station_hendrik Geplaatst: 21 september 2003 Geplaatst: 21 september 2003 Hoi, Heb het volgende probleem. De Dreambox start niet meer juist op als ik er een andere image in wil zetten. Ik wil graag de Ronaldd image erin hebben, maar het gaat nog steeds niet. Ik heb DreamUP gebruik om de image te vervangen. Als ie bijna klaar is dan krijg ik "Flas copy failed! result: -1"te zien. Toch maar OK gedrukt. Daarna start ie op en blijft de box op dream multimedia op display hangen. Daarna met hyperterminal het dit op het goede moment neergezet --> console=ttyS0,115200 root=/dev/mtdblock/0 Het onderstaande is de uitkomst hiervan. Kan iemand me helpen uitleggen wat ik nu moet doen? Dreambox DM7000 loaded at: 00500000 006121F8 relocated to: 00400000 005121F8 board data at: 0050F128 0050F168 relocated to: 00404BEC 00404C2C zimage at: 00405128 0050EEE9 avail ram: 00513000 02000000 Linux/PPC load: console=null root=/dev/mtdblock0 ro rootfstype=cramfs console=tt yS0,115200 root=/dev/mtdblock/0 Uncompressing Linux...done. Now booting the kernel Linux version 2.4.20 (ghost@client) (gcc version 3.2.1) #1 Mon Jun 9 01:38:12 CE ST 2003 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=null root=/dev/mtdblock0 ro rootfstype=cramfs conso le=ttyS0,115200 root=/dev/mtdblock/0 Console: colour dummy device 80x25 Calibrating delay loop... 251.49 BogoMIPS Memory: 29796k available (1892k kernel code, 592k data, 92k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket OCP uart ver 1.6.2 init complete Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. © 2001 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-proc.o version 2.6.1 (20010825) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at 0xe0040000 (irq = 20) is a 16550A ttyS01 at 0xe0000000 (irq = 21) is a 16550A ttyS02 at 0xe00e0000 (irq = 31) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx IBM IDE ocp driver version 2.2 ide_redwood: waiting for drive ready......Drive spun up loop: loaded (max 8 devices) smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com) eth0: SMC91C11xFD(r:1) at 0xc3081300 IRQ:28 MEM:8192b NOWAIT:0 ADDR 00:09:34:0f:7c:51 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 dreambox: flash mapping: 800000 at 7f800000 disable flash VPP Creating 6 MTD partitions on "DreamBOX rev3+": 0x00000000-0x00600000 : "DreamBOX cramfs" 0x00600000-0x007c0000 : "DreamBOX jffs2" 0x007c0000-0x00800000 : "DreamBOX OpenBIOS" 0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)" 0x00000000-0x00800000 : "DreamBOX (w/ bootloader)" 0x00120000-0x00600000 : "DreamBOX SquashedFS" usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xc3886000, IRQ 18 usb-ohci.c: usb-ocp, builtin usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice IBM On-chip iic (i2c) algorithm module 2002.30.04 iic_ibmocp_init: IBM on-chip iic adapter module i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 0 i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 0. i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 1 i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 1. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 92k init init started: BusyBox v1.00-pre3 (2003.09.18-21:08+0000) multi-call binary Using /lib/modules/2.4.20/misc/fb.o fb: loaded dummycon (0)<3>fbcon_setup: No support for fontwidth 8 fbcon_setup: type 0 (aux 0, depth 8) not supported Console: switching to colour frame buffer device 90x36 pfb: fb0: Pallas frame buffer device Using /lib/modules/2.4.20/misc/dream.o i2c-core.o: driver DreamBOX frontprocessor registered. i2c-core.o: client [fp] registered to adapter [iBM OCP IIC adapter](pos. 0). fp: attaching fp at 0xee to adapter IBM OCP IIC adapter error occured: 43 incomplete xfer nack event: init ... CICCR:00800088 core: Loaded IBM STB04xxx core driver write 1 event's ... registering device. demux: inited xp0_clk_stop [XP1] Init [XP1] 896KBytes used for Queues i2c-core.o: driver stv0299 DVB demodulator registered. i2c-core.o: client [stv0299] registered to adapter [iBM OCP IIC adapter](pos. 1) . registering frontend... enable continuous tone already got one. i2c-core.o: driver Mitel tuner driver registered. i2c-core.o: client [Dreambox Tuner Driver] registered to adapter [iBM OCP IIC ad apter](pos. 2). lcd.o: LCD driver (KS0713) module Using /lib/modules/2.4.20/misc/avs.o Warning: loading avs will taint i2c-core.o: driver DreamBOX AV-Switch registered . the kernel: non-i2c-core.o: client [avs] registered to adapter [iBM OCP IIC adap ter](pos. 3). GPL license - pravs: attaching avs at 0x94 oprietary Seeto adapter IBM OCP IIC adapter http://www.tux.error occured: 43 org/lkml/#exportincomplete xfer -tainted for infnack ormation about tainted modules BusyBox v1.00-pre3 (2003.09.18-21:08+0000) multi-call binary Compiled by Ronaldd Usage: busybox [function] [arguments]... or: [function] [arguments]... BusyBox is a multi-call binary that combines many common Unix utilities into a single executable. Most people will create a link to busybox for each function they wish to use, and BusyBox will act like whatever it was invoked as. Currently defined functions: [, adjtimex, ash, awk, basename, bunzip2, busybox, bzcat, cat, chgrp, chmod, chown, chroot, clear, cmp, cp, jffs2_scan_eraseblock(): Ma gic bitmask 0x1985 not found at 0x0000001c: 0xffff instead crond, crontab, jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000 00020: 0x7f7d instead cut, date, dd,jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00 000024: 0xffa7 instead