hdd neemt niet meer op

4 augustus 2003

Hi,

Heb een probleem met de laatst images kan niets meer opnemen op hdd.

Heb hem al xmalen geformarteerd maar tervergeefs.

Bij de vorige versie had ik het ook al maar na formarteren was dit over.

De versie's daar voor geen last.Maar als ik nu een oudere versie erin zet bijv.een van juni (ronaldd image)dan doet die het ook niet meer.

Heb bij de hdd ook al de jumpers en keer veranderd van master tot slave.

Wie heeft hier een oplossing voor

Romeo_ · 4 augustus 2003

kan je een bestand op je harddisk krijgen ?

-1- via ftp

-2- of via telnet : touch /hdd/een_file

??

4 augustus 2003

nee dit lukt ook niet meer. <img src="/ubbthreads/images/graemlins/kweetniet.gif" alt="" />

Ronaldd · 4 augustus 2003

Kan je even rebooten en direct na de reboot het commando dmesg geven via telnet.

Ronald

4 augustus 2003

heb ik gedaan en dit is het resultaat

~ > dmesg

colour dummy device 80x25wx

-rw-r--r-- 1000/

Calibrating delay loop... 251.49 BogoMIPSlrec_symbol-fs8.png unmrs.pfaange owner

Memory: 29796k available (1892k kernel code, 592k data, 92k init, 0k highme

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

cannot change owner or group: No such file

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)e/tuxbox/enigma/skins:(273) seca_emm.png 1000

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)wner or group: No such file or directory change owner or gro

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX1000/232 45272(11293) defa

PCI: Probing PCI hardware 1025(281) seca_n

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

cannot change owner or group: No such file or

Initializing RT netlink socketNo such file or

OCP uart ver 1.6.2 init complete

cannot chan

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)uch file or directory3(1261) status-big-b-left.pngt2

devfs: boot_options: 0x1

i2c-core.o: i2c core module

i2c-dev.o: i2c /dev entries driver module

/share/

cannot change

i2c-core.o: driver i2c-dev dummy driver registered. 1956(1799) status-big-b-middle.pn

i2c-proc.o version 2.6.1 (20010825)

pty: 256 Unix98 ptys configured

-rw-r--r-- 0/0 219

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en

cannot change owner or group: No such file or di

abled

/var_init:tus-big-mi

hda: Maxtor 6Y120L0, ATA DISK drive: No such file or directory00/100

Unhandled interrupt 19, disabled

canno

ide0 at 0xc307d1f8-0xc307d1ff,0xc307d1f6 on irq 25

drwxr-xr-x 0/0

hda: not ready for 48 bit yet... force 28bit LBA

cannot change owner

mplete Error }16) tmpp:

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1, sector=0

cannot change owner or group: No such f

end_request: I/O error, dev 03:00 (hda), sector 0all-left.pngirectory

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }

drwxr-xr-x 1000/232 120(120)

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=2, sector=2not change owner or group: No such file

end_request: I/O error, dev 03:00 (hda), sector 2

/var_init/emu: 421(413)

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6, sector=6e own

end_request: I/O error, dev 03:00 (hda), sector 6-r--r-- 1000/232 35(40) group owne

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1, sector=0y--r-- 1000/232 847

-rw-

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=2, sector=2

end_request: I/O error, dev 03:00 (hda), sector 2

cannot change owner or group:

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=4, sector=4--r-- 1000/232 425(233) smb.confr directoryor directoryg

end_request: I/O error, dev 03:00 (hda), sector 4

cannot cha

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }

cannot change owner or group: No s

hda: dma_intr: error=0x40 { UncorrectableEr

cannot change owner or group: No such file o

eth0: SMC91C11xFD(r:1) at 0xc3083300 IRQ:28

MEM:8192b NOWAIT:0 ADDR 00:09:34:00:1f:26rw-r

-rw-r--r-- 0/0 0

SCSI subsystem driver Revision: 1.00 -> libnss_dns-2.

