seca 2 kaart

[arendsoog100]

de rtl zenders worden niet meer gedecodeerd door oscam.
 sbs sd zenders werken nog wel.

[arendsoog100]

Ik heb getest met cccam 2.18 en daar werkt hij nog gewoon op.

zijn de instellingen voor een seca 2 kaart veranderd in oscam want ik heb al 2jaar gewoon kunnen kijken met die kaart.

Ik heb hem ook opnieuw moeten activeren voordat hij goed werkte.

[beeheap]

Zonder Log van het opstarten en config is het giswerk.

 

Het lijkt mij trouwens vreemd dat er sommige zender het wel en andere het niet doen.

15 januari 2015 aangepast door beeheap

[arendsoog100]

logfiles begint bij sbs 6 dan over naar rtl 7

 

• 2015/01/15 18:36:29 6D2840 c [NEW ECMPID #0] CAID: 1817 ECM_PID: 0709 PROVID: 00006A
• 2015/01/15 18:36:29 6D2840 c [NEW ECMPID #1] CAID: 0100 ECM_PID: 0641 PROVID: 00006A
• 2015/01/15 18:36:29 6D2840 c [NEW ECMPID #2] CAID: 0100 ECM_PID: 0709 PROVID: 00006A
• 2015/01/15 18:36:29 6D2840 c [ADD STREAM TO ECMPID #1] CAID: 0100 ECM_PID: 0641 PROVID: 00006A
• 2015/01/15 18:36:29 6D2840 c [ADD STREAM TO ECMPID #2] CAID: 0100 ECM_PID: 0709 PROVID: 00006A
• 2015/01/15 18:36:29 6D2840 c Found 3 ECMpids and 2 STREAMpids in PMT
• 2015/01/15 18:36:29 6D2840 c [DVBAPI] Receiver wants to demux srvid 0FA2 on adapter 0000 camask 0001 index 0000 pmtpid 0836
• 2015/01/15 18:36:29 6D2840 c New program number: 0FA2 (1817:0FA2 unknown) [pmt_list_management 3]
• 2015/01/15 18:36:29 6D2840 c [DVBAPI] Demuxer #0 trying to descramble PID #1 CAID 0100 PROVID 00006A ECMPID 0641 ANY CHID PMTPID 0836 VPID 01FE
• 2015/01/15 18:36:30 6D2840 c localuser (0100&00006A/0641/0FA2/64:2DC622ED998D273EB1BB16085449D056): found (436 ms) by upper - SBS 6 (cwc IGN)
• 2015/01/15 18:36:39 6D2840 c localuser (0100&00006A/0641/0FA2/64:EC0DC1B4136258F3427730604C77EA43): found (413 ms) by upper - SBS 6 (cwc LEARN)
• 2015/01/15 18:36:49 6D2840 c localuser (0100&00006A/0641/0FA2/64:F685215EE8E8F7DD4A49A98FDD53F632): found (415 ms) by upper - SBS 6 (cwc OK)
• 2015/01/15 18:36:59 6D2840 c localuser (0100&00006A/0641/0FA2/64:710D59392EA8D702FBEAFDD4553DDAA9): found (413 ms) by upper - SBS 6 (cwc OK)
• 2015/01/15 18:37:09 6D2840 c localuser (0100&00006A/0641/0FA2/64:45113C1984CB438A3A8EA64EAF47BD27): found (418 ms) by upper - SBS 6 (cwc OK)
• 2015/01/15 18:37:19 6D2840 c localuser (0100&00006A/0641/0FA2/64:B3CFF52B74A56875940F78D1B285C1B2): found (409 ms) by upper - SBS 6 (cwc OK)
• 2015/01/15 18:37:29 6D2840 c localuser (0100&00006A/0641/0FA2/64:7FE973F4530CBE30E200251C1FA1AF24): found (418 ms) by upper - SBS 6 (cwc OK)
• 2015/01/15 18:37:39 6D2840 c localuser (0100&00006A/0641/0FA2/64:F14D0280B954DB9793B439CD9BA7BEEA): found (413 ms) by upper - SBS 6 (cwc OK)
• 2015/01/15 18:37:49 6D2840 c localuser (0100&00006A/0641/0FA2/64:A5BE636A2B1C20B6A2727A89CA608179): found (603 ms) by upper - SBS 6 (cwc OK)
• 2015/01/15 18:38:03 6D2840 c localuser (0100&00006A/0641/0FA2/64:53DAF9FCD8DFA479FBFA1EB57B125D0B): timeout (5004 ms) by upper - SBS 6
• 2015/01/15 18:38:09 6D2840 c localuser (0100&00006A/0641/0FA2/64:53DAF9FCD8DFA479FBFA1EB57B125D0B): timeout (5000 ms) by upper - SBS 6
• 2015/01/15 18:38:09 6D2840 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
• 2015/01/15 18:38:09 6D2840 c [DVBAPI] Demuxer #0 trying to descramble PID #1 CAID 0100 PROVID 00006A ECMPID 0641 ANY CHID PMTPID 0836 VPID 01FE
• 2015/01/15 18:38:21 6D2840 c localuser (0100&00006A/0641/0FA2/64:519550EF623F3B806F84406083618FB4): found (11903 ms) by upper - SBS 6 (cwc IGN)
