vu plus solo 2 VU+ en Oscam blokkerig beeld

Mike34 · 21 december 2017

Door een nieuwe versie van Blackhole (ik had nog een hele oude draaien) moest in van cccam naar Oscam. Oscam netjes geinstalleerd. Wat mij opviel dat Oscam alléén mijn bovenste reader zag (CI module). Nu had ik nog een CI module liggen dus die erin met mijn (oranje) CD card. In eerste instantie lijkt het goed te gaan. De zender die op staat werkt prima. Wanneer ik zap gaat het echter mis. Ik krijg een blokkerig beeld en dat heb ik, vooralsnog, niet weg gekregen. Met de instellingen van Oscam heb ik nog niet veel gedaan (gebrek aan kennis) dat ziet er nu dus zo uit:

Oscam.conf:

[global]
logfile                       = /dev/tty
clienttimeout                 = 4000
clientmaxidle                 = 300
netprio                       = 1
nice                          = -1
maxlogsize                    = 1000
waitforcards                  = 0
preferlocalcards              = 1
dropdups                      = 1

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 0
request_mode                  = 1
user                          = linuxsatsupport
read_sdt                      = 1
write_sdt_prov                = 1
boxtype                       = dreambox

[webif]
httpport                      = 8888
httpshowmeminfo               = 1
httpshowuserinfo              = 1
httpshowcacheexinfo           = 1
httpshowecminfo               = 1
httpshowloadinfo              = 1
httpallowed                   = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log               = 1

[newcamd]
port                          = 10001@
key                           = 0102030405060708091011121314
mgclient                      = 1
keepalive                     = 1

[cccam]
port                          = 12000
version                       = 2.1.3
build                         = 3165
reshare                       = 1

en de oscam.server:

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11392
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt

[reader]
label                         = emulator
protocol                      = emu
device                        = emulator
caid                          = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect                        = cd
ident                         = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group                         = 1
emmcache                      = 2,1,2,1
emu_auproviders               = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

