Ga naar inhoud


D2500CC maar een core zichtbaar

mr|repel

Door mr|repel
in Linux & Co.

 Delen

Aanbevolen berichten

mr|repel Mentor

mr|repel

Geplaatst:
Geplaatst:

Beste allemaal,

 

Al langere tijd heb ik een D2500CC moederbord van Intel ( dual core atom board met twee gbit interfaces ). Tot heden heb ik deze gebruikt voor niet processor intensieve toepassingen. Sinds kort draai ik PFSense en loopt mijn internetverkeer over een VPN tunnel naar een OpenVPN provider. Aan zich werkt het goed, maar van mijn 100 mbit blijft maar 20 mbit over. Na wat zoeken zag ik dat de processor op 100% liep, dus de bottle neck.

 

Het valt hierbij op dat Ubuntu (14.04LTS 32bit) maar een processor ziet, met een core. Het moederbord is voorzien van een processor met 2 cores ( geen hyperthreading mogelijk ). Zie onderstaande

 

 

mrrepel@server:~$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 54
model name      : Intel(R) Atom(TM) CPU D2500   @ 1.86GHz
stepping        : 1
microcode       : 0x10d
cpu MHz         : 1866.638
cache size      : 512 KB
physical id     : 0
siblings        : 1
core id         : 0
cpu cores       : 1
apicid          : 0
initial apicid  : 0
fdiv_bug        : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat dtherm
bogomips        : 3733.27
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

 

Hoe kan ik Ubuntu wijsmaken dat er toch echt twee cores zijn en dat deze ook benut worden ?

Greetz

 

Mr|Repel

 

There are 10 kinds of people in the world

Those who understand binairy and those who don't

 

 

 


mr|repel Mentor

mr|repel

Geplaatst:
  • Auteur
Geplaatst:

Hoi Jopie,

 

Bedankt voor je bericht. Deze was ik ook al tegengekomen, echter het opnieuw opzetten van de server heeft nogal wat pootjes in aarde.

Greetz

 

Mr|Repel

 

There are 10 kinds of people in the world

Those who understand binairy and those who don't

 

 

 

jopiesat Rijzende ster

jopiesat

Geplaatst:
Geplaatst:

Altijd lastig als je met je firewall zit te klooien, je hebt meestal geen 'tijdelijke spare'.

BIOS update wil dit soort dingen ook wel eens verhelpen, maar denk dat jij al de laatste hebt als je weet hoe je PFsense moet configuren.

 

Geen idee of het kan, maar je zou er ook VMWare ESXi op kunnen zetten, met twee PFSense VM's (eentje actief, andere backup bij onderhoud).

Hoe je niet zo moeilijk te doen bij het opnieuw opzetten van de server, kwestie van nieuwe VM aanmaken.

  • Moderator
wiz Superster

wiz

Geplaatst:
  • Moderator
Geplaatst:

op een atom boardje? Je hebt nu al last van te weinig cpu power, ik denk niet dat het gaat helpen om er eerst nog een hypervisor tussen te zetten.

VU+ Duo4kSe  met VTi    VU+ duo2 met VTi 

Triax 78, astra 1,2,3, HB

jopiesat Rijzende ster

jopiesat

Geplaatst:
Geplaatst:

64 bit pfsense direct zal altijd sneller zijn dan gevirtualiseerd. Maar dan moeten wel allebei de cores het doen :-)

Overhead van een hyperviser valt reuze mee. Je krijgt er beheer-gemak voor terug.

mr|repel Mentor

mr|repel

Geplaatst:
  • Auteur
Geplaatst:

Ik draai PFSense in een "gewone" virtual machine ( VMWare Workstation 10.0.3 ) binnen Ubuntu, buiten PFSense draait nog OSCAM, TVHeadend, file sharing / printer sharing (zonder VM). Bij "normaal" gebruik, dus zonder te downloaden zit ik op een 20-25% load op de processor. Enkel de encryptie van OpenVPN belast de processor tot 100%. Omdat Ubuntu maar een processor ziet ( een core dan ) kan de VM ook niet van meer gebruik maken, het probleem ligt echt in Ubuntu.

Greetz

 

Mr|Repel

 

There are 10 kinds of people in the world

Those who understand binairy and those who don't

 

 

 

mr|repel Mentor

mr|repel

Geplaatst:
  • Auteur
Geplaatst:

 

mrrepel@server:~$ uname -a
Linux server 3.13.0-30-generic #55-Ubuntu SMP Fri Jul 4 21:43:42 UTC 2014 i686 i686 i686 GNU/Linux
mrrepel@server:~$

Greetz

 

Mr|Repel

 

There are 10 kinds of people in the world

Those who understand binairy and those who don't

 

 

 

RS2000 Rijzende ster

RS2000

Geplaatst:
Geplaatst:

Zou de goede moeten zijn, SMP geeft aan dat hij voor meerdere cpu's/cores geschikt is.

Wat geeft: cat /proc/cmdline

 

En je zou ook in de /var/log eens in de logfiles kunnen kijken, iets van dmesg.log of boot.log, misschien valt daar uit te halen waarom er maar 1 core gebruikt wordt.

jopiesat Rijzende ster

jopiesat

Geplaatst:
Geplaatst:

Nou

 

op een atom boardje? Je hebt nu al last van te weinig cpu power, ik denk niet dat het gaat helpen om er eerst nog een hypervisor tussen te zetten.

@Wiz, mr|repel gebruikt nu ubuntu als 'hypervisor', die heeft veel meer overhead dan de ESXi hypervisor... dus de suggestie was nog niet zo vreemd.

jopiesat Rijzende ster

jopiesat

Geplaatst:
Geplaatst:

Ik draai PFSense in een "gewone" virtual machine ( VMWare Workstation 10.0.3 ) binnen Ubuntu, buiten PFSense draait nog OSCAM, TVHeadend, file sharing / printer sharing (zonder VM). Bij "normaal" gebruik, dus zonder te downloaden zit ik op een 20-25% load op de processor. Enkel de encryptie van OpenVPN belast de processor tot 100%. Omdat Ubuntu maar een processor ziet ( een core dan ) kan de VM ook niet van meer gebruik maken, het probleem ligt echt in Ubuntu.

