Opstartfouten wie kan me helpen !!!!!

[Gast]

Hoi,

 

Ik heb met de terminal console de opstartfouten opgevangen

sinds 2 weken heb ik dit:

wie kan me helpen om eraf te komen

ik heb echt alles geprobeerd: eraseall en alles wat op het board staat.

 

De text is lang dus hier komt ie:

Linux/PPC load: console=ttyS0,115200 root=/dev/mtdblock/0

Uncompressing Linux...done.

Now booting the kernel

Linux version 2.4.20 (ghost@client) (gcc version 3.2.1) #24 Mon Mär 17 00:08:28

CET 2003

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0,115200 root=/dev/mtdblock/0

Console: colour dummy device 80x25

Calibrating delay loop... 251.49 BogoMIPS

Memory: 29812k available (1880k kernel code, 588k data, 92k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

PCI: Probing PCI hardware

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

OCP uart ver 1.6.2 init complete

Starting kswapd

Journalled Block Device driver loaded

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.1. © 2001 Red Hat, Inc., designed by Axis Communications AB.

i2c-core.o: i2c core module

i2c-dev.o: i2c /dev entries driver module

i2c-core.o: driver i2c-dev dummy driver registered.

i2c-proc.o version 2.6.1 (20010825)

pty: 256 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en

abled

ttyS00 at 0xe0040000 (irq = 20) is a 16550A

ttyS01 at 0xe0000000 (irq = 21) is a 16550A

ttyS02 at 0xe00e0000 (irq = 31) is a 16550A

Uniform Multi-Platform E-IDE driver Revision: 6.31

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

IBM IDE ocp driver version 2.2

ide_redwood: waiting for drive ready......Drive spun up

hda: Maxtor 5T030H3, ATA DISK drive

ide0 at 0xc307d1f8-0xc307d1ff,0xc307d1f6 on irq 25

hda: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=59554/16/63, UDMA(33)

Partition check:

/dev/ide/host0/bus0/target0/lun0: p1

loop: loaded (max 8 devices)

smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com)

eth0: SMC91C11xFD(r:1) at 0xc3083300 IRQ:28

INTF:<NULL> MEM:8192b NOWAIT:0 ADDR 00:09:34:00:2a:2e

SCSI subsystem driver Revision: 1.00

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

dreambox: flash mapping: 800000 at 7f800000

disable flash VPP

Creating 5 MTD partitions on "DreamBOX rev3+":

0x00000000-0x00600000 : "DreamBOX cramfs"

0x00600000-0x007c0000 : "DreamBOX jffs2"

0x007c0000-0x00800000 : "DreamBOX OpenBIOS"

0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"

0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-ohci.c: USB OHCI at membase 0xc3888000, IRQ 18

usb-ohci.c: usb-ocp, builtin

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

usb.c: registered new driver hiddev

usb.c: registered new driver hid

hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>

hid-core.c: USB HID support drivers

usb.c: registered new driver dc2xx

dc2xx.c: v1.0.0:USB Camera Driver for Kodak DC-2xx series cameras

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

USB Mass Storage support registered.

mice: PS/2 mouse device common for all mice

IBM On-chip iic (i2c) algorithm module 2002.30.04

iic_ibmocp_init: IBM on-chip iic adapter module

i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 0

i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 0.

i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 1

i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 1.

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (cramfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 92k init

init started: BusyBox v0.60.5 (2003.03.08-01:32+0000) multi-call binary

Using /lib/modules/2.4.20/misc/fb.o

Warning: loading fb will taint tfb: loaded

he kernel: non-GPL license - proprietary

See http://www.tux.org/lkml/#export-tainted for information about tainted modu

les

Warning: loading fb will taint the kernel: forced load

Console: switching to colour frame buffer device 90x36

pfb: fb0: Pallas frame buffer device

Using /lib/modules/2.4.20/misc/sdev.o

Warning: loadingsdev: Loading sdev module

sdev will taint the kernel: forced load

See http://www.tux.org/lkml/#export-tainted for information about tainted modu

les

Using /lib/modules/2.4.20/misc/dream.o

Warning: loading dream will taint the kernel: forced load

See http://www.tux.org/lkml/#export-tainted for information about tainted modu

les

i2c-core.o: driver DreamBOX frontprocessor registered.

i2c-core.o: client [fp] registered to adapter [iBM OCP IIC adapter](pos. 0).

fp: attaching fp at 0xee to adapter IBM OCP IIC adapter

error occured: 43

incomplete xfer

nack

event: init ...

CICCR:00800088

core: Loaded IBM STB04xxx core driver

write 1 event's ...

registering device.

demux: inited

xp0_clk_stop

[XP1] Init

[XP1] 896KBytes used for Queues

i2c-core.o: driver stv0299 DVB demodulator registered.

i2c-core.o: client [stv0299] registered to adapter [iBM OCP IIC adapter](pos. 1)

.

registering frontend...

enable continuous tone

already got one.

i2c-core.o: driver Mitel tuner driver registered.

i2c-core.o: client [Dreambox Tuner Driver] registered to adapter [iBM OCP IIC ad

apter](pos. 2).

lcd.o: LCD driver (KS0713) module

Using /lib/modules/2.4.20/misc/avs.o

Warning: loading avs will taint i2c-core.o: driver DreamBOX AV-Switch registered

.

the kernel: non-i2c-core.o: client [avs] registered to adapter [iBM OCP IIC adap

ter](pos. 3).

GPL license - pravs: attaching avs at 0x94 oprietary

Seeto adapter IBM OCP IIC adapter

http://www.tux.error occured: 43

org/lkml/#exportincomplete xfer

-tainted for infnack

ormation about tainted modules

Warning: loading avs will taint the kernel: forced load

insmod: ca.o: no module by that name found

insmod: sci_drv.o: no module by that name found

Using /lib/modules/2.4.20/misc/fb.o

Warning: loading fb will taint the kernel: non-GPL license - proprietary

See http://www.tux.org/lkml/#export-tainted for information about tainted modu

les

Warning: loading fb will taint the kernel: forced load

insmod: A module named fb already exists

Using /lib/modules/2.4.20/misc/sdev.o

Warning: loading sdev will taint the kernel: forced load

See http://www.tux.org/lkml/#export-tainted for information about tainted modu

les

insmod: A module named sdev already exists

Using /lib/modules/2.4.20/misc/dream.o

Warning: loading dream will taint the kernel: forced load

See http://www.tux.org/lkml/#export-tainted for information about tainted modu

les

insmod: A module named dream already exists

Using /lib/modules/2.4.20/misc/avs.o

Warning: loading avs will taint the kernel: non-GPL license - proprietary

See http://www.tux.org/lkml/#export-tainted for information about tainted modu

les

Warning: loading avs will taint the kernel: forced load

insmod: A module named avs already exists

insmod: ca.o: no module by that name found

insmod: sci_drv.o: no module by that name found

Uncompressing Enigma...

 

/dev/ide/host0/bus0/target0/lun0/disc:

setting standby to 120 (10 minutes)

 

/dev/ide/host0/bus0/target0/lun0/disc:

setting acoustic management to 128

acoustic = 128 (128=quiet ... 254=fast)

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

/etc/init.d/rcS: /bin/nmbd: No such file or directory

eth0: PHY=LAN83C183 (LAN91C111 Internal)

Copying key-files from "/var/keys/" to "/var/tmp/".

libpng warning: Ignoring gAMA chunk with gamma=0

libpng warning: Invalid cHRM white point

libpng warning: Ignoring gAMA chunk with gamma=0

libpng warning: Invalid cHRM white point

libpng warning: Ignoring gAMA chunk with gamma=0

libpng warning: Invalid cHRM white point

libpng warning: Ignoring gAMA chunk with gamma=0

libpng warning: Invalid cHRM white point

set event: 00000008

ci-open

disable continuous tone

(0)commited command sent

FBLK:1

set_vsw1:5

FBLK:1

FNC:2

FNC:2

killall: nmbd: no process killed

/bin/nmbd: No such file or directory

enable continuous tone

Welcome to the enigma serial access.

you may start a HTTP session now if you send a "break".

HTTP/1.0 200 OK

Connection: close

Content-Type: text/plain

 

 

 

[pmt.tmp] Information:

02 b0 b5 0f ab fb 00 00 e0 85 f0 06 09 04 06 02 e5 03 c6 e

1 98 f0 00 02 e0 a2 f0 26 09 11 01 00 e5 df 00 19 ff 00 00 00 00 00 00 00 04 1a

b0 09 11 01 00 e6 43 00 6a ff 00 00 00 00 00 00 22 04 1a b0 04 e0 58 f0 2c 0a 04

64 75 74 00 09 11 01 00 e5 df 00 19 ff 00 00 00 00 00 00 00 04 1a b0 09 11 01 0

0 e6 43 00 6a ff 00 00 00 00 00 00 22 04 1a b0 06 e0 22 f0 07 56 05 64 75 74 09

00 c0 e0 d0 f0 21 c6 05 00 00 10 04 ff c2 18 4e 45 44 5f 5f 45 50 47 4e 45 44 5f

5f 50 49 4c 4e 45 44 5f 5f 43 48 4c c1 e0 fa f0 0a c2 08 50 49 4c 4f 54 45 00 0

0 7e df 22 91

 

killall: gbox: no process killed

killall: mgcamd: no process killed

 

 

 

gbox v0.996

mode: any pid

AU:01/update:02/KeyFile:01 Hash:01 DispECM:01/EMM:01 UDP

Init:00 OSD:00

*ECM: CA ID: 0x0602 Irdeto -> CA PID: 0x

0503

*ECM: CA ID: 0x0100 Seca/Mediaguard (0019) -> CA PID: 0x05DF

ECM:

CA ID: 0x0100 Seca/Mediaguard (006A) -> CA PID: 0x0643

**** hashTableEC

M 2 elements ****

==== Irdeto ECM on CaID 0x0602, pid 0x0503 ====

prov:00, chid: F

FF5, par:13, key#:02, date:098E

using pkey: 98 09 7D 7A AA 17 51 9E

CW0: 08 00 0

0 EC 10 90 80 55

CW1: 00 00 00 C9 40 90 30 AE

Signature OK

=====================

==========================

wget: server returned error 404: HTTP/1.1 404 Not Foun

d

keyupdate: Update failed, check your network and URL.

 

 

 

 

 

[Gast]

Na een dagje op het board nog steeds geen reactie

HELP HELP

ik wil best met een schone Enigma eens proberen als iemand me verteld hoe ik hem moet opbouwen

 

of

een erase.img maar daar krijg ik constant de foutmeding

file to big error -7

 

[hemertje]

met dreamup kan je ook "ereasen"

 

succes!

[Gast]

dat heb ik gedaan

moet je toch standaard doen ?

ik zou graag die forced loaded weg hebben

 

[RBx]

De betekenis van de melding 'tainted module' is dat de linux kernel developers hiermee hebben willen aangeven dat in de bewuste kernel code gebruikt is die niet volledig freeware is, waar zijn geen sources van hebben, die buiten hun controle valt.

 

Citaat:

What does it mean for a module to be tainted?

(REG, contributed by John Levon) Some vendors distribute binary modules (i.e. modules without available source code under a free software license). As the source is not freely available, any bugs uncovered whilst such modules are loaded cannot be investigated by the kernel hackers. All problems discovered whilst such a module is loaded must be reported to the vendor of that module, not the Linux kernel hackers and the linux-kernel mailing list. The tainting scheme is used to identify bug reports from kernels with binary modules loaded: such kernels are marked as "tainted" by means of the MODULE_LICENSE tag. If a module is loaded that does not specify an approved license, the kernel is marked as tainted. The canonical list of approved license strings is in linux/include/linux/module.h.

"oops" reports marked as tainted are of no use to the kernel developers and will be ignored. A warning is output when such a module is loaded. Note that you may come across module source that is under a compatible license, but does not have a suitable MODULE_LICENSE tag. If you see a warning from modprobe or insmod for a module under a compatible license, please report this bug to the maintainers of the module, so that they can add the necessary tag.

(KO) If a symbol has been exported with EXPORT_SYMBOL_GPL then it appears as unresolved for modules that do not have a GPL compatible MODULE_LICENSE string, and prints a warning. A module can also taint the kernel if you do a forced load. This bypasses the kernel/module verification checks and the result is undefined, when it breaks you get to keep the pieces.

(KO) According to Alan Cox, a license of "BSD without advertisement clause" is not a suitable free software license. This license type allows binary only modules without source code. Any modules in the kernel tarball with this license should really be "Dual BSD/GPL".

 

Wat is eigenlijk het probleem: het feit dat er bij het aanzetten van de dreambox een hoop meldingen over het TV-scherm komen (afhankelijk van de geinstalleerde distributie is dit normaal), of dat er geen beeld is <img src="/ubbthreads/images/graemlins/confused.gif" alt="" />

[Gast]

Klopt,

hij doet het wel

maar wat ik niet snap is dat ik opeens die foutmeldingen krijg

die had ik niet

dus ik heb het idee dat er iets niet goed zit en dat

het straks misschien wel zo erg wordt dat hij het niet meer doet

 

[hemertje]

dan heb je zeker 2 weken geleden nieuwe image geflashed!!!

 

in de laatste traveller images is dit standaard <img src="/ubbthreads/images/graemlins/xyxthumbs.gif" alt="" />

 

nix aan de hand dus!

[Gast]

Nou,

het is dezelfde images

die had het dus eerst niet

maar het is een gehele geruststelling

thanx

ik dacht ik de enige was die dit had