Dit is mijn logfile

2017/12/21 11:14:15 00000000 s     (main) System name    = Linux
2017/12/21 11:14:15 00000000 s     (main) Host name      = vusolo2
2017/12/21 11:14:15 00000000 s     (main) Release        = 3.13.5
2017/12/21 11:14:15 00000000 s     (main) Version        = #1 SMP Wed Oct 18 00:02:34 CEST 2017
2017/12/21 11:14:15 00000000 s     (main) Machine        = mips
2017/12/21 11:14:15 00000000 s     (main) Stb model      = dm8000
2017/12/21 11:14:15 00000000 s     (main) Stb vumodel    = vusolo2
2017/12/21 11:14:15 00000000 s     (main) Stb boxtype    = vusolo2
2017/12/21 11:14:15 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6887
2017/12/21 11:14:15 00000000 s      (emu) OSCam-Emu version 754
2017/12/21 11:14:15 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2017/12/21 11:14:15 00000000 s     (main) signal handling initialized
2017/12/21 11:14:15 00000000 s   (config) 1 provid's loaded
2017/12/21 11:14:15 00000000 s   (config) 6 service-id's loaded in 0 ms
2017/12/21 11:14:15 00000000 s      (net) newcamd: initialized (fd=6, port=10001, prio=1 [ SO_PRIORITY IP_TOS ])
2017/12/21 11:14:15 00000000 s      (net) cccam: initialized (fd=7, port=12000, prio=1 [ SO_PRIORITY IP_TOS ])
2017/12/21 11:14:15 00000000 s   (reader) emulator [emu] creating thread for device emulator
2017/12/21 11:14:15 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/12/21 11:14:15 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2017/12/21 11:14:15 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2017/12/21 11:14:15 00000000 s (anticasc) anti cascading disabled
2017/12/21 11:14:15 2EFD510E c   (client) plain dvbapi-client granted (linuxsatsupport, au=off)
2017/12/21 11:14:15 2EFD510E c   (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2017/12/21 11:14:15 675C54F2 r      (emu) Key file not found in: /var/tuxbox/config
2017/12/21 11:14:15 2EFD510E c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2017/12/21 11:14:15 675C54F2 r      (emu) Key file not found in: /var/keys
2017/12/21 11:14:15 675C54F2 r   (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2017/12/21 11:14:15 00000000        (emu) INFO: FFDecsa parallel mode = 64
2017/12/21 11:14:15 144A293D h    (webif) webif: decompressed 177772 bytes back into 437640 bytes
2017/12/21 11:14:15 144A293D h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2017/12/21 11:14:16 675C54F2 r   (reader) emulator [emu] card detected
2017/12/21 11:14:17 675C54F2 r   (reader) emulator [emu] found card system emu
2017/12/21 11:14:17 675C54F2 r   (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2017/12/21 11:14:17 675C54F2 r      (emu) Key file not found in: /var/tuxbox/config
2017/12/21 11:14:17 675C54F2 r      (emu) Key file not found in: /var/keys
2017/12/21 11:14:19 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1817 ECM_PID: 0711 PROVID: 00006A 
2017/12/21 11:14:19 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 1818 ECM_PID: 0725 PROVID: 00006C 
2017/12/21 11:14:19 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 1819 ECM_PID: 0739 PROVID: 00006D 
2017/12/21 11:14:19 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0100 ECM_PID: 0711 PROVID: 00006A PBM: FFE000000000000 DATE: 21-12-2017
2017/12/21 11:14:19 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 0100 ECM_PID: 0725 PROVID: 00006C PBM: FFE000000000000 DATE: 21-12-2017
2017/12/21 11:14:19 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 5 CAID: 0100 ECM_PID: 0739 PROVID: 00006D PBM: FFE000000000000 DATE: 21-12-2017
2017/12/21 11:14:19 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 6 CAID: 0500 ECM_PID: 0C39 PROVID: 051900 
2017/12/21 11:14:19 2EFD510E c   (dvbapi) Demuxer 0 found 7 ECMpids and 6 STREAMpids in caPMT
2017/12/21 11:14:19 2EFD510E c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/12/21 11:14:19 2EFD510E c   (dvbapi) Demuxer 0 found 7 ECMpids and 6 STREAMpids in PMT
2017/12/21 11:14:23 2EFD510E c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/12/21 11:14:27 2EFD510E c   (dvbapi) Demuxer 0 stop descrambling program number 5225 (NPO1 HD)
2017/12/21 11:14:28 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1817 ECM_PID: 0716 PROVID: 00006A 
2017/12/21 11:14:28 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 1818 ECM_PID: 0729 PROVID: 00006C 
2017/12/21 11:14:28 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 1819 ECM_PID: 0758 PROVID: 00006D 
