satanixx Geplaatst: 2 februari 2003 Auteur Geplaatst: 2 februari 2003 Jippie dat was het waarschijnlijk Xon/Xoff. Hieronder volgt de output die ik dan krijg. Ben benieuw: Dreambox DM7000 loaded at: 00500000 006061F8 relocated to: 00400000 005061F8 board data at: 00503128 00503168 relocated to: 0040555C 0040559C zimage at: 00405A98 00502280 avail ram: 00507000 02000000 Linux/PPC load: console=none root=/dev/mtdblock/0 console=none root=/dev/mtdbloc k/0 console=ttyS0,115200 Uncompressing Linux...done. Now booting the kernel Linux version 2.4.19-rc3 (tmbinc@stb4500) (gcc version 3.2) #106 Mon Oct 14 15:3 1:39 CEST 2002 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=none root=/dev/mtdblock/0 console=none root=/dev/mt dblock/0 console=ttyS0,115200 Console: colour dummy device 80x25 Calibrating delay loop... 251.49 BogoMIPS Memory: 29896k available (1856k kernel code, 536k data, 84k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket OCP uart ver 1.5 init complete Starting kswapd devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright © 1996 okir@monad.swb.de). JFFS version 1.0, © 1999, 2000 Axis Communications AB JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-proc.o version 2.6.1 (20010825) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xe0040000 (irq = 20) is a 16550A ttyS01 at 0xe0000000 (irq = 21) is a 16550A ttyS02 at 0xe00e0000 (irq = 31) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx IBM IDE ocp driver version 2.2 ide_stb04xxx: waiting for drive ready......Drive spun up RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com) eth0: SMC91C11xFD(r:1) at 0xc3081300 IRQ:28 INTF:<NULL> MEM:8192b NOWAIT:0 ADDR 00:09:34:00:07:52 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Linux video capture interface: v1.00 dreambox: flash mapping: 800000 at 7f800000 Using buffer write method Creating 5 MTD partitions on "DreamBOX rev3+": 0x00000000-0x00600000 : "DreamBOX cramfs" 0x00600000-0x007c0000 : "DreamBOX jffs2" 0x007c0000-0x00800000 : "DreamBOX OpenBIOS" 0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)" 0x00000000-0x00800000 : "DreamBOX (w/ bootloader)" IBM On-chip iic (i2c) algorithm module 2002.30.04 iic_ibmocp_init: IBM on-chip iic adapter module i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 0 i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 0. i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 1 i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 1. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver NET4: Ethernet Bridge 008 for NET4.0 VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 84k init serial console detected. Disabling virtual terminals. init started: BusyBox v0.61.pre (2002.05.26-17:53+0000) multi-call binary fb: loaded Console: switching to colour frame buffer device 90x36 pfb: fb0: Pallas frame buffer device i2c-core.o: driver DreamBOX frontprocessor registered. i2c-core.o: client [fp] registered to adapter [iBM OCP IIC adapter](pos. 0). fp: attaching fp at 0xee to adapter IBM OCP IIC adapter error occured: 43 incomplete xfer nack event: init ... core: Loaded IBM STB04xxx core driver [CI] insert detected write 1 event's ... registering device. demux: inited xp0_clk_stop [XP1] Init [XP1] 896KBytes used for Queues ist da doch was mit 1394? i2c-core.o: driver stv0299 DVB demodulator registered. i2c-core.o: client [stv0299] registered to adapter [iBM OCP IIC adapter](pos. 1) . registering frontend... already got one. i2c-core.o: driver Mitel tuner driver registered. i2c-core.o: client [Dreambox Tuner Driver] registered to adapter [iBM OCP IIC ad apter](pos. 2). lcd.o: LCD driver (KS0713) module i2c-core.o: driver DreamBOX AV-Switch registered. i2c-core.o: client [avs] registered to adapter [iBM OCP IIC adapter](pos. 3). avs: attaching avs at 0x94 to adapter IBM OCP IIC adapter error occured: 43 incomplete xfer nack Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes empty_blocks 0, bad_blocks 0, c->nr_blocks 14 mount: Mounting /dev/mtdblock/1 on /var failed: Invalid argument cp: cannot create directory `/var/etc': Read-only file system cp: cannot create directory `/var/tmp': Read-only file system cp: cannot create directory `/var/tuxbox': Read-only file system