• 2015/01/15 18:38:21 6D2840 c localuser (0100&00006A/0641/0FA2/64:519550EF623F3B806F84406083618FB4): timeout (12845 ms) - SBS 6
• 2015/01/15 18:38:36 6D2840 c localuser (0100&00006A/0641/0FA2/64:336E7B44B6993BA2FA6D4C5A5AECB6D8): timeout (7551 ms) by upper - SBS 6
• 2015/01/15 18:38:36 6D2840 c localuser (0100&00006A/0641/0FA2/64:5C26896F7E3533C4CEFF85538748CE4C): timeout (14663 ms) - SBS 6
• 2015/01/15 18:38:36 6D2840 c localuser (0100&00006A/0641/0FA2/64:5C26896F7E3533C4CEFF85538748CE4C): timeout (17562 ms) - SBS 6 (cwc LEARN)
• 2015/01/15 18:38:36 6D2840 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
• 2015/01/15 18:38:36 6D2840 c [DVBAPI] Demuxer #0 trying to descramble PID #1 CAID 0100 PROVID 00006A ECMPID 0641 ANY CHID PMTPID 0836 VPID 01FE
• 2015/01/15 18:38:44 6D2840 c localuser (0100&00006A/0641/0FA2/64:4F604FCD7F2238C8C409269AE43529CF): found (4214 ms) by upper - SBS 6 (cwc IGN)
• 2015/01/15 18:39:02 6D2840 c localuser (0100&00006A/0641/0FA2/64:4E2E45DA50B3EC3EA5813D7FD7AE9331): timeout (13411 ms) - SBS 6
• 2015/01/15 18:39:07 6D2840 c localuser (0100&00006A/0641/0FA2/64:E7390274B6886C3EF5FAF13C906BDBB4): found (8833 ms) by upper - SBS 6 (cwc LEARN)
• 2015/01/15 18:39:07 6D2840 c localuser (0100&00006A/0641/0FA2/64:E7390274B6886C3EF5FAF13C906BDBB4): cache1 (5469 ms) by upper - SBS 6 (cwc LEARN)
• 2015/01/15 18:39:14 6D2840 c localuser (0100&00006A/0641/0FA2/64:FE7DC48E5AA1037AEA04633B6AFD6050): found (5494 ms) by upper - SBS 6 (cwc LEARN)
• 2015/01/15 18:39:20 6D2840 c localuser (0100&00006A/0641/0FA2/64:6237D87092C6537614DDD6CB25535D15): found (1542 ms) by upper - SBS 6 (cwc OK)
• 2015/01/15 18:39:29 6D2840 c localuser (0100&00006A/0641/0FA2/64:EC3138425E25B7ECB652F69E494A0ED0): found (414 ms) by upper - SBS 6 (cwc OK)
• 2015/01/15 18:39:39 6D2840 c localuser (0100&00006A/0641/0FA2/64:0203BF6F794338B60EB1900C12AAC8AB): found (410 ms) by upper - SBS 6 (cwc OK)
• 2015/01/15 18:39:43 6D2840 c [NEW ECMPID #0] CAID: 1817 ECM_PID: 0719 PROVID: 00006A
• 2015/01/15 18:39:43 6D2840 c [NEW ECMPID #1] CAID: 0100 ECM_PID: 0651 PROVID: 00006A
• 2015/01/15 18:39:43 6D2840 c [NEW ECMPID #2] CAID: 0100 ECM_PID: 0719 PROVID: 00006A
• 2015/01/15 18:39:43 6D2840 c [ADD STREAM TO ECMPID #1] CAID: 0100 ECM_PID: 0651 PROVID: 00006A
• 2015/01/15 18:39:43 6D2840 c [ADD STREAM TO ECMPID #2] CAID: 0100 ECM_PID: 0719 PROVID: 00006A
• 2015/01/15 18:39:43 6D2840 c Found 3 ECMpids and 2 STREAMpids in PMT
• 2015/01/15 18:39:43 6D2840 c [DVBAPI] Receiver wants to demux srvid 0FCF on adapter 0000 camask 0001 index 0000 pmtpid 0863
• 2015/01/15 18:39:44 6D2840 c New program number: 0FCF (1817:0FCF unknown) [pmt_list_management 3]
• 2015/01/15 18:39:44 6D2840 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/01/15 18:39:44 6D2840 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
• 2015/01/15 18:39:44 6D2840 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/01/15 18:39:44 6D2840 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
• 2015/01/15 18:39:45 6D2840 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/01/15 18:39:45 6D2840 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
• 2015/01/15 18:39:45 6D2840 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/01/15 18:39:45 6D2840 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
• 2015/01/15 18:39:46 6D2840 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/01/15 18:39:46 6D2840 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
• 2015/01/15 18:39:46 6D2840 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