Heb geen ervaring met VMWare workstation, wel ESXi. Heb je de VMWare tools geïnstalleerd, en gebruik je de vmxnet3 drivers voor de virtuele netwerk-kaarten? Kan nog iets schelen qua performance. Zie ook https://calvin.me/part-4-install-pfsense-esxi-5-5/

 

Scheelt een her-installatie van Ubuntu 64 bit, Vmware workstation met PFSense, Oscam, TVHeadend, filesharing... pfff ik begrijp je bezwaar tegen een herinstallatie...

BIOS is dus wel actueel? Kan zijn dat een BIOS update verhelpt dat de Ubuntu 32 bit met opstarten maar één core ziet.

mr|repel Mentor

mr|repel

Geplaatst:
  • Auteur
Geplaatst:

De performance ligt niet aan de netwerkkaarten of de software hiervan. Zonder OpenVPN zit ik aan een load van 80% bij maximale throughput ( 100 mbit up / 100 mbit down ). Als bijlage een overzicht van de gemiddelde load op de processor:

 

load.png

 

VMWare tools zijn geinstalleerd, alsmede een "actuele" bios. Zoals aangegeven, het zaakje werkt wel, alleen ik mis de performance bij OpenVPN mbt rekenkracht en maximaal downloaden, hetgeen sporadisch voorkomt. Daarom wil ik de tweede core kunnen aanspreken om hier in mee te werken.

Greetz

 

Mr|Repel

 

There are 10 kinds of people in the world

Those who understand binairy and those who don't

 

 

 

mr|repel Mentor

mr|repel

Geplaatst:
  • Auteur
Geplaatst:

En nog een dumpje van dmesg

 

 