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2w-r--r-- 1000/232

cannot change owner or group: No

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

cannot change owner or

cannot change

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 SoftCam.Key.3

0x00600000-0x007c0000 : "DreamBOX jffs2"roup: No

0x007c0000-0x00800000 : "DreamBOX OpenBIOS"or directory

0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)" 10

/var_init/tmp:bs

0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"ge owner or group: No such file or directoryn_yell

0x00120000-0x00600000 : "DreamBOX SquashedFS"

usb.c: registered new driver usbdevfs

cannot

-rw-r--r-

usb.c: registered new driver hubinityo such file or d

lrwxrwxrwx 0/0

usb.c: registered new driver hid 296(169) start_enigmale

hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>

hid-core.c: USB HID support driversup: No such file or directory nds

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

-rwxr-xr-x 0/0

USB Mass Storage support registered.or directory libstdc++.so.5.0.2file

mice: PS/2 mouse device common for all mice

i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 0.ange owner or group: No su

-r

i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 1toryryor director

i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 1. 19(

cannot change owner or g

NET4: Linux TCP/IP 1.0 for NET4.0.png nc -> busybox

IP Protocols: ICMP, UDP, TCP, IGMP

-rw--

IP: routing cache hash table of 512 buckets, 4KbytesoryNo such file or directory

TCP: Hash tables configured (established 2048 bind 4096)

Freeing unused kernel memory: 92k init

Warning: unable to open an initial console.not change owner or group: No such file or

fb: loadedngiseqc_0-

dummycon (0)<3>fbcon_setup: No support for fontwidth 8

fbcon_setup: type 0 (aux 0, depth 8) not supportedNo such file or directory

Console: switching to colour frame buffer device 90x36roup: No such file or directo

pfb: fb0: Pallas frame buffer device-- 0/0 22907(3522) bo

i2c-core.o: driver DreamBOX frontprocessor registered.

-rw-r--r-- 0/0 1031(286) v

i2c-core.o: client [fp] registered to adapter [iBwner or group: No

error occured: 43 0(0) fonts

incomplete xfero such file or

nacktory

event: init ...

CICCR:00800088

core: Loaded IBM STB04xxx core driver

cannot change owner or group: No su

write 1 event's ...r-- 1000/232

registering device.ng

demux: inited

xp0_clk_stop

[XP1] Init

[XP1] 896KBytes used for Queues

drwxr-xr-x 1000/232

i2c-core.o: driver stv0299 DVB demodulator registered.ctoryup: No

[CI] insert detected

i2c-core.o: client [stv0299] registered to adapter [iBM OCP IIC adapter](pos. 1)2 1425(1078) cz.png 126044(5039

.

registering frontend...

enable continuous tone

-rw-r--r-- 0/0

already got one.164) playlis

i2c-core.o: driver Mitel

i2c-core.o: driver DreamBOX AV-Switch registered.No such file or

i2c-core.o: client [avs] registered to adapter [iBM OCP IIC adapter](pos. 3).

cannot change owner or group: No such file or directory--r-- 1000/232

avs: attaching avs at 0x94 to adapter IBM OCP IIC adapter

cannot change owner or gro

error occured: 43

drwxr-

incomplete xfer 0(0)

nackskin

sdev: Loading sdev module

INT:8

enable_irq(8) unbalancedowner

INT:16-r--

enable_irq(16) unbalanceder or group: No such file

dummycon (0)<3>fbcon_setup: No support for fontwidth 8

-rw-r--r-- 1000/

ci-open

[CI] RESET-r--r-- 0/

[CI] init try #067(67) user

[DENC] set mode to RGB

[DENC] set mode to FBAS

/s

[AVS] FBLK:1nigma/pictur

set_vsw1:5annot chan

[DENC] set mode to RGB

[DENC] set mode to FBAShange owner or group: N

[AVS] FBLK:1r directorys

[AVS] FNC:2directoryrw

[DENC] disable WSS

[AVS] FNC:2

eth0:PHY remote fault detected

-rw-r--r-- 1000/2

enable ci

demux set source

VIDEO_PLAY / VIDEO_CONTINUE, state 0 0

xp0_clk_start

open id:0

driver free

card present

open id:1

driver free

card present

overriding freq

overriding ETU

open id:0

driver free

card present

open id:1

driver free

card present

[CI] read - error (no DA)

4 augustus 2003

hmm volgens mij is gewoon je hdd kapot, kun je er niet even een andere in hangen? dan kun je het even testen. Of anders even in een windows machine even opnieuw formateren als fat en dan weer terug in de dreambox. succes.

