Ga naar inhoud


VU+Uno: Beeld blokt tijdens opname

Drs. IJzerbout

Door Drs. IJzerbout
in Vu Plus

 Delen

Aanbevolen berichten

Drs. IJzerbout Superster

Drs. IJzerbout

Geplaatst:
Geplaatst:

Hallo,

 

Sinds enkele weken heb ik een nieuwe woning in Dubai betrokken. Hier is geen satelliet aansluiting en moest dus (helaas) overstappen naar de kabel van Etisalat.

Daarom heb ik een DVB-C/DVB-t kabeltuner voor mijn VU+Uno besteld en onlangs ingebouwd. De oude DVB-S tuner is er dus uit. De nieuwe tuner: "VU+ Advanced Pluggable Tuner DVB-T2/T/C" kwam in een orgineel ongeopend VU+ doosje van een betrouwbare VU+ handelaar in Dubai.

De ongecodeerde digitale kabelkanalen doen het uitstekend waaronder de MBC & DMI kanalen en ARD/ZDF.

Gisteren wilde ik voor het eerst sinds de nieuwe kabeltuner erin zit een film opnemen en heb een opname gestart. Het beeld begon onmiddelijk te blokken en te stotteren totdat ik de opname weer stopte.

Dus het probleem treedt uitsluitend tijdens een opname op, op zowel SD als HD programma´s

Ik heb eergisteren de laatste VTi 7.0.x.x geladen van 17.09 via de feed. Dit ging probleemloos.

Oude opnames die via satelliet kwamen doen het prima. Voordat ik de kabeltuner erin gebouwd heb had ik geen enkel probleem. De HD is 2TB van Samsung en 10% vol.

 

Kan iemand mij vertellen wat de oorzaak van dit probleem is?

"On ne voit bien qu'avec le coeur. L'essentiel est invisible pour les yeux."


Tonskidutch Superster

Tonskidutch

Geplaatst:
Geplaatst:

als je eens wilt proberen; herstart de receiver en ga via telnet op de Uno en geef eens het commando dmesg >

 

je krijgt dan een hele waslijst die je in een .txt plakt en hier als bijlage toevoegt.

 

je kunt wellicht ook zelf al zien dat dmesg na het herstarten van de UNO toont welke devices / apparaten aan geroepen worden en of er rare meldingen komen

 

doe je dat ook een keer tijdens dat een opname loopt, kun je misschien iets heel specifieks ontdekken.

 

het is me tot nog toe niet ter ore gekomen dat een nieuwe dvb-t/t2/c tuner dit effect had

I Am Gone Love You

JESTOFUNK

 

Drs. IJzerbout Superster

Drs. IJzerbout

Geplaatst:
  • Auteur
Geplaatst:

Ik heb een telnet verbinding opgebouwd via DCCE2 en na het ingeven van het commando: "dmesg"  krijg ik een hele waslijst aan gegevens.

Maar hoe krijg ik die lijst via kut & peest gekopieerd?

Ik kan die lijst niet markeren. Rechtermuisknop doet niets.

"On ne voit bien qu'avec le coeur. L'essentiel est invisible pour les yeux."

Tonskidutch Superster

Tonskidutch

Geplaatst:
Geplaatst:

juist, het is in DCC_E2 beperkt

ik deed dat al lang niet meer in DCC

je markeert met de muis een stukje + tikt dan ctrl A opdat ie alles selecteert

dan ctrl C copy (net als in andere windows texteditors)

 

en dat peest je in een notepad of andere editor...

 

(met dat programma putty is het overigens een heel stuk makkelijker)

ciao

I Am Gone Love You

JESTOFUNK

 

Drs. IJzerbout Superster

Drs. IJzerbout

Geplaatst:
  • Auteur
Geplaatst:

OK,

 

hier zijn de gegevens via telnet en het commando: dmesg  zonder opname. Beeld is prima

 

Date:         Tuesday, 23 September 2014 - 16:51:52
Architecture: mips
OS:           Linux
Kernel:       3.9.6
Kernel build: #1 SMP Wed Aug 6 14:50:17 CEST 2014

vuuno login: root


  www.vuplus-support.org
          home of

 /$$    /$$ /$$$$$$$$ /$$
| $$   | $$|__  $$__/|__/
| $$   | $$   | $$    /$$
|  $$ / $$/   | $$   | $$
 \  $$ $$/    | $$   | $$
  \  $$$/     | $$   | $$
   \  $/      | $$   | $$
    \_/       |__/   |__/