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-30-generic (buildd@komainu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #55-Ubuntu SMP Fri Jul 4 21:43:42 UTC 2014 (Ubuntu 3.13.0-30.55-generic 3.13.11.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cee97fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cee98000-0x00000000ceebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ceebf000-0x00000000cef08fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cef09000-0x00000000cefbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cefbf000-0x00000000ceff0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ceff1000-0x00000000ceffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cefff000-0x00000000ceffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI:                  /D2500CC, BIOS CCCDT10N.86A.0037.2012.1217.1723 12/17/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF0000000 write-back
[    0.000000]   3 base 0CF000000 mask FFF000000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000fbe30-0x000fbe3f] mapped at [c00fbe30]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01b8c000, 0x01b8cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c3c000-0x36e15fff]
[    0.000000] 3972MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] BRK [0x01b8d000, 0x01b8dfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x2fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0008efff]
[    0.000000]   node   0: [mem 0x00090000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xcee97fff]
[    0.000000]   node   0: [mem 0xceebf000-0xcef08fff]
[    0.000000]   node   0: [mem 0xcefbf000-0xceff0fff]
[    0.000000]   node   0: [mem 0xcefff000-0xceffffff]
[    0.000000]   node   0: [mem 0x00000000-0x2fffffff]
[    0.000000] On node 0 totalpages: 1044144
[    0.000000] free_area_init_node: node 0, pgdat c1995100, node_mem_map f363c020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 7945 pages used for memmap
[    0.000000]   HighMem zone: 815895 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] MPTABLE: OEM ID:
[    0.000000] MPTABLE: Product ID:
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)
[    0.000000] Processors: 1
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0xe4000000-0xffdfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7bde000 s36096 r0 d21248 u57344
[    0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1042360
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-30-generic root=UUID=9435b470-7e09-4234-8d69-340d739915fa ro video=LVDS-1:d video=DVI-D-1:d video=DVI-D-2:d acpi=off nomodeset quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 9961464 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:00130000)
[    0.000000] Memory: 4096820K/4176576K available (6522K kernel code, 639K rwdata, 2756K rodata, 872K init, 924K bss, 79756K reserved, 3263580K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc19b2000 - 0xc1a8c000   ( 872 kB)
[    0.000000]       .data : 0xc165ef32 - 0xc19b1d80   (3403 kB)
[    0.000000]       .text : 0xc1000000 - 0xc165ef32   (6523 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f3008000 soft=f300a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration failed
[    0.016000] tsc: Using PIT calibration value
[    0.016000] tsc: Detected 1866.638 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.27 BogoMIPS (lpj=7466552)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000071] Security Framework initialized
[    0.000096] AppArmor: AppArmor initialized
[    0.000100] Yama: becoming mindful.
[    0.000202] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000208] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000633] Initializing cgroup subsys memory
[    0.000651] Initializing cgroup subsys devices
[    0.000657] Initializing cgroup subsys freezer
[    0.000661] Initializing cgroup subsys blkio
[    0.000665] Initializing cgroup subsys perf_event
[    0.000672] Initializing cgroup subsys hugetlb
[    0.000715] Disabled fast string operations
[    0.000723] CPU: Physical Processor ID: 0
[    0.000726] CPU: Processor Core ID: 0
[    0.000731] mce: CPU supports 5 MCE banks
[    0.000745] CPU0: Thermal monitoring enabled (TM1)
[    0.000765] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.000765] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[    0.000765] tlb_flushall_shift: 6
[    0.011308] Freeing SMP alternatives memory: 32K (c1a8c000 - c1a94000)
[    0.012984] ftrace: allocating 27751 entries in 55 pages
[    0.034845] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.034857] smpboot: CPU0: Intel(R) Atom(TM) CPU D2500   @ 1.86GHz (fam: 06, model: 36, stepping: 01)
[    0.251448] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[    0.251463] ... version:                3
[    0.251467] ... bit width:              40
[    0.251470] ... generic registers:      2
[    0.251473] ... value mask:             000000ffffffffff
[    0.251477] ... max period:             000000007fffffff
[    0.251480] ... fixed-purpose events:   3
[    0.251483] ... event mask:             0000000700000003
[    0.255245] x86: Booted up 1 node, 1 CPUs
[    0.255252] smpboot: Total of 1 processors activated (3733.27 BogoMIPS)
[    0.255576] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.255804] devtmpfs: initialized
[    0.256304] EVM: security.selinux
[    0.256309] EVM: security.SMACK64
[    0.256312] EVM: security.ima
[    0.256315] EVM: security.capability
[    0.256557] PM: Registering ACPI NVS region [mem 0xcef09000-0xcefbefff] (745472 bytes)
[    0.259127] pinctrl core: initialized pinctrl subsystem
[    0.259300] regulator-dummy: no parameters
[    0.259355] RTC time: 15:43:26, date: 01/29/15
[    0.259443] NET: Registered protocol family 16
[    0.259872] EISA bus registered
[    0.259878] cpuidle: using governor ladder
[    0.259881] cpuidle: using governor menu
[    0.261479] PCI: Using configuration type 1 for base access
[    0.264582] bio: create slab <bio-0> at 0
[    0.264945] ACPI: Interpreter disabled.
[    0.265136] vgaarb: loaded
[    0.265656] SCSI subsystem initialized
[    0.265752] libata version 3.00 loaded.
[    0.265899] usbcore: registered new interface driver usbfs
[    0.265925] usbcore: registered new interface driver hub
[    0.265981] usbcore: registered new device driver usb
[    0.266261] PCI: Probing PCI hardware
[    0.266267] PCI: root bus 00: using default resources
[    0.266271] PCI: Probing PCI hardware (bus 00)
[    0.266331] PCI host bridge to bus 0000:00
[    0.266340] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.266347] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.266352] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.266372] pci 0000:00:00.0: [8086:0bf5] type 00 class 0x060000
[    0.266489] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[    0.266508] pci 0000:00:02.0: reg 0x10: [mem 0xd4300000-0xd43fffff]
[    0.266518] pci 0000:00:02.0: reg 0x14: [io  0x30d0-0x30d7]
[    0.266611] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.266675] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.266769] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.266867] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.266959] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.267058] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.267151] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.267247] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.267310] pci 0000:00:1d.0: reg 0x20: [io  0x30a0-0x30bf]
[    0.267412] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.267478] pci 0000:00:1d.1: reg 0x20: [io  0x3080-0x309f]
[    0.267582] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.267647] pci 0000:00:1d.2: reg 0x20: [io  0x3060-0x307f]
[    0.267755] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.267820] pci 0000:00:1d.3: reg 0x20: [io  0x3040-0x305f]
[    0.267935] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.267963] pci 0000:00:1d.7: reg 0x10: [mem 0xd4400400-0xd44007ff]
[    0.268071] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.268168] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.268311] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.268408] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[    0.268522] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.268546] pci 0000:00:1f.2: reg 0x10: [io  0x30c8-0x30cf]
[    0.268560] pci 0000:00:1f.2: reg 0x14: [io  0x30dc-0x30df]
