 17:03:35 B772A6C0 s cs378x: disabled
2013/03/25 17:03:35 B772A6C0 s newcamd: initialized (fd=7, port=34000, crypted)
2013/03/25 17:03:35 B772A6C0 s CAID: 0100
2013/03/25 17:03:35 B772A6C0 s provid #0: 00006A
2013/03/25 17:03:35 B772A6C0 s cccam: initialized (fd=8, port=12001, crypted)
2013/03/25 17:03:35 B772A6C0 s radegast: disabled
2013/03/25 17:03:35 B772A6C0 s http thread started
2013/03/25 17:03:35 B772A6C0 s creating thread for device /dev/USBsc
2013/03/25 17:03:35 B772A6C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/03/25 17:03:35 B772A6C0 s waiting for local card init
2013/03/25 17:03:35 B7738280 h HTTP Server listening on port 81
2013/03/25 17:03:35 B74FF280 r reader thread started (thread=B74FF280, label=canaldigitaal, device=/dev/USBsc, detect=cd, mhz=358, cardmhz=358)
2013/03/25 17:03:37 B74FF280 r canaldigitaal card detected
2013/03/25 17:03:42 B74FF280 r ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6 
2013/03/25 17:03:43 B74FF280 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.58 Mhz
2013/03/25 17:03:44 B74FF280 r type: SECA, caid: 0100, serial: 571471074, card: Canal+ NL v10.0
2013/03/25 17:03:44 B74FF280 r [seca-reader] provider: 1, valid: 1, name: MANAGMENT, expiry date: 2013/05/25
2013/03/25 17:03:44 B74FF280 r [seca-reader] SA: 1107FA71
2013/03/25 17:03:44 B74FF280 r [seca-reader] provider: 2, valid: 1, name: CANALDIGITAAL, expiry date: 2013/05/16
2013/03/25 17:03:44 B74FF280 r [seca-reader] SA: 002C4D8F
2013/03/25 17:03:44 B74FF280 r providers: 2 (0000,006A)
2013/03/25 17:03:44 B74FF280 r [seca-reader] parental locked
2013/03/25 17:03:44 B74FF280 r [seca-reader] ready for requests
2013/03/25 17:03:44 B74FF280 r found cardsystem
2013/03/25 17:03:44 B74FF280 r [seca-reader] no PBM for provider 1
2013/03/25 17:03:44 B74FF280 r [seca-reader] PBM for provider 2: E000000000000000
2013/03/25 17:03:45 B772A6C0 s init for all local cards done
2013/03/25 17:03:45 B772A6C0 s anti cascading disabled
2013/03/25 17:03:55 B76F6280 c client connected to 34000 port
2013/03/25 17:03:55 B76F6280 c encrypted newcamd:34000-client 127.0.0.1 granted (user2, au=canaldigitaal)
2013/03/25 17:03:55 B76F6280 c user user2 authenticated successfully (generic)
2013/03/25 17:03:55 B76F6280 c AU enabled for user user2 on reader canaldigitaal
2013/03/25 17:05:55 B76F6280 c Connection closed to client
2013/03/25 17:05:55 B76F6280 c user2 disconnected  from 127.0.0.1
2013/03/25 17:05:55 B76F6280 c thread B76F6280 ended!
2013/03/25 17:06:41 B76F6280 c client connected to 34000 port
2013/03/25 17:06:41 B76F6280 c encrypted newcamd:34000-client 127.0.0.1 granted (user2, au=canaldigitaal)
2013/03/25 17:06:41 B76F6280 c user user2 authenticated successfully (generic)
2013/03/25 17:06:41 B76F6280 c AU enabled for user user2 on reader canaldigitaal
2013/03/25 17:06:41 B76F6280 c user2 (0100&00006A/17C0/64:6310): found (329 ms) by canaldigitaal (of 1 avail 1)
2013/03/25 17:06:46 B74FF280 r [seca-reader] provider: 2, valid: 1, name: CANALDIGITAAL, expiry date: 2013/05/26
2013/03/25 17:06:46 B74FF280 r [seca-reader] SA: 002C4D8F
2013/03/25 17:06:46 B74FF280 r user2 emmtype=shared, len=119, idx=0, cnt=1: written (421 ms) by canaldigitaal
2013/03/25 17:06:47 B76F6280 c user2 (0100&00006A/17C0/64:9C63): found (326 ms) by canaldigitaal (of 1 avail 1)
2013/03/25 17:06:57 B76F6280 c user2 (0100&00006A/17C0/64:4B64): found (326 ms) by canaldigitaal (of 1 avail 1)
2013/03/25 17:07:07 B76F6280 c user2 (0100&00006A/17C0/64:D6CD): found (326 ms) by canaldigitaal (of 1 avail 1)