df, dirname, dmjffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000 00028: 0xffcc instead esg, dos2unix, djffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000 0002c: 0xff6c instead u, echo, egrep, jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000 00030: 0xfa19 instead env, expr, faljffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00 000034: 0xff8c instead se, fgrep, find,jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000 00038: 0xffa8 instead free, grep, gunjffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000 0003c: 0xffdc instead zip, gzip, halt,jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000 00040: 0xdf9b instead head, hostnamFurther such events for this erase block will not be printed e, id, ifconfig, init, insmod, kill, killall, klogd, ln, logger, ls, lsmod, mesg, mkdir, mknod, mkswap, modprobe, more, mount, mv, netstat, nslookup, pidof, ping, poweroff, printf, ps, pwd, rdate, readlink, reboot, reset, rm, rmdir, rmmod, route, sed, sh, sleep, sort, strings, stty, swapoff, swapon, sync, syslogd, tail, tar, tee, telnet, test, time, top, touch, tr, traceroute, true, tty, udhcpc, umount, uname, uniq, unix2dos, uptime, usleep, vi, wc, wget, which, whoami, xargs, yes, zcat JFFS2: Erase block at 0x00000000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020020: 0xfffd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0xfff7 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020028: 0xffce in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002002c: 0xfffc in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020030: 0xff5b in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020034: 0xffce in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020038: 0xfffa in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002003c: 0xfffc in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020040: 0xdfff in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x00020000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0xfffd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0xfff7 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040028: 0xffcc in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004002c: 0xfffc in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040030: 0xff5b in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040034: 0xffce in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040038: 0xffba in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004003c: 0xfffc in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040040: 0xdfff in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x00040000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060020: 0xfffd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060024: 0xfff7 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060028: 0xffce in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006002c: 0xfffc in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060030: 0xff5b in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060034: 0xffce in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060038: 0xfffa in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006003c: 0xfffc in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060040: 0xdfff in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x00060000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0xffec in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0xfff7 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080028: 0xffdf in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008002c: 0xffed in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080030: 0xff4f in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080034: 0xffda in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080038: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008003c: 0xfffd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080040: 0xdfdf in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x00080000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0020: 0xffec in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0024: 0xfff7 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0028: 0xffdf in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a002c: 0xff6d in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0030: 0xff4f in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0034: 0xffda in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0038: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a003c: 0xfffd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0040: 0xdfdf in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x000a0000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0020: 0xffec in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0024: 0xfff7 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0028: 0xffdf in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c002c: 0xff6d in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0030: 0xff4f in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0034: 0xffda in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0038: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c003c: 0xfffd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0040: 0xdfdf in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x000c0000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0020: 0xffec in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0024: 0xfff7 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0028: 0xffdf