[    0.268573] pci 0000:00:1f.2: reg 0x18: [io  0x30c0-0x30c7]
[    0.268587] pci 0000:00:1f.2: reg 0x1c: [io  0x30d8-0x30db]
[    0.268600] pci 0000:00:1f.2: reg 0x20: [io  0x3020-0x302f]
[    0.268614] pci 0000:00:1f.2: reg 0x24: [mem 0xd4400000-0xd44003ff]
[    0.268667] pci 0000:00:1f.2: PME# supported from D3hot
[    0.268784] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.268848] pci 0000:00:1f.3: reg 0x20: [io  0x3000-0x301f]
[    0.269071] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000
[    0.269101] pci 0000:02:00.0: reg 0x10: [mem 0xd4220000-0xd423ffff]
[    0.269124] pci 0000:02:00.0: reg 0x14: [mem 0xd4200000-0xd421ffff]
[    0.269146] pci 0000:02:00.0: reg 0x18: [io  0x2000-0x201f]
[    0.269169] pci 0000:02:00.0: reg 0x1c: [mem 0xd4240000-0xd4243fff]
[    0.269328] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.276795] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.276804] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.276811] pci 0000:00:1c.0:   bridge window [mem 0xd4200000-0xd42fffff]
[    0.276938] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000
[    0.276969] pci 0000:01:00.0: reg 0x10: [mem 0xd4120000-0xd413ffff]
[    0.276991] pci 0000:01:00.0: reg 0x14: [mem 0xd4100000-0xd411ffff]
[    0.277014] pci 0000:01:00.0: reg 0x18: [io  0x1000-0x101f]
[    0.277037] pci 0000:01:00.0: reg 0x1c: [mem 0xd4140000-0xd4143fff]
[    0.277195] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.284799] pci 0000:00:1c.1: PCI bridge to [bus 01]
[    0.284808] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.284816] pci 0000:00:1c.1:   bridge window [mem 0xd4100000-0xd41fffff]
[    0.284937] pci 0000:03:00.0: [18c3:0720] type 00 class 0x040000
[    0.284963] pci 0000:03:00.0: reg 0x10: [mem 0xd4010000-0xd401ffff]
[    0.284992] pci 0000:03:00.0: reg 0x14: [mem 0xd4000000-0xd400ffff 64bit]
[    0.285204] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.285221] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.285231] pci 0000:00:1c.2:   bridge window [mem 0xd4000000-0xd40fffff]
[    0.285321] pci 0000:04:00.0: [9005:0285] type 00 class 0x010400
[    0.285355] pci 0000:04:00.0: reg 0x10: [mem 0xd0000000-0xd3ffffff pref]
[    0.285444] pci 0000:04:00.0: reg 0x30: [mem 0xffff8000-0xffffffff pref]
[    0.285606] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.285622] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[    0.285628] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.285633] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.285662] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04
[    0.286007] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:27bc]
[    0.286025] PCI: setting IRQ 11 as level-triggered
[    0.286031] pci 0000:00:1c.0: found PCI INT A -> IRQ 11
[    0.286039] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:02.0
[    0.286060] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1d.3
[    0.286092] PCI: setting IRQ 9 as level-triggered
[    0.286098] pci 0000:00:1c.1: found PCI INT B -> IRQ 9
[    0.286148] PCI: setting IRQ 10 as level-triggered
[    0.286154] pci 0000:00:1c.2: found PCI INT C -> IRQ 10
[    0.286174] pci 0000:00:1c.2: sharing IRQ 10 with 0000:00:1d.2
[    0.286202] pci 0000:00:1c.2: sharing IRQ 10 with 0000:03:00.0
[    0.286234] PCI: pci_cache_line_size set to 64 bytes
[    0.286312] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.286317] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.286322] e820: reserve RAM buffer [mem 0xcee98000-0xcfffffff]
[    0.286327] e820: reserve RAM buffer [mem 0xcef09000-0xcfffffff]
[    0.286331] e820: reserve RAM buffer [mem 0xceff1000-0xcfffffff]
[    0.286335] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
[    0.286552] NetLabel: Initializing
[    0.286556] NetLabel:  domain hash size = 128
[    0.286559] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.286586] NetLabel:  unlabeled traffic allowed by default
[    0.286915] Switched to clocksource refined-jiffies
[    0.300441] AppArmor: AppArmor Filesystem Enabled
[    0.300486] pnp: PnP ACPI: disabled
[    0.300493] PnPBIOS: Scanning system for PnP BIOS support...
[    0.300547] PnPBIOS: Found PnP BIOS installation structure at 0xc00f23e0
[    0.300555] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x2492, dseg 0xf0000
[    0.300565] PNPBIOS fault.. attempting recovery.
[    0.300568] PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
[    0.300571] PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably
[    0.300574] PnPBIOS: Check with your vendor for an updated BIOS
[    0.300577] PnPBIOS: dev_node_info: unexpected status 0x24
[    0.300580] PnPBIOS: Unable to get node info.  Aborting.
[    0.304814] pci 0000:04:00.0: address space collision: [mem 0xffff8000-0xffffffff pref] conflicts with reserved [mem 0xffe00000-0xffffffff]
[    0.304845] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.304861] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.304876] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.304883] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.304908] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.304914] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.304921] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.304927] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.304939] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe4000000-0xe41fffff 64bit pref]
[    0.304948] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe4200000-0xe43fffff 64bit pref]
[    0.304956] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe4400000-0xe45fffff 64bit pref]
[    0.304965] pci 0000:00:1e.0: BAR 14: assigned [mem 0xe4600000-0xe46fffff]
[    0.304973] pci 0000:00:1c.2: BAR 13: assigned [io  0x4000-0x4fff]
[    0.304979] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.304987] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.304996] pci 0000:00:1c.0:   bridge window [mem 0xd4200000-0xd42fffff]
[    0.305004] pci 0000:00:1c.0:   bridge window [mem 0xe4000000-0xe41fffff 64bit pref]
[    0.305014] pci 0000:00:1c.1: PCI bridge to [bus 01]
[    0.305020] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.305029] pci 0000:00:1c.1:   bridge window [mem 0xd4100000-0xd41fffff]
[    0.305037] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe43fffff 64bit pref]
[    0.305046] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.305053] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.305061] pci 0000:00:1c.2:   bridge window [mem 0xd4000000-0xd40fffff]
[    0.305069] pci 0000:00:1c.2:   bridge window [mem 0xe4400000-0xe45fffff 64bit pref]
[    0.305081] pci 0000:04:00.0: BAR 6: assigned [mem 0xe4600000-0xe4607fff pref]
[    0.305087] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.305096] pci 0000:00:1e.0:   bridge window [mem 0xe4600000-0xe46fffff]
[    0.305104] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[    0.305115] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.305120] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.305126] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.305132] pci_bus 0000:02: resource 1 [mem 0xd4200000-0xd42fffff]
[    0.305137] pci_bus 0000:02: resource 2 [mem 0xe4000000-0xe41fffff 64bit pref]
[    0.305143] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.305148] pci_bus 0000:01: resource 1 [mem 0xd4100000-0xd41fffff]
[    0.305154] pci_bus 0000:01: resource 2 [mem 0xe4200000-0xe43fffff 64bit pref]
[    0.305159] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    0.305165] pci_bus 0000:03: resource 1 [mem 0xd4000000-0xd40fffff]
[    0.305170] pci_bus 0000:03: resource 2 [mem 0xe4400000-0xe45fffff 64bit pref]
[    0.305176] pci_bus 0000:04: resource 1 [mem 0xe4600000-0xe46fffff]
[    0.305182] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
[    0.305188] pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
[    0.305193] pci_bus 0000:04: resource 5 [mem 0x00000000-0xfffffffff]
[    0.305260] NET: Registered protocol family 2
[    0.305594] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.305636] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.305687] TCP: Hash tables configured (established 8192 bind 8192)
[    0.305726] TCP: reno registered
[    0.305733] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.305748] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.305870] NET: Registered protocol family 1
[    0.305902] pci 0000:00:02.0: Boot video device
[    0.305933] pci 0000:00:1d.0: found PCI INT A -> IRQ 11