2017/12/21 11:14:28 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0100 ECM_PID: 0716 PROVID: 00006A PBM: FFE000000000000 DATE: 21-12-2017
2017/12/21 11:14:28 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 0100 ECM_PID: 0729 PROVID: 00006C PBM: FFE000000000000 DATE: 21-12-2017
2017/12/21 11:14:28 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 5 CAID: 0100 ECM_PID: 0758 PROVID: 00006D PBM: FFE000000000000 DATE: 21-12-2017
2017/12/21 11:14:28 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 6 CAID: 0500 ECM_PID: 0C3D PROVID: 051900 
2017/12/21 11:14:28 2EFD510E c   (dvbapi) Demuxer 0 found 7 ECMpids and 5 STREAMpids in caPMT
2017/12/21 11:14:28 2EFD510E c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/12/21 11:14:28 2EFD510E c   (dvbapi) Demuxer 0 found 7 ECMpids and 5 STREAMpids in PMT
2017/12/21 11:14:32 2EFD510E c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/12/21 11:15:15 2EFD510E c        (-) -- Skipped 8 duplicated log lines --
2017/12/21 11:15:15 2EFD510E c   (dvbapi) Demuxer 0 stop descrambling program number 17C0 (NPO2 HD)
2017/12/21 11:15:16 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1817 ECM_PID: 070A PROVID: 00006A 
2017/12/21 11:15:16 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0100 ECM_PID: 070A PROVID: 00006A PBM: FFE000000000000 DATE: 21-12-2017
2017/12/21 11:15:16 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0C1E PROVID: 051900 
2017/12/21 11:15:16 2EFD510E c   (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in caPMT
2017/12/21 11:15:16 2EFD510E c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/12/21 11:15:16 2EFD510E c   (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in PMT
2017/12/21 11:15:20 2EFD510E c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/12/21 11:16:20 2EFD510E c        (-) -- Skipped 10 duplicated log lines --
2017/12/21 11:16:23 2EFD510E c        (-) -- Skipped 1 duplicated log lines --
2017/12/21 11:16:23 2EFD510E c   (dvbapi) Demuxer 0 stop descrambling program number 1B6F (RTL5 HD)
2017/12/21 11:16:24 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1817 ECM_PID: 0711 PROVID: 00006A 
2017/12/21 11:16:24 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 1818 ECM_PID: 0725 PROVID: 00006C 
2017/12/21 11:16:24 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 1819 ECM_PID: 0739 PROVID: 00006D 
2017/12/21 11:16:24 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0100 ECM_PID: 0711 PROVID: 00006A PBM: FFE000000000000 DATE: 21-12-2017
2017/12/21 11:16:24 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 0100 ECM_PID: 0725 PROVID: 00006C PBM: FFE000000000000 DATE: 21-12-2017
2017/12/21 11:16:24 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 5 CAID: 0100 ECM_PID: 0739 PROVID: 00006D PBM: FFE000000000000 DATE: 21-12-2017
2017/12/21 11:16:24 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 6 CAID: 0500 ECM_PID: 0C39 PROVID: 051900 
2017/12/21 11:16:24 2EFD510E c   (dvbapi) Demuxer 0 found 7 ECMpids and 6 STREAMpids in caPMT
2017/12/21 11:16:24 2EFD510E c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/12/21 11:16:24 2EFD510E c   (dvbapi) Demuxer 0 found 7 ECMpids and 6 STREAMpids in PMT
2017/12/21 11:16:28 2EFD510E c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/12/21 11:16:41 2EFD510E c        (-) -- Skipped 2 duplicated log lines --
2017/12/21 11:16:41 2EFD510E c   (dvbapi) Demuxer 0 stop descrambling program number 5225 (NPO1 HD)
2017/12/21 11:16:42 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1817 ECM_PID: 070B PROVID: 00006A 
2017/12/21 11:16:42 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0100 ECM_PID: 070B PROVID: 00006A PBM: FFE000000000000 DATE: 21-12-2017
2017/12/21 11:16:42 2EFD510E c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0C1F PROVID: 051900 
2017/12/21 11:16:42 2EFD510E c   (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in caPMT
2017/12/21 11:16:42 2EFD510E c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/12/21 11:16:42 2EFD510E c   (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in PMT
2017/12/21 11:16:46 2EFD510E c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/12/21 11:17:46 2EFD510E c        (-) -- Skipped 11 duplicated log lines --
2017/12/21 11:18:46 2EFD510E c        (-) -- Skipped 12 duplicated log lines --
2017/12/21 11:19:46 2EFD510E c        (-) -- Skipped 12 duplicated log lines --