Mar 25 17:03:55.324 : Version: 0.0.2-Unknown
Mar 25 17:03:55.325 CAM: initializing plugin: SoftCam (1.0.0pre-Unknown): A software emulated CAM
Mar 25 17:03:55.325 CAM(general.info): SC version 1.0.0pre-Unknown initializing (VDR 1.6.0)
Mar 25 17:03:55.326 CAM: starting plugin:
Mar 25 17:03:55.326 CAM(general.info): SC version 1.0.0pre-Unknown starting (VDR 1.6.0)
Mar 25 17:03:55.326 CAM(core.load): ** Plugin config:
Mar 25 17:03:55.327 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Mar 25 17:03:55.328 CAM(core.load): ** Local systems DON'T take priority over cached remote
Mar 25 17:03:55.328 CAM(core.load): ** Concurrent FF recordings are NOT allowed
Mar 25 17:03:55.328 CAM(core.load): ** Force transfermode with digital audio
Mar 25 17:03:55.329 CAM(core.load): ** ECM cache is set to enabled
Mar 25 17:03:55.329 CAM(core.load): ** TsBufferSize is 4 MB
Mar 25 17:03:55.329 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Mar 25 17:03:55.331 CAM(general.info): loading cardclient config from /usr/local/etc//cardclient.conf
Mar 25 17:03:55.332 CAM(cardclient.newcamd): now using protocol version 525 (cdLen=8)
Mar 25 17:03:55.332 CAM(cardclient.core): hostname=127.0.0.1 port=34000 emm=1 emmCaids 0100/ffff
Mar 25 17:03:55.332 CAM(cardclient.core): Newcamd: username=user2 password=xx key=xx
Mar 25 17:03:55.332 CAM(cardclient.core): client 'Newcamd' ready
Mar 25 17:03:55.333 CAM(core.net): connecting to 127.0.0.1:34000/tcp (127.0.0.1)
Mar 25 17:03:55.336 CAM(cardclient.login): Newcamd: CaID=0100 admin=1 srvUA=00000000220FF4E2 provider 00006A/00000000002C4D8F 000000/000000001107FA71
Mar 25 17:03:55.336 CAM(general.error): failed open /usr/local/etc//SoftCam.Key: No such file or directory
Mar 25 17:03:55.336 CAM(general.error): failed open /usr/local/etc//smartcard.conf: No such file or directory
Mar 25 17:03:55.337 CAM(general.error): failed open /usr/local/etc//cardslot.conf: No such file or directory
Mar 25 17:03:55.337 CAM(general.error): failed open /usr/local/etc//override.conf: No such file or directory
Mar 25 17:03:55.337 CAM(general.error): no keys loaded for softcam!
Mar 25 17:03:55.338 CAM(core.load): ** registered systems:
Mar 25 17:03:55.338 CAM(core.load): ** Cardclient        (pri -15)
Mar 25 17:03:55.338 CAM(core.load): ** Conax             (pri -10)
Mar 25 17:03:55.339 CAM(core.load): ** ConstCW           (pri -20)
Mar 25 17:03:55.339 CAM(core.load): ** Cryptoworks       (pri -10)
Mar 25 17:03:55.339 CAM(core.load): ** Irdeto            (pri -10)
Mar 25 17:03:55.341 CAM(core.load): ** Irdeto2           (pri  -8)
Mar 25 17:03:55.343 CAM(core.load): ** Nagra             (pri -10)
Mar 25 17:03:55.343 CAM(core.load): ** Nagra2            (pri -10)
Mar 25 17:03:55.344 CAM(core.load): ** Fake-NDS          (pri -12)
Mar 25 17:03:55.344 CAM(core.load): ** SC-Conax          (pri  -5)