[    0.305959] pci 0000:00:1d.0: sharing IRQ 11 with 0000:00:1d.7
[    0.306024] pci 0000:00:1d.1: found PCI INT B -> IRQ 9
[    0.306054] pci 0000:00:1d.1: sharing IRQ 9 with 0000:00:1f.2
[    0.306062] pci 0000:00:1d.1: sharing IRQ 9 with 0000:00:1f.3
[    0.306113] pci 0000:00:1d.2: found PCI INT C -> IRQ 10
[    0.306127] pci 0000:00:1d.2: sharing IRQ 10 with 0000:00:1c.2
[    0.306163] pci 0000:00:1d.2: sharing IRQ 10 with 0000:03:00.0
[    0.306203] pci 0000:00:1d.3: found PCI INT D -> IRQ 11
[    0.306210] pci 0000:00:1d.3: sharing IRQ 11 with 0000:00:02.0
[    0.306218] pci 0000:00:1d.3: sharing IRQ 11 with 0000:00:1c.0
[    0.306293] pci 0000:00:1d.7: found PCI INT A -> IRQ 11
[    0.306309] pci 0000:00:1d.7: sharing IRQ 11 with 0000:00:1d.0
[    0.320862] PCI: CLS 64 bytes, default 64
[    0.320973] Trying to unpack rootfs image as initramfs...
[    1.016263] Freeing initrd memory: 18280K (f5c3c000 - f6e16000)
[    1.016580] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.016713] microcode: CPU0 sig=0x30661, pf=0x4, revision=0x10d
[    1.016813] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.016818] Scanning for low memory corruption every 60 seconds
[    1.017289] Initialise system trusted keyring
[    1.017380] audit: initializing netlink socket (disabled)
[    1.017442] type=2000 audit(1422546206.920:1): initialized
[    1.065765] bounce pool size: 64 pages
[    1.065789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.069066] zbud: loaded
[    1.069220] VFS: Disk quotas dquot_6.5.2
[    1.069325] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.070435] fuse init (API version 7.22)
[    1.070617] msgmni has been set to 1663
[    1.070745] Key type big_key registered
[    1.071366] Key type asymmetric registered
[    1.071371] Asymmetric key parser 'x509' registered
[    1.071455] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.071518] io scheduler noop registered
[    1.071523] io scheduler deadline registered (default)
[    1.071591] io scheduler cfq registered
[    1.071806] pcieport 0000:00:1c.0: found PCI INT A -> IRQ 11
[    1.071815] pcieport 0000:00:1c.0: sharing IRQ 11 with 0000:00:02.0
[    1.071836] pcieport 0000:00:1c.0: sharing IRQ 11 with 0000:00:1d.3
[    1.071911] pcieport 0000:00:1c.0: irq 16 for MSI/MSI-X
[    1.072052] pcieport 0000:00:1c.1: found PCI INT B -> IRQ 9
[    1.072134] pcieport 0000:00:1c.1: irq 17 for MSI/MSI-X
[    1.072274] pcieport 0000:00:1c.2: found PCI INT C -> IRQ 10
[    1.072296] pcieport 0000:00:1c.2: sharing IRQ 10 with 0000:00:1d.2
[    1.072325] pcieport 0000:00:1c.2: sharing IRQ 10 with 0000:03:00.0
[    1.072365] pcieport 0000:00:1c.2: irq 18 for MSI/MSI-X
[    1.072559] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.072565] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.072573] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.072618] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    1.072624] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.072632] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    1.072673] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    1.072678] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.072686] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    1.072723] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.072804] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 202c
[    1.072871] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    1.072894] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 8086 ss_did 202c
[    1.072950] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[    1.072973] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 27d4 ss_vid 8086 ss_did 202c
[    1.073025] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[    1.073041] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.073143] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    1.073147] vesafb: scrolling: redraw
[    1.073152] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.074722] vesafb: framebuffer at 0xcf800000, mapped to 0xf8400000, using 5120k, total 5120k
[    1.130669] Console: switching to colour frame buffer device 160x64
[    1.186422] fb0: VESA VGA frame buffer device
[    1.186496] intel_idle: does not run on family 6 model 54
[    1.186514] ipmi message handler version 39.2
[    1.186799] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.189029] isapnp: Scanning for PnP cards...
[    1.195368] Linux agpgart interface v0.103
[    1.242348] brd: module loaded
[    1.244118] loop: module loaded
[    1.245266] libphy: Fixed MDIO Bus: probed
[    1.245563] tun: Universal TUN/TAP device driver, 1.6
[    1.245567] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.289274] PPP generic driver version 2.4.2
[    1.289375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.289386] ehci-pci: EHCI PCI platform driver
[    1.289431] ehci-pci 0000:00:1d.7: found PCI INT A -> IRQ 11
[    1.289450] ehci-pci 0000:00:1d.7: sharing IRQ 11 with 0000:00:1d.0
[    1.289527] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.289539] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.289562] ehci-pci 0000:00:1d.7: debug port 1
[    1.293484] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.293507] ehci-pci 0000:00:1d.7: irq 11, io mem 0xd4400400
[    1.337074] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.380797] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.380803] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.380809] usb usb1: Product: EHCI Host Controller
[    1.380813] usb usb1: Manufacturer: Linux 3.13.0-30-generic ehci_hcd
[    1.380818] usb usb1: SerialNumber: 0000:00:1d.7
[    1.381046] hub 1-0:1.0: USB hub found
[    1.381066] hub 1-0:1.0: 8 ports detected
[    1.381449] ehci-platform: EHCI generic platform driver
[    1.381476] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.381479] ohci-pci: OHCI PCI platform driver
[    1.381506] ohci-platform: OHCI generic platform driver
[    1.381525] uhci_hcd: USB Universal Host Controller Interface driver
[    1.381572] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
[    1.381598] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:00:1d.7
[    1.381644] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.381656] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.381695] uhci_hcd 0000:00:1d.0: irq 11, io base 0x000030a0
[    1.381842] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.381849] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.381854] usb usb2: Product: UHCI Host Controller
[    1.381859] usb usb2: Manufacturer: Linux 3.13.0-30-generic uhci_hcd
[    1.381863] usb usb2: SerialNumber: 0000:00:1d.0
[    1.382081] hub 2-0:1.0: USB hub found
[    1.382100] hub 2-0:1.0: 2 ports detected
[    1.382300] uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 9
[    1.382333] uhci_hcd 0000:00:1d.1: sharing IRQ 9 with 0000:00:1f.2
[    1.382341] uhci_hcd 0000:00:1d.1: sharing IRQ 9 with 0000:00:1f.3
[    1.382374] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.382385] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.382424] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00003080
[    1.382540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.382546] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.382551] usb usb3: Product: UHCI Host Controller
[    1.382556] usb usb3: Manufacturer: Linux 3.13.0-30-generic uhci_hcd
[    1.382561] usb usb3: SerialNumber: 0000:00:1d.1
[    1.382763] hub 3-0:1.0: USB hub found
[    1.382782] hub 3-0:1.0: 2 ports detected
[    1.382970] uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 10
[    1.383015] uhci_hcd 0000:00:1d.2: sharing IRQ 10 with 0000:03:00.0
[    1.383038] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.383048] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.383085] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003060
[    1.383204] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.383210] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.383215] usb usb4: Product: UHCI Host Controller
[    1.383220] usb usb4: Manufacturer: Linux 3.13.0-30-generic uhci_hcd
[    1.383225] usb usb4: SerialNumber: 0000:00:1d.2
[    1.383446] hub 4-0:1.0: USB hub found
[    1.383466] hub 4-0:1.0: 2 ports detected
[    1.383642] uhci_hcd 0000:00:1d.3: found PCI INT D -> IRQ 11
[    1.383651] uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:00:02.0