   Welcome on your Vu+ !

root@vuuno:~# dmesg
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
TCP: cubic registered
ata1.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
NET: Registered protocol family 17
Key type dns_resolver registered
EBI CS0: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000001
B4: NandSelect=40000101, nandConfig=15142200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=15142200
Block size=00020000, erase shift=17
NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS0

Found NAND on CS0: ACC=f7ff1010, cfg=15142200, flashId=ecf10095, tim1=4232222d, tim2=00000d94
BrcmNAND version = 0x0302 128MB @00000000
B4: NandSelect=40000101, nandConfig=15142200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=15142200
Found NAND flash on Chip Select 0, chipSize=128MB, usable size=128MB, base=0
brcmnand_scan: B4 nand_select = 40000101
brcmnand_scan: After nand_select = 40000101
page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 128MB @18000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS0
Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS0
nand_read_bbt: Bad block at 0x00f00000
Creating 8 MTD partitions on "brcmnand.0":
0x000000000000-0x000007200000 : "rootfs"
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
usb 1-2: new high-speed USB device number 2 using ehci-brcm
0x000007200000-0x000007600000 : "kernel"
0x000007600000-0x000007a00000 : "boot"
0x000007a00000-0x000007c00000 : "splash"
0x000007c00000-0x000007d00000 : "cfe"
0x000007d00000-0x000007d80000 : "mac"
0x000007d80000-0x000007e00000 : "env"
0x000007e00000-0x000007f00000 : "nvm"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd0 to ubi0
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD204UI  1AQ1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
scsi2 : usb-storage 1-2:1.0
ata2: SATA link down (SStatus 4 SControl 300)
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 114 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 911, bad PEBs: 1, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 28/7, WL threshold: 4096, image sequence number: 1930832360
UBI: available PEBs: 0, total reserved PEBs: 911, PEBs reserved for bad PEB handling: 19
ALSA device list:
UBI: background thread "ubi_bgt0d" started, PID 51
  No soundcards found.
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 52
scsi 2:0:0:0: Direct-Access     General  USB Flash Disk   1.0  PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 111357952 bytes (106 MiB, 877 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 9B47E78E-2036-4BB4-942A-FF9FBA3D578F, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
Freeing unused kernel memory: 292k freed
NET: Registered protocol family 10
procmk_init
dvb_bcm7413: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (vuuno)
enable MII = 0
NEXUS_Frontend_GetUserParameters 0 0
bcm7413: hotplug_callback():
Hotplug - status.connected 0
[GPIO]Default
[GPIO]RST Default
[GPIO]fpga secu
[GP]:brcm_pwm_init

bcm7413: hotplug_callback():
Hotplug - status.connected 1
bcm7413: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
brcm_demux_init: $Id: bcm7335_demux.c,v 0.6 $
[VID]: 6bcm7335_video_init
[AUD]: 6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
bcm7413: bcm7335_frontend_init(): vtuner1 : 2
[MPVR]: >> misc_pvr_init
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
[CI]:0 1

[CI]: registered ci0 0
[CI]: registered ci1 0
[DFP]: registered dbox fp
[DFP]: Scart 9597 is found 4

[sC]: registered sci0
[sC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
fpga update driver loaded
udevd (112): /proc/112/oom_adj is deprecated, please use /proc/112/oom_score_adj instead.
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0
[LCD]: unknown cmd 0x1015
[CI]:ci_dev_open

[CI]:entering.. A NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card insertion status changed

[CI]:entering.. B NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card B insertion status changed

[CI]: CI interface initialised

[CI]:ci1_dev_open

[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -840466976
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER -840466976
[AUD]: AUDIO_SET_MIXER : amixl 13, amixr 13
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER : next left volume -998, right volume -998
FE tune c
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1  0
[VID]: VIDEO_PLAY 1  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
[VID]: VIDEO_GET_SIZE aspect: 1 3
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune c
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1  0
[VID]: VIDEO_PLAY 1  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune c
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1  0
[VID]: VIDEO_PLAY 1  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
FE tune c
FE tune c
root@vuuno:~#

---------------------------------------------------------------------------------------------------------------

En hier tijdens opname (ZDF) beeld blokt en stottert:

 