Mar 25 17:03:55.344 CAM(core.load): ** SC-Cryptoworks    (pri  -5)
Mar 25 17:03:55.345 CAM(core.load): ** SC-Irdeto         (pri  -5)
Mar 25 17:03:55.345 CAM(core.load): ** SC-Nagra          (pri  -5)
Mar 25 17:03:55.346 CAM(core.load): ** SC-Seca           (pri  -5)
Mar 25 17:03:55.346 CAM(core.load): ** SC-Viaccess       (pri  -5)
Mar 25 17:03:55.346 CAM(core.load): ** SC-VideoGuard2    (pri  -5)
Mar 25 17:03:55.346 CAM(core.load): ** Seca              (pri -10)
Mar 25 17:03:55.347 CAM(core.load): ** @SHL              (pri -10)
Mar 25 17:03:55.347 CAM(core.load): ** Viaccess          (pri -10)
Mar 25 17:03:56.352 frontend: Starting thread on /dev/dvb/adapter2/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Mar 25 17:03:56.352 dvr: Starting thread on /dev/dvb/adapter2/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Mar 25 17:03:56.352 demux: Starting thread on /dev/dvb/adapter2/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Mar 25 17:03:56.354 : Listening on port 5456
Mar 25 17:04:25.466 CSA: Got command(2): I idx: 0 pid: 0
Mar 25 17:04:25.488 CSA: Got command(2): I idx: 0 pid: 0
Mar 25 17:04:25.517 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:04:26.085 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:04:26.239 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:04:26.240 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:04:26.337 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:04:26.352 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:04:26.353 CHANNEL: Tuning frontend (new)
Mar 25 17:04:26.353 CSA: Got command(2): I idx: 0 pid: 0
Mar 25 17:04:26.353 CHANNEL: Tuning frontend (new)
Mar 25 17:04:26.354 CSA: Got command(2): I idx: 0 pid: 0
Mar 25 17:05:27.015 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:05:27.113 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:05:27.128 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:05:27.129 CHANNEL: Tuning frontend (new)
Mar 25 17:05:27.129 CSA: Got command(2): I idx: 0 pid: 0
Mar 25 17:05:27.129 CHANNEL: Tuning frontend (new)
Mar 25 17:05:27.130 CSA: Got command(2): I idx: 0 pid: 0
Mar 25 17:05:27.706 CSA: Removing csa for rb: 2
Orbit: 00000282E
Mar 25 17:05:35.094 MSG: Got unprocessed message type: 1
Mar 25 17:05:35.095 MSG: Got unprocessed message type: 1
Mar 25 17:05:35.096 MSG: Got unprocessed message type: 1
Mar 25 17:05:35.096 MSG: Got unprocessed message type: 1
Mar 25 17:05:35.096 MSG: Got unprocessed message type: 1
Mar 25 17:05:35.097 MSG: Got unprocessed message type: 1
Mar 25 17:05:35.097 MSG: Got unprocessed message type: 1
Mar 25 17:05:55.342 CAM(core.net): idle timeout, disconnected 127.0.0.1:34000
Mar 25 17:06:37.428 CSA: Removing csa for rb: 2
Mar 25 17:06:37.435 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:06:37.533 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:06:37.549 CHANNEL: Clearing tuning cache due to switch cmd