Kan iemand zo zeggen wat ik moet veranderen?

Alvast super bedankt.

21 december 2017 aangepast door Mike34
toevoeging

henkvd1 · 21 december 2017

je oscam server aanpassen , de emulator leest geen kaarten, daar gaat het fout.

[reader]
label = CDkaart
protocol = internal
device = /dev/sci0
autospeed = 0
boxkey =
ecmwhitelist = 0100@00006A:64
detect = cd
mhz = 450
cardmhz = 2700
ident = 0100:000000,00006A
group = 2
emmcache = 2,1,0,0
lb_weight = 150
dropbadcws = 1
auprovid = 00006A
ratelimitecm = 4
ratelimittime = 9000
srvidholdtime = 2000

[reader]
label = CDkaart
protocol = internal
device = /dev/sci1
autospeed = 0
boxkey =
ecmwhitelist = 0100@00006A:64
detect = cd
mhz = 450
cardmhz = 2700
ident = 0100:000000,00006A
group = 2
emmcache = 2,1,0,0
lb_weight = 150
dropbadcws = 1
auprovid = 00006A
ratelimitecm = 4
ratelimittime = 9000
srvidholdtime = 2000

21 december 2017 aangepast door henkvd1

Mike34 · 21 december 2017

5 minuten geleden zei henkvd1:

je oscam server aanpassen , de emulator leest geen kaarten, daar gaat het fout.

Hoi Henk.

Ik ben erg nieuw in deze materie maar hoe moet ik het aanpassen? Het gekke is dat sommige kanalen het wel gewoon goed doen (de meeste rtl-en bijvoorbeeld)

henkvd1 · 21 december 2017

open oscam.server file en plak bovenstaande erin en verwijder je reader met device emulator, dan opslaan en herstarten, dan werken beide kaartlezers.

Mike34 · 21 december 2017

7 minuten geleden zei henkvd1:

open oscam.server file en plak bovenstaande erin en verwijder je reader met device emulator, dan opslaan en herstarten, dan werken beide kaartlezers.

Dank je Henk

Ok, gedaan en nu de card in het onderste slot gedaan (interne lezer). Is dat de juiste?