in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e002c: 0xffed in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0030: 0xff4f in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0034: 0xffda in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0038: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e003c: 0xfffd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0040: 0xdfdf in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x000e0000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100020: 0xffee in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100024: 0xfff5 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100028: 0xffdd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010002c: 0xff47 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100030: 0xffe7 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100034: 0xffd2 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100038: 0xfffd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010003c: 0xffdf in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100040: 0xffff in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x00100000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120020: 0xffee in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120024: 0xfff5 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120028: 0xffdd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012002c: 0xff67 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120030: 0xffe7 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120034: 0xffda in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120038: 0xfdfd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012003c: 0xffdf in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120040: 0xffff in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x00120000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140020: 0xffee in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140024: 0xfff5 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140028: 0xffdc in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014002c: 0xff67 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140030: 0xffe7 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140034: 0xffda in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140038: 0xfffd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014003c: 0xffdf in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140040: 0xffff in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x00140000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160020: 0xffee in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160024: 0xfff5 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160028: 0xffdc in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016002c: 0xff47 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160030: 0xffe7 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160034: 0xffda in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160038: 0xfffd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016003c: 0xffdf in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160040: 0xffff in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x00160000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180020: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180024: 0xfff5 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180028: 0xffdd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018002c: 0xff76 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180030: 0xffe6 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180034: 0xffd6 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180038: 0xffbd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018003c: 0xffdb in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180040: 0xfff7 in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x00180000 is not formatted. It will be erased jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a001c: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0020: 0xffff in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0024: 0xfff5 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0028: 0xffdd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a002c: 0xff56 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0030: 0xffe6 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0034: 0xffd6 in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0038: 0xfffd in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a003c: 0xffdb in stead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0040: 0xffff in stead Further such events for this erase block will not be printed JFFS2: Erase block at 0x001a0000 is not formatted. It will be erased Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes mount: Mounting /dev/mtdblock/1 on /var failed: Invalid argument cp: cannot create directory `/var/etc': Read-only file system cp: cannot create directory `/var/tmp': Read-only file system cp: cannot create directory `/var/tuxbox/config/enigma': Read-only file system cp: unable to open `/var/tuxbox/config/satellites.xml': Read-only file system cp: unable to open `/var/tuxbox/config/scart.conf': Read-only file system cp: cannot create directory `/var/tuxbox/config/tuxtxt': Read-only file system cp: unable to preserve times of `/var/tuxbox/config': Read-only file system cp: unable to preserve ownership of `/var/tuxbox/config': Read-only file system cp: unable to preserve permissions of `/var/tuxbox/config': Read-only file syste m cp: cannot create directory `/var/tuxbox/plugins': Read-only file system cp: unable to open `/var/tuxbox/start_enigma': Read-only file system cp: unable to preserve times of `/var/tuxbox': Read-only file system cp: unable to preserve times of `/var/tuxbox': Read-only file system cp: unable to preserve permissions of `/var/tuxbox': Read-only file system mount: Mounting none on /var/tmp failed: No such file or directory cd: 36: can't cd to /var/tmp mount: Mounting /dev/ide/host0/bus0/target0/lun0/part1 on /hdd failed: No such f ile or directory /dev/ide/host0/bus0/target0/lun0/disc: No such file or directory /dev/ide/host0/bus0/target0/lun0/disc: No such file or directory /etc/init.d/rcS: 46: /bin/smbd: not found /etc/init.d/rcS: 47: /bin/nmbd: not found Error -3 while decompressing! c025d6f8(-9934871)->c1ca8000(4096) touch: /tmp/.enigma: Read-only file system Please press Entfbcon_setup: No support for fontwidth 8 er to activate tfbcon_setup: type 0 (aux 0, depth 8) not supported his console. fbcon_setup: No support for fontwidth 8 fbcon_setup: type 0 (aux 0, depth 8) not supported fbcon_setup: No support for fontwidth 8 fbcon_setup: type 0 (aux 0, depth 8) not supported fbcon_setup: No support for fontwidth 8 fbcon_setup: type 0 (aux 0, depth 8) not supported fbcon_setup: No support for fontwidth 8 fbcon_setup: type 0 (aux 0, depth 8) not supported --> Windows logica: Afsluiten onder Start
Ronaldd Geplaatst: 21 september 2003 Geplaatst: 21 september 2003 Je hebt hetzelfde probleem als hier dus dreambox even weer opstarten zoals hierboven (met log messages) en dan op enter drukken en dit commando geven: eraseall /dev/mtd/1 Dan reboten en je box zou wer moeten werken. Ik wil wel graag weten welke image je hiervoor draaide. Ik vind het nl zeer raar dat minimaal 2 mensen een corrupt /var filesysteem hebben. Ronald My DM(800|7025) is Ronaldd powered
Ron Geplaatst: 21 september 2003 Geplaatst: 21 september 2003 Doet de erase functie in Dreamup 2.14b niet exact hetzelfde? Tox.
station_hendrik Geplaatst: 21 september 2003 Auteur Geplaatst: 21 september 2003 OK had ik al gedaan. Is toen netjes naar 100% gegaan. Hierna ge-reboot. Is nog steeds hetzelfde. De box blijft hangen bij Dream Multimedia 1.05 De log als hierboven is de uitkomst ervan. Dus ik word er niet vrolijker van <img src="/ubbthreads/images/graemlins/frown.gif" alt="" /> Ik ben er al vanaf gisteren mee bezig. Toen ook het topic van duckface.nl gevolgd. In ieder geval ging het bij mij mis toen ik van Jirkas over wou stappen naar de Ronaldd image. Dat ging helemaal niet. De enige die erin wil is de software van Traveller. Verders lukt het niet. Zal wel iets verkeerd doen. <img src="/ubbthreads/images/graemlins/grin.gif" alt="" /> Verder vind ik het vreemd dat bij DreamUP steeds de melding "Flash copy failed: result -1" krijg al er bijna na moeite een nieuwe image in staat. Is de flash niet gewoon suk ofzo?? @ toxic[Q] De erase functie in dreamup 2.14b heb ik ook al diverse malen geprobeerd. Echter heeft het mijn probleeem niet verholpen <img src="/ubbthreads/images/graemlins/smirk.gif" alt="" /> --> Windows logica: Afsluiten onder Start
droopy Geplaatst: 21 september 2003 Geplaatst: 21 september 2003 Citaat: Je hebt hetzelfde probleem als hier dus dreambox even weer opstarten zoals hierboven (met log messages) en dan op enter drukken en dit commando geven: eraseall /dev/mtd/1 Dan reboten en je box zou wer moeten werken. Ik wil wel graag weten welke image je hiervoor draaide. Ik vind het nl zeer raar dat minimaal 2 mensen een corrupt /var filesysteem hebben. Ronald Ik heb volgens mij hetzelfde probleem en ik draaide jirkas van 14-09. Daarvoor Ronald en geen enkel probleem. Nu kan ik allen mijn laatste backup (gelukkig!) flashen
Ronaldd Geplaatst: 21 september 2003 Geplaatst: 21 september 2003 Tox, ik vermoed dat de erase van dreamup alleen cramfs leeg maakt en niet /var, maar ik kan me vegissen ik gebruik dreamup niet vaak. station_X, Kan je als je in console zit even beide mtd devices erasen: eraseall /dev/mtd/0 eraseall /dev/mtd/1 Ga niet hoger dan device 1 andere devices zijn gevaarlijk. Daarna moet je weer een image flashen. Ik wil graag weten of de erase van 0 nog fouten geeft die dreamup niet laat zien. All, Kan iemand die nog steeds jirkas 14-09 draait even dezelfde log messages als boven posten, ik wil even het een en ander checken. Ronald. My DM(800|7025) is Ronaldd powered
station_hendrik Geplaatst: 21 september 2003 Auteur Geplaatst: 21 september 2003 Bedankt voor de antwoorden. Heb net even die boel geerased.. Hieronder zie je het resultaat. Het lijkt geen fouten te geven. Nu heb ik voor de zekerheid de image nog een keer gedownload en van gamesquad en gelijk de boel weer geflashed met DreamUP. Aan het eind weer de melding "Flash copy failed! result: -1" . Dus blijft het display alleen nog maar Dream Multimedia vertonen en boot de box NIET meer door. Dit onderstaande heb ik effe neergezet om te controleren of de erase van 0 en 1 nog fouten heeft. Dreambox DM7000 loaded at: 00500000 006121F8 relocated to: 00400000 005121F8 board data at: 0050F128 0050F168 relocated to: 00404BEC 00404C2C zimage at: 00405128 0050EEE9 avail ram: 00513000 02000000 Linux/PPC load: console=null root=/dev/mtdblock0 ro rootfstype=cramfs console=tt yS0,115200 root=/dev/mtdblock/0 Uncompressing Linux...done. Now booting the kernel Linux version 2.4.20 (ghost@client) (gcc version 3.2.1) #1 Mon Jun 9 01:38:12 CE ST 2003 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=null root=/dev/mtdblock0 ro rootfstype=cramfs