Mar 25 17:06:37.549 CHANNEL: Tuning frontend (new)
Mar 25 17:06:37.549 CSA: Got command(2): I idx: 0 pid: 0
Mar 25 17:06:37.549 CHANNEL: Tuning frontend (new)
Mar 25 17:06:37.550 CSA: Got command(2): I idx: 0 pid: 0
Orbit: 00000235E
Mar 25 17:06:39.483 CHANNEL: Already seen sid: 6035
Mar 25 17:06:39.484 CHANNEL: Already seen sid: 6025
Mar 25 17:06:39.484 CHANNEL: Already seen sid: 6020
Mar 25 17:06:39.485 CHANNEL: Already seen sid: 6015
Mar 25 17:06:39.485 CHANNEL: Already seen sid: 6010
Mar 25 17:06:39.502 CHANNEL: Already seen sid: 6092
Mar 25 17:06:39.502 CHANNEL: Already seen sid: 6090
Mar 25 17:06:39.503 CHANNEL: Already seen sid: 6068
Mar 25 17:06:39.503 CHANNEL: Already seen sid: 6072
Mar 25 17:06:39.503 CHANNEL: Already seen sid: 6066
Mar 25 17:06:39.504 CHANNEL: Already seen sid: 6065
Mar 25 17:06:39.504 CHANNEL: Already seen sid: 6045
Mar 25 17:06:39.506 CHANNEL: Already seen sid: 6040
Mar 25 17:06:39.506 CAM(core.pids): 0: now tuned to source 88eb(S23.5E) transponder 33b1b
Mar 25 17:06:39.506 CAM: SC completed  Tune cmd
Mar 25 17:06:39.507 CAM(core.pids): 0: update SID 6080 (zero=0 noshift=0)
Mar 25 17:06:39.507 CAM(core.pids): 0: pids typ5=020d typ5=0069 typ5=002b typ5=0033
Mar 25 17:06:39.508 CAM(core.pids): SimplyCa entry pidCa=0
Mar 25 17:06:39.508 CAM(core.pids): prgca: 09 07 18 17 E7 16 02 00 6A 09 07 18 18 E7 29 02 00 6C 09 11 01 00 E7 16 00 6A FF FF E0 00 00 00 00 00 00 2E 79 09 11 01 00 E7 29 00 6C FF FF E0 00 00 00 00 00 00 2E 79 09 0F 05 00 E5 99 10 01 00 13 01 20 14 03 04 25 00 09 11 01 00 E7 16 00 6A FF FF E0 00 00 00 00 00 00 2E 79 09 11 01 00 E7 29 00 6C FF FF E0 00 00 00 00 00 00 2E 79 09 0F 05 00 E5 99 10 01 00 13 01 20 14 03 04 25 00
Mar 25 17:06:39.508 CAM(core.pids): pidca 020d: <empty>
Mar 25 17:06:39.508 CAM(core.pids): pidca 0069: <empty>
Mar 25 17:06:39.509 CAM(core.pids): pidca 002b: <empty>
Mar 25 17:06:39.509 CAM(core.pids): pidca 0033: <empty>
Mar 25 17:06:39.509 CAM(core.pids): SimplyCa exit pidCa=0
Mar 25 17:06:39.510 CAM(core.pids): prgca: 09 07 18 17 E7 16 02 00 6A 09 07 18 18 E7 29 02 00 6C 09 11 01 00 E7 16 00 6A FF FF E0 00 00 00 00 00 00 2E 79 09 11 01 00 E7 29 00 6C FF FF E0 00 00 00 00 00 00 2E 79 09 0F 05 00 E5 99 10 01 00 13 01 20 14 03 04 25 00 09 11 01 00 E7 16 00 6A FF FF E0 00 00 00 00 00 00 2E 79 09 11 01 00 E7 29 00 6C FF FF E0 00 00 00 00 00 00 2E 79 09 0F 05 00 E5 99 10 01 00 13 01 20 14 03 04 25 00
Mar 25 17:06:39.510 CAM(core.pids): pidca 020d: <empty>
Mar 25 17:06:39.510 CAM(core.pids): pidca 0069: <empty>
Mar 25 17:06:39.510 CAM(core.pids): pidca 002b: <empty>
Mar 25 17:06:39.511 CAM(core.pids): pidca 0033: <empty>
Mar 25 17:06:39.511 CAM(core.pids): 0: SID=6080 zero=0 | sid=-/-/- zero=-/-/- idle=-/-/-
