et9000 Xtrend 9000 start opnieuw ivm sofware prbleem

Antoin · 4 maart 2015

Hallo Allemaal,

Ook na flashen blijft het probleem, dat wanneer ik naar een zender zit te kijken en een opname van een andere zender bezig is en deze stopt, ontstaat er een softwareprobleem.

Hoe los ik dit op ?

Met de vriendelijke groet,

Cobus R · 4 maart 2015

krijg je een groen scherm zo ja post die eens. normaal staat deze op hdd.

Antoin · 5 maart 2015

Ik krijg inderdaad een groen scherm, zie bijlage met de crashgegevens,

groet.

Antoin · 5 maart 2015

<?xml version="1.0" encoding="utf-8"?>

<contactemail>forum at www.openpli.org</contactemail>

<skin>PLi-FullHD/skin.xml</skin>

<branch>(no branch)</branch>

</enigma2>

<image>

<![CDATA[

Linux et9x00 3.8.7 #1 SMP Mon Feb 16 04:01:15 CET 2015 mips GNU/Linux

]]>

</kernelversion>

<kernelcmdline> bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=null consoleblank=0</kernelcmdline>

<nimsockets>NIM Socket 0:</nimsockets>

</imageversion>

<![CDATA[

openpli 4 %h

]]>

</imageissue>

</image>

<![CDATA[

n keyRight

playing 1:0:19:17C0:C82:3:EB0000:0:0:0:

[eDVBCAService] free slot 0 demux 0 for service 1:0:19:5225:C99:3:EB0000:0:0:0:

[eDVBCAService] free service 1:0:19:5225:C99:3:EB0000:0:0:0:

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

start release channel timer

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

not pauseable.

new service started! trying to download cuts!

download failed, no cuesheet interface

RemovePopup, id = ZapError

[eDVBLocalTimerHandler] remove channel 0x20ff5d0

[eEPGCache] remove channel 0x20ff5d0

allocate channel.. 0c82:0003

available channel.. 0c82:0003

found shared channel..

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:19:17C0:C82:3:EB0000:0:0:0:

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (020d), and 1 audio stream(s) (0069), and the pcr pid is 020d, and the text pid is 002b

decoder state: play, vpid=525, apid=105

DMX_SET_PES_FILTER(0x20d) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x69) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(0) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux1

VIDEO_SET_STREAMTYPE 1 - ok

DMX_SET_PES_FILTER(0x20d) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x2b) - ttx - ok

DEMUX_START - ttx - ok

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

disable teletext subtitles page ffffffffffffffff (und)

[eDVBCAService] add demux 1 to slot 0 service 1:0:19:17C0:C82:3:EB0000:0:0:0:

[eDVBCAService] don't build/send the same CA PMT twice

RemovePopup, id = ZapError

PATready

use pmtpid 09b0 for service_id 17c0

eventNewProgramInfo 0 0

have 1 video stream(s) (020d), and 1 audio stream(s) (0069), and the pcr pid is 020d, and the text pid is 002b

decoder state: play, vpid=525, apid=105

[eDVBCIInterfaces] gotPMT

[eDVBCAService] don't build/send the same CA PMT twice

AITready

[Dish] tuning failed

VIDEO_GET_EVENT - ok

close frontend 0

action -> InfobarChannelSelection keyLeft

playing 1:0:19:5225:C99:3:EB0000:0:0:0:

[eDVBCAService] free slot 0 demux 1 for service 1:0:19:17C0:C82:3:EB0000:0:0:0:

[eDVBCAService] don't build/send the same CA PMT twice

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

not pauseable.

new service started! trying to download cuts!

download failed, no cuesheet interface

RemovePopup, id = ZapError

allocate channel.. 0c99:0003

available channel.. 0c82:0003

opening frontend 0

(0)tune

RotorCmd ffffffff, lastRotorCmd ffffffff

prepare_sat System 1 Freq 12187000 Pol 0 SR 27500000 INV 2 FEC 2 orbpos 235 system 1 modulation 2 pilot 2, rolloff 0

tuning to 1587 mhz

OURSTATE: tuning

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:19:5225:C99:3:EB0000:0:0:0:

allocate demux

[sEC] set static current limiting

set sequence pos 3

set sequence pos 4

[sEC] setVoltage 2

[sEC] sleep 200ms

[sEC] invalidate current switch params

[sEC] sendDiseqc: e00000(DiSEqC reset)

[sEC] sleep 50ms

[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)

[sEC] sleep 150ms

[sEC] sendDiseqc: e01038f7(?)

