Flash probleem

[Gast]

Nadat ik de nieuwe image van Ronald heb gebruikt, wil de box niet verder booten dan de afbeelding.

Via de site van Sjerom heb ik de handelingen gedaan zoals vermeld op zijn net om middels Telnet de flash opnieuw te verwijderen.

Echter nadat ik Linux/PPC load: console=none root=/dev/mtdblock/0 heb verwijderd voor :console=ttyS0,115200 root=/dev/mtdblock/0 krijg ik de volgende melding: Warning: unable to open an initial console.

Kernel panic: No init found. Try passing init= option to kernel.

<0>Rebooting in 180 seconds..

Waarna de box na 180 sec opnieuw opstart.

 

Hoe kan ik dit probleem oplossen.

 

René

[Gast]

Serieel opnieuw flashen is denk ik de enige oplossing.

Mischien dat iemand anders nog een beter idee heeft, maar in jou geval zou ik toch de seriele kabel gebruiken.

 

suc6

Ruud

[Ronaldd]

Je moet die powerpc load line niet weghalen, maar je moet dat 'console=ttyS0,115200' er achter plaatsen, met een spatie er tussen.

 

Ronald

[Gast]

Oke dat heb ik gedaan en dan zegt hij nog steeds: Warning: unable to open an initial console.

Volledigheids halve hier de complete regel zoals ik in geef:

console=ttyS0,115200 root=/dev/mtdblock/0

 

Volgens mij moet dit goed zijn, maar onderstaande meldingen verschijnen dan in mijn scherm:

Linux/PPC load: console=ttyS0,115200 root=/dev/mtdblock/0

Uncompressing Linux...done.

Now booting the kernel

Linux version 2.4.20 (ghost@client) (gcc version 3.2.3) #2 Mo Dez 22 16:28:22 CE

T 2003

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0,115200 root=/dev/mtdblock/0

Console: colour dummy device 80x25

Calibrating delay loop... 251.49 BogoMIPS

Memory: 29760k available (1920k kernel code, 600k data, 92k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

PCI: Probing PCI hardware

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society

Initializing RT netlink socket

OCP uart ver 1.6.2 init complete

Starting kswapd

Journalled Block Device driver loaded

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.1. © 2001 Red Hat, Inc., designed by Axis Communications AB.

i2c-core.o: i2c core module

i2c-dev.o: i2c /dev entries driver module

i2c-core.o: driver i2c-dev dummy driver registered.

i2c-proc.o version 2.6.1 (20010825)

pty: 256 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) wit

abled

ttyS00 at 0xe0040000 (irq = 20) is a 16550A

ttyS01 at 0xe0000000 (irq = 21) is a 16550A

ttyS02 at 0xe00e0000 (irq = 31) is a 16550A

Uniform Multi-Platform E-IDE driver Revision: 6.31

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

IBM IDE ocp driver version 2.2

ide_redwood: waiting for drive ready......Drive spun up

hda: Maxtor 6Y080L0, ATA DISK drive

ide0 at 0xc308a1f8-0xc308a1ff,0xc308a1f6 on irq 25

hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(33)

Partition check:

/dev/ide/host0/bus0/target0/lun0: p1

loop: loaded (max 8 devices)

smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com)

eth0: SMC91C11xFD(r:1) at 0xc3090300 IRQ:28

MEM:8192b NOWAIT:0 ADDR 00:09:34:0f:8c:3e

SCSI subsystem driver Revision: 1.00

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

dreambox: flash mapping: 800000 at 7

disable flash VPP

Creating 6 MTD partitions on "DreamBOX rev3+":

0x00000000-0x00600000 : "DreamBOX cramfs"

0x00600000-0x007c0000 : "DreamBOX jffs2"

0x007c0000-0x00800000 : "DreamBOX OpenBIOS"

0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"

0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"

0x00120000-0x00600000 : "DreamBOX SquashedFS"

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-ohci.c: USB OHCI at membase 0xc3895000, IRQ 18

usb-ohci.c: usb-ocp, builtin

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

usb.c: registered new driver hiddev

usb.c: registered new driver hid

hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>

hid-core.c: USB HID support drivers

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

USB Mass Storage support registered.

mice: PS/2 mouse device common for all mice

IBM IIC driver v2.0

ibm-iic: using compatibility value for OPB freq, fix your board spec

i2c-dev.o: Registered 'IBM IIC' as minor 0

i2c-core.o: adapter IBM IIC registered as adapter 0.

ibm-iic0: using standard (100 kHz) mode

ibm-iic: using compatibility value for OPB freq, fix your board specific setup

i2c-dev.o: Registered 'IBM IIC' as minor 1

i2c-core.o: adapter IBM IIC registered as adapter 1.

ibm-iic1: using standard (100 kHz) mode

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 204

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (cramfs filesystem) readonly.

mount_devfs_fs(): unable to mount devfs, err: -2

Freeing unused kernel memory: 92k init

Warning: unable to open an initial console.

Kernel panic: No init found. Try passing init= option to kernel.

<0>Rebooting in 180

 

René

[Gast]

Is er iemand die mij hiermee wil helpen zodat ik de box weer kan gebruiken?