Mar 25 17:06:39.511 CAM(core.pids): 0: found handler for SID 6080 (0.1 idle=1 idx=1)
Mar 25 17:06:39.511 CAM(core.ecm): 0.1: setting new SID 6080
Mar 25 17:06:39.512 CAM(core.pids): 0.1: pids on entry
Mar 25 17:06:39.512 CAM(core.pids): 0.1: pids after delete
Mar 25 17:06:39.512 CAM(core.pids): 0: descrambling pid 020d on index 1
Called cSascDvbDevice::SetCaPid
Mar 25 17:06:39.513 CSA: Got command(2): P idx: 1 pid: 525
Mar 25 17:06:39.514 CAM(core.pids): 0: descrambling pid 0069 on index 1
Called cSascDvbDevice::SetCaPid
Mar 25 17:06:39.514 CSA: Got command(2): P idx: 1 pid: 105
Mar 25 17:06:39.515 CAM(core.pids): 0: descrambling pid 002b on index 1
Called cSascDvbDevice::SetCaPid
Mar 25 17:06:39.516 CSA: Got command(2): P idx: 1 pid: 43
Mar 25 17:06:39.516 CAM(core.pids): 0: descrambling pid 0033 on index 1
Called cSascDvbDevice::SetCaPid
Mar 25 17:06:39.517 CSA: Got command(2): P idx: 1 pid: 51
Mar 25 17:06:39.517 CAM(core.pids): 0.1: pids after add typ5=020d typ5=0069 typ5=002b typ5=0033
Mar 25 17:06:39.517 CAM(core.ecm): 0.1: is no longer idle
Mar 25 17:06:39.517 MSG: Got unprocessed message type: 1
Mar 25 17:06:39.518 MSG: Got unprocessed message type: 1
Mar 25 17:06:39.518 MSG: Got unprocessed message type: 1
Mar 25 17:06:39.578 CAM(core.ecm): 0.1: triggered SID -1/6080 idx -1/1 mode -1/0 -
Mar 25 17:06:39.578 CAM(core.ecm): 0.1: new caDescr: 09 07 18 17 E7 16 02 00 6A 09 07 18 18 E7 29 02 00 6C 09 11 01 00 E7 16 00 6A FF FF E0 00 00 00 00 00 00 2E 79 09 11 01 00 E7 29 00 6C FF FF E0 00 00 00 00 00 00 2E 79 09 0F 05 00 E5 99 10 01 00 13 01 20 14 03 04 25 00 09 11 01 00 E7 16 00 6A FF FF E0 00 00 00 00 00 00 2E 79 09 11 01 00 E7 29 00 6C FF FF E0 00 00 00 00 00 00 2E 79 09 0F 05 00 E5 99 10 01 00 13 01 20 14 03 04 25 00
Mar 25 17:06:39.579 CAM(core.ecm): 0.1: CA descriptors for SID 6080 (len=128)
Mar 25 17:06:39.579 CAM(core.ecm): 0.1: descriptor 18 17 e7 16 02 00 6a
Mar 25 17:06:39.579 CAM(core.ecm): 0.1: found 1817(0000) (Nagra2) id 0000 with ecm 716/80 (new)
Mar 25 17:06:39.579 CAM(core.ecm): 0.1: descriptor 18 18 e7 29 02 00 6c
Mar 25 17:06:39.580 CAM(core.ecm): 0.1: found 1818(0000) (Nagra2) id 0000 with ecm 729/80 (new)
Mar 25 17:06:39.580 CAM(core.ecm): 0.1: descriptor 01 00 e7 16 00 6a ff ff e0 00 00 00 00 00 00 2e 79
Mar 25 17:06:39.580 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 006a with ecm 716/80 (dup) (new)
Mar 25 17:06:39.581 CAM(core.ecm): 0.1: descriptor 01 00 e7 29 00 6c ff ff e0 00 00 00 00 00 00 2e 79
Mar 25 17:06:39.581 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 006c with ecm 729/80 (dup) (new)
Mar 25 17:06:39.581 CAM(core.ecm): 0.1: descriptor 05 00 e5 99 10 01 00 13 01 20 14 03 04 25 00
Mar 25 17:06:39.582 CAM(core.ecm): 0.1: found 0500(0000) (Viaccess) id 42500 with ecm 599/80 (new)
Mar 25 17:06:39.582 CAM(core.ecm): 0.1: descriptor 01 00 e7 16 00 6a ff ff e0 00 00 00 00 00 00 2e 79