[sEC] sleep 50ms

set sequence pos 3

[sEC] setTone 1

[sEC] sleep 10ms

[sEC] update current switch params

[sEC] startTuneTimeout 5000

[sEC] setFrontend 1

setting frontend 0

(0)fe event: status 0, inversion off, m_tuning 1

[sEC] sleep 500ms

(0)fe event: status 1f, inversion off, m_tuning 2

OURSTATE: ok

[eDVBLocalTimerHandler] channel 0x20ff5d0 running

[eEPGCache] channel 0x20ff5d0 running

[EPGC] next update in 22 min

stop release channel timer

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (0207), and 1 audio stream(s) (0063), and the pcr pid is 0207, and the text pid is 0028

allocate demux

decoder state: play, vpid=519, apid=99

DMX_SET_PES_FILTER(0x207) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x63) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(0) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux0

VIDEO_SET_STREAMTYPE 1 - ok

DMX_SET_PES_FILTER(0x207) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x28) - ttx - ok

DEMUX_START - ttx - ok

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

disable teletext subtitles page ffffffffffffffff (und)

[eDVBCAService] new service 1:0:19:5225:C99:3:EB0000:0:0:0:

[eDVBCAService] add demux 0 to slot 0 service 1:0:19:5225:C99:3:EB0000:0:0:0:

RemovePopup, id = ZapError

PATready

use pmtpid 0aa9 for service_id 5225

eventNewProgramInfo 0 0

have 1 video stream(s) (0207), and 1 audio stream(s) (0063), and the pcr pid is 0207, and the text pid is 0028

decoder state: play, vpid=519, apid=99

[eDVBCIInterfaces] gotPMT

[eDVBCAService] don't build/send the same CA PMT twice

AITready

[sEC] set dynamic current limiting

VIDEO_GET_EVENT - ok

[Dish] tuning failed

sdt update done!

[eDVBLocalTimerHandler] diff is 0

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] not changed

action -> OkCancelActions cancel

action -> InfobarExtensions extensions

action -> WizardActions back

action -> EPGSelectActions menu

action -> WizardActions ok

find old format eServiceReference string

lookup events with 'De Wereld Draait Door' in title (ignore case)

action -> OkCancelActions cancel

action -> InfobarMenuActions mainMenu

loading mainmenu XML...

TimerEdit TimerEditList

PluginBrowser PluginBrowser

action -> OkCancelActions cancel

action -> EPGSelectActions blue

action -> EPGSelectActions menu

action -> WizardActions ok

find old format eServiceReference string

lookup events with 'Trauma centrum' in title (ignore case)

action -> OkCancelActions cancel

[eDVBLocalTimerHandler] diff is 0

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] not changed

action -> InfobarChannelSelection keyRight

playing 1:0:19:17C0:C82:3:EB0000:0:0:0:

[eDVBCAService] free slot 0 demux 0 for service 1:0:19:5225:C99:3:EB0000:0:0:0:

[eDVBCAService] free service 1:0:19:5225:C99:3:EB0000:0:0:0:

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

start release channel timer

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

not pauseable.

new service started! trying to download cuts!

download failed, no cuesheet interface

RemovePopup, id = ZapError

[eDVBLocalTimerHandler] remove channel 0x20ff5d0

[eEPGCache] remove channel 0x20ff5d0

allocate channel.. 0c82:0003

available channel.. 0c82:0003

found shared channel..

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:19:17C0:C82:3:EB0000:0:0:0:

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (020d), and 1 audio stream(s) (0069), and the pcr pid is 020d, and the text pid is 002b

decoder state: play, vpid=525, apid=105

DMX_SET_PES_FILTER(0x20d) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x69) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(0) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux1

VIDEO_SET_STREAMTYPE 1 - ok

DMX_SET_PES_FILTER(0x20d) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x2b) - ttx - ok

DEMUX_START - ttx - ok

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

disable teletext subtitles page ffffffffffffffff (und)

[eDVBCAService] add demux 1 to slot 0 service 1:0:19:17C0:C82:3:EB0000:0:0:0:

[eDVBCAService] don't build/send the same CA PMT twice

RemovePopup, id = ZapError

PATready

use pmtpid 09b0 for service_id 17c0

eventNewProgramInfo 0 0

have 1 video stream(s) (020d), and 1 audio stream(s) (0069), and the pcr pid is 020d, and the text pid is 002b

decoder state: play, vpid=525, apid=105

[eDVBCIInterfaces] gotPMT

[eDVBCAService] don't build/send the same CA PMT twice

[Dish] tuning failed

AITready

VIDEO_GET_EVENT - ok

close frontend 0

action -> InfobarChannelSelection keyLeft

playing 1:0:19:5225:C99:3:EB0000:0:0:0:

[eDVBCAService] free slot 0 demux 1 for service 1:0:19:17C0:C82:3:EB0000:0:0:0:

[eDVBCAService] don't build/send the same CA PMT twice

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

not pauseable.

new service started! trying to download cuts!

download failed, no cuesheet interface

RemovePopup, id = ZapError

allocate channel.. 0c99:0003

available channel.. 0c82:0003

opening frontend 0

(0)tune

RotorCmd ffffffff, lastRotorCmd ffffffff

prepare_sat System 1 Freq 12187000 Pol 0 SR 27500000 INV 2 FEC 2 orbpos 235 system 1 modulation 2 pilot 2, rolloff 0

tuning to 1587 mhz

OURSTATE: tuning

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:19:5225:C99:3:EB0000:0:0:0:

allocate demux

[sEC] set static current limiting

set sequence pos 3

set sequence pos 4

[sEC] setVoltage 2

[sEC] sleep 200ms

[sEC] invalidate current switch params

[sEC] sendDiseqc: e00000(DiSEqC reset)

[sEC] sleep 50ms

[sEC] sendDiseqc: e00003(DiSEqC peripherial power on)

[sEC] sleep 150ms

[sEC] sendDiseqc: e01038f7(?)

[sEC] sleep 50ms

set sequence pos 3

[sEC] setTone 1

[sEC] sleep 10ms

[sEC] update current switch params

[sEC] startTuneTimeout 5000

[sEC] setFrontend 1

setting frontend 0

(0)fe event: status 0, inversion off, m_tuning 1

[sEC] sleep 500ms

(0)fe event: status 1f, inversion off, m_tuning 2

OURSTATE: ok

[eDVBLocalTimerHandler] channel 0x20ff5d0 running

[eEPGCache] channel 0x20ff5d0 running

[EPGC] next update in 10 min

stop release channel timer

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (0207), and 1 audio stream(s) (0063), and the pcr pid is 0207, and the text pid is 0028

allocate demux

decoder state: play, vpid=519, apid=99

DMX_SET_PES_FILTER(0x207) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x63) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(0) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux0

VIDEO_SET_STREAMTYPE 1 - ok

DMX_SET_PES_FILTER(0x207) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x28) - ttx - ok

DEMUX_START - ttx - ok

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

disable teletext subtitles page ffffffffffffffff (und)

[eDVBCAService] new service 1:0:19:5225:C99:3:EB0000:0:0:0:

[eDVBCAService] add demux 0 to slot 0 service 1:0:19:5225:C99:3:EB0000:0:0:0:

RemovePopup, id = ZapError

PATready

use pmtpid 0aa9 for service_id 5225

eventNewProgramInfo 0 0

have 1 video stream(s) (0207), and 1 audio stream(s) (0063), and the pcr pid is 0207, and the text pid is 0028

decoder state: play, vpid=519, apid=99

[eDVBCIInterfaces] gotPMT

[eDVBCAService] don't build/send the same CA PMT twice

[sEC] set dynamic current limiting

AITready

[Dish] tuning failed

VIDEO_GET_EVENT - ok

sdt update done!

[eDVBLocalTimerHandler] diff is 0

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] not changed

action -> InfobarShowHideActions toggleShow

action -> InfobarChannelSelection keyRight

playing 1:0:19:17C0:C82:3:EB0000:0:0:0:

[eDVBCAService] free slot 0 demux 0 for service 1:0:19:5225:C99:3:EB0000:0:0:0:

[eDVBCAService] free service 1:0:19:5225:C99:3:EB0000:0:0:0:

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

start release channel timer

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

not pauseable.

new service started! trying to download cuts!

download failed, no cuesheet interface

RemovePopup, id = ZapError

[eDVBLocalTimerHandler] remove channel 0x20ff5d0

[eEPGCache] remove channel 0x20ff5d0

allocate channel.. 0c82:0003

available channel.. 0c82:0003

found shared channel..

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:19:17C0:C82:3:EB0000:0:0:0:

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (020d), and 1 audio stream(s) (0069), and the pcr pid is 020d, and the text pid is 002b

decoder state: play, vpid=525, apid=105

DMX_SET_PES_FILTER(0x20d) - pcr - ok

DEMUX_START - pcr - ok

DMX_SET_PES_FILTER(0x69) - audio - ok

DEMUX_START - audio - ok

AUDIO_SET_BYPASS(0) - ok

AUDIO_PAUSE - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux1

VIDEO_SET_STREAMTYPE 1 - ok

DMX_SET_PES_FILTER(0x20d) - video - ok

DEMUX_START - video - ok

VIDEO_FREEZE - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x2b) - ttx - ok

DEMUX_START - ttx - ok

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

VIDEO_CONTINUE - ok

AUDIO_CONTINUE - ok

disable teletext subtitles page ffffffffffffffff (und)