Date:         Tuesday, 23 September 2014 - 16:51:52
Architecture: mips
OS:           Linux
Kernel:       3.9.6
Kernel build: #1 SMP Wed Aug 6 14:50:17 CEST 2014

vuuno login: root


  www.vuplus-support.org
          home of

 /$$    /$$ /$$$$$$$$ /$$
| $$   | $$|__  $$__/|__/
| $$   | $$   | $$    /$$
|  $$ / $$/   | $$   | $$
 \  $$ $$/    | $$   | $$
  \  $$$/     | $$   | $$
   \  $/      | $$   | $$
    \_/       |__/   |__/

   Welcome on your Vu+ !

root@vuuno:~# dmesg
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
hidraw: raw HID events driver © Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
TCP: cubic registered
ata1.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
NET: Registered protocol family 17
Key type dns_resolver registered
EBI CS0: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000001
B4: NandSelect=40000101, nandConfig=15142200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=15142200
Block size=00020000, erase shift=17
NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS0

Found NAND on CS0: ACC=f7ff1010, cfg=15142200, flashId=ecf10095, tim1=4232222d, tim2=00000d94
BrcmNAND version = 0x0302 128MB @00000000
B4: NandSelect=40000101, nandConfig=15142200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=15142200
Found NAND flash on Chip Select 0, chipSize=128MB, usable size=128MB, base=0
brcmnand_scan: B4 nand_select = 40000101
brcmnand_scan: After nand_select = 40000101
page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 128MB @18000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS0
Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS0
nand_read_bbt: Bad block at 0x00f00000
Creating 8 MTD partitions on "brcmnand.0":
0x000000000000-0x000007200000 : "rootfs"
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
usb 1-2: new high-speed USB device number 2 using ehci-brcm
0x000007200000-0x000007600000 : "kernel"
0x000007600000-0x000007a00000 : "boot"
0x000007a00000-0x000007c00000 : "splash"
0x000007c00000-0x000007d00000 : "cfe"
0x000007d00000-0x000007d80000 : "mac"
0x000007d80000-0x000007e00000 : "env"
0x000007e00000-0x000007f00000 : "nvm"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd0 to ubi0
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD204UI  1AQ1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
scsi2 : usb-storage 1-2:1.0
ata2: SATA link down (SStatus 4 SControl 300)
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 114 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 911, bad PEBs: 1, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 28/7, WL threshold: 4096, image sequence number: 1930832360
UBI: available PEBs: 0, total reserved PEBs: 911, PEBs reserved for bad PEB handling: 19
ALSA device list:
UBI: background thread "ubi_bgt0d" started, PID 51
  No soundcards found.
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 52
scsi 2:0:0:0: Direct-Access     General  USB Flash Disk   1.0  PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 111357952 bytes (106 MiB, 877 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 9B47E78E-2036-4BB4-942A-FF9FBA3D578F, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
Freeing unused kernel memory: 292k freed
NET: Registered protocol family 10
procmk_init
dvb_bcm7413: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (vuuno)
enable MII = 0
NEXUS_Frontend_GetUserParameters 0 0
bcm7413: hotplug_callback():
Hotplug - status.connected 0
[GPIO]Default
[GPIO]RST Default
[GPIO]fpga secu
[GP]:brcm_pwm_init

bcm7413: hotplug_callback():
Hotplug - status.connected 1
bcm7413: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
brcm_demux_init: $Id: bcm7335_demux.c,v 0.6 $
[VID]: 6bcm7335_video_init
[AUD]: 6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
bcm7413: bcm7335_frontend_init(): vtuner1 : 2
[MPVR]: >> misc_pvr_init
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
[CI]:0 1

[CI]: registered ci0 0
[CI]: registered ci1 0
[DFP]: registered dbox fp
[DFP]: Scart 9597 is found 4

[sC]: registered sci0
[sC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
fpga update driver loaded
udevd (112): /proc/112/oom_adj is deprecated, please use /proc/112/oom_score_adj instead.
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0
[LCD]: unknown cmd 0x1015
[CI]:ci_dev_open

[CI]:entering.. A NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card insertion status changed

[CI]:entering.. B NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card B insertion status changed