Ronaldd · 4 augustus 2003

Je output lijkt wat corrupt, waarchijnlijk een cut and paste probleem.

Kan je hem zo wegzetten:

dmesg >/tmp/qqq

en dan /tmp/qqq ophalen via ftp en atachen aan bericht.

Ronald

4 augustus 2003

Hij formarteerd hem wel maar kan er niets naar toe schrijven.

Volgens de message heb ik geen rechten als ik dit goed lees.

Ronaldd · 4 augustus 2003

Hoeft niet persee kapot te zijn, die zorgwekkende meldingen heb ik wel vaker gezien in linux met een werkende disk.

Ronald

4 augustus 2003

da), sector 2

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=4, sector=4

end_request: I/O error, dev 03:00 (hda), sector 4

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6, sector=6

end_request: I/O error, dev 03:00 (hda), sector 6

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1, sector=0

end_request: I/O error, dev 03:00 (hda), sector 0

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=2, sector=2

end_request: I/O error, dev 03:00 (hda), sector 2

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=4, sector=4

end_request: I/O error, dev 03:00 (hda), sector 4

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }

hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=6, sector=6

end_request: I/O error, dev 03:00 (hda), sector 6

unable to read partition table

loop: loaded (max 8 devices)

smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com)

eth0: SMC91C11xFD(r:1) at 0xc3083300 IRQ:28

MEM:8192b NOWAIT:0 ADDR 00:09:34:00:1f:26

SCSI subsystem driver Revision: 1.00

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

dreambox: flash mapping: 800000 at 7f800000

0: offset=0x0,size=0x20000,blocks=64

disable flash VPP

Creating 6 MTD partitions on "DreamBOX rev3+":

0x00000000-0x00600000 : "DreamBOX cramfs"

0x00600000-0x007c0000 : "DreamBOX jffs2"

0x007c0000-0x00800000 : "DreamBOX OpenBIOS"

0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"

0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"

0x00120000-0x00600000 : "DreamBOX SquashedFS"

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-ohci.c: USB OHCI at membase 0xc3888000, IRQ 18

usb-ohci.c: usb-ocp, builtin

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

usb.c: registered new driver hiddev

usb.c: registered new driver hid

hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>

hid-core.c: USB HID support drivers

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

USB Mass Storage support registered.

mice: PS/2 mouse device common for all mice

IBM On-chip iic (i2c) algorithm module 2002.30.04

iic_ibmocp_init: IBM on-chip iic adapter module

i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 0

i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 0.

i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 1

i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 1.

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (cramfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 92k init

Warning: unable to open an initial console.

fb: loaded

dummycon (0)<3>fbcon_setup: No support for fontwidth 8

fbcon_setup: type 0 (aux 0, depth 8) not supported

Console: switching to colour frame buffer device 90x36

pfb: fb0: Pallas frame buffer device

i2c-core.o: driver DreamBOX frontprocessor registered.

i2c-core.o: client [fp] registered to adapter [iBM OCP IIC adapter](pos. 0).

fp: attaching fp at 0xee to adapter IBM OCP IIC adapter

error occured: 43

incomplete xfer

nack

event: init ...

CICCR:00800088

core: Loaded IBM STB04xxx core driver

write 1 event's ...

registering device.

demux: inited

xp0_clk_stop

[XP1] Init

[XP1] 896KBytes used for Queues

i2c-core.o: driver stv0299 DVB demodulator registered.

