Gast Geplaatst: 18 november 2002 Delen Geplaatst: 18 november 2002 Wie kan mij helpen aan een lijst met error meldingen voor een Humax 5400 loader 2.08 (geen Z),of wie weet wat de melding E-AU inhoud. bv dank fred Link naar reactie Delen op andere sites Meer opties om te delen...
TheWizard Geplaatst: 18 november 2002 Delen Geplaatst: 18 november 2002 Kijk ff hier bij Humax. TheWizard! Ik denk alleen aan mezelf want, als iedereen aan zich zelf denkt wordt er aan iedereen gedacht! Link naar reactie Delen op andere sites Meer opties om te delen...
Gast Geplaatst: 21 november 2002 Delen Geplaatst: 21 november 2002 <img src="/ubbthreads/images/graemlins/confused.gif" alt="" /> bedankt voor antwoord maar link werk helaas niet. Link naar reactie Delen op andere sites Meer opties om te delen...
Gast Geplaatst: 21 november 2002 Delen Geplaatst: 21 november 2002 De informatie op de site van satcity is voor mij ook onvindbaar. Graag uitleg waar op de site dit te vinden is. Dit overzicht heb ik van de echte humax site gehaald: 3. Error messages When you have any problem during downloading,you may see one of the following error code at the front panel display: E-HC/bC Incorrect header block(CRC-16) The software seems damaged while you receive from web site or e-mail. Pls receive the software again and try to download E-dC Incorrect data block(CRC-16) The software seems damaged while you receive from web site or e-mail. Pls receive the software again and try to download E-Hn/bF Invalid HDF version This error can be occured when you attempt to download Non-Superset STB software to Superset or Vice-Versa.Pls check the STB model and the software E-Id Invalid system ID This error can be occured when you attempt to download F1 software to F1-CI. Pls check the STB model and the software E-AC Incorrect application CRC-32 Download latest version of application sw. If it doesn't make it,the flash memory can be thought to be defected E-ut UART RX/TX time out There is communication problem between source and target 1) Check whether the S/W is compressed or not and Check whether you use the proper download tool for the software 2) Reduce the download speed and try to download again 3) STB main power Off/On and try to download again 4) Reset the PC and try to download again E-Ad Invalid address Humax made the hdf file with wrong address.Pls notify this error to us and wait until we release the proper software. E-Ao Invalid offset address for upload(Odd offset) There was a mistake when we made hdf file from binary file.Pls let us know immediately and wait new release version E-Ft Flash program time out The flash memory in STB seems damaged. Pls try to download one more time. If you fail agian,send us back to replace the flash memory device E-It/Et EEPROM program time out The EEPROM in STB seems damaged.Pls try to download one more time. If you fail again,replace the EEPROM device E-FE Fail compare after flash write Flash memory is damaged.Return the main board(CPU Board) E-HF Invalid HDF Format It means that the file you try to download is not a valid HDF format. The file could be damaged in which case you should try downloading it from the Humax web site again. Also please check the file extension is HDF. Also make sure you are using the correct download tool - Wdn4oak+. It can be also occurred when there is some problem on cable, data of PC and loader. E-Fn Invalid flash device Flash memory is defected Need to change the flash memory so Pls return the Main Board E-AS Incorrect application size Check the software version and STB hardware specification Link naar reactie Delen op andere sites Meer opties om te delen...
Gast Geplaatst: 21 november 2002 Delen Geplaatst: 21 november 2002 Ik heb via PM een link gestuurd naar freka met de foutmeldingen. Helaas staat deze foutmelding er niet. Error Auto-Update?? <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> Link naar reactie Delen op andere sites Meer opties om te delen...
FredjeV Geplaatst: 22 november 2002 Delen Geplaatst: 22 november 2002 Hier de foutmelding (overigens gewoon van SatCity..) E-HC/bC Incorrect header block(CRC-16) The software seems damaged while you receive from web site or e-mail. Pls receive the software again and try to download E-dC Incorrect data block(CRC-16) The software seems damaged while you receive from web site or e-mail. Pls receive the software again and try to download E-Hn/bF Invalid HDF version This error can be occured when you attempt to download Non-Superset STB software to Superset or Vice-Versa.Pls check the STB model and the software E-Id Invalid system ID This error can be occured when you attempt to download F1 software to F1-CI. Pls check the STB model and the software E-AC Incorrect application CRC-32 Download latest version of application S/W E-ut UART RX/TX time out There is communication problem between source and target 1) Check whether the S/W is compressed or not and Check whether you use the proper download tool for the software 2) Reduce the download speed and try to download again 3) STB main power Off/On and try to download again 4) Reset the PC and try to download again E-Ad Invalid address Humax made the hdf file with wrong address.Pls notify this error to us and wait until we release the proper software. E-Ao Invalid offset address for upload(Odd offset) There was a mistake when we made hdf file from binary file.Pls let us know immediately and wait new release version E-Ft Flash program time out The flash memory in STB seems damaged. Pls try to download one more time. If you fail agian,send us back to replace the flash memory device E-It/Et EEPROM program time out The EEPROM in STB seems damaged.Pls try to download one more time. If you fail again,replace the EEPROM device E-FE Fail compare after flash write Flash memory is damaged.Return the main board(CPU Board) E-HF Invalid HDF Format Humax made the hdf file with wrong version. Pls notify this error to us and wait until we release proper software E-Fn Invalid flash device Flash memory is defected Need to change the flash memory so Pls return the Main Board E-AS Incorrect application size Check the software version and STB hardware specification Rebox RE8500 V2.11.34 Link naar reactie Delen op andere sites Meer opties om te delen...
Gast Geplaatst: 22 november 2002 Delen Geplaatst: 22 november 2002 Ook geen "E-AU" te bespeuren... Link naar reactie Delen op andere sites Meer opties om te delen...
FredjeV Geplaatst: 22 november 2002 Delen Geplaatst: 22 november 2002 Ach we zetten hem er gewoon bij E-Au Undefined application error check everything again.... <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> Rebox RE8500 V2.11.34 Link naar reactie Delen op andere sites Meer opties om te delen...
Gast Geplaatst: 26 november 2002 Delen Geplaatst: 26 november 2002 Iedereen bedankt voor reacties op mijn vraag. Na installeren van nieuwe software in mijn Hummie is probleem opgelost. Maar was wel benieuwd wat foutcode inhield. Groeten, F vd K Link naar reactie Delen op andere sites Meer opties om te delen...
Aanbevolen berichten
Maak een account aan of log in om te reageren
Je moet een lid zijn om een reactie te kunnen achterlaten
Account aanmaken
Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!
Registreer een nieuwe accountInloggen
Heb je reeds een account? Log hier in.
Nu inloggen