[arendsoog100]

ik heb dit in dvb api staan

 

P: 0100::0FAB:0643 #NED1 SD       *
I: 0100::0FAB: #NED1 SD
P: 0100::0FAC:0644 #NED2 SD      *
I: 0100::0FAC: #NED2 SD
P: 0100::0FAD:0645 #NED3 SD      *
I: 0100::0FAD: #NED3 SD
P: 0100::07D4:0643 #RTL4 SD   *
I: 0100::07D4: #RTL4 SD
P: 0100::07D5:0644 #RTL5 SD   *
I: 0100::07D5: #RTL5 SD
P: 0100::0FA2:0641 #SBS6 SD   *
I: 0100::0FA2 #SBS6 SD
P: 0100::07EF:0647 #Veronica SD  *
I: 0100::07EF: #Veronica SD
#P: 0100::07D6:0649 #RTL7 SD   *
I: 0100::07D6: #RTL7 SD
P: 0100::0FA3:0642 #NET5 SD    *
I: 0100::0FA3: #NET5 SD

[beeheap]

2015/01/15 18:39:44 6D2840 c New program number: 0FCF (1817:0FCF unknown) [pmt_list_management 3]

 

CAID 1817 moet 0100 zijn dus ik denk dat je oscam.dvbapi en/of de config van de reader moet veranderen. Lees het volgende draadje eens door: https://www.sat4all.com/forums/topic/344091-unsubscribed-93-02/

 

Plaats de config van de reader eens.

[Gast Mimisiku]

Dat niet alleen! De ECM tijden zijn extreem hoog en vervallen in timeout. Zou ook zeker even kijken naar de reader instelling en dan met name de Mhz van de kaart. Denk dat deze niet overeenkomt met een Seca2 kaart. Haal die dvbapi eens leeg en restart OSCAM

[arendsoog100]

reader en user

 

[reader]
label                         = upper
description                   = local reader
protocol                      = internal
device                        = /dev/sci1
services                      = canaldigitaal,!tvvlaanderen
lb_whitelist_services         = canaldigitaal
autospeed                     = 0
cacheex_maxhop                = 3
detect                        = cd
group                         = 3
emmcache                      = 1,3,2
blockemm-unknown              = 1
blockemm-g                    = 1
saveemm-unknown               = 1
saveemm-u                     = 1
saveemm-s                     = 1
saveemm-g                     = 1
lb_weight                     = 500
dropbadcws                    = 1
ccchop                        = 3
auprovid                      = 00006A


[account]
user                          = localuser
description                   = lokaal
keepalive                     = 1
au                            = upper
group                         = 3

[theparasol]

 

label                         = seca2lower
protocol                      = internal
device                        = /dev/sci1
cacheex_maxhop                = 1
caid                          = 0100
detect                        = cd
mhz                           = 450
cardmhz                       = 2700
ident                         = 0100:00006A
group                         = 1
auprovid                      = 00006A

[quattro]

En dan onder account nog aanpassen:

au = seca2lower

group = 1

 

En in je oscam.dvbapi alleen:

P: 0100

 

Trouwens, doe je aan sharing? Of staat die cchops = 3 uit onwetendheid in je huidige config?

[arendsoog100]

ik heb alle bovenstaande aanpassingen in de configuratie gedaan maar dat geeft geen verschil.

ik heb wel een vu duo mischien dat dat ook nog verschil maakt bij de instelling

[beeheap]

ik heb alle bovenstaande aanpassingen in de configuratie gedaan maar dat geeft geen verschil.

ik heb wel een vu duo mischien dat dat ook nog verschil maakt bij de instelling

 

Plaats de Log en de aangepaste configs van oscam.conf, oscam.server en oscam.user want iets moet je over het hoofd gezien hebben.