Mar 25 17:06:39.582 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 006a with ecm 716/80 (dup) (already present)
Mar 25 17:06:39.583 CAM(core.ecm): 0.1: descriptor 01 00 e7 29 00 6c ff ff e0 00 00 00 00 00 00 2e 79
Mar 25 17:06:39.583 CAM(core.ecm): 0.1: found 0100(0000) (Seca) id 006c with ecm 729/80 (dup) (already present)
Mar 25 17:06:39.583 CAM(core.ecm): 0.1: descriptor 05 00 e5 99 10 01 00 13 01 20 14 03 04 25 00
Mar 25 17:06:39.584 CAM(core.ecm): 0.1: found 0500(0000) (Viaccess) id 42500 with ecm 599/80 (already present)
Mar 25 17:06:39.584 CAM(core.ecm): 0.1: try system Nagra2 (1817) id 0000 with ecm 716 (pri=-10)
Mar 25 17:06:39.650 CAM(nagra.ecm): bad ECM message msgLen=101 sctLen=100
Mar 25 17:06:39.855 CAM(core.ecm): 0.1: try system Nagra2 (1818) id 0000 with ecm 729 (pri=-10)
Mar 25 17:06:39.929 CAM(core.au): 0: chain caid 0100 -> Seca(-10) Cardclient(-15) [00b6-82/ff/00] [00b7-84/ff/00] [00b8-84/ff/00] [00b9-84/ff/00] [00ba-84/ff/00] [00bb-84/ff/00]
Mar 25 17:06:39.929 CAM(core.au): 0: chain caid 0500 -> Viaccess(-10) [00aa-8b/fe/07]
Mar 25 17:06:39.930 CAM(core.au): 0: chain caid 0d96 -> none available
Mar 25 17:06:39.930 CAM(core.au): 0: chain caid 0624 -> Irdeto2(-8) Irdeto(-10) [1f41-82/ff/00]
Mar 25 17:06:39.930 CAM(core.au): 0: chain caid 1817 -> Nagra2(-10) [00b6-82/fe/00]
Mar 25 17:06:39.931 CAM(core.au): 0: chain caid 1818 -> Nagra2(-10) [00b6-82/fe/00]
Mar 25 17:06:39.931 CAM(core.au): 0: chain caid 1819 -> Nagra2(-10) [00b6-82/fe/00]
Mar 25 17:06:39.931 CAM(core.au): 0: chain caid 1817 ++ [00b6-82/fe/00] [00bc-82/fe/00]
Mar 25 17:06:39.932 CAM(core.au): 0: chain caid 1818 ++ [00b6-82/fe/00] [00bc-82/fe/00]
Mar 25 17:06:39.932 CAM(core.au): 0: chain caid 1819 ++ [00b6-82/fe/00] [00bc-82/fe/00]
Mar 25 17:06:39.932 CAM(core.au): 0: chain caid 1817 ++ [00b6-82/fe/00] [00bc-82/fe/00] [00bb-82/fe/00]
Mar 25 17:06:39.933 CAM(core.au): 0: chain caid 1818 ++ [00b6-82/fe/00] [00bc-82/fe/00] [00bb-82/fe/00]
Mar 25 17:06:39.933 CAM(core.au): 0: chain caid 1819 ++ [00b6-82/fe/00] [00bc-82/fe/00] [00bb-82/fe/00]
Mar 25 17:06:39.933 CAM(core.au): 0: chain caid 1817 ++ [00b6-82/fe/00] [00bc-82/fe/00] [00bb-82/fe/00] [00b7-82/fe/00]
Mar 25 17:06:39.934 CAM(core.au): 0: chain caid 1818 ++ [00b6-82/fe/00] [00bc-82/fe/00] [00bb-82/fe/00] [00b9-82/fe/00]
Mar 25 17:06:39.934 CAM(core.au): 0: chain caid 1819 ++ [00b6-82/fe/00] [00bc-82/fe/00] [00bb-82/fe/00] [00ba-82/fe/00]
Mar 25 17:06:39.934 CAM(core.au): 0: starting chain 1818
Mar 25 17:06:39.947 CAM(nagra.ecm): bad ECM message msgLen=103 sctLen=100
Mar 25 17:06:40.152 CAM(core.au): 0: starting chain 0100
Mar 25 17:06:40.152 CAM(core.ecm): 0.1: try system Seca (0100) id 006a with ecm 716 (pri=-10)
Mar 25 17:06:40.244 CAM(core.ecm): system: no key found for S 006A 0C