2017/12/21 11:39:33 00000000 s     (main) System name    = Linux
2017/12/21 11:39:33 00000000 s     (main) Host name      = vusolo2
2017/12/21 11:39:33 00000000 s     (main) Release        = 3.13.5
2017/12/21 11:39:33 00000000 s     (main) Version        = #1 SMP Wed Oct 18 00:02:34 CEST 2017
2017/12/21 11:39:33 00000000 s     (main) Machine        = mips
2017/12/21 11:39:33 00000000 s     (main) Stb model      = dm8000
2017/12/21 11:39:33 00000000 s     (main) Stb vumodel    = vusolo2
2017/12/21 11:39:33 00000000 s     (main) Stb boxtype    = vusolo2
2017/12/21 11:39:33 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 10285
2017/12/21 11:39:33 00000000 s      (emu) OSCam-Emu version 754
2017/12/21 11:39:33 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2017/12/21 11:39:33 00000000 s     (main) signal handling initialized
2017/12/21 11:39:33 00000000 s   (config) 1 provid's loaded
2017/12/21 11:39:33 00000000 s   (config) 12 service-id's loaded in 1 ms
2017/12/21 11:39:33 00000000 s      (net) newcamd: initialized (fd=6, port=10001, prio=1 [ SO_PRIORITY IP_TOS ])
2017/12/21 11:39:33 00000000 s      (net) cccam: initialized (fd=7, port=12000, prio=1 [ SO_PRIORITY IP_TOS ])
2017/12/21 11:39:33 00000000 s   (reader) CDkaart [internal] creating thread for device /dev/sci0
2017/12/21 11:39:33 00000000 s   (reader) CDkaart [internal] creating thread for device /dev/sci1
2017/12/21 11:39:33 00000000 s   (reader) emulator [emu] creating thread for device emulator
2017/12/21 11:39:33 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/12/21 11:39:33 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2017/12/21 11:39:33 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2017/12/21 11:39:33 00000000 s (anticasc) anti cascading disabled
2017/12/21 11:39:33 5096FD7F r   (reader) CDkaart [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2017/12/21 11:39:33 5096FD7F r   (reader) CDkaart [internal] Reader sci internal, detected box type: vusolo2
2017/12/21 11:39:33 5FDFC1E7 r   (reader) CDkaart [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2017/12/21 11:39:33 5FDFC1E7 r   (reader) CDkaart [internal] Reader sci internal, detected box type: vusolo2
2017/12/21 11:39:33 18430FFA r      (emu) Key file not found in: /var/tuxbox/config
2017/12/21 11:39:33 18430FFA r      (emu) Key file not found in: /var/keys
2017/12/21 11:39:33 00000000        (emu) INFO: FFDecsa parallel mode = 64
2017/12/21 11:39:33 18430FFA r   (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2017/12/21 11:39:33 62D7E517 c   (client) plain dvbapi-client granted (linuxsatsupport, au=off)
2017/12/21 11:39:33 62D7E517 c   (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2017/12/21 11:39:33 62D7E517 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2017/12/21 11:39:33 5D21D15C h    (webif) webif: decompressed 177772 bytes back into 437640 bytes
2017/12/21 11:39:33 5D21D15C h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2017/12/21 11:39:34 18430FFA r   (reader) emulator [emu] card detected
2017/12/21 11:39:34 5FDFC1E7 r   (reader) CDkaart [internal] card detected
2017/12/21 11:39:35 5FDFC1E7 r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:39:35 5FDFC1E7 r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:39:35 5FDFC1E7 r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:39:35 18430FFA r   (reader) emulator [emu] found card system emu
2017/12/21 11:39:35 18430FFA r   (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2017/12/21 11:39:35 5FDFC1E7 r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:39:35 5FDFC1E7 r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:39:35 5FDFC1E7 r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:39:35 18430FFA r      (emu) Key file not found in: /var/tuxbox/config
2017/12/21 11:39:35 18430FFA r      (emu) Key file not found in: /var/keys
2017/12/21 11:39:36 5FDFC1E7 r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:39:36 5FDFC1E7 r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:39:36 5FDFC1E7 r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:39:37 5FDFC1E7 r   (reader) CDkaart [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/12/21 11:39:37 5FDFC1E7 r   (reader) CDkaart [internal] card initializing error
2017/12/21 11:39:49 5096FD7F r   (reader) CDkaart [internal] card detected
2017/12/21 11:39:50 5096FD7F r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:39:50 5096FD7F r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:39:50 5096FD7F r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:39:50 5096FD7F r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:39:50 5096FD7F r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:39:50 5096FD7F r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:39:51 5096FD7F r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:39:51 5096FD7F r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:39:51 5096FD7F r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:39:52 5096FD7F r   (reader) CDkaart [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/12/21 11:39:52 5096FD7F r   (reader) CDkaart [internal] card initializing error
2017/12/21 11:40:03 5FDFC1E7 r   (reader) CDkaart [internal] card detected
2017/12/21 11:40:04 5FDFC1E7 r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:40:04 5FDFC1E7 r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:40:04 5FDFC1E7 r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:40:04 5FDFC1E7 r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:40:04 5FDFC1E7 r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:40:04 5FDFC1E7 r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:40:05 5FDFC1E7 r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:40:05 5FDFC1E7 r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:40:05 5FDFC1E7 r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:40:06 5FDFC1E7 r   (reader) CDkaart [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/12/21 11:40:06 5FDFC1E7 r   (reader) CDkaart [internal] card initializing error
2017/12/21 11:40:25 5096FD7F r   (reader) CDkaart [internal] card detected
2017/12/21 11:40:26 5096FD7F r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:40:26 5096FD7F r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:40:26 5096FD7F r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:40:26 5096FD7F r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:40:26 5096FD7F r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:40:26 5096FD7F r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:40:27 5096FD7F r   (reader) CDkaart [internal] ATR: 00 00 
2017/12/21 11:40:27 5096FD7F r   (reader) CDkaart [internal] ERROR: Could not read reader->convention
2017/12/21 11:40:27 5096FD7F r   (reader) CDkaart [internal] Error activating card.
2017/12/21 11:40:28 5096FD7F r   (reader) CDkaart [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/12/21 11:40:28 5096FD7F r   (reader) CDkaart [internal] card initializing error

henkvd1 · 21 december 2017

Haal deze regels eens weg in beide readers, heb de config ook niet van me zelf nml.

autospeed = 0
boxkey =

**Tonskidutch** · 21 december 2017

waarom gebruik je deze zeer onstabiele emulator versie van Oscam?

waarom neem je niet die uit het Image feed?