[    1.383710] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.383720] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.383756] uhci_hcd 0000:00:1d.3: irq 11, io base 0x00003040
[    1.383875] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.383881] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.383886] usb usb5: Product: UHCI Host Controller
[    1.383891] usb usb5: Manufacturer: Linux 3.13.0-30-generic uhci_hcd
[    1.383896] usb usb5: SerialNumber: 0000:00:1d.3
[    1.384096] hub 5-0:1.0: USB hub found
[    1.384115] hub 5-0:1.0: 2 ports detected
[    1.384415] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.474244] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.474258] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.474510] mousedev: PS/2 mouse device common for all mice
[    1.474827] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.474858] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    1.475004] device-mapper: uevent: version 1.0.3
[    1.475135] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.475182] platform eisa.0: Probing EISA bus 0
[    1.475195] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.475201] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.475207] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.475214] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.475240] platform eisa.0: EISA: Detected 0 cards
[    1.475252] cpufreq-nforce2: No nForce2 chipset.
[    1.475258] ledtrig-cpu: registered to indicate activity on CPUs
[    1.475539] TCP: cubic registered
[    1.475764] NET: Registered protocol family 10
[    1.476141] NET: Registered protocol family 17
[    1.476173] Key type dns_resolver registered
[    1.519969] isapnp: No Plug & Play device found
[    1.520268] Using IPI No-Shortcut mode
[    1.520480] Loading compiled-in X.509 certificates
[    1.529757] Loaded X.509 cert 'Magrathea: Glacier signing key: 6c4cccd23ec578fee9b9e0c7e2670c91f2e0a0ac'
[    1.529784] registered taskstats version 1
[    1.535131] Key type trusted registered
[    1.539943] Key type encrypted registered
[    1.545294] AppArmor: AppArmor sha1 policy hashing enabled
[    1.545302] IMA: No TPM chip found, activating TPM-bypass!
[    1.545702] regulator-dummy: incomplete constraints, leaving on
[    1.545809]   Magic number: 15:423:741
[    1.545933] workqueue writeback: hash matches
[    1.545975] rtc_cmos rtc_cmos: setting system clock to 2015-01-29 15:43:27 UTC (1422546207)
[    1.546072] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.546075] EDD information not available.
[    1.546176] PM: Hibernation image not present or could not be loaded.
[    1.546839] Freeing unused kernel memory: 872K (c19b2000 - c1a8c000)
[    1.546918] Write protecting the kernel text: 6524k
[    1.547050] Write protecting the kernel read-only data: 2764k
[    1.547053] NX-protecting the kernel data: 5764k
[    1.562052] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.578220] systemd-udevd[91]: starting version 204
[    1.665497] pps_core: LinuxPPS API ver. 1 registered
[    1.665503] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.735034] PTP clock support registered
[    1.813930] Adaptec aacraid driver 1.2-0[30200]-ms
[    1.814009] aacraid 0000:04:00.0: found PCI INT A -> IRQ 10
[    1.820850] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.820855] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.820927] e1000e 0000:02:00.0: found PCI INT A -> IRQ 9
[    1.821140] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.821191] e1000e 0000:02:00.0: irq 19 for MSI/MSI-X
[    1.821208] e1000e 0000:02:00.0: irq 20 for MSI/MSI-X
[    1.821224] e1000e 0000:02:00.0: irq 21 for MSI/MSI-X
[    1.846880] ahci 0000:00:1f.2: version 3.0
[    1.846903] ahci 0000:00:1f.2: found PCI INT B -> IRQ 9
[    1.846924] ahci 0000:00:1f.2: sharing IRQ 9 with 0000:00:1d.1
[    1.846945] ahci 0000:00:1f.2: sharing IRQ 9 with 0000:00:1f.3
[    1.847028] ahci 0000:00:1f.2: irq 22 for MSI/MSI-X
[    1.847089] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.847128] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.847136] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[    1.872598] scsi1 : ahci
[    1.873031] AAC0: kernel 4.2-1[7368] Mar 30 2005
[    1.873038] AAC0: monitor 4.2-1[7368]
[    1.873042] AAC0: bios 4.2-1[7368]
[    1.873047] AAC0: serial BE5B6A
[    1.874348] scsi0 : aacraid
[    1.874865] scsi 0:0:0:0: Direct-Access     Adaptec  2610SA Legacy    V1.0 PQ: 0 ANSI: 2
[    1.875411] scsi 0:0:1:0: Direct-Access     Adaptec  raid             V1.0 PQ: 0 ANSI: 2
[    1.875903] scsi 0:0:2:0: Direct-Access     Adaptec  2610SA Legacy    V1.0 PQ: 0 ANSI: 2
[    1.876523] scsi2 : ahci
[    1.882455] scsi3 : ahci
[    1.887667] scsi 0:1:0:0: Direct-Access     SAMSUNG  SP2504C          VT10 PQ: 0 ANSI: 2
[    1.887879] scsi4 : ahci
[    1.888029] ata1: SATA max UDMA/133 abar m1024@0xd4400000 port 0xd4400100 irq 22
[    1.888036] ata2: SATA max UDMA/133 abar m1024@0xd4400000 port 0xd4400180 irq 22
[    1.888040] ata3: DUMMY
[    1.888043] ata4: DUMMY
[    1.889405] scsi 0:1:1:0: Direct-Access     SAMSUNG  SP2504C          VT10 PQ: 0 ANSI: 2
[    1.892024] scsi 0:1:3:0: Direct-Access     ST316031 8AS              CC37 PQ: 0 ANSI: 2
[    1.893695] scsi 0:1:4:0: Direct-Access     Hitachi  HDS721010KLA330  GKAO PQ: 0 ANSI: 2
[    1.927925] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.927973] sd 0:0:0:0: [sda] Write Protect is off
[    1.927981] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
[    1.928063] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    1.929696] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.930087] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.934356] sd 0:0:2:0: Attached scsi generic sg2 type 0
[    1.934671] scsi 0:1:0:0: Attached scsi generic sg3 type 0
[    1.934953] scsi 0:1:1:0: Attached scsi generic sg4 type 0
[    1.935371] sd 0:0:1:0: [sdb] 488386560 512-byte logical blocks: (250 GB/232 GiB)
[    1.935418] sd 0:0:1:0: [sdb] Write Protect is off
[    1.935426] sd 0:0:1:0: [sdb] Mode Sense: 06 00 10 00
[    1.935508] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    1.936117] scsi 0:1:3:0: Attached scsi generic sg5 type 0
[    1.936444] scsi 0:1:4:0: Attached scsi generic sg6 type 0
[    1.936665] sd 0:0:2:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.936707] sd 0:0:2:0: [sdc] Write Protect is off
[    1.936715] sd 0:0:2:0: [sdc] Mode Sense: 06 00 10 00
[    1.936790] sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    1.938512]  sdb: sdb1
[    1.939039]  sdc: sdc1
[    1.939584] sd 0:0:1:0: [sdb] Attached SCSI removable disk
[    1.939778] sd 0:0:2:0: [sdc] Attached SCSI removable disk
[    1.966730]  sda: sda1 sda2 < sda5 >
[    1.967453] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    1.975408] e1000e 0000:02:00.0 eth0: registered PHC clock
[    1.975417] e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:ad:30:2e
[    1.975423] e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.975441] e1000e 0000:02:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[    1.975505] e1000e 0000:01:00.0: found PCI INT A -> IRQ 11
[    1.975515] e1000e 0000:01:00.0: sharing IRQ 11 with 0000:00:02.0
[    1.975536] e1000e 0000:01:00.0: sharing IRQ 11 with 0000:00:1d.3
[    1.975734] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.975780] e1000e 0000:01:00.0: irq 23 for MSI/MSI-X
[    1.975797] e1000e 0000:01:00.0: irq 24 for MSI/MSI-X
[    1.975812] e1000e 0000:01:00.0: irq 25 for MSI/MSI-X
[    2.014344] Switched to clocksource tsc
[    2.082352] usb 1-6: new high-speed USB device number 4 using ehci-pci
[    2.114419] e1000e 0000:01:00.0 eth1: registered PHC clock
[    2.114428] e1000e 0000:01:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:22:4d:ad:30:32
[    2.114434] e1000e 0000:01:00.0 eth1: Intel(R) PRO/1000 Network Connection
[    2.114452] e1000e 0000:01:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[    2.206459] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.210525] ata1.00: ATA-8: WDC WD15EADS-11P8B1, 80.00A80, max UDMA/133
[    2.210532] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.214531] ata1.00: configured for UDMA/133
[    2.214766] scsi 1:0:0:0: Direct-Access     ATA      WDC WD15EADS-11P 80.0 PQ: 0 ANSI: 5
[    2.215170] sd 1:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    2.215176] sd 1:0:0:0: [sdd] 4096-byte physical blocks
[    2.215318] sd 1:0:0:0: [sdd] Write Protect is off
