usb 2.0 pendrive of CF+usb reader

[rongogo]

 

Dit is dan de autput van dmesg <img src="/ubbthreads/images/graemlins/confused.gif" alt="" />

 

~ > dmesg <img src="/ubbthreads/images/graemlins/confused.gif" alt="" />

iver] registered to adapter [iBM OCP IIC adapter](pos. 2).

lcd.o: LCD driver (KS0713) module

i2c-core.o: driver DreamBOX AV-Switch registered.

i2c-core.o: client [avs] registered to adapter [iBM OCP IIC adapter](pos. 3).

avs: attaching avs at 0x94 to adapter IBM OCP IIC adapter

error occured: 43

incomplete xfer

nack

sdev: Loading sdev module

INT:8

enable_irq(8) unbalanced

INT:16

enable_irq(16) unbalanced

/dev/ide/host0/bus0/target0/lun0: p1

/dev/ide/host0/bus0/target0/lun0: p1

VFS: Can't find ext3 filesystem on dev ide0(3,1).

/dev/ide/host0/bus0/target0/lun0: p1

/dev/ide/host0/bus0/target0/lun0: p1

cramfs: wrong magic

/dev/ide/host0/bus0/target0/lun0: p1

/dev/ide/host0/bus0/target0/lun0: p1

FAT: bogus logical sector size 0

VFS: Can't find a valid FAT filesystem on dev 03:01.

/dev/ide/host0/bus0/target0/lun0: p1

/dev/ide/host0/bus0/target0/lun0: p1

Unable to identify CD-ROM format.

/dev/ide/host0/bus0/target0/lun0: p1

/dev/ide/host0/bus0/target0/lun0: p1

jffs2: attempt to mount non-MTD device 03:01

/dev/ide/host0/bus0/target0/lun0: p1

/dev/ide/host0/bus0/target0/lun0: p1

reiserfs: checking transaction log (device 03:01) ...

Using r5 hash to sort names

ReiserFS version 3.6.25

hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }

hda: task_no_data_intr: error=0x01 { AddrMarkNotFound }, LBAsect=0, sector=0

dummycon (0)<3>fbcon_setup: No support for fontwidth 8

fbcon_setup: type 0 (aux 0, depth 8) not supported

set event: 00000009

ci-open

[DENC] set mode to FBAS

[AVS] FBLK:0

set_vsw1:5

[DENC] set mode to FBAS

[AVS] FBLK:0

[AVS] FNC:2

[DENC] disable WSS

[AVS] FNC:2

eth0:PHY remote fault detected

disable continuous tone

(0)commited command sent

(0)commited command sent

(0)commited command sent

enable continuous tone

need zigzag, freq=2071000

fe_zigzag: i=00 freq=2071000 inversion 1

fe_zigzag: i=01 freq=2070500 inversion 0

fe_zigzag: i=01 freq=2070500 inversion 1

fe_zigzag: i=02 freq=2071500 inversion 0

fe_zigzag: i=02 freq=2071500 inversion 1

fe_zigzag: i=03 freq=2070000 inversion 0

fe_zigzag: i=03 freq=2070000 inversion 1

fe_zigzag: i=04 freq=2072000 inversion 0

fe_zigzag: i=04 freq=2072000 inversion 1

fe_zigzag: i=05 freq=2069500 inversion 0

fe_zigzag: i=05 freq=2069500 inversion 1

fe_zigzag: i=06 freq=2072500 inversion 0

fe_zigzag: i=06 freq=2072500 inversion 1

fe_zigzag: i=07 freq=2069000 inversion 0

fe_zigzag: i=07 freq=2069000 inversion 1

fe_zigzag: i=08 freq=2073000 inversion 0

fe_zigzag: i=08 freq=2073000 inversion 1

fe_zigzag: i=09 freq=2068500 inversion 0

fe_zigzag: i=09 freq=2068500 inversion 1

fe_zigzag: i=10 freq=2073500 inversion 0

fe_zigzag: i=10 freq=2073500 inversion 1

disable continuous tone

(0)commited command sent

enable continuous tone

VIDEO_PLAY / VIDEO_CONTINUE, state 0 0

xp0_clk_start

xp0_clk_stop

VIDEO_STOP, state 1

disable continuous tone

(0)commited command sent

enable continuous tone

VIDEO_PLAY / VIDEO_CONTINUE, state 0 0

xp0_clk_start

xp0_clk_stop

VIDEO_STOP, state 1

disable continuous tone

(0)commited command sent

enable continuous tone

VIDEO_PLAY / VIDEO_CONTINUE, state 0 0

xp0_clk_start

xp0_clk_stop

VIDEO_STOP, state 1

disable continuous tone

(0)commited command sent

enable continuous tone

VIDEO_PLAY / VIDEO_CONTINUE, state 0 3

xp0_clk_start

xp0_clk_stop

VIDEO_STOP, state 1

disable continuous tone

(0)commited command sent

enable continuous tone

VIDEO_PLAY / VIDEO_CONTINUE, state 0 3

xp0_clk_start

usb.c: USB disconnect on device ocp-1 address 2

hub.c: new USB device ocp-1, assigned address 3

WARNING: USB Mass Storage data integrity not assured

USB Mass Storage device found at 3

dmxdev: buffer overflow free: 82 len: 422

usb.c: USB disconnect on device ocp-1 address 3

hub.c: new USB device ocp-1, assigned address 4

WARNING: USB Mass Storage data integrity not assured

USB Mass Storage device found at 4

VFS: Disk change detected on device 08:00

sda : READ CAPACITY failed.

sda : status = 1, message = 00, host = 0, driver = 08

Info fld=0x0, Current sd00:00: sns = f0 2

ASC=3a ASCQ= 0

Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a

0x00 0x00 0x00 0x00 0x00

sda : block size assumed to be 512 bytes, disk size 1GB.

sda: Write Protect is off

/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0

I/O error: dev 08:00, sector 0

VFS: Disk change detected on device 08:00

sda : READ CAPACITY failed.

sda : status = 1, message = 00, host = 0, driver = 08

Info fld=0x0, Current sd00:00: sns = f0 2

ASC=3a ASCQ= 0

Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a

0x00 0x00 0x00 0x00 0x00

sda : block size assumed to be 512 bytes, disk size 1GB.

sda: Write Protect is off

/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0

I/O error: dev 08:00, sector 0

VFS: Disk change detected on device 08:00

sda : READ CAPACITY failed.

sda : status = 1, message = 00, host = 0, driver = 08

Info fld=0x0, Current sd00:00: sns = f0 2

ASC=3a ASCQ= 0

Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a

0x00 0x00 0x00 0x00 0x00

sda : block size assumed to be 512 bytes, disk size 1GB.

sda: Write Protect is off

/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0

I/O error: dev 08:00, sector 0

VFS: Disk change detected on device 08:00

sda : READ CAPACITY failed.

sda : status = 1, message = 00, host = 0, driver = 08

Info fld=0x0, Current sd00:00: sns = f0 2

ASC=3a ASCQ= 0

Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a

0x00 0x00 0x00 0x00 0x00

sda : block size assumed to be 512 bytes, disk size 1GB.

sda: Write Protect is off

/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0

I/O error: dev 08:00, sector 0

VFS: Disk change detected on device 08:00

sda : READ CAPACITY failed.

sda : status = 1, message = 00, host = 0, driver = 08

Info fld=0x0, Current sd00:00: sns = f0 2

ASC=3a ASCQ= 0

Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a

0x00 0x00 0x00 0x00 0x00

sda : block size assumed to be 512 bytes, disk size 1GB.

sda: Write Protect is off

/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0

I/O error: dev 08:00, sector 0

VFS: Disk change detected on device 08:00

sda : READ CAPACITY failed.

sda : status = 1, message = 00, host = 0, driver = 08

Info fld=0x0, Current sd00:00: sns = f0 2

ASC=3a ASCQ= 0

Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a

0x00 0x00 0x00 0x00 0x00

sda : block size assumed to be 512 bytes, disk size 1GB.

sda: Write Protect is off

/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0

I/O error: dev 08:00, sector 0

VFS: Disk change detected on device 08:00

sda : READ CAPACITY failed.

sda : status = 1, message = 00, host = 0, driver = 08

Info fld=0x0, Current sd00:00: sns = f0 2

ASC=3a ASCQ= 0

Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a

0x00 0x00 0x00 0x00 0x00

sda : block size assumed to be 512 bytes, disk size 1GB.

sda: Write Protect is off

/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0

I/O error: dev 08:00, sector 0

VFS: Disk change detected on device 08:00

sda : READ CAPACITY failed.

sda : status = 1, message = 00, host = 0, driver = 08

Info fld=0x0, Current sd00:00: sns = f0 2

ASC=3a ASCQ= 0

Raw sense data:0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a

0x00 0x00 0x00 0x00 0x00

sda : block size assumed to be 512 bytes, disk size 1GB.

sda: Write Protect is off

/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0

I/O error: dev 08:00, sector 0

~ >

misscien dat jullie me hier verder mee kunnen helpen

 

thanks ronogogo

[Gast]

@Ronaldd

 

Is de dreambox ook usb 2.0

 

gr.

[Ronaldd]

Ronogo,

 

Kan je even het volgende commmando doen:

 

find /dec/scsi -print

 

en posten

 

Poster,

 

De usb controler is niet 2.0, maar je moet er wel 2.0 devices op aan kunnen sluiten.

 

Ronald

[rongogo]

@Ronald

 

Ik heb je commando ingegeven maar ik krijg weer die melding no such file ore directorie, nu heb ik dec in dev veranderd, en krijg ik deze output:

 

 

/dev/scsi

/dev/scsi/host0

/dev/scsi/host0/bus0

/dev/scsi/host0/bus0/target0

/dev/scsi/host0/bus0/target0/lun0

/dev/scsi/host0/bus0/target0/lun0/generic

/dev/scsi/host0/bus0/target0/lun0/disc

~ >

 

Rongogo

[Romeo_]

@rongogo,

 

doe eens gek.. tik het volgende in:

mnt dir aanmaken : mkdir /mnt

mkreiser FORMAT : mkreiserfs -f /dev/scsi/host0/bus0/target0/lun0/disc/

memorystick MOUNT : mount /dev/scsi/host0/bus0/target0/lun0/disc /mnt

 

 

[rongogo]

Dit is wat ie doet ,

 

~ > mkdir /mnt

mkdir: Cannot create directory `/mnt': File exists

~ > mkreiserfs -f /dev/scsi/host0/bus0/target0/lun0/disc/

 

<-------------mkreiserfs, 2002------------->

reiserfsprogs 3.6.3

 

/dev/scsi/host0/bus0/target0/lun0/disc is entire device, not just one partition

Continue (y/n):y

mkreiserfs: Guessing about desired format..

mkreiserfs: Kernel 2.4.20 is running.

Format 3.6 with standard journal

Count of blocks on the device: 262143

Number of blocks consumed by mkreiserfs formatting process: 8219

Blocksize: 4096

Hash function used to sort names: "r5"

Journal Size 8193 blocks (first block 18)

Journal Max transaction length 1024

inode generation number: 0

UUID: 6b8b21d4-187d-4cca-af96-4f7471a2f99a

 

bread: Cannot read a block # 0.

 

 

 

Aborted

 

rongogo

 

[Romeo_]

bread: Cannot read a block # 0

Dit is waar we ons op moeten concentreren.. je device is onleesbaar..

- Heb je nu direct een memory stick op aangesloten aan je dreambox ?

Ben benieuwd of dat werkt..

[Gast]

Er is net een image te downloaden voor een usb stick, begint nu echt leuk te worden.

[rongogo]

@ poster

 

geef me eens een hintje <img src="/ubbthreads/images/graemlins/cool.gif" alt="" />

 

 

rongogo

[bbbb]

alstublief http://projekte.ng-software.de/dreambox.html

[rongogo]

He he eindelijk gelukt <img src="/ubbthreads/images/graemlins/laugh.gif" alt="" />, ik kan mijn 6 in 1 cardreader mounten, maar op het moment alleen met een compackt flash card erin.

Met een memorie stick wil hij op het moment niet werken, weet soms iemand hoe ik andere devices kan aanspreken op mijn cardreader , ik weet dat bv: a cf is en b mmstick, of is dit nog niet mogenlijk om merdere devices aan te spreken op het momment.

 

Ik heb hem gewoon geformat en gemount met deze commando´s:

 

mnt dir aanmaken : mkdir /mnt

mkreiser FORMAT : mkreiserfs -f /dev/scsi/host0/bus0/target0/lun0/disc/

memorystick MOUNT : mount /dev/scsi/host0/bus0/target0/lun0/disc /mnt

 

Thanks to romeo

 

 

 

greets rongogo

[Romeo_]

nieuwe iets insteken in de reader -> dmesg geeft je het adres weer.

bijv in dmesg zal een regel staan met : dev/scsi/hostXXX/busYYY/targetZZZ/lunAAA/disc/

en die XXX, YYY, ZZZ, AAA kunnen per hardware verschillen

 

die nummers elke keer weer invullen bij je mount en/of format.

 

Afhankelijk van de implementatie van je reader kan het zijn dat niet alle geheugen-elementen tegelijk aan te spreken zijn (heb geen reader thuis om te testen)

[Gast]

Ik snap niet echt de bedoeling hiervan hoor. <img src="/ubbthreads/images/graemlins/confused.gif" alt="" />

Er zit toch een CF reader in de DB, dan moet Dream die maar eens aan de praat krijgen!

 

[Gast]

Ben ik mee eens we zijn al een paar dagen bezig om cf+hd aan de praat te krijgen maar nee niks.

CF is master, met de hd als slave samen is er alleen nog maar de cf over. dus het is of-of

 

Maar wil je usbstick met hd is prima geen prob.

[Romeo_]

Om nu images van de interne flash of van de Compact Flash te moeten updaten vind ik persoonlijk niet echt het spannendste.

Als een jong God nou eens een slideshow viewer als plugin wilt maken dan heeft die memory apparaten echt een toegevoegde waarde.