Mar 25 17:06:40.448 CAM(core.ecm): 0.1: try system Seca (0100) id 006c with ecm 729 (pri=-10)
Mar 25 17:06:40.541 CAM(core.ecm): system: no key found for S 006C 0C
Mar 25 17:06:40.745 CAM(core.au): 0: starting chain 0500
Mar 25 17:06:40.746 CAM(core.ecm): 0.1: try system Viaccess (0500) id 42500 with ecm 599 (pri=-10)
Mar 25 17:06:41.340 CAM(core.ecm): 0.1: try system Cardclient (0100) id 006a with ecm 716 (pri=-15)
Mar 25 17:06:41.451 CAM(cardclient.core): cc-loop
Mar 25 17:06:41.451 CAM(cardclient.core): now trying client Newcamd (127.0.0.1:34000)
Mar 25 17:06:41.452 CAM(core.net): connecting to 127.0.0.1:34000/tcp (127.0.0.1)
Mar 25 17:06:41.456 CAM(cardclient.login): Newcamd: CaID=0100 admin=1 srvUA=00000000220FF4E2 provider 00006A/00000000002C4D8F 000000/000000001107FA71
Mar 25 17:06:41.457 CAM(cardclient.newcamd): bad msgid 0002 != 0000 
Mar 25 17:06:41.457 CAM(cardclient.newcamd): msg ID sync error. Retrying...
Called cSascDvbDevice::SetCaDescr
Mar 25 17:06:41.789 CSA: Got command(2): E idx: 1 pid: 0 key: 4124...1f
Called cSascDvbDevice::SetCaDescr
Mar 25 17:06:41.790 CSA: Got command(2): O idx: 1 pid: 0 key: ea1a...19
Mar 25 17:06:41.791 CAM(core.ecm): cache add prgId=6080 source=88eb transponder=33b1b ecm=716/80
Mar 25 17:06:41.791 CAM(core.ecm): 0.1: correct key found
Mar 25 17:06:41.834 CSA: Creating csa for rb: 2
Mar 25 17:06:42.039 CSA: Removing csa for rb: 2
Mar 25 17:06:42.082 CSA: Creating csa for rb: 2
Orbit: 00000235E
Mar 25 17:06:42.491 CHANNEL: Already seen sid: 6092
Mar 25 17:06:42.491 CHANNEL: Already seen sid: 6090
Mar 25 17:06:42.491 CHANNEL: Already seen sid: 6068
Mar 25 17:06:42.492 CHANNEL: Already seen sid: 6072
Mar 25 17:06:42.492 CHANNEL: Already seen sid: 6066
Mar 25 17:06:42.493 CHANNEL: Already seen sid: 6045
Mar 25 17:06:42.493 CHANNEL: Already seen sid: 6040
Mar 25 17:06:42.493 CHANNEL: Already seen sid: 6030
Mar 25 17:06:42.494 MSG: Got unprocessed message type: 1
Mar 25 17:06:42.494 MSG: Got unprocessed message type: 1
Mar 25 17:06:42.494 MSG: Got unprocessed message type: 1
Mar 25 17:06:42.495 MSG: Got unprocessed message type: 1
Called cSascDvbDevice::SetCaDescr
Mar 25 17:06:43.846 CSA: Got command(2): E idx: 1 pid: 0 key: 4124...1f
Called cSascDvbDevice::SetCaDescr
Mar 25 17:06:43.847 CSA: Got command(2): O idx: 1 pid: 0 key: ea1a...19
Mar 25 17:06:47.099 CAM(core.load): saved ecm cache to /usr/local/etc//ecm.cache
Called cSascDvbDevice::SetCaDescr
Mar 25 17:06:47.255 CSA: Got command(2): O idx: 1 pid: 0 key: 86a8...d6
Called cSascDvbDevice::SetCaDescr
Mar 25 17:06:57.242 CSA: Got command(2): E idx: 1 pid: 0 key: 4d0a...b3
Mar 25 17:07:03.954 CSA: Removing csa for rb: 2
Called cSascDvbDevice::SetCaDescr
Mar 25 17:07:07.226 CSA: Got command(2): O idx: 1 pid: 0 key: 5fb4...77
Called cSascDvbDevice::SetCaDescr
Mar 25 17:07:17.218 CSA: Got command(2): E idx: 1 pid: 0 key: 6a9f...b4