[    2.215325] sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.215389] sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.215800] sd 1:0:0:0: Attached scsi generic sg7 type 0
[    2.222582]  sdd: sdd1
[    2.223149] sd 1:0:0:0: [sdd] Attached SCSI disk
[    2.241217] usb 1-6: New USB device found, idVendor=148f, idProduct=3070
[    2.241224] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.241229] usb 1-6: Product: 802.11 n WLAN
[    2.241234] usb 1-6: Manufacturer: Ralink
[    2.490699] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.534736] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.535055] ata2.00: ATAPI: OPTIARC DVD-ROM DDU1681S, 1.05, max UDMA/100
[    2.536182] ata2.00: configured for UDMA/100
[    2.538524] scsi 2:0:0:0: CD-ROM            OPTIARC  DVD-ROM DDU1681S 1.05 PQ: 0 ANSI: 5
[    2.541287] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    2.541293] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.541528] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.541694] sr 2:0:0:0: Attached scsi generic sg8 type 5
[    2.704614] usb 3-1: New USB device found, idVendor=076b, idProduct=3021
[    2.704622] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.704628] usb 3-1: Product: Smart Card Reader USB
[    2.704633] usb 3-1: Manufacturer: OMNIKEY AG
[    2.947111] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    3.121717] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.123603] usb 4-1: New USB device found, idVendor=046d, idProduct=c03f
[    3.123611] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.123617] usb 4-1: Product: USB-PS/2 Optical Mouse
[    3.123622] usb 4-1: Manufacturer: Logitech
[    3.152773] hidraw: raw HID events driver (C) Jiri Kosina
[    3.186434] usbcore: registered new interface driver usbhid
[    3.186440] usbhid: USB HID core driver
[    4.094295] random: nonblocking pool is initialized
[   42.318143] Adding 4174844k swap on /dev/sda5.  Priority:-1 extents:1 across:4174844k FS
[   42.567111] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   42.567124] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   43.052900] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   43.139551] systemd-udevd[282]: starting version 204
[   43.560846] lp: driver loaded but no devices found
[   43.624956] ppdev: user-space parallel port driver
[   43.747449] dvb_core: module verification failed: signature and/or  required key missing - tainting kernel
[   43.869825] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
[   43.869895] ngene 0000:03:00.0: found PCI INT A -> IRQ 10
[   43.869919] ngene 0000:03:00.0: sharing IRQ 10 with 0000:00:1d.2
[   43.869968] ngene: Found Digital Devices DuoFlex PCIe or miniPCIe
[   43.909376] type=1400 audit(1422546249.826:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=343 comm="apparmor_parser"
[   43.909393] type=1400 audit(1422546249.826:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=343 comm="apparmor_parser"
[   43.909405] type=1400 audit(1422546249.826:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[   43.923159] type=1400 audit(1422546249.842:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=343 comm="apparmor_parser"
[   43.923178] type=1400 audit(1422546249.842:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[   43.923796] type=1400 audit(1422546249.842:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[   43.947341] ngene: Device version 1
[   44.010488] ngene: Loading firmware file ngene_18.fw.
[   44.091263] ngene 0000:03:00.0: irq 26 for MSI/MSI-X
[   44.146547] error in i2c_read_reg
[   44.146777] No CXD2099 detected at 40
[   44.175754] Channel 0: STV0900
[   44.732009] [drm] Initialized drm 1.1.0 20060810
[   44.819307] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
[   44.831050] hid-generic 0003:046D:C03F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[   44.895736] ACPI Exception: AE_BAD_PARAMETER, Thread 4080608976 could not acquire Mutex [0x1] (20131115/utmutex-285)
[   44.895756] ACPI Exception: AE_BAD_PARAMETER, Thread 4080608976 could not acquire Mutex [0x1] (20131115/utmutex-285)
[   44.895764] ACPI Exception: AE_BAD_PARAMETER, Thread 4080608976 could not acquire Mutex [0x1] (20131115/utmutex-285)
[   45.039719] gma500 0000:00:02.0: found PCI INT A -> IRQ 11
[   45.039749] gma500 0000:00:02.0: sharing IRQ 11 with 0000:00:1d.3
[   45.064016] gma500 0000:00:02.0: irq 27 for MSI/MSI-X
[   45.090009] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   45.090017] [drm] No driver support for vblank timestamp query.
[   45.193510] LNBx2x attached on addr=a
[   45.217829] stv6110x_attach: Attaching STV6110x
[   45.217839] DVB: registering new adapter (nGene)
[   45.217851] ngene 0000:03:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[   45.235538] Channel 1: STV0900
[   45.301747] LNBx2x attached on addr=8
[   45.301762] stv6110x_attach: Attaching STV6110x
[   45.301768] DVB: registering new adapter (nGene)
[   45.301779] ngene 0000:03:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[   45.307559] No demod found on chan 2
[   45.320117] No demod found on chan 3
[   45.503473] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1
[   45.503953] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1
[   45.564302] [drm] forcing LVDS-1 connector OFF
[   45.564309] [drm] forcing DVI-D-1 connector OFF
[   45.564315] [drm] forcing DVI-D-2 connector OFF
[   46.024611] checking generic (cf800000 500000) vs hw (cf800000 7bf000)
[   46.024619] fb: conflicting fb hw usage psbdrmfb vs VESA VGA - removing generic driver
[   46.024673] Console: switching to colour dummy device 80x25
[   46.037076] fbcon: psbdrmfb (fb0) is primary device
[   47.847273] [drm:cdv_intel_dp_complete_link_train] *ERROR* failed to train DP, aborting
[   47.890132] Console: switching to colour frame buffer device 128x48
[   47.924169] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[   47.924172] gma500 0000:00:02.0: registered panic notifier
[   48.078087] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
[   66.747201] init: failsafe main process (621) killed by TERM signal
[   67.351206] Bluetooth: Core ver 2.17
[   67.351266] NET: Registered protocol family 31
[   67.351271] Bluetooth: HCI device and connection manager initialized
[   67.357293] Bluetooth: HCI socket layer initialized
[   67.357304] Bluetooth: L2CAP socket layer initialized
[   67.357326] Bluetooth: SCO socket layer initialized
[   67.434669] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   67.434676] Bluetooth: BNEP filters: protocol multicast
[   67.434693] Bluetooth: BNEP socket layer initialized
[   67.687886] Bluetooth: RFCOMM TTY layer initialized
[   67.687904] Bluetooth: RFCOMM socket layer initialized
[   67.687921] Bluetooth: RFCOMM ver 1.11
[   68.418201] init: samba-ad-dc main process (694) terminated with status 1
[   68.617951] type=1400 audit(1422546274.518:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=773 comm="apparmor_parser"
[   68.617970] type=1400 audit(1422546274.518:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=773 comm="apparmor_parser"
[   68.619167] type=1400 audit(1422546274.518:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=773 comm="apparmor_parser"
[   68.874277] init: cups main process (797) killed by HUP signal
[   68.874318] init: cups main process ended, respawning
[   69.099027] type=1400 audit(1422546274.998:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=827 comm="apparmor_parser"
[   69.099046] type=1400 audit(1422546274.998:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=827 comm="apparmor_parser"
[   69.099770] type=1400 audit(1422546274.998:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=827 comm="apparmor_parser"
[   69.138030] type=1400 audit(1422546275.038:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=828 comm="apparmor_parser"
[   69.138051] type=1400 audit(1422546275.038:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=828 comm="apparmor_parser"
[   69.138064] type=1400 audit(1422546275.038:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=828 comm="apparmor_parser"
[   69.139248] type=1400 audit(1422546275.038:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=828 comm="apparmor_parser"
[   69.825487] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   69.827334] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   69.969556] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   69.970715] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready

 

Ik ben hier geen held in en zie vanalles erin staan maar weet niet wat ik verder hiermee moet / kan.

 

alsmede de cat /proc/cmdline

 

 

mrrepel@server:~$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-3.13.0-30-generic root=UUID=9435b470-7e09-4234-8d69-340d739915fa ro video=LVDS-1:d video=DVI-D-1:d video=DVI-D-2:d acpi=off nomodeset quiet splash vt.handoff=7

Greetz

 

Mr|Repel

 

There are 10 kinds of people in the world

Those who understand binairy and those who don't

 

 

 

RS2000 Rijzende ster

RS2000

Geplaatst:
Geplaatst:

Zie er voor zover ik kan beoordelen niets vreemds aan behalve dat hij maar 1 CPU detecteert.

Ik weet niet of dat in de BIOS is in te stellen voor dat mainboard, maar staan alle cores wel aan?

Wat ik ook wel eens tegengekomen ben is dat de 2de core alleen werd herkend als alle USB apparaten afgekoppeld zijn, dus PC uit, USB kabels eruit, dan PC starten en daarna kan je de USB kabels weer aansluiten.

Maak een account aan of log in om te reageren

Je moet een lid zijn om een reactie te kunnen achterlaten

Account aanmaken

Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!

Registreer een nieuwe account

Inloggen

Heb je reeds een account? Log hier in.

Nu inloggen
 Delen
Ga naar onderwerp-overzicht
×
×
  • Nieuwe aanmaken...