mount: Mounting none on /var/tmp failed: No such file or directory cd: can't cd to /var/tmp mount: Mounting /dev/ide/host0/bus0/target0/lun0/part1 on /hdd failed: No such f ile or directory /dev/ide/host0/bus0/target0/lun0/disc: No such file or directory /dev/ide/host0/bus0/target0/lun0/disc: No such file or directory /etc/init.d/rcS: /var/tuxbox/start_enigma: No such file or directory Please press Enter to activate this console. BusyBox v0.61.pre (2002.05.26-17:53+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. / >ls bin etc lib proc sbin tmp var_init dev hdd mnt root share var / > Suc6 satanixx Vaak weet ik het, maar soms heb ik een zetje nodig. Hobby is Hobby. 2 x dream + 120 Gbit, 2 x humax 5400 en 1 maal philips 6071
Ronaldd Geplaatst: 2 februari 2003 Geplaatst: 2 februari 2003 Je /var filesysteem lijkt corrupt: Ik zie dat je in de shell zit. In deze shell even het volgende commando geven en rebooten: eraseall /dev/mtd/1 Dat zou het probleem moeten oplossen. Ronald My DM(800|7025) is Ronaldd powered
satanixx Geplaatst: 3 februari 2003 Auteur Geplaatst: 3 februari 2003 Heren, Allemaal bedankt hij doet het weer. Waar zo'n board al niet goed voor is. Bepaart me weer een retoutje uden, nijmegen of Purmerent. Satanixx Vaak weet ik het, maar soms heb ik een zetje nodig. Hobby is Hobby. 2 x dream + 120 Gbit, 2 x humax 5400 en 1 maal philips 6071
Gast Geplaatst: 26 april 2003 Geplaatst: 26 april 2003 Goeieavond, Heb hier een box staan met de volgende melding op display UCO error Onderstaande is de log van de opstart Blijkbaar een fout ook in de /Var Maar ik kom niet in de shell, iemand een oplossing ? lost arb C562B11 lost arb8 C0015B lost arbFC 10021 lost arb974ab zi lost arb 0040 lost arb0389ad a lost arb 1100000 lost arb040E0C 1 lost arbFF3B680 lost arb0: C0174 lost arb20000000 lost arb http:/ lost arborg/lkml lost arbtainted lost arbmation a lost arbted modu lost arb/misc/av lost arb lost a Dreambox DM7000mpressing Linux loaded at: 00500000 006141F8 avs will taint the kernel: forc relocated to: 00400000 005141F8.20 (ghost@client) (gcc versi Se board data at: 00511128 005111683 insmod: ca.o: no module by tha relocated to: 00404BE4 00404C240l taint VFS ET 2003 insmod: sc zimage at: 00405120 00510389ound05 les G zone(0): 8192 p avail ram: 00515000 02000000dules/2.4.20/misc/fb.obesr= zone Linux/PPC load: console=ttyS0,115200 root=/dev/mtdblock/0 rwernel: non-GPL license - proprietarysr0= 0x00000000 besr1= 0 Uncompressing Linux...done.000/modules Console: olour Now booting the kernelR00: C562B114 C1DFDE40 devfs Page-cache hash table entries: 8192 (order: 3, 32768 bytes)-GPL license - proprietaryb.c: registered Kern Now booti d POSIX conformance testing by UNIFIXnux See h JFFS2 version 2.1. © PCI: Probing PCI hardwareed by Axis Communications Linux NET4.0 for Linux 2.4y UNIFIXt hid-core.c: USB Based upon Swansea University Computer Society NET3.039e taint the kernel: forced l i2c-dev.o: i2c /dev entrie Initializing RT netlink socketinsmod: A module named fb i2c- OCP uart ver 1.6.2 init completeer registered. co Using /lib/mod Starting kswapd/sdev.o0 rweras Journalled Block Device driver loaded loading sdev will taint the kernel p devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)Serial driver version 5.05c (2001-07-08) wittailay loop... 25 devfs: boot_o INTF:<NULL> MEM:8192b NOWAIT:0 ADDR 00:09:34:00:0e:65memory: IBM IDE ocp driver version 2.2rv.o: no module SCSI subsyste ide_redwood: waiting for drive ready......Drive spun upnt: kmod: failed to exec /sbin/modprobe -s -k scsi_host RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksizebIt w i2c lost ar kmod: failed to exec /sbin/modprobe -s -k scsi_host loop: loaded (max 8 devices)t arbgured 0x lost arbAMDISK smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com)obe -s -k scsi_hostadapter, errno = 2c-de lost arb/dev ent los eth0: SMC91C11xFD(r:1) at 0xc3081300 IRQ:28 dreambox: flash mapping: 800000 at 7f80000 INTF:<NULL> MEM:8192b NOWAIT:0 ADDR 00:09:34:00:0e:65sh VPP0 005141F8i2c-pro Creating 5 MTD partitions on "D SCSI subsystem driver Revision: 1.00256 Unix98 ptys confi re 0x00000000- kmod: failed to exec /sbin/modprobe -s -k scsi_hostadape at: 00405 usb-ohci.c: usb-ocp, builtinter