OSCAM geeft spontaan problemen bij decoderen

Varkentjes · 22 juli 2013

Ik heb recent de configuratie op mijn DM8000 veranderd door van CCcam 2.3.0 naar OSCAM 1.20 over te gaan. Nu loop ik geregeld tegen het probleem aan dat het beeld blijft staan en ik geen kanalen meer kan openen. Zodra ik dan de softcam op de Dreambox waar terugzet op CCcam dan werkt alles weer gewoon.

Mijn situatie is als volgt:
1 Dreambox 8000 met Oscam 1.20 svn 8748 in de woonkamer
1 server op Ubuntu Linux met Oscam 1.20 svn 8748
1 oranje CD kaart aangesloten met Smargo reader op de server

Ik maak met de DM8000 verbinding met mijn eigen Linuxserver die op zijn beurt weer 2 dreamboxen moet aansturen, 1 in de woonkamer en 1 in de slaapkamer. Iemand enig idee wat er mis is en wat ik eraan kan doen? Ik kan de boxen wel op CCcam laten draaien, maar wil eigenlijk voor de eenvoud alles op Oscam zetten.

Ik heb 2 logfiles bijgevoegd, rond 21:45 gaat het weer mis en zet ik de Softcam weer terug op CCcam.

Log uit de DM8000:

2013/07/21 21:24:14        0   loadbalancer: statistic saved 6 records to /tmp/.oscam/stat in 0ms
2013/07/21 21:24:14   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (270 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:24:15   5361B8 c dvbapiau (0100&00006A/5C00/0FAC/64): found (292 ms) by OSCAM_server_Purk - Nederland 2
2013/07/21 21:24:24   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (271 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:24:25   5361B8 c dvbapiau (0100&00006A/5C00/0FAC/64): found (293 ms) by OSCAM_server_Purk - Nederland 2
2013/07/21 21:24:34   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (273 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:24:35   5361B8 c dvbapiau (0100&00006A/5C00/0FAC/64): found (292 ms) by OSCAM_server_Purk - Nederland 2
2013/07/21 21:24:44   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (274 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:24:45   5361B8 c dvbapiau (0100&00006A/5C00/0FAC/64): found (292 ms) by OSCAM_server_Purk - Nederland 2
2013/07/21 21:24:54   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (273 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:24:55   5361B8 c dvbapiau (0100&00006A/5C00/0FAC/64): found (294 ms) by OSCAM_server_Purk - Nederland 2
2013/07/21 21:25:04   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (271 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:25:14   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (262 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:25:24   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (267 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:25:34   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (261 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:25:44   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (262 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:25:54   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (263 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:26:04   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (266 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:26:14   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (261 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:26:24   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (262 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:26:34   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (260 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:26:44   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (267 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:42:04        0   --- Skipped 1 duplicated log lines ---
2013/07/21 21:42:04   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (267 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:42:14   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (262 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:42:25   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (263 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:42:35   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (262 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:42:45   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (267 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:42:55   5361B8 c dvbapiau (0100&00006A/5C00/0FCC/64): found (262 ms) by OSCAM_server_Purk - RTL 4
2013/07/21 21:43:15        0   --- Skipped 1 duplicated log lines ---
2013/07/21 21:43:15        0   --- Skipped 1 duplicated log lines ---
2013/07/21 21:43:21   5361B8 c [DVBAPI] Tuner sends PMT command 3 for channel 0FAC
2013/07/21 21:43:21   5361B8 c [ADD PID 0] CAID: 1817 ECM_PID: 070C PROVID: 00006A
2013/07/21 21:43:21   5361B8 c [ADD PID 1] CAID: 1818 ECM_PID: 0720 PROVID: 00006C
2013/07/21 21:43:21   5361B8 c [ADD PID 2] CAID: 1819 ECM_PID: 0734 PROVID: 00006D
2013/07/21 21:43:21   5361B8 c [ADD PID 3] CAID: 0100 ECM_PID: 0644 PROVID: 00006A
2013/07/21 21:43:21   5361B8 c [sKIP STREAM 0] CAID: 0100 ECM_PID: 070C PROVID: 00006A
2013/07/21 21:43:21   5361B8 c [ADD PID 4] CAID: 0100 ECM_PID: 070C PROVID: 00006A
2013/07/21 21:43:21   5361B8 c [ADD PID 5] CAID: 0100 ECM_PID: 0720 PROVID: 00006C
2013/07/21 21:43:21   5361B8 c [ADD PID 6] CAID: 0500 ECM_PID: 057C PROVID: 042500
2013/07/21 21:43:21   5361B8 c [ADD PID 7] CAID: 0100 ECM_PID: 0734 PROVID: 00006D
2013/07/21 21:43:21   5361B8 c [ADD PID 8] CAID: 0500 ECM_PID: 0590 PROVID: 042500
2013/07/21 21:43:21   5361B8 c [ADD STREAM 3] CAID: 0100 ECM_PID: 0644 PROVID: 00006A
2013/07/21 21:43:21   5361B8 c [sKIP STREAM 0] CAID: 0100 ECM_PID: 070C PROVID: 00006A
2013/07/21 21:43:21   5361B8 c [ADD STREAM 4] CAID: 0100 ECM_PID: 070C PROVID: 00006A
2013/07/21 21:43:21   5361B8 c [ADD STREAM 5] CAID: 0100 ECM_PID: 0720 PROVID: 00006C
2013/07/21 21:43:21   5361B8 c [ADD STREAM 6] CAID: 0500 ECM_PID: 057C PROVID: 042500
2013/07/21 21:43:21   5361B8 c [ADD STREAM 7] CAID: 0100 ECM_PID: 0734 PROVID: 00006D
2013/07/21 21:43:21   5361B8 c [ADD STREAM 8] CAID: 0500 ECM_PID: 0590 PROVID: 042500
2013/07/21 21:43:21   5361B8 c Found 9 ECMpids and 4 STREAMpids in PMT
2013/07/21 21:43:21   5361B8 c New program number: 0FAC (Nederland 2) [pmt_list_management 3]
2013/07/21 21:43:21   5361B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/07/21 21:43:21   5361B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2013/07/21 21:43:22   5361B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/07/21 21:43:22   5361B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2013/07/21 21:43:22   5361B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/07/21 21:43:23   5361B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2013/07/21 21:43:23   5361B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/07/21 21:43:23   5361B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2013/07/21 21:43:23   5361B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/07/21 21:43:24   5361B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2013/07/21 21:43:24   5361B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/07/21 21:43:24   5361B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2013/07/21 21:43:25   5361B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