conso le=ttyS0,115200 root=/dev/mtdblock/0 Console: colour dummy device 80x25 Calibrating delay loop... 251.49 BogoMIPS Memory: 29796k available (1892k kernel code, 592k data, 92k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket OCP uart ver 1.6.2 init complete Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. © 2001 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-proc.o version 2.6.1 (20010825) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at 0xe0040000 (irq = 20) is a 16550A ttyS01 at 0xe0000000 (irq = 21) is a 16550A ttyS02 at 0xe00e0000 (irq = 31) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx IBM IDE ocp driver version 2.2 ide_redwood: waiting for drive ready......Drive spun up loop: loaded (max 8 devices) smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com) eth0: SMC91C11xFD(r:1) at 0xc3081300 IRQ:28 MEM:8192b NOWAIT:0 ADDR 00:09:34:0f:7c:51 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 dreambox: flash mapping: 800000 at 7f800000 disable flash VPP Creating 6 MTD partitions on "DreamBOX rev3+": 0x00000000-0x00600000 : "DreamBOX cramfs" 0x00600000-0x007c0000 : "DreamBOX jffs2" 0x007c0000-0x00800000 : "DreamBOX OpenBIOS" 0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)" 0x00000000-0x00800000 : "DreamBOX (w/ bootloader)" 0x00120000-0x00600000 : "DreamBOX SquashedFS" usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xc3886000, IRQ 18 usb-ohci.c: usb-ocp, builtin usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice IBM On-chip iic (i2c) algorithm module 2002.30.04 iic_ibmocp_init: IBM on-chip iic adapter module i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 0 i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 0. i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 1 i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 1. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 92k init init started: BusyBox v0.60.5 (2003.03.08-01:32+0000) multi-call binary Using /lib/modules/2.4.20/misc/fb.o Warning: loading fb will taint tfb: loaded he kernel: forcedummycon (0)d load See ht<3>fbcon_setup: No support for fontwidth 8 <a href="tp://www.tux.orgfbcon_setup:" target="_blank">tp://www.tux.orgfbcon_setup:</a> type 0 (aux 0, depth 8) not supported /lkml/#export-tainted for information about tainted modules Console: switching to colour frame buffer device 90x36 pfb: fb0: Pallas frame buffer device Using /lib/modules/2.4.20/misc/sdev.o Warning: loadingsdev: Loading sdev module sdev will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modu les Using /lib/modules/2.4.20/misc/dream.o Warning: loading dream will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modu les i2c-core.o: driver DreamBOX frontprocessor registered. i2c-core.o: client [fp] registered to adapter [iBM OCP IIC adapter](pos. 0). fp: attaching fp at 0xee to adapter IBM OCP IIC adapter error occured: 43 incomplete xfer nack event: init ... CICCR:00800088 core: Loaded IBM STB04xxx core driver write 1 event's ... registering device. demux: inited xp0_clk_stop [XP1] Init [XP1] 896KBytes used for Queues i2c-core.o: driver stv0299 DVB demodulator registered. i2c-core.o: client [stv0299] registered to adapter [iBM OCP IIC adapter](pos. 1) . registering frontend... enable continuous tone already got one. i2c-core.o: driver Mitel tuner driver registered. i2c-core.o: client [Dreambox Tuner Driver] registered to adapter [iBM OCP IIC ad apter](pos. 2). lcd.o: LCD driver (KS0713) module Using /lib/modules/2.4.20/misc/avs.o Warning: loading avs will taint i2c-core.o: driver DreamBOX AV-Switch registered . the kernel: non-i2c-core.o: client [avs] registered to adapter [iBM OCP IIC adap ter](pos. 3). GPL license - pravs: attaching avs at 0x94 oprietary Seeto adapter IBM OCP IIC adapter http://www.tux.error occured: 43 org/lkml/#exportincomplete xfer -tainted for infnack ormation about tainted modules Warning: loading avs will taint the kernel: forced load Using /lib/modules/2.4.20/misc/ca.o Warning: loading ca will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modu les Using /lib/modules/2.4.20/misc/sci_drv.o Warning: loading sci_drv will taint the kernel: no license SeINT:8 e http://www.tuxenable_irq(8) unbalanced .org/lkml/#exporINT:16 t-tainted for inenable_irq(16) unbalanced formation about tainted modules Warning: loading sci_drv will taint the kernel: forced load Using /lib/modules/2.4.20/misc/fb.o Warning: loading fb will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modu les insmod: A module named fb already exists Using /lib/modules/2.4.20/misc/sdev.o Warning: loading sdev will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modu les insmod: A module named sdev already exists Using /lib/modules/2.4.20/misc/dream.o Warning: loading dream will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modu les insmod: A module named dream already exists Using /lib/modules/2.4.20/misc/avs.o Warning: loading avs will taint the kernel: non-GPL license - proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modu les Warning: loading avs will taint the kernel: forced load insmod: A module named avs already exists Using /lib/modules/2.4.20/misc/ca.o Warning: loading ca will taint the kernel: forced load See http://www.tux.org/lkml/#export-tainted for information about tainted modu les insmod: A module named ca already exists Using /lib/modules/2.4.20/misc/sci_drv.o Warning: loading sci_drv will taint the kernel: no license See http://www.tux.org/lkml/#export-tainted for