S Initializing USB Mass usb.c: new USB bus registered, assigned bus number 1 51 usb.c: registered new driver usb-storageostadapt hub.c: USB hub foundci.c: usb-o USB Mass hub.c: 2 ports detectedred.24 (order: 0, 4096 usb.c: registered new driver hiddevevice common for all mice= 2gu Page usb.c: registered new driver hid IBM On-chip iic (i2c) algorithm hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>ce iic_ibmocp_init: IBM on-chip iic adapter module0-0x0 PCI: Pro hid-core.c: USB HID support driversc-dev.o: Registered 'IBM OCP IIC ad Initializing USB Mass Storage driver...sea University Computer Society i2c-cor usb.c: registered new driver usb-storageed as adapter 0.Initializing RT netlink USB Mass Storage support registered.OCP i2c-dev.o: Registered 'IBM OCP I NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.40000 is not formatted. It will be erased is a 1655 VFS: Mounted root (cramfs filesystem).r Linu Uniform Mult JFFS2: Erase block Mounted devfs on /devformatted. It will be Freeing unused kernel memory: 96k initg 50MHz system bus speed for PIO mod J init started: BusyBox v0.60.5 (2003.03.08-01:32+0000) multi-call binarynt's ...ne(0): 8192 pages. IBM IDE ocp driver version 2.2lgor JFFS2: Er JFFS2: Erase block at 0x00000000 is not formatted. It will be erased up_init: IBM on-chip iic adapter moduler registered as ad JFFS2: Er JFFS2: Erase block at 0x00020000 is not formatted. It will be erasednor 0 TCP/IP 1.0 for NET4.0dummy er JFFS2: Erase block at JFFS2: Er JFFS2: Erase block at 0x00040000 is not formatted. It will be erased08/22/01 by Daris A Nevil (dnevil@snmc.com) Erase b i2c-de JFFS2: Erase block at 0x00180000 is not formatted. It will be erased114 C1DFDE40 C1DFC000 0 See http://www.tux.org/lkml/#export-tainte JFFS2: Erase block at 0x001a0000 is not formatted. It will be erasedthat na GPR08: 40000300 C5630000 usb-ohci.c: US lesCI Warning: load Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes.c: usb-ocp, builtin Console: switching to colour frame buffer device 90 mount: Mounting /dev/mtdblock/1 on /var failed: Invalid argument0: Pallas frame buffer deviceb foundlost GPR24: C1DA500 hub.c: Using /lib/modules/2.4.20/misc/fb.ov.o usb.c: registered new driver hi Warning: loading fb will taint tfb: loadedduleregistered new driver hid he kernel: non-GPL lice registering device.: Linux TCP/IP 1.0 demux: lesedo i2c-core.o: driver DreamBOX frontprocessor registered.CP [XP1] 896KBytes used for Queuesrouting cache hash i2c-core.o: client [fp] registered to adapter [iBM OCP IIC adapter](pos. 0).e bl TCP: Hash tables configured (establishe error occured: 73 information a fp: attaching fp at 0xee to adapter IBM OCP IIC adapterain id is wrong (0 != 0xa1)x NET4.0. 204 lesrde Wa err error occured: 43 taint the ke inc incomplete xfer (cramfs fi nac nack los event: init ... is wrong (0 != CICCR:00800088vfs on /devfra core: Loaded IBM STB04xxx core driverel memory: 96k initort-tainte Using / write 1 event's ...isc/avs.orted: Bus registering device.3.08-0 Warning: loa demux: initedtaint i2c-cor xp0_clk_stopreamBOX AV-S [XP1] Inittered/dr W [XP1] 896KBytes used for QueuesS2: Erase b lock at 0x00000000 i2c-core.o: driver stv0299 DVB-lost ae Warning: loading avs will taint i2c-core.o: driver DreamBOX AV-Switch registeredk TASK = c1dfc000[29] 'insmod' Last syscall: 128edeamBOX frontprocessor registe .d the kernel: non-lost arb000000 last altivec 0000 GPL license - prlost arbat 0x000a0000 is no PLB0 oprietary00000000 SeeOops: kernel access of bad area, sig: 11be era write 1 event's ...o: no modul NIP: C0174F00 XER: 20000000 LR: C562B114 SP: C1DFDE40 REGS: c1dfdd90 TRAP: 0800d argumentd [XP1] Init hiddev error occured: 43used GPR00: C562B114 C1DFDE40 Tainted: PF000 C562B91000 insmod: sci_drv.o: no module by that name foundng /lib/modules/2.4.20/m Call backtrace: XER: 2 Using / C562B5CC C562B114 C562B758 C0015B50 C00044FC 10021518 10022974 Warning: loading fb will taint the kernel: non-GPL license - 10040E0C 10040A04 0FF3B680 00000000SR: 00009030 EE: See http://www. http://www.tux.org/lkml/#export-tainted for information about tainted modulest tainted moduesr0= 0x00000000 besr1= TASK = c1dfc000[29] 'insm lesLas See http://www.tux.org/lkml/#export-tainted for information about tainted modu les Warning: loading fb will taint the kernel: forced load insmod: A module named fb already exists Using /lib/modules/2.4.20/misc/sdev.o Warning: loading sdev will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modu les insmod: A module named sdev already exists Using /lib/modules/2.4.20/misc/dream.o Warning: loading dream will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modu les insmod: A module named dream already exists Using /lib/modules/2.4.20/misc/avs.o Warning: loading avs will taint the kernel: non-GPL license - proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modu les Warning: loading avs will taint the kernel: forced load insmod: A module named avs already exists insmod: ca.o: no module by that name found insmod: sci_drv.o: no module by that name found umount: /var: Invalid argument
Ronaldd Geplaatst: 26 april 2003 Geplaatst: 26 april 2003 Citaat: Goeieavond, Heb hier een box staan met de volgende melding op display UCO error Onderstaande is de log van de opstart Blijkbaar een fout ook in de /Var Maar ik kom niet in de shell, iemand een oplossing ? Mischien kan je in de shell komen door control-c in te drukken. PS de log messages zien er nu minder vraai uit, het lijkt erop dat er tijdens de insmod van avs een 'kernel oops' plaats vind, dit heeft mijn DB ook en staat nu bij dream in de werkplaats. PS2 De log messages zijn niet geheel compleeet, hier en daar mist een stuk text. Ronald My DM(800|7025) is Ronaldd powered
Gast Geplaatst: 27 april 2003 Geplaatst: 27 april 2003 Dit is nu het resultaat Dreambox DM7000 loaded at: 00500000 006141F8 relocated to: 00400000 005141F8 board data at: 00511128 00511168 relocated to: 00404BE4 00404C24 zimage at: 00405120 00510389 avail ram: 00515000 02000000 Linux/PPC load: console=ttyS0,115200 root=/dev/mtdblock/0 rw Uncompressing Linux...done. Now booting the kernel Linux version 2.4.20 (ghost@client) (gcc version 3.2.1) #5 Die Feb 25 02:32:01 CET 2003 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,115200 root=/dev/mtdblock/0 rw Console: colour dummy device 80x25 Calibrating delay loop... 251.49 BogoMIPS Memory: 29784k available (1900k kernel code, 592k data, 96k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket OCP uart ver 1.6.2 init complete Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. © 2001 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-proc.o version 2.6.1 (20010825) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xe0040000 (irq = 20) is a 16550A ttyS01 at 0xe0000000 (irq = 21) is a 16550A ttyS02 at 0xe00e0000 (irq = 31) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx IBM IDE ocp driver version 2.2 ide_redwood: waiting for drive ready......Drive spun up RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com) eth0: SMC91C11xFD(r:1) at 0xc3081300 IRQ:28 INTF:<NULL> MEM:8192b NOWAIT:0 ADDR 00:09:34:00:0e:65 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 dreambox: flash mapping: 800000 at 7f800000 disable flash VPP Creating 5 MTD partitions on "DreamBOX rev3+": 0x00000000-0x00600000 : "DreamBOX cramfs" 0x00600000-0x007c0000 : "DreamBOX jffs2" 0x007c0000-0x00800000 : "DreamBOX OpenBIOS" 0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)" 0x00000000-0x00800000 : "DreamBOX (w/ bootloader)" usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xc3886000, IRQ 18 usb-ohci.c: usb-ocp, builtin usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice IBM On-chip iic (i2c) algorithm module 2002.30.04 iic_ibmocp_init: IBM on-chip iic adapter module i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 0 i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 0. i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 1 i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 1. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (cramfs filesystem). Mounted devfs on /dev Freeing unused kernel memory: 96k init init started: BusyBox v0.60.5 (2003.03.08-01:32+0000) multi-call binary Using /lib/modules/2.4.20/misc/fb.o Warning: loading fb will taint tfb: loaded he kernel: non-GPL license - proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modules Warning: loading fb will taint the kernel: forced load Console: switching to colour frame buffer device 90x36 pfb: fb0: Pallas frame buffer device Using /lib/modules/2.4.20/misc/sdev.o Warning: loadingsdev: Loading sdev module sdev will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modules Using /lib/modules/2.4.20/misc/dream.o Warning: loading dream will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modules i2c-core.o: driver DreamBOX frontprocessor registered. i2c-core.o: client [fp] registered to adapter [iBM OCP IIC adapter](pos. 0). fp: attaching fp at 0xee to adapter IBM OCP IIC adapter error occured: 43 incomplete xfer nack event: init ... CICCR:00800088 core: Loaded IBM STB04xxx core driver write 1 event's ... registering device. demux: inited xp0_clk_stop [XP1] Init [XP1] 896KBytes used for Queues i2c-core.o: driver stv0299 DVB demodulator registered. error occured: 73 incomplete xfer nack lost arb id is wrong (0 != 0xa1) error occured: 73 incomplete xfer nack lost arb id is wrong (0 != 0xa1) lcd.o: LCD driver (KS0713) module Using /lib/modules/2.4.20/misc/avs.o Warning: loading avs will taint i2c-core.o: driver DreamBOX AV-Switch registered. the kernel: non-lost arb GPL license - prlost arb oprietary SeeOops: kernel access of bad area, sig: 11 NIP: C0174F00 XER: 20000000 LR: C564C114 SP: C1DEFE40 REGS: c1defd90 TRAP: 0800 Tainted: PF MSR: 00009030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DEAR: 0000002C, ESR: 00000000 TASK = c1dee000[30] 'insmod' Last syscall: 128 last math 00000000 last altivec 00000000 PLB0: bear= 0x00000000 acr= 0x00000000 besr= 0x00000000 PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000 GPR00: C564C114 C1DEFE40 C1DEE000 00000000 C564C910 00000008 00000000 05050328 GPR08: 40000300 C5650000 00000000 C0174EF0 82004022 10075ED4 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 01DEFF40 C1DEFEA8 10087FE0 GPR24: C1D7B000 C02F5B40 C0220000 C021BC68 FFFFFFEA C0230000 C564CAD0 00000000 Call backtrace: C564C5CC C564C114 C564C758 C0015B50 C00044FC 10021518 10022974 10040E0C 10040A04 0FF3B680 00000000 http://www.tux.org/lkml/#export-tainted for information about tainted modules Warning: loading avs will taint the kernel: forced load Segmentation fault insmod: ca.o: no module by that name found insmod: sci_drv.o: no module by that name found Using /lib/modules/2.4.20/misc/fb.o Warning: loading fb will taint the kernel: non-GPL license - proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modules Warning: loading fb will taint the kernel: forced load insmod: A module named fb already exists Using /lib/modules/2.4.20/misc/sdev.o Warning: loading sdev will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modules insmod: A module named sdev already exists Using /lib/modules/2.4.20/misc/dream.o Warning: loading dream will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modules insmod: A module named dream already exists Using /lib/modules/2.4.20/misc/avs.o Warning: loading avs will taint the kernel: non-GPL license - proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modules Warning: loading avs will taint the kernel: forced load insmod: A module named avs already exists insmod: ca.o: no module by that name found insmod: sci_drv.o: no module by that name found Heb eraseall uitgevoerd van de /0 en /1 , heeft niet geholpen. Daarna nog eens een erase.img ingezet en daarna een officieel image, en dit is het resultaat. Nog enige raadgevingen voor deze box vertrekt naar ....
Ronaldd Geplaatst: 27 april 2003 Geplaatst: 27 april 2003 Ziet er zo'n beetje hetzelfde uit als mijn DB. Bij mij hielp flashen ook niet meer. Bij mij is het zo dat als de DB een nacht zonder spanning heeft gestaan, hij het weer een uur of zo goed doet. Als dat bij jou ook zo is meld dat dan als je hem terug brengt naar dealer, je weet maar nooit mischien gaat box direct retour als hij het doet. Mijn tips: 1 laad origineel image. 2 Breng terug naar dealer. Ronald My DM(800|7025) is Ronaldd powered
Aanbevolen berichten
Maak een account aan of log in om te reageren
Je moet een lid zijn om een reactie te kunnen achterlaten
Account aanmaken
Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!
Registreer een nieuwe accountInloggen
Heb je reeds een account? Log hier in.
Nu inloggen