Log uit de server:

2013/07/21 21:41:55 B7A17D78 c dm8000 (0100&00006A/5C00/0FCC/64): found (264 ms) by smargo1 (L/1/2/2) - RTL 4
2013/07/21 21:42:05 B7A17D78 c dm8000 (0100&00006A/5C00/0FCC/64): found (258 ms) by smargo1 (L/1/2/2) - RTL 4
2013/07/21 21:42:16 B7A17D78 c dm8000 (0100&00006A/5C00/0FCC/64): found (270 ms) by smargo1 (L/1/2/2) - RTL 4
2013/07/21 21:42:26 B7A17D78 c dm8000 (0100&00006A/5C00/0FCC/64): found (269 ms) by smargo1 (L/1/2/2) - RTL 4
2013/07/21 21:42:35 B7A17D78 c dm8000 (0100&00006A/5C00/0FCC/64): found (264 ms) by smargo1 (L/1/2/2) - RTL 4
2013/07/21 21:42:46 B7A17D78 c dm8000 (0100&00006A/5C00/0FCC/64): found (270 ms) by smargo1 (L/1/2/2) - RTL 4
2013/07/21 21:42:56 B7A17D78 c dm8000 (0100&00006A/5C00/0FCC/64): found (268 ms) by smargo1 (L/1/2/2) - RTL 4
2013/07/21 21:43:06 B7A17D78 c dm8000 (0100&00006A/5C00/0FCC/64): found (257 ms) by smargo1 (L/1/2/2) - RTL 4
2013/07/21 21:43:15 B7A17D78 c dm8000 (0100&00006A/5C00/0FCC/64): found (258 ms) by smargo1 (L/1/2/2) - RTL 4
2013/07/21 21:43:21 B7A17D78 c dm8000 (0100&00006A/FD10/0FAC/64): rejected group (0 ms) - Nederland 2 (no matching reader)
2013/07/21 21:43:21 B7A17D78 c dm8000 (0100&00006A/FD10/0FAC/64): rejected group (1 ms) - Nederland 2 (no matching reader)
2013/07/21 21:43:21 B7A17D78 c dm8000 (0100&00006A/FD10/0FAC/64): rejected group (0 ms) - Nederland 2 (no matching reader)
2013/07/21 21:43:21 0 --- Skipped 47 duplicated log lines ---
2013/07/21 21:43:21 B7A17D78 c dm8000 (0100&00006A/FD10/0FAC/64): rejected group (1 ms) - Nederland 2 (no matching reader)
2013/07/21 21:43:21 B7A17D78 c dm8000 (0100&00006A/FD10/0FAC/64): rejected group (0 ms) - Nederland 2 (no matching reader)
2013/07/21 21:43:21 B7A17D78 c dm8000 (0100&00006A/FD10/0FAC/64): rejected group (1 ms) - Nederland 2 (no matching reader)
2013/07/21 21:43:21 B7A17D78 c dm8000 (0100&00006A/FD10/0FAC/64): rejected group (0 ms) - Nederland 2 (no matching reader)
2013/07/21 21:43:21 0 --- Skipped 22 duplicated log lines ---
2013/07/21 21:45:51 B7A17D78 c dm8000 (0100&00006A/5C00/0FAC/64): found (304 ms) by smargo1 (L/1/2/2) - Nederland 2
2013/07/21 21:46:00 B7A17D78 c dm8000 (0100&00006A/5C00/0FAC/64): found (267 ms) by smargo1 (L/1/2/2) - Nederland 2
2013/07/21 21:46:11 B7A17D78 c dm8000 (0100&00006A/5C00/0FAC/64): found (276 ms) by smargo1 (L/1/2/2) - Nederland 2