[CI]: CI interface initialised

[CI]:ci1_dev_open

[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -840466976
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER -840466976
[AUD]: AUDIO_SET_MIXER : amixl 13, amixr 13
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER : next left volume -998, right volume -998
FE tune c
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1  0
[VID]: VIDEO_PLAY 1  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
[VID]: VIDEO_GET_SIZE aspect: 1 3
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune c
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1  0
[VID]: VIDEO_PLAY 1  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune c
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1  0
[VID]: VIDEO_PLAY 1  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
FE tune c
FE tune c
root@vuuno:~#
root@vuuno:~# dmesg
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
TCP: cubic registered
ata1.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
NET: Registered protocol family 17
Key type dns_resolver registered
EBI CS0: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000001
B4: NandSelect=40000101, nandConfig=15142200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=15142200
Block size=00020000, erase shift=17
NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS0

Found NAND on CS0: ACC=f7ff1010, cfg=15142200, flashId=ecf10095, tim1=4232222d, tim2=00000d94
BrcmNAND version = 0x0302 128MB @00000000
B4: NandSelect=40000101, nandConfig=15142200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=15142200
Found NAND flash on Chip Select 0, chipSize=128MB, usable size=128MB, base=0
brcmnand_scan: B4 nand_select = 40000101
brcmnand_scan: After nand_select = 40000101
page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 128MB @18000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Bad block table Bbt0 found at page 0000ffc0, version 0x01 for chip on CS0
Bad block table 1tbB found at page 0000ff80, version 0x01 for chip on CS0
nand_read_bbt: Bad block at 0x00f00000
Creating 8 MTD partitions on "brcmnand.0":
0x000000000000-0x000007200000 : "rootfs"
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
usb 1-2: new high-speed USB device number 2 using ehci-brcm
0x000007200000-0x000007600000 : "kernel"
0x000007600000-0x000007a00000 : "boot"
0x000007a00000-0x000007c00000 : "splash"
0x000007c00000-0x000007d00000 : "cfe"
0x000007d00000-0x000007d80000 : "mac"
0x000007d80000-0x000007e00000 : "env"
0x000007e00000-0x000007f00000 : "nvm"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd0 to ubi0
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD204UI  1AQ1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
scsi2 : usb-storage 1-2:1.0
ata2: SATA link down (SStatus 4 SControl 300)
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 114 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 911, bad PEBs: 1, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 28/7, WL threshold: 4096, image sequence number: 1930832360
UBI: available PEBs: 0, total reserved PEBs: 911, PEBs reserved for bad PEB handling: 19
ALSA device list:
UBI: background thread "ubi_bgt0d" started, PID 51
  No soundcards found.
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 52
scsi 2:0:0:0: Direct-Access     General  USB Flash Disk   1.0  PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 111357952 bytes (106 MiB, 877 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 9B47E78E-2036-4BB4-942A-FF9FBA3D578F, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
Freeing unused kernel memory: 292k freed
NET: Registered protocol family 10
procmk_init
dvb_bcm7413: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (vuuno)
enable MII = 0
NEXUS_Frontend_GetUserParameters 0 0
bcm7413: hotplug_callback():
Hotplug - status.connected 0
[GPIO]Default
[GPIO]RST Default
[GPIO]fpga secu
[GP]:brcm_pwm_init

bcm7413: hotplug_callback():
Hotplug - status.connected 1
bcm7413: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
brcm_demux_init: $Id: bcm7335_demux.c,v 0.6 $
[VID]: 6bcm7335_video_init
[AUD]: 6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
bcm7413: bcm7335_frontend_init(): vtuner1 : 2
[MPVR]: >> misc_pvr_init
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
[CI]:0 1

[CI]: registered ci0 0
[CI]: registered ci1 0
[DFP]: registered dbox fp
[DFP]: Scart 9597 is found 4

[sC]: registered sci0
[sC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
fpga update driver loaded
udevd (112): /proc/112/oom_adj is deprecated, please use /proc/112/oom_score_adj instead.
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with writeback data mode
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0
[LCD]: unknown cmd 0x1015
[CI]:ci_dev_open

[CI]:entering.. A NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card insertion status changed

[CI]:entering.. B NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card B insertion status changed

[CI]: CI interface initialised

[CI]:ci1_dev_open

[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -840466976
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER -840466976
[AUD]: AUDIO_SET_MIXER : amixl 13, amixr 13
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER : next left volume -998, right volume -998
FE tune c
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1  0
[VID]: VIDEO_PLAY 1  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
[VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
[VID]: VIDEO_GET_SIZE aspect: 1 3
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune c
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1  0
[VID]: VIDEO_PLAY 1  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune c
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1  0
[VID]: VIDEO_PLAY 1  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
FE tune c
FE tune c
[VID]: VIDEO_STOP 1  1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 aph=0x0
[AUD]: AUDIO_CONTINUE aph=0 0 0
FE tune c
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 1
[VID]: VIDEO_FREEZE 1  0
[VID]: VIDEO_PLAY 1  5 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xe0d128f4
[AUD]: Mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
FE tune c
FE tune c
FE tune c
FE tune c
FE tune c
FE tune c
FE tune c
FE tune c
root@vuuno:~#
 

 

 

"On ne voit bien qu'avec le coeur. L'essentiel est invisible pour les yeux."