information about tainted modu les Warning: loading sci_drv will taint the kernel: forced load insmod: A module named sci_drv already exists Uncompressing Enigma... /dev/ide/host0/bus0/target0/lun0/disc: No such file or directory /dev/ide/host0/bus0/target0/lun0/disc: No such file or directory mount: Mounting /dev/ide/host0/bus0/target0/lun0/part1 on /hdd failed: No such f ile or directory /etc/init.d/rcS: /bin/smbd: No such file or directory /etc/init.d/rcS: /bin/nmbd: No such file or directory cp: /var/tmp/core*: No such file or directory Please press Enter to activate this console. Please press Enter to activate this console. BusyBox v0.60.5 (2003.03.08-01:32+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. / > eraseall /dev/mtd/0 Erased 6144 Kibyte @ 0 -- 100% complete. / > eraseall /dev/mtd/1 Erased 1792 Kibyte @ 0 -- 100% complete. / > --> Windows logica: Afsluiten onder Start
Ronaldd Geplaatst: 22 september 2003 Geplaatst: 22 september 2003 Ik denk dat je het beste een support call kan aanmaken bij dream multimedia NL. Ik kan hier weinig meer aan toevoegen. Ronald My DM(800|7025) is Ronaldd powered
station_hendrik Geplaatst: 23 september 2003 Auteur Geplaatst: 23 september 2003 @Ronaldd Gisteren heb ik Jirkas er weer opgezet. Dit ging zonder fout meldingen of problemen. Kan ik ook op een andere manier firmware in de Dreambox zetten bijvoorbeeld met FTP?? <img src="/ubbthreads/images/graemlins/confused.gif" alt="" /> In ieder geval hoef ik dan geen DreamUP meer te gebruiken. Groeten, --> Windows logica: Afsluiten onder Start
Gast Geplaatst: 23 september 2003 Geplaatst: 23 september 2003 Ja dat kan de image renamen naar root.cramfs, en dan met ftp naar /var/tmp. In menu update manuel kiezen, dat is alles. gr.
droopy Geplaatst: 23 september 2003 Geplaatst: 23 september 2003 Citaat: Ja dat kan de image renamen naar root.cramfs, en dan met ftp naar /var/tmp. In menu update manuel kiezen, dat is alles. gr. Ook dit werkte niet bij mij Ik heb hyperterminal mee laten lopen en ik hoop dat er iemand wijs uit kan handle_spdu() handle_spdu() enable ci demux set source handle_spdu() killall: nmbd: no process killed /bin/nmbd: No such file or directory enable pvr demux set source disable pvr demux set source (0)commited command sent (0)commited command sent (0)commited command sent (0)commited command sent enable continuous tone VIDEO_PLAY / VIDEO_CONTINUE, state 0 0 xp0_clk_start camd, v2.2alpha1 project Radegast [noEMM version] © 2k3 kindzadza Loading config file /var/etc/radegast.cfg Fast PMT mode is ON. LocECM : Connection accepted. Reading and analyzing PAT ... Program number: 0 PMT pid: Analyzing PMT: (PID = 10) Found seca id 0080 Found seca id 0084 Found seca id 0086 Found cw Found viaccess id 7800 Found viaccess id 8000 Found seca id 0080 Found seca id 0084 Found seca id 0086 Found cw Found viaccess id 7800 Language = fre Found viaccess id 8000 Found seca id 0080 Found seca id 0084 Found seca id 0086 Found cw Found viaccess id 7800 Language = eng Found viaccess id 8000 Try system Viaccess id 8000 ecm 633 LocECM : input:open id:0 CMD: 1 len: 64 open id:0 (40) 02 01 05 driver free 06 08 30 30 30 3ca 0 38 30 30 30 07ioctl set special mode to 0 04 30 30 30 30 03 2b d2 01 01 ee 6e 7e 92 7e 1f 2c d1 5b 6f 30 2f 8f 54 ab fb f 8 81 8c 19 c8 59 43 ef 31 91 23 d2 4d 5a 62 10 9open id:1 d 76 d8 32 b0 19open id:1 80 b6 LocECM driver free : CMD_KEY_ASK: card present size: 64 (real: ioctl set special mode to 0 64) LocECM : provid: 8000, keynr: 00 ecmdata: 1 SoftCA : Invoked ... CR: unable to read ATR header CR: unable to read ATR header LocalECM: VIACCESS decoding ... DEB: key: 8BE3AA259E563833 LocECM : Key OK. Correct key found LocECM : DW OK sent. [CI] write - error FR 2! (status:00) disable ci demux set source [CI] RESET [CI] init try #0 [CI] Init complete after 1 tries handle_spdu() handle_spdu() handle_spdu() handle_spdu() handle_spdu() handle_spdu() enable ci demux set source handle_spdu() LocECM : input:open id:0 CMD: 1 len: 64 open id:0 (40) 02 01 05 driver free 06 08 30 30 30 3card present 0 38 30 30 30 07ioctl set special mode to 0 04 30 30 30 30 03 2b d2 01 01 ee 6e 7e 92 7e 1f 2c d1 5b 6f 30 2f ce 9d 73 ba b 8 d5 9c 2c 49 fc c7 ea 90 34 86 f3 4d 5a 40 d6 fopen id:1 5 d6 c8 14 fe bdopen id:1 80 b6 LocECM driver free : CMD_KEY_ASK: card present size: 64 (real: ioctl set special mode to 0 64) LocECM : provid: 8000, keynr: 00 ecmdata: 1 SoftCA : Invoked ... CR: unable to read ATR header CR: unable to read ATR header LocalECM: VIACCESS decoding ... DEB: key: 8BE3AA259E563833 LocECM : Key OK. LocECM : DW OK sent. [CI] write - error FR 2! (status:00) disable ci demux set source [CI] RESET [CI] init try #0 [CI] Init complete after 1 tries handle_spdu() handle_spdu() handle_spdu() handle_spdu() handle_spdu() handle_spdu() enable ci demux set source handle_spdu() [CI] write - error FR 2! (status:00) disable ci demux set source [CI] RESET [CI] init try #0 [CI] Init complete after 1 tries handle_spdu() handle_spdu() handle_spdu() handle_spdu() LocECM : input:open id:0 CMD: 1 len: 64 open id:0 (40) 02 01 05 driver free 06 08 30 30 30 3card present 0 38 30 30 30 07ioctl set special mode to 0 04 30 30 30 30 03 2b d2 01 01 ee 6e 7e 92 7e 1f 2c d1 5b 6f 30 2f ce 9d 73 ba b 8 d5 9c 2c e5 e8 13 e3 92 67 fb 74 4d 5a 0b 50 2open id:1 4 10 ef e3 f5 14open id:1 80 b6 LocECM driver free : CMD_KEY_ASK: card present size: 64 (real: ioctl set special mode to 0 64) LocECM : provid: 8000, keynr: 00 ecmdata: 1 SoftCA : Invoked ... CR: unable to read ATR header CR: unable to read ATR header LocalECM: VIACCESS decoding ... DEB: key: 8BE3AA259E563833 LocECM : Key OK. LocECM : DW OK sent. handle_spdu() handle_spdu() enable ci demux set source handle_spdu() [CI] write - error FR 2! (status:00) disable ci demux set source [CI] RESET [CI] init try #0 [CI] Init complete after 1 tries handle_spdu() handle_spdu() handle_spdu() handle_spdu() handle_spdu() handle_spdu() enable ci demux set source handle_spdu() [CI] write - error FR 2! (status:00) disable ci demux set source [CI] RESET [CI] init try #0 LocECM : input:open id:0 CMD: 1 len: 64 open id:0 (40) 02 01 05 driver free 06 08 30 30 30 3card present 0 38 30 30 30 07ioctl set specia 04 30 30 30 30 03 2b d2 01 01 ee 6e 7e 92 7e 1f 2c d1 5b 6f 30 2f ca d5 9f b2 e c d9 22 a3 e4 49 92 62 93 42 7b 55 4d 5a 26 8f dopen id:1 a 4e 39 26 ce dfopen id:1 80 b6 LocECM driver free : CMD_KEY_ASK: card present size: 64 (real: ioctl set special mode to 0 64) LocECM : provid: 8000, keynr: 00 ecmdata: 1 SoftCA : Invoked ... CR: unable to read ATR header CR: unable to read ATR header LocalECM: VIACCESS decoding ... DEB: key: 8BE3AA259E563833 LocECM : Key OK. LocECM : DW OK sent. [CI] Init complete after 1 handle_spdu() Dr handle_spdu() handle_spdu() 00500000 0 handle_spdu() handle_spdu()elocated to: handle_spdu()71F8 enable ci demux set sourcet: 00514128 0051 handle_spdu() [CI] write - error FR 2! (status:00)04C2C disable ci: 0040 demux set source [CI] RESET avail ra [CI] init try #02000000 [CI] Init complete after 1 tries load: console=null root=/dev/mt handle_spdu()tfstype=squas handle_spdu() handle_spdu() handle_spdu() Uncomp handle_spdu()..done. handle_spdu() Now b enable ci kernel demux set source Welcome xp0_clk_stopial access. LocECM : Not enought chars to read.ou may start a HTTP session now if y LocECM : Connection closed. VIDEO_STOP, state 1P/1.0 200 OK [AVS] FBLK:2ection: clos set_vsw1:3 Co [AVS] FNC:0text/plain disable continuous tone Dreambox DM7000 handle_spdu() Dr handle_spdu() handle_spdu() 00500000 0 disable ci demux set source [CI] RESET [CI] init try #0 [CI] Init complete after 1 tries handle_spdu() handle_spdu() handle_spdu() handle_spdu() handle_spdu() handle_spdu() enable ci demux set source handle_s [CI] write - error FR 2! (status:00) disable ci demux set source [CI] RESET [CI] init try #0 [CI] Init complete after 1 tries handle_spdu() Dreambox DM7000 loaded at: 00500000 006161F8 relocated to: 00400000 005161F8 board data at: 00513128 00513168 relocated to: 00404BEC 00404C2C zimage at: 00405128 005128D9 avail ram: 00517000 02000000 Linux/PPC load: console=null root=/dev/mtdblock5 ro rootfstype=squashfs console= ttyS0,115200 Uncompressing Linux...done. Now booting the kernel Linux version 2.4.20 (ghost@client) (gcc version 3.2.1) #4 Mon Sep 8 21:33:52 CE ST 2003 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=null root=/dev/mtdblock5 ro rootfstype=squashfs con sole=ttyS0,115200 Console: colour dummy device 80x25 Calibrating delay loop... 251.49 BogoMIPS Memory: 29764k available (1920k kernel code, 596k data, 92k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket OCP uart ver 1.6.2 init complete Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. © 2001 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-proc.o version 2.6.1 (20010825) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at 0xe0040000 (irq = 20) is a 16550A ttyS01 at 0xe0000000 (irq = 21) ttyS02 at 0xe00e0000 (irq = 31) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ttyS02 at 0xe ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xxiform Multi-Platform E-IDE driver Revision: 6.31 IBM IDE ocp driver version 2.2suming 50MHz system bus speed ide_redwood: waiting for drive ready......Drive spun up hda: Maxtor 6Y120L0, ATA DISK drive ide_red ide0 at 0xc308a1f8-0xc308a1ff,0xc308a1f6 on irq 25 hda: not ready for 48 bit yet... force 28bit LBA ide0 at 0xc308a1f8-0xc3 hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(33)da: not ready for 48 bit yet... force 28bit LBA Partition check: /dev/ide/host0/bus0/target loo MEM:8192b NOWAIT:0 ADDR 00:09:34:0f:95:bb smc91111.c:v1.0saa 08/22/01 by SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 MEM:8192b NOWAIT:0 ADDR 00:09: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2river Revision: 1.00 kmod: failed kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed dreambox: flash mapping: 800000 at 7f800000er, errno = 2 disable flash VPP Creating 6 MTD partitions on 0x00000000-0x00800000 : "DreamBOX (w/ bootloader)" 0x00600000-0x007c 0x00120000-0x00600000 : "DreamBOX SquashedFS" 0x007c0000-0x00800000 : "Dr usb.c: registered new driver usbdevfs 0x00000000-0x00 usb.c: registered new driver hubr)" usb-ohci.c: USB OHCI at membase 0xc3895000, IRQ 18amBOX (w/ bootloader)" usb-ohci.c: usb-ocp, builtin0000-0x00600000 : "DreamBOX usb.c: new USB bus registered, assigned bus number 1 usb.c: registered new driver usbdevfs hub.c: USB hub found usb.c: registe hub.c: 2 ports de usb.c: registered new driver usb-storage hid-core USB Mass Storage support registered.k <vojtech@suse.cz> mice: PS/2 mouse device common for all mice hid-core.c: USB HID support drivers IBM IIC driver v2.0 Initial ibm-iic: using compatibility value for OPB freq, fix your board specific setupregistered new driver usb-storage USB i2c-dev.o: Registered 'IBM IIC' as minor 0 mice: PS/2 mouse i2c-core.o: adapter IBM IIC registered as ad NET4: Linux TCP/IP 1.0 for NET4.0setup IP Protocols: ICMP, UDP, TCP, IGMP