2013/07/21 21:46:20 B7A17D78 c dm8000 (0100&00006A/5C00/0FAC/64): found (266 ms) by smargo1 (L/1/2/2) - Nederland 2
2013/07/21 21:46:30 B7A17D78 c dm8000 (0100&00006A/5C00/0FAC/64): found (272 ms) by smargo1 (L/1/2/2) - Nederland 2
2013/07/21 21:46:40 B7A17D78 c dm8000 (0100&00006A/5C00/0FAC/64): found (265 ms) by smargo1 (L/1/2/2) - Nederland 2
2013/07/21 21:46:50 B7A17D78 c dm8000 (0100&00006A/5C00/0FAC/64): found (268 ms) by smargo1 (L/1/2/2) - Nederland 2
2013/07/21 21:47:00 B7A17D78 c dm8000 (0100&00006A/5C00/0FAC/64): found (265 ms) by smargo1 (L/1/2/2) - Nederland 2
2013/07/21 21:47:10 B7A17D78 c dm8000 (0100&00006A/5C00/0FAC/64): found (271 ms) by smargo1 (L/1/2/2) - Nederland 2
2013/07/21 21:47:20 B7A17D78 c dm8000 (0100&00006A/5C00/0FAC/64): found (265 ms) by smargo1 (L/1/2/2) - Nederland 2

Kabeltje87 · 22 juli 2013

Respons tijden tussen de 260 en 280 ms.

Zwaar overclockt?

Indien zo: dit leidt tot problemen, met missende ECM's en lange lock tijden.

Willy

22 juli 2013 aangepast door Kabeltje87

Varkentjes · 22 juli 2013

Dit had dit in de server ingesteld:

mhz = 961
cardmhz = 686

Heb ze beide eens op 500 gezet, maar dat maakt geen verschil. ECM tijden zijn in CCcam nu rond de 330, maar met Oscam krijg ik nog steeds geen beeld.

Kan het niet iets zijn met dat de Oscam client een verkeerde decodering aanvraagt aan de server? Kanalen met FD10 in de regel openen niet, met 5C00 opent hij wel.

alias haha · 22 juli 2013

Post je configs eens

Varkentjes · 22 juli 2013

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8748
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
nice           = -1
logfile           = /cf/log/oscam/oscam.log
ecmfmt           = c&0p/i/s/l
loghistorysize       = 4096
maxlogsize       = 1000
disablelog       = 0
disableuserfile       = 0
waitforcards       = 1
preferlocalcards   = 1
readerrestartseconds   = 4
clienttimeout       = 6000
clientmaxidle       = 300
fallbacktimeout       = 1600
sleep = 0
failbantime       = 15
failbancount       = 4
dropdups       = 1
double_check = 0
lb_mode           = 1
lb_save           = 100
lb_reopen_mode       = 1
lb_max_ecmcount       = 20
lb_retrylimit       = 1600
lb_savepath       = /tmp/.oscam/stat
lb_max_readers       = 5