Lamko · 25 maart 2013

Hmmm aan de logs niet veel te zien, heb je deze patch al eens geprobeerd :

http://dolot.kipdola.com/wiki/Install_SASC-NG#Configuring_and_compiling

satsatsat · 25 maart 2013

Hmmm aan de logs niet veel te zien, heb je deze patch al eens geprobeerd :

http://dolot.kipdola.com/wiki/Install_SASC-NG#Configuring_and_compiling

lijkt geen verschil te maken.

Lamko · 26 maart 2013

Heb je deze thread al gelezen :

http://www.sat4all.com/forums/topic/324586-iemand-sasc-ng-al-werkend-met-32-kernels/

Hier wordt ook aan de sasc-ng opstartopties gesleuteld zoals een buffer van 16M

bas.t · 26 maart 2013

Mijn ervaring is (met de kabel, ik heb geen sateliet) dat een geblokt beeld deze oorzaken kan hebben:

Slecte ontvangst (eventueel veroorzaakt door slechte bekabeling)
Een (eventueel deels) slechte dvb adapter, of driver voor die adapter
Een IO probleem, meestal de harde schijf of de controller ervan
Geen Nvidia gpu (in linux)
Een nvidia gpu die geen of onvoldoende vdpau ondersteunt in combinatie met een te langzame cpu
Te oude nvidia drivers (als je tenminste een nvidia gpu hebt)
Foutieve instellingen in xorg, mythtv en/of een combi van die twee
Het gebruik van Xbmc in combinatie met HD kanalen

Is wellicht één of meerdere van die mogelijkheden van toepassing?

Geblokt beeld ligt gewoonlijk niet aan sasc-ng of oscam, dat is meer een questie van 'het doet het (stabiel), of het doet het niet' en aangezien je beeld hebt en er geen rare dingen in je logs staan ga ik er van uit dat 'het het doet'.

En ook: hecht je erg aan je oude os?

Bas.

26 maart 2013 aangepast door bas.t

satsatsat · 26 maart 2013

Mijn ervaring is (met de kabel, ik heb geen sateliet) dat een geblokt beeld deze oorzaken kan hebben:

Slecte ontvangst (eventueel veroorzaakt door slechte bekabeling)

Een (eventueel deels) slechte dvb adapter, of driver voor die adapter

Een IO probleem, meestal de harde schijf of de controller ervan

Geen Nvidia gpu (in linux)

Een nvidia gpu die geen of onvoldoende vdpau ondersteunt in combinatie met een te langzame cpu

Te oude nvidia drivers (als je tenminste een nvidia gpu hebt)

Foutieve instellingen in xorg, mythtv en/of een combi van die twee

Het gebruik van Xbmc in combinatie met HD kanalen

Is wellicht één of meerdere van die mogelijkheden van toepassing?

Geblokt beeld ligt gewoonlijk niet aan sasc-ng of oscam, dat is meer een questie van 'het doet het (stabiel), of het doet het niet' en aangezien je beeld hebt en er geen rare dingen in je logs staan ga ik er van uit dat 'het het doet'.

En ook: hecht je erg aan je oude os?

Bas.

Bedankt voor je reactie.

Ik vermoed dat het niet aan de ontvangst ligt daar hij een FTA HD kanaal op dezelfde satelliet wel goed weer geeft.
Ik heb de nieuwste drivers en bij mijn weten is de octopus S2 een goede kaart, hij was iig niet goedkoop ;-)
Hoe kan ik een IO probleem testen? en kan dat het ook zijn als het op FTA wel goed gaat?
Ik heb een GF 520
er zit een i5 cpu in
nvidia driver: 304.84-0ubuntu1~lucid~xup1
ik gebruik de standaard instellingen van xorg en mythtv (0.23.0+fixes24158-0ubuntu2)

Qua OS zou ik wel willen upgraden maar deze versie is net een maand oud of zo... ze lopen helaas wat achter qua releases....

Hoor graag je reactie en of je misschien specifieke aanpassingen hebt die ik kan proberen. Ik draai iig jouw versie van sasc-ng.

dank

satsatsat · 28 maart 2013

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Je had helemaal gelijk. Het lag aan de ontvangst.

Het HD kanaal wat het wel deed had dezelfde signaal kwaliteit en SNR maar toen ik met femon keek zag ik dat de andere kanalen een hele hoge BER hadden.

Lamko · 28 maart 2013

Mooi dat het opgelost is ik ging er vanuit dat het daar niet aan lag. En dan blijft het gissen!

Inloggen

geblokked beeld sasc-ng

Aanbevolen berichten

satsatsat

satsatsat

Lamko

satsatsat

Lamko

satsatsat

Lamko

bas.t

satsatsat

satsatsat

Lamko

Maak een account aan of log in om te reageren

Account aanmaken

Inloggen

Wie is er online 0 leden

Overig

Activiteit