[eDVBCAService] add demux 1 to slot 0 service 1:0:19:17C0:C82:3:EB0000:0:0:0:

[eDVBCAService] don't build/send the same CA PMT twice

RemovePopup, id = ZapError

PATready

use pmtpid 09b0 for service_id 17c0

eventNewProgramInfo 0 0

have 1 video stream(s) (020d), and 1 audio stream(s) (0069), and the pcr pid is 020d, and the text pid is 002b

decoder state: play, vpid=525, apid=105

[eDVBCIInterfaces] gotPMT

[eDVBCAService] don't build/send the same CA PMT twice

AITready

[Dish] tuning failed

VIDEO_GET_EVENT - ok

close frontend 0

action -> InfobarActions showMovies

loading streaminfo for /media/hdd/movie/20150304 1915 - NPO2 HD - De kennis van nu.ts

loading streaminfo for /media/hdd/movie/20150303 2215 - NPO 1 HD - De Rijdende Rechter.ts

read error

[@ML] m_streaminfo.getLastFrame failed, fallback

loading streaminfo for /media/hdd/movie/20150304 1915 - NPO2 HD - De kennis van nu.ts

action -> ColorActions red

action -> WizardActions down

action -> DirectionActions downUp

unknown action DirectionActions/downUp! typo in keymap?

action -> WizardActions ok

[Timer] Remove RecordTimerEntry(name=De kennis van nu, begin=Wed Mar 4 19:15:00 2015, serviceref=1:0:19:17C0:C82:3:EB0000:0:0:0:, justplay=0)

time changed

[TIMER] activating state 3

[TIMER] stop recording

stop recording!

[eFilePushThreadRecorder] stopping thread.

[eDVBRecordFileThread] waiting for aio to complete

[eDVBRecordFileThread] buffer usage histogram (20 buffers of 188 kB)

0: 2

1: 6841

2: 19

[eFilePushThreadRecorder] THREAD STOP

loading streaminfo for /media/hdd/movie/20150304 1915 - NPO2 HD - De kennis van nu.ts

fixed up 1095c761c to 19d5ea5 (offset 0)

[TIMER] record event 5

Traceback (most recent call last):

File "/usr/lib/enigma2/python/Navigation.py", line 60, in dispatchRecordEvent

File "/usr/lib/enigma2/python/Tools/Trashcan.py", line 57, in gotRecordEvent

File "/usr/lib/enigma2/python/Tools/Trashcan.py", line 84, in cleanIfIdle

File "/usr/lib/python2.7/site-packages/twisted/internet/threads.py", line 71, in deferToThread

File "/usr/lib/python2.7/site-packages/twisted/internet/base.py", line 989, in getThreadPool

File "/usr/lib/python2.7/site-packages/twisted/internet/base.py", line 954, in _initThreadPool

File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 18, in <module>

ImportError: No module named contextlib

(PyObject_CallObject(<bound method Navigation.dispatchRecordEvent of <Navigation.Navigation instance at 0x193a2b0>>,(<enigma.iRecordableServicePtr; proxy of <Swig Object of type 'ePtr< iRecordableService > *' at 0x2143998> >, 1)) failed)

]]>

</enigma2crashlog>

</crashlogs>

</openpli>

**ceesv** · 5 maart 2015

krijg je een groen scherm zo ja post die eens. normaal staat deze op hdd.

Dit stond er ook sjaak!

Antoin · 5 maart 2015

Waar kan ik het email adres vinden om de crash te versturen

**ceesv** · 5 maart 2015

De 6e regel van boven in het rapport.

<contactemail>forum at www.openpli.org</contactemail>

Antoin · 5 maart 2015

Hallo Ceesv

Ik heb van alles geprobeerd oa info@openpli.org of Info@www.openpli.org</contactemail enz.krijg ik email terug, dat het ontvangen is

Maar wat is nu het juiste Email adres, kan iemand mij dat vertellen!

Inloggen

et9000 Xtrend 9000 start opnieuw ivm sofware prbleem

Aanbevolen berichten

Antoin

Cobus R

Antoin

Antoin

ceesv

Antoin

ceesv

Antoin

Maak een account aan of log in om te reageren

Account aanmaken

Inloggen

Wie is er online 0 leden

Gerelateerde inhoud

Vervanger voor mijn xtrend

et9000 Display op ontvanger doet niets meer

et9000 ET9000 elke 38 sec. beeld even weg

et9000 EPG en tijd na overgang wintertijd onjuist

et9000 Tuner ET9000 defect?

et9000 Alleen nog FTA-zenders te zien ...

et9000 ET 9000 vervangen

Overig

Activiteit