[monitor]
port           = 16500
nocrypt           = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
monlevel       = 4
hideclient_to       = 15

[webif]
httpport       = 16200
httpuser       = ********
httppwd           = ********
httprefresh       = 20
httpallowed       = 0.0.0.0-255.255.255.255
httphelplang       = en

[cccam]
port           = 12000
version           = 2.3.0
reshare           = 4
keepconnected       = 1

[dvbapi]
enabled           = 1
user           = dvbapi
au           = 1
request_mode       = 1
boxtype           = dreambox
reopenonzap       = 1

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8748
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.user.txt

# is needed for au
[account]
user           = dvbapi
description       = lokaal
caid           = 0100
au           = dm8000_lower_slot
group           = 1,10
ident           = 0100:00006A
monlevel       = 0

# for using mpcsmon
[account]
user           = usermonitor
pwd           = password
uniq           = 3
sleep           = 5
group           = 1,10
monlevel       = 4

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8748
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt

[reader]
label           = dm8000_lower_slot
enable           = 0
description       = lower
protocol       = internal
device           = /dev/sci0
detect           = cd
cardmhz           = 500
mhz           = 369
services       = canal_digitaal_nl_entertainment,canal_digitaal_nl_hdtv
caid           = 0100
ident           = 0100:00006A
group           = 1
auprovid       = 00006A
emmcache       = 1,3,2
ecmwhitelist       = 0100@00006A:64
ecmheaderwhitelist   = 803061006A00075C00,813061006A00075C00,800061006A00075C00,810061006A00075C00
ratelimitecm       = 4
ratelimitseconds   = 9
cooldown       = 60,600
blockemm-g       = 1
blockemm-unknown   = 1
dropbadcws       = 1

[reader]
label           = OSCAM_server_Purk
enable           = 1
protocol       = cccam
device           = purk,12000
user           = dm8000
password       = dm8000_01
inactivitytimeout   = 1
group           = 10
cccversion              = 2.1.2
ccckeepalive       = 1

alias haha · 22 juli 2013

Probeer eens met services te werken, dan kun je er nog meer uit filteren, heb in de services de sd zenders uitgefilterd

Aanvinken bij users

[Canaldigitaal_HD]
caid                          = 0100
provid                        = 00006A
srvid                         = 1B7B,17C0,5230,1B6C,5217,17CA,5212,1B7C,522B,521C,13B1,07DF,07E4,0FAF,6FF1,6FF0,6FFF,6FEF,6FF3,0FAE,7007,07F4,31F9,07FA,07EF,07E9,1B62,1B67,141F,51D4,13C0,13B9,6FB8,1B7D,2349,07EA,07FB,1799,179E,1B63,1B72,1B7E,13B2,13C9,1421,51D3,13AA,1415,1419,177F,177A,1784,1789,178E,1793,17AC,1B71,1B7D,1F47,232A,2B01,2B33,31E8,51D1,5142,5144,5146,5154,51CC,5221,31FC,17B1,13AE,13BD,334F,5226,51D3,51E0,51C2,2525,219F,3335,0041,17AC,179D,1798,17A2,0046,31FA,0037,17B8,07FD,17D7.51D3,17CC,51C7,17B2,17B3,17B4,17B2,17B3,17B4,51DB,51B8,51AE,51B3,515A,51BD,07FF,07F3

Kabeltje87 · 22 juli 2013

Ik heb hier niets van dat alles instaan. Enkel man-x om deze eruit te filteren (heb ik niet) en op de tweede kaart laat ik enkel de zenders van de tweede kaart van TVV opvragen.

label                         = smargo1
description                   = TVV 2de kaart
protocol                      = smargo
device                        = /dev/ttyUSB0
services                      = tvv_2de_kaart,!man-x
caid                          = 0100
detect                        = cd
mhz                           = 480
cardmhz                       = 480
ident                         = 0100:00006C
group                         = 2
emmcache                      = 1,1,15
lb_weight                     = 1000
ratelimitecm                  = 4
ratelimitseconds              = 10
ecmunique                     = 1
srvidholdseconds              = 2

[reader]
label                         = smargo2
description                   = TVV
protocol                      = smargo
device                        = /dev/ttyUSB1
services                      = !man-x
caid                          = 0100
detect                        = cd
mhz                           = 480
cardmhz                       = 480
ident                         = 0100:00006C
group                         = 1
emmcache                      = 1,1,15
lb_weight                     = 1000
ratelimitecm                  = 4
ratelimitseconds              = 10
ecmunique                     = 1
srvidholdseconds              = 2