i2c-dev.o: Registe IP: routing cache hash table of 512 buckets, 4Kbytes i2c-core.o: adapter IBM IIC registered TCP: Hash tables configured (established 2048 bind 4096) ibm-iic1: using standard (100 kHz) mode NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.1.0 for NET4.0 IP VFS: Mounted root (squashfs fil Warning: loading fb will taint tfb: loaded Mounte he kernel: non-Gdummycon (0)PL license - pro<3>fbcon_setup: No support for fontw init started: BusyBox v0.60.5 (2003.06.03-15:1 idth 8 multi prietaryary See fbcon_setup: type 0 (aux 0, depth 8) not supported Using /lib/modules/2.4.20/misc/fb.o http://www.tux.org/lkml/#export-tainted for information about tainted modules he kernel: non-Gdummycon (0)PL license - pro Warning: loading fb will taint the kernel: forced load lesles Warning: loading dream will taint the kernel: forced loadarning: loading sdev will taintsdev: Loading sdev module i2c-core.o: driver DreamBOX frontprocessor registered. the kernel: forced load S i2c-core.o: client [fp] registered to adapter [iBM IIC](pos. 0).tainted modu fp: attaching fp at 0xee to adapter IBM IICib/modules/2.4.20/mis demux: initedfor informati xp0_clk_stopted modu [XP1] Init [XP1] 896KBytes used for Queues les i2c-core.o: driver stv0299 DVB demodulator registered.ad [CI] insert detectedver DreamBOX frontpr i2c-core.o: client [stv0299] registered to adapter [iBM IIC](pos. 1). i2c-core.o: client [fp] registered to adapter [iBM IIC](pos. 0). registering frontend... disable continuous toneaching fp at 0xee to ad already got one. i2c-core.o: driver Mitel tuner driver registered. core: Loaded IBM STB04xxx core driver i2c-core.o: client [Dreambox Tuner Driver] registered to adapter [iBM IIC](pos.event's ... registering device. demux: in 2). alrea . the kernel: non-i2c-core.o: client [avs] registered to adapter [iBM IIC](pos. 3) i2c-core.o: client [Dreambox Tuner Dr .e GPL license - pravs: attaching avs at 0x94 oprietary Seeto adapter IBM IIC.o: LCD driver (KS0713)http://www.tux.org/lkml/#export-tainted for information about tainted modules/08/27 22:38:24 ghost Exp $ Warning: loading avs will taint the kernel: forced load . GPL lic non-GPL license - proprietary 0x94 oprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modu http://www.tux.org/lkml/#export-tainted for information about tainted modu les Warning: loading dvb_net will taint the kernel: forced load Warning: loading avs will taint the kernel: Using /lib/modules/2.4.20/misc/ca.o Usin Warning: loading ca will taint the kernel: forced load Warning: loading ca will taint the kernel: See http://www.tux.org/lkml/#export-tainted for information about tainted moduww.tux.org/lkml/#export-tainted fo les6) Using /lib/modules/2.4.20/misc/sci_drv.o tainted modules Warning: loading sci_drv will taint the kernel: no licensead SeINT:8/lib/modu e http://www.tuxenable_irq(8) unbalanced Warning: loadin .org/lkml/#exporINT:16T: $Id: dvb_net.c,v 1. t-tainted for inenable_irq(16) unbalanced formation about tainted modules int the kernel: dv Warning: loading sci_drv will taint the kernel: forced loadense - proprietary BusyBox is a multi-call binary that combines many common Unix Usage: busybox [function] [arguments]... utilities into a single executable. Most people will create a BusyBox is a multi-call binary link to busybox for each function they wish to use, and BusyBox utilities into a single executable. will act like whatever it was invoked as. Currently defined functions:h function they wish to use, [, adjtimex, ash, awk, basename, bunzip2, busybox, bzcat, c will act like what e, id, ifconfig,VFS: Can't find a valid FAT filesystem on dev 03:01. init, insmod, kill, killall, klogd, ln,printf, ps, pwd, rdate, readlink, logger, ls, lsmod, mesg, mkdir, mknod, mkswap, modprobe, more, reboot, reset, rm, rmdir, rm sed, sh, sleep, sUnable to identify CD-ROM format.ich, whoami, xargs, ort, strings, stty, swapoff, swapon, sync, syslogd,at VFS: Can't find ext3 filesyste tail, tar, tee, telnet, test, time, top, touch, tr, traceroute,mfs: wrong magic FAT: bogus logical sector size 0 true, tty, udhcpc, umount, uname, uniq, unix2dos, uptime, usleep,v 03:01. Unable to id vi, wc, wget, which, whoami, xargs, yes, zcat reiserfs: checking transaction log (device 03:01) .. mount: Mounting /hdd/var on /var failed: No such file or directory /dev/ide/host0/bus0/target0/lun0/disc: setting standby to 120 (10 minutes) /dev/ide/host0/bus0/target0/lun0/disc: setting acoustic management to 128 acoustic = 128 (128=quiet ... 254=fast) /etc/init.d/rcS: 87: /bin/smbd: not found /etc/init.d/rcS: 88: /bin/nmbd: not found /var/etc/init: 3: /bin/smbd: not found /var/etc/init: 4: /bin/nmbd: not found /var/etc/init: 14 Please press Entfbcon_setup: No support for fontwidth 8 er to activate tfbcon_setup: type 0 (aux 0, depth 8) not supported his console. fbcon_setup: No support for fontwidth 8 fbcon_setup: type 0 (aux 0, depth 8) not supported fbcon_setup: No support for fontwidth 8 fbcon_setup: type 0 (aux 0, depth 8) not supported fbcon_setup: No support for fontwidth 8 fbcon_setup: type 0 (aux 0, depth 8) not supported fbcon_setup: No support for fontwidth 8 fbcon_setup: type 0 (aux 0, depth 8) not supported
Aanbevolen berichten
Maak een account aan of log in om te reageren
Je moet een lid zijn om een reactie te kunnen achterlaten
Account aanmaken
Registreer voor een nieuwe account in onze community. Het is erg gemakkelijk!
Registreer een nieuwe accountInloggen
Heb je reeds een account? Log hier in.
Nu inloggen