vu plus solo 2 Afstandsbediening VU2 Solo2 ook te gebruiken voor TV?

[Junos]

Hallo,

 

Kan er mij iemand zeggen hoe ik men afstandsbediening programmeer om ook men tv mee te kunnen bedienen? Is dit technisch mogelijk? (Er stak geen handleiding bij hierover)

 

Alvast bedankt,

Junos.

[Junos]

Hoi,

 

Ik heb het inmiddels al gevonden in de handleiding van de VU+, dus mijn excusues voor deze post.

Voor de geintereseerde:

 

2-7. Remote Control Unit (RCU)
Set-up

Vu+ RCU is a universal RCU that can be used for TV and STB at the same time.



A. User Guide of Vu+ Universal RCU



Pre-note



<< >> means long press

< > means normal press

4 digit code can be found in the TV brand code list of the user manual.



The new RCU of Vu+ is a universal type and you can control your Vu+ STB and TV
at the same time. This universal RCU is a modeless design. While offering the
basic control functions of your TV (TV Power, Volume +/-, Mute, AV), you can
control STB without having to select mode between TV and STB every time.
Compared to those universal RCU of mode selection types, the modeless universal
RCU of Vu+ is clearly a smarter choice by eliminating unneeded control
functions.



1. TV setting



Set-up Sequence: <<1 + 3>>, <4digit brand-code>,
<<Mute or Power>>

 

1. Press number 1and 3 for three seconds
   until LED is on.

 

1. Find your TV brand-code from the TV code
   list and insert 4 digit code.
   
   - If you press ¡°0000¡±, Full Automatic Scan will start. This will take a
   while.

 

1. Keep Mute button (or Power) pressed until
   your TV is muted (or turned off).

 

1. If your TV is muted (or turned off), stop
   pressing Mute button.

 

1. Now, your RCU is in test mode and press
   Volume + /- to check if your TV responds.

 

1. If the volume buttons are operational,
   Press <OK + STOP ( )> to escape from the set-up mode.

 

2. AV setting

AV button is for the selection of TV video source. AV button may be automatically
set up depending on TV models. In case it is not automatically configured,
please follow the instructions below.



Set-up Sequence    <<1 +
9>>, <<AV>>

 

1. Press 1 and 9 for three seconds until LED
   is turned on.

 

1. Keep AV button pressed until your TV
   responds and displays the video input source.

 

1. If AV button is working, check if AV
   button is properly working several times.

 

1. Press <OK + STOP ( )> to escape from
   the set-up mode.

 

3. RCU Buttons for TV

 

• Buttons for TV only: TV Power. AV

 

• Buttons switchable between TV and STB:
  Volume +/ - and Mute
  
  - These buttons are for STB only before the RCU set-up is done.
  
  - It is switchable only after the configuration is done.

 

• All the other buttons are for STB only

 

4. Mode Switch of Volume + / - and Mute

For the sake of easy volume control, please set the STB volume at 50% of the
maximum level and set this level as the default volume level from STB. Then,
you just have to control your TV volume only without having to adjust STB
volume at the same time.



Set-up Sequence:    <<1 + 6>>, <9>, <9>,
<3>, <TV Power or STB Power>

 

1. Press 1and 6 for three seconds until LED
   is on.

 

1. Press
   <9>, <9>, <3>.

 

1. If you want to control of TV volume, press
   TV Power button. If you want to control STB volume, press  STB Power button.

 

5. Reset
of TV Set-up

In case you want to reset the configured TV set-up of your RCU,

 

Press Sequence: <<1 + 6>>, <9>, <9>, <6>

 

1. Press 1and 6 for three seconds until LED
   is on.

 

1. Press
   <9>, <9>, <6>.

 

1. This will reverse the RCU into no
   configuration state.

 

6.
System Code Change.



You can change the system code of your Vu+ universal RCU according to the Vu+
model that you want to control. The default system code is Mode 2.



Mode 1 : SOLO / DUO

Mode 2 : UNO / Ultimo / SOLO2 / DUO2

Mode 3 & 4 : reserved for future models.



Press <<2 + 7>>, <HELP>, <0001 or 0002 or 0003 or
0004>

 

1. Press 2 and 7 for three seconds until LED
   is on.

 

1. Press HELP

 

1. Press
   <0001 or 0002 or 0003 or 0004>

 

[Gast Pedro Newbie]

-laat maar, al gevonden-

11 augustus 2013 aangepast door Pedro Newbie