[account]
user                          = lokaal
pwd                           = password
description                   = lokaal
au                            = Boven,Onder,smargo1,smargo2
betatunnel                    = 1833.FFFF:1702,1834.FFFF:1722
group                         = 1,2,3,4,5
cccreshare                    = 0
cccignorereshare              = 1

#P:0100:00006a   #Verwijder deze regel als je TV-Vlaanderen hebt!
P:0100:00006c   #Verwijder deze regel als je CDS NL hebt!
I:0622
I:1817
I:1818
I:1819

[global]
disablelog                    = 1
logfile                       = /dev/tty
unlockparental                = 1
preferlocalcards              = 1
lb_mode                       = 1
lb_stat_cleanup               = 24
failbantime                   = 30
failbancount                  = 4

[tvv_2de_kaart]
caid                          = 0100
provid                        = 00006C
srvid                         = 17A7,1B76,31EC,31ED,31EE,31F2,31F3,31F5,3201,3202,3208,320A,320C,320E,3214,323D,325D,5221,5226,5276,5278,527A,527C,527C,527E,5280,5282,5286,52B7,52B8


[man-x]
caid                          = 0100
provid                        = 00006C
srvid                         = 5284

En dat is het. Niets anders. (behalve nog 3 interne klanten - mijn andere boxen)

werkt al een trein. De juiste build van Oscam weet ik niet, daar ik de versie gebruik uit de feed van OpenPLi, en daar staat geen build nr in.

Willy

22 juli 2013 aangepast door Kabeltje87

DoeEensGek · 22 juli 2013

Je kan je versie zien door naar de webif te gaan, bovenste regel.

De nieuwste oscam bevat weer patches van parasol voor dvbapi, misschien helpt het bij jouw probleem.

Varkentjes · 22 juli 2013

Oké alle overbodige regels overboord gegooid en weer opnieuw begonnen met de basis uit de sticky van Michel.

oscam.dvbapi:

P:0100:00006a
I:0622
I:1817
I:1818
I:1819

oscam.conf:

[global]
disablelog        = 0
logfile            = /cf/log/oscam/oscam.log
ecmfmt            = c&0p/i/s/l
unlockparental        = 1
preferlocalcards    = 1
lb_mode            = 1
lb_stat_cleanup        = 24
failbantime        = 30
failbancount        = 4

[monitor]
port            = 16500
nocrypt            = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
monlevel        = 4
hideclient_to        = 15

[webif]
httpport        = 16200
httpuser        = *******
httppwd            = *******
httprefresh        = 20
httpallowed        = 0.0.0.0-255.255.255.255
httphelplang        = en

[dvbapi]
enabled            = 1
user            = dvbapi
au            = 1
request_mode        = 1
boxtype            = dreambox
reopenonzap        = 1

oscam.user

# is needed for au
[account]
user            = dvbapi
description        = lokaal
caid            = 0100
au            = 1
group            = 10
ident            = 0100:00006A
monlevel        = 0

# for using mpcsmon
[account]
user            = usermonitor
pwd            = password
uniq            = 3
sleep            = 5
group            = 10
monlevel        = 4

[account]
user            = purk
pwd            = purk_01
hostname        = purk
uniq            = 3
keepalive        = 1
group            = 10
monlevel        = 0
cccmaxhops        = 5
cccreshare        = 3
cccignorereshare    = -1

oscam.server

[reader]
label            = OSCAM_server_Purk
protocol        = cccam
device            = purk,12000
user            = dm8000
password        = dm8000_01
services        =
inactivitytimeout    = 1
reconnecttimeout    = 30
disableserverfilter    = 1
caid            =
ident            =
group            = 10
emmcache        = 1,3,2
ecmcache        = 1
lb_weight        = 100
cccversion              = 2.3.0
cccmaxhops        = 5
cccdisableautoblock    = 1
ccckeepalive        = 1

Logfile:

2013/07/22 14:22:17 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r8748 (mipsel-unknown-linux-gnu)
2013/07/22 14:22:17 2AE00B70 c Found 9 ECMpids and 4 STREAMpids in PMT
2013/07/22 14:22:17 2AE00B70 c New program number: 0FAB (1817:0FAB unknown) [pmt_list_management 3]
2013/07/22 14:22:17 2AE00B70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/07/22 14:22:17 2AE00B70 c [DVBAPI] Demuxer #0 impossible to descramble PID #5 CAID 0100 PROVID 00006C ECMPID 071F (NO MATCHING READER)
2013/07/22 14:22:17 2AE00B70 c [DVBAPI] Demuxer #0 impossible to descramble PID #6 CAID 0100 PROVID 00006D ECMPID 0733 (NO MATCHING READER)
2013/07/22 14:22:17 2AE00B70 c [DVBAPI] Demuxer #0 impossible to descramble PID #7 CAID 0500 PROVID 042500 ECMPID 057B (NO MATCHING READER)
2013/07/22 14:22:17 2AE00B70 c [DVBAPI] Demuxer #0 impossible to descramble PID #8 CAID 0500 PROVID 042500 ECMPID 058F (NO MATCHING READER)
2013/07/22 14:22:17 2AE00B70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2013/07/22 14:22:17 2AE00B70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/07/22 14:22:18 2AE00B70 c [DVBAPI] Demuxer #0 impossible to descramble PID #5 CAID 0100 PROVID 00006C ECMPID 071F (NO MATCHING READER)
2013/07/22 14:22:18 2AE00B70 c [DVBAPI] Demuxer #0 impossible to descramble PID #6 CAID 0100 PROVID 00006D ECMPID 0733 (NO MATCHING READER)
2013/07/22 14:22:18 2AE00B70 c [DVBAPI] Demuxer #0 impossible to descramble PID #7 CAID 0500 PROVID 042500 ECMPID 057B (NO MATCHING READER)
2013/07/22 14:22:18 2AE00B70 c [DVBAPI] Demuxer #0 impossible to descramble PID #8 CAID 0500 PROVID 042500 ECMPID 058F (NO MATCHING READER)
2013/07/22 14:22:18 2AE00B70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
2013/07/22 14:22:18 2AE00B70 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 0100 PROVID 00006A ECMPID 0643 ANY CHID
2013/07/22 14:22:18 2AE00B70 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 0100 PROVID 00006A ECMPID 070B ANY CHID
2013/07/22 14:22:21 2AE00B70 c dvbapi (0100&00006A/FD10/0FAB/64): rejected (2855 ms) by OSCAM_server_Purk - Nederland 1
2013/07/22 14:22:21 2AE00B70 c dvbapi (0100&00006A/FD10/0FAB/64): rejected group (1 ms) - Nederland 1 (no matching reader)
2013/07/22 14:22:22 2AE00B70 c dvbapi (0100&00006A/5C00/0FAB/64): found (3567 ms) by OSCAM_server_Purk - Nederland 1
2013/07/22 14:22:28 2AE00B70 c dvbapi (0100&00006A/5C00/0FAB/64): found (710 ms) by OSCAM_server_Purk - Nederland 1
2013/07/22 14:22:38 2AE00B70 c dvbapi (0100&00006A/5C00/0FAB/64): found (323 ms) by OSCAM_server_Purk - Nederland 1
2013/07/22 14:22:48 2AE00B70 c dvbapi (0100&00006A/5C00/0FAB/64): found (319 ms) by OSCAM_server_Purk - Nederland 1
2013/07/22 14:22:58 2AE00B70 c dvbapi (0100&00006A/5C00/0FAB/64): found (323 ms) by OSCAM_server_Purk - Nederland 1
2013/07/22 14:23:08 2AE00B70 c dvbapi (0100&00006A/5C00/0FAB/64): found (319 ms) by OSCAM_server_Purk - Nederland 1
2013/07/22 14:23:18 2AE00B70 c dvbapi (0100&00006A/5C00/0FAB/64): found (319 ms) by OSCAM_server_Purk - Nederland 1
2013/07/22 14:23:28 2AE00B70 c dvbapi (0100&00006A/5C00/0FAB/64): found (319 ms) by OSCAM_server_Purk - Nederland 1
2013/07/22 14:23:38 2AE00B70 c dvbapi (0100&00006A/5C00/0FAB/64): found (323 ms) by OSCAM_server_Purk - Nederland 1
2013/07/22 14:23:48 2AE00B70 c dvbapi (0100&00006A/5C00/0FAB/64): found (319 ms) by OSCAM_server_Purk - Nederland 1
2013/07/22 14:23:58 2AE00B70 c dvbapi (0100&00006A/5C00/0FAB/64): found (319 ms) by OSCAM_server_Purk - Nederland 1

Bij de rode regels gaat het mis en dan blijft hij vaak hangen. Pas na 3x herstarten van de softcam kreeg ik bovenstaand resultaat en heb ik weer beeld. Mijn smartcard kan dus geen FD10 decoderen maar wel 5C00. Hoe krijg ik Oscam nu zo ingesteld dat hij eerst op 5C00 aanvraagt, net zoals CCcam dat doet?