Tonskidutch Superster

Tonskidutch

Geplaatst:
Geplaatst:

echt ontdekken kan ik niet iets opvallends behalve dan die FE tuning c, alsof die niet kan afstemmen...

maar waarom dat enkel gebeurd tijdens opnemen?

heeft die etisalat een kaart nodig voor decoderen?

 

ciao

I Am Gone Love You

JESTOFUNK

 

Drs. IJzerbout Superster

Drs. IJzerbout

Geplaatst:
  • Auteur
Geplaatst: (aangepast)

Nee, bij Etisalat is geen kaart nodig voor de basiskanalen. Voor paykanalen wel. Maar die heb ik niet.

CCcam heb ik ge-deactiveerd.

Als het wat koeler wordt zet ik mijn schotels weer in de tuin en dan gaat de DVB-S/S2 tuner er weer in.

 

Ik zal vandaag de VU+ weer eens naar de fabrieksinstellingen terug zetten en dan helemaal met een "schone" VTi versie zegenen.

Helpt dat niet dan laat ik het maar voor wat het is.

aangepast door Drs. IJzerbout

"On ne voit bien qu'avec le coeur. L'essentiel est invisible pour les yeux."

Tonskidutch Superster

Tonskidutch

Geplaatst:
Geplaatst:

omdat er dit tussenstond

[CI]:entering.. A NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

helemaal vers herbeginnen is natuurlijk altijd een goede methode

is de insteektuner overigens opvallend heet?

 

ciao

I Am Gone Love You

JESTOFUNK

 

Drs. IJzerbout Superster

Drs. IJzerbout

Geplaatst:
  • Auteur
Geplaatst:

Helaas zonder succes.

Het beeld schokt, stottert en blokt nog steeds, na een FPGA aktualisering.

 

Ook heb ik mijn ontvanger terug naar zijn fabrieksinstellingen gebracht en daarna VTi 7.0.x.x opnieuw geladen inklusief de laatste update van 19 sept. uit de feed.

Verder nog een swap-file van 256 MB op een externe USB stick aangemaakt.

Heeft het probleem helaas niet verholpen.

 

Ik weet het niet meer. Misschien is de DVB-C/T/T2 tuner niet helemaal cosher....alhoewel ik het me niet voor kan stellen. Het beeld is prima in orde totdat ik een opname start.

 

Ik heb mijn 2TB HD in één partitie opgedeeld. Kan het hier wat mee te maken hebben?

"On ne voit bien qu'avec le coeur. L'essentiel est invisible pour les yeux."

sattv4iedereen Superster

sattv4iedereen

Geplaatst:
Geplaatst:

Als die van een winkel komt, die tuner, zou je ermee eens kunnen gaan naar die winkel en vragen om die te testen.

Van een webshop is dit al lastiger.

Ontvangst van de astra 3 satelliet met een selfsat h50D via de vu zero 4K.cd multiroom  pakket met mz 102 en een vu uno 4k dvb-c fbc tuner met ci+ tv met een kaartje( telenet ). Gigablue bijgekomen voor sat en kabel.Informatie die ik geef, gaat over de Belgische situatie, tenzij anders vermeld|

Drs. IJzerbout Superster

Drs. IJzerbout

Geplaatst:
  • Auteur
Geplaatst:

Komt van een winkel. Maar daarvoor moet ik helemaal naar de andere kant van Dubai. Ik ga er volgende week wel langs. Nu is het donderdagavond en morgen is alles dicht.

"On ne voit bien qu'avec le coeur. L'essentiel est invisible pour les yeux."

Maak een account aan of log in om te reageren

Je moet een lid zijn om een reactie te kunnen achterlaten

Account aanmaken

Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!

Registreer een nieuwe account

Inloggen

Heb je reeds een account? Log hier in.

Nu inloggen
 Delen
Ga naar onderwerp-overzicht
×
×
  • Nieuwe aanmaken...