Mike34 · 21 december 2017

1 minuut geleden zei Tonskidutch:

waarom gebruik je deze zeer onstabiele emulator versie van Oscam?

waarom neem je niet die uit het Image feed?

Oh? Waar vind ik die precies.... Sorry voor deze beginnersvraag..

**Tonskidutch** · 21 december 2017

ha goeie,

die hebben geen softcams in de feed

zag ik ook net

stom image

Mike34 · 21 december 2017

22 minuten geleden zei Tonskidutch:

ha goeie,

die hebben geen softcams in de feed

zag ik ook net

stom image

~~Waar kan ik een stabiele versie downloaden?~~

Dank voor de link

21 december 2017 aangepast door Mike34

Mike34 · 21 december 2017

Goed, volgende ronde.

Ik heb nu de 6089 geinstalleerd.

Op zich is het wel raar dat die via het web niet bereikbaar is: 192.168.0.5:8888 (gecheckt in de config file).

Verder de instellingen van Henk gebruikt maar nog steeds geen beeld

**Tonskidutch** · 21 december 2017

ja en heb je nu wel instellingen van Henk voor een emulator overgenomen???

dat is toch niet de bedoeling

je hebt een kaart dus moet je ook de standaard config en readers nemen voor CD

[reader]
label                         = Reader Canaaldigitaal 
protocol                      = internal
device                        = /dev/sci0
detect                        = cd
ident                         = 0100:00006a
group                         = 1
emmcache                      = 1,3,2

henkvd1 · 21 december 2017

voor de webif zou je moeten kijken wat er in je oscam.conf staat.

check wat er bij http allowed staat of dat binnen de ip range valt, in het voorbeeld werkt het altjd en of er een user name en password in staan, hier root root

[webif]
httpport                      = 8888
httpuser                      = root
httppwd                       = root
httprefresh                   = 10
httppollrefresh               = 10
httpallowed                   = 0.0.0.0-255.255.255.255

21 december 2017 aangepast door henkvd1

DeltaFM · 21 december 2017

Heb je de kaarten er wel goed om in? Je ATR is namelijk voor beide kaarten 00 00... oftewel geen communicatie met beide kaarten.

Hoe het dan kan dat sommige kanalen het wel doen, daar kunnen we het (beter) niet over hebben.

**Tonskidutch** · 21 december 2017

je mag wel alle logs boven bekijken en niet enkel die met 00 00

Inloggen

vu plus solo 2 VU+ en Oscam blokkerig beeld

Aanbevolen berichten

Mike34

Beste reacties in dit onderwerp

Populaire dagen

Beste reacties in dit onderwerp

Populaire dagen

henkvd1

Mike34

henkvd1

Mike34

henkvd1

Tonskidutch

Mike34

Tonskidutch

Mike34

Mike34

Tonskidutch

henkvd1

DeltaFM

Tonskidutch

Maak een account aan of log in om te reageren

Account aanmaken

Inloggen

Wie is er online 0 leden

Gerelateerde inhoud

vu plus uno 4k Kijken en opnemen lukt niet, tuner B valt weg

vu plus algemeen Aankondigingen VTI 15.x Updates 1 2

vu plus ultimo 4k picons voor telenet zenders?

vu plus zero VU + Zero en Hanssettings

vu plus solo 4k symbolen van zenders op het scherm

vu plus algemeen Naam harde schijf aanpassen Hoedoe je dat?

vu plus uno 4k Opnames mislukken soms: 0 bytes opgenomen 1 2

Overig

Activiteit