Kabeltje87 · 22 juli 2013

Je kan je versie zien door naar de webif te gaan, bovenste regel.

De nieuwste oscam bevat weer patches van parasol voor dvbapi, misschien helpt het bij jouw probleem.

Neen hoor:

OSCAM 1.20-unstable_svn build r0

Willy

Toppers · 22 juli 2013

Kijk even hier bij reactie 4 :

http://www.sat4all.com/forums/topic/334113-freezes-met-oscam-120-8664-op-vu-solo2/

Wil je meer uitvoerige settings PM mij even, ik heb totaal geen freezes en/of blackscreens en gebruik de laatste Oscam binary met CWC-check

johnhothost · 22 juli 2013

Dit had dit in de server ingesteld:

mhz = 961

cardmhz = 686

Heb ze beide eens op 500 gezet, maar dat maakt geen verschil. ECM tijden zijn in CCcam nu rond de 330, maar met Oscam krijg ik nog steeds geen beeld.

Kan het niet iets zijn met dat de Oscam client een verkeerde decodering aanvraagt aan de server? Kanalen met FD10 in de regel openen niet, met 5C00 opent hij wel.

Zet dit er maar in dan gaan de FD10 en FC10 wel open

ecmheaderwhitelist =

0100@00006A:803061006A00075C00,813061006A00075C00,810061006A00075C00,800061006A00075C00,800061006A0000FD10,810061006A0000FD10,800061006A0000FC10,810061006A0000FC10

22 juli 2013 aangepast door johnhothost

Varkentjes · 22 juli 2013

Ik heb de kaart even in de box gehad en een reader als volgt aangemaakt:

[reader]
label            = dm8000_lower_slot
description        = lower
protocol                = internal
device            = /dev/sci0
caid                          = 0100
detect                        = cd
mhz                           = 500
cardmhz                       = 500
ident                         = 0100:00006A
group                         = 1
emmcache                      = 1,1,15
ecmheaderwhitelist = 0100@00006A:803061006A00075C00,813061006A00075C00,810061006A00075C00,800061006A00075C00,0100@00006A:800061006A0000FD10,810061006A0000FD10,800061006A0000FC10,810061006A0000FC10
lb_weight                     = 1000
ratelimitecm                  = 4
ratelimitseconds              = 10
ecmunique                     = 1
srvidholdseconds              = 2

Ondanks die ecmheaderwhitelist blijft de box op FD10 aanvragen en blijft de kaart deze hardnekkig weigeren. Is mijn kaart dan niet in orde of ondersteunt hij dit type aanvragen niet?

Bareus · 22 juli 2013

Fd10 is volgens mij ook geen s3 maar 2... En als ik zo lees heb jij een s3card

Varkentjes · 22 juli 2013

Ja zoiets vermoed ik dus ook, maar ik kon tot op heden nog geen bevestiging vinden van de betekenis van die Chids. Maar is het in Oscam dan ook mogelijk om het systeem te dwingen in seca3 te decoderen ipv seca2? Met CCcam gaat dat automatisch, maar ik wil dat ook graag met Oscam.

Inloggen

OSCAM geeft spontaan problemen bij decoderen

Aanbevolen berichten

Varkentjes

Kabeltje87

Varkentjes

alias haha

Varkentjes

alias haha

Kabeltje87

DoeEensGek

Varkentjes

Kabeltje87

Toppers

johnhothost

Varkentjes

Bareus

Varkentjes

Maak een account aan of log in om te reageren

Account aanmaken

Inloggen

Wie is er online 0 leden

Gerelateerde inhoud

OScam binaries 1 2

oscam.user CHID = 0100:001b90,001b91,001b95,0017d7,0051da,005276,005278,00527c,005280,005282,005286,005287,0052da,005221,005226 werkt niet

TiVuSAT ervaring 1 2 3 4 10

Synology NAS 1 2

OSCAM - TVHeadend en KabelNoord

kaart digiturk oscam

OScam Libs Armhf

Overig

Activiteit