[CI] insert detected

i2c-core.o: client [stv0299] registered to adapter [iBM OCP IIC adapter](pos. 1).

registering frontend...

enable continuous tone

already got one.

i2c-core.o: driver Mitel tuner driver registered.

i2c-core.o: client [Dreambox Tuner Driver] registered to adapter [iBM OCP IIC adapter](pos. 2).

lcd.o: LCD driver (KS0713) module

i2c-core.o: driver DreamBOX AV-Switch registered.

i2c-core.o: client [avs] registered to adapter [iBM OCP IIC adapter](pos. 3).

avs: attaching avs at 0x94 to adapter IBM OCP IIC adapter

error occured: 43

incomplete xfer

nack

sdev: Loading sdev module

INT:8

enable_irq(8) unbalanced

INT:16

enable_irq(16) unbalanced

dummycon (0)<3>fbcon_setup: No support for fontwidth 8

fbcon_setup: type 0 (aux 0, depth 8) not supported

set event: 00000049

ci-open

[CI] RESET

[CI] init try #0

[DENC] set mode to RGB

[DENC] set mode to FBAS

[AVS] FBLK:1

set_vsw1:5

[DENC] set mode to RGB

[DENC] set mode to FBAS

[AVS] FBLK:1

[AVS] FNC:2

[DENC] disable WSS

[AVS] FNC:2

eth0:PHY remote fault detected

disable continuous tone

(0)commited command sent

[CI] Init complete after 1 tries

(0)commited command sent

enable continuous tone

enable ci

demux set source

VIDEO_PLAY / VIDEO_CONTINUE, state 0 0

xp0_clk_start

open id:0

driver free

card present

open id:1

driver free

card present

overriding freq

overriding ETU

open id:0

driver free

card present

open id:1

driver free

card present

[CI] read - error (no DA)

dmxdev: buffer overflow free: 64 len: 728

[CI] read - error (no DA)

373533-qqq.txt

Ronaldd · 4 augustus 2003

Het lijkt dat de partitie tabel corrupt is. Dat zou enigma moeten repareren. Doe eens

sfdisk -l

via telnet en resultaat posten

4 augustus 2003

het volgende heb ik als resultaat.

~ > sfdisk -l

Disk /dev/ide/host0/bus0/target0/lun0/disc: 238216 cylinders, 16 heads, 63 secto

rs/track

read: Input/output error

sfdisk: read error on /dev/ide/host0/bus0/target0/lun0/disc - cannot read sector

0

/dev/ide/host0/bus0/target0/lun0/disc: unrecognized partition

No partitions found

Ronaldd · 4 augustus 2003

Ik ben bang dat ik me by de diagnose van rdigital moet aansluiten. Of je hdd is stuk of alleen de eerste sector is beschadigd. Als alleen je eerste sector stuk is dan zou je een 'low level format' kunnen doen vanuit de bios van een PC. Naar mijn weten hebben moderne IDE disken, net als scsi disken, de mogelijkheid bad sectors te 'remappen'

Ronald

4 augustus 2003

In ieder geval bedankt.

Ga morgen de hdd eruit halen en formateren via de PC en probeer het dan weer.

Zal de resultaat wel posten.

25 augustus 2003

FF een update over mijn hdd.

Nou heeft ff geduurt maar ik kan jullie melden dat de hdd nu echt is overleden want pc ziet hem ook niet.

Heb hem nog wel ff gezien maar na 1 dag draaiende in de pc doet hij het niet meer heb hem ook nog terug gezet in DB maar die loopt dan gelijk vast.

Heb er nu maar een 40G maxtor ingezet had ik nog liggen werkt zelfs nog beter.

Inloggen

hdd neemt niet meer op

Aanbevolen berichten

Gast

Romeo_

Gast

Ronaldd

Gast

Gast

Ronaldd

Gast

Ronaldd

Gast

Ronaldd

Gast

Ronaldd

Gast

Gast

Maak een account aan of log in om te reageren

Account aanmaken

Inloggen

Wie